How long is the detection distance of the proximity sensor

The sensing distance of the proximity sensor varies depending on the size and material of the detection object. The sensing distance increases with the shape of the detection object. When the volume reaches a certain value, the sensing distance no longer increases with the shape of the detection object, and becomes a fixed value. Generally, the smallest detection object that reaches a fixed sensing distance is called a standard detection object. The standard detection object is generally a square made of iron (Fe360) with the thickness of 1mm, and the larger of the sensing surface diameter and 3 times the sensing distance is taken as the side length.

What needs to be paid attention to in the sensor selection?

In terms of parameters, it is mainly necessary to determine the main parameters such as product appearance and size, detection distance, operating voltage, output mode (NPN/PNP), output form (normally open/normally closed), and also to ensure the outlet form (direct outlet/connector type), cable length, bending resistance, frequency requirements, ambient temperature requirements, waterproof and dust-proof requirements (IP degree) and other parameters of the sensor.

What is the meaning of shielded and non-shielded for proximity sensors?

The shielded type sensor can be embedded in metal for use, while the non-shielded type cannot be embedded in metal, but its operating distance for detection is longer than the shielded type. Shielded type installation: The sensor is embedded in the metal base, and its effective sensing working surface is flush with the base surface. Non-shielded type installation: The sensor is not embedded in the metal base, and its effective sensing working surface must keep a certain space from its base. For proximity sensors of the same specifications, the non-shielded type can obtain the maximum sensing distance. The advantages of the sensor with shielded type installation are that they have better mechanical protection performance and stronger anti-interference ability than the sensor with unshielded type installation. The sensor with shielded type installation has approximately 69% of the acting distance compared to the sensor with non-shielded type installation.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-2C08-P11

type Detection Head Size Dimension Detection Distance L1 Output Pattern CAD Days to Ship

Specification/Dimensions

type
- C-2C08
- C-2C12
Clear
Detection Head Size Dimension(mm)
M8X1.0

M12X1.0
Clear
Detection Distance L1(mm)
4

8.0
Clear
Output Pattern
- NPN (Normally Open)
- PNP (Normally Open)
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Proximity Sensor, Long Detection Range, Unshielded, Bend Tolerance, Oil Resistant Cable (C-2C08-P11)

Name: Proximity Sensor, Long Detection Range, Unshielded, Bend Tolerance, Oil Resistant Cable
Brand: MISUMI
Price: 1770.77 INR
Availability: InStock

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (3 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Proximity Sensor, Long Detection Range, Unshielded, Bend Tolerance, Oil Resistant Cable
These Proximity Sensors are an economy item, The price is cheaper than the MISUMI standard product. They offer a wide variety of sizes to choose from.
[Feature]
● Shape : Cylindrical Shape with Screw and Unshielded
● Detection Head Size Dimension : M8x1.0 and M12X1.0
● Detection Distance (mm.): 4 and 8.0
● Output Method : NPN or PNP (Normally Open)
● Wire Length (m.): 2
[Application]
It is an important component in the automation system ,its primary function is to detect objects without requiring any physical contact.

Economy Proximity Sensor

Extended DetectionUnshielded DesignBend Tolerance

- Available with multiple detection distances.

- The unshielded type enhances the detection distance and sensitivity. Optimal for detecting non-metallic objects or where a longer detection range is needed.

- Equipped with oil-resistant cables, suitable for harsh industrial environments. Ensures reliable performance in settings with exposure to oils and chemicals.

- Available in NPN (Normally Open) and PNP (Normally Open) output types. Compatible with a wide range of control systems and devices, providing flexibility in integration and application.

- Features various switching frequencies depending on detection distance.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Proximity Sensors, Proximity switches are a type of position switch designed for operation without direct mechanical contact with moving parts. When an object approaches the sensing surface and reaches the operation distance, the switch can work without any mechanical contact or pressure applied, thus driving the DC electrical appliance or providing control commands to the computer (plc). Proximity switches are switch-type sensors (i.e. contactless switches) that incorporate the features of travel switches and microswitches, and provide the sensing capability. They boast reliable operation, stable performance, fast frequency response, long service life, strong anti-interference capability, waterproofness, anti-vibration, corrosion resistance, etc.

Product Overview

Product Comparison

Model	MISUMI Standard Product EMZ3-12S	Economy Series
Model	MISUMI Standard Product EMZ3-12S	C-2C08	C-2C12
Shape	Thread Type M12	Thread Type M8	Thread Type M12
Shape	Shielded Type	Unshielded Type
Detection Distance	3mm	4mm	8mm
Output Format	NPN N.O.	NPN N.O. / PNP N.O.
Sensor Part Dimensions	M12 x 47	M8 x 30	M12 x 35
Power Supply	DC 3-wire	DC 3-wire
Rated Operating Voltage	12/24VDC (10 to 30VDC) Allowable ripple rate 10% p-p or below	12/24VDC (10 to 30VDC) Allowable ripple rate 10% p-p or below
Voltage Drop	1.5V or less	1.5V or less	2.0V or less
Hysteresis	20% or less	15% or less
Operating Ambient Temperature	-25 to +70°C	-25 to +70°C
Temperature Characteristics	Within ±15% (for operation at +23°C)	Within ±10% (for operation at +25°C)
Protection Rating	IP67	IP67
Case Material	PBT	ABS

Dimensional Drawing

C-2C08-N11
Dimensional Drawing

C-2C12-N11/P11
Dimensional Drawing

Specification Table

Proximity Sensors Model (double non-shielded type)	Diameter	Wire Length	Detection Distance	Output Method	Operation Mode	Switching frequency
C-2C08-N11	M8	2M	4mm	NPN Output	NO	1KHz
C-2C08-P11				PNP Output
C-2C12-N11	M12		8mm	NPN Output		500Hz
C-2C12-P11				PNP Output

Proximity Sensors Types

Operation Mode (NO)

Including Cable 2M

DC 3-Wire Type (NPN)

DC 3-Wire Type (PNP)

Part Number

C-2C08-N11

C-2C12-N11

C-2C8-P11

C-2C12-P11

Detection Distance

4mm

8mm

4mm

8mm

Operating Voltage

10~30VDC

Allowable Pulse Voltage

<10%

No-load current

<10mA

Maximum load current

200mA

Leakage current

<0.01mA

Voltage drop

<1.5V

<2.0V

<1.5V

<2.0V

Switching frequency

1KHZ

500HZ

1KHZ

500HZ

Response time

0.2ms

0.5ms

0.2ms

0.5ms

Switching hysteresis

<15% (Sr)

Repetitive Accuracy

<1.0% (Sr)

Protection Rating

IP67

Operating Temperature

-25°C~+70°C

Temperature drift

<10% (Sr)

Short Circuit protection

YES

Overcurrent

220mA

Detection Surface Material

ABS

Product Feature

Proximity Sensors DC 3-Wire Type NPN Output
Product Feature

Z_D: Surge Absorbing Zener Diode
T_r: NPN Output Transistor
D: Diode for Power Supply Reverse Connection Protection

Proximity Sensors DC 3-Wire Type PNP Output
Product Feature

Z_D: Surge Absorbing Zener Diode
T_r: PNP Output Transistor
D: Diode for Power Supply Reverse Connection Protection

Proximity Sensors Standard test equipment with assured quality.

Usage Method

Proximity Sensors Shielded
Usage Method

The shielded type has the magnetic flux concentrated in the front of the sensor, with the range of the inductive magnetic field toward the front of the proximity switch.

Proximity Sensors Non-shielded
Usage Method

The unshielded coil flux can increase the detection distance, but it is easy to be affected by surrounding metals because there is no object protection
Attention is required during installation

Proximity Sensors Mounting Method

Proximity Sensors Single shielded type
Usage Method

To prevent signal interference, the distance from the sensor surface to the metal detection object is ≥3 Sn (Sn is the sensor’s sensing distance), and the distance between two adjacent proximity sensors is ≥D (D is the sensor’s diameter).

Proximity Sensors Single non-shielded type
Usage Method

No protection is provided around the induction coil, so the distance to be guaranteed between the sensing surface and the mounting surface shall be Y (M5~M8: Y=6 mm, M12: Y=9 mm).
The distance between the sensing surface and the metal detection object shall be ≥3 Sn, and the distance between two adjacent proximity sensors shall be ≥2D (D is the sensor’s diameter).

Proximity Sensors Face-to-face mounting method
Usage Method

For face-to-face mounted sensors, the minimum distance between two sensing surfaces shall be ≥ 6 Sn.

Proximity Sensors Double-distance shielded type
Usage Method

Iron and steel X=0.2D
Other metal X=0.1D
*Thickness of detection object: 1 mm

Proximity Sensors Double-distance shielded type
Usage Method

Dimension D			Y (MM)
M8			12
M12			15

Precautions

Sensor Attenuation Coefficient

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-2C08-P11

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Detection Head Size Dimension (mm)	Detection Distance L1 (mm)	Output Pattern
	₹ 1,770.77	1 Piece(s)	Available	Same day	10	M8X1.0	4	PNP (Normally Open)

Brand Introduction

MISUMI, the head office company, has been providing customers with various high-quality parts such as automation parts, Proximity Sensors, mold parts, electronic parts, tool & consumables, etc. quickly and accurately since its establishment in Japan in 1963. By compiling product catalogs independently and establishing a marketing system for direct sales of products, a low-cost business operation mode has been created, and by making annual product plans according to customers' opinions and requirements, MISUMI brand-name products with high quality level have been continuously developed

Basic Information

Shape	Screw	Detected Object	Magnetic Metal	Shield	Non Shield
Protection Structure (IEC)	IP67	Power Supply and Output Specifications	3-wire type	External Shape	Cylindrical Shape

Please check the type/dimensions/specifications of the part C-2C08-P11 in the Proximity Sensor, Long Detection Range, Unshielded, Bend Tolerance, Oil Resistant Cable series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: How long is the detection distance of the proximity sensor: Answer: The sensing distance of the proximity sensor varies depending on the size and material of the detection object. The sensing distance increases with the shape of the detection object. When the volume reaches a certain value, the sensing distance no longer increases with the shape of the detection object, and becomes a fixed value. Generally, the smallest detection object that reaches a fixed sensing distance is called a standard detection object. The standard detection object is generally a square made of iron (Fe360) with the thickness of 1mm, and the larger of the sensing surface diameter and 3 times the sensing distance is taken as the side length.
Question: What needs to be paid attention to in the sensor selection?: Answer: In terms of parameters, it is mainly necessary to determine the main parameters such as product appearance and size, detection distance, operating voltage, output mode (NPN/PNP), output form (normally open/normally closed), and also to ensure the outlet form (direct outlet/connector type), cable length, bending resistance, frequency requirements, ambient temperature requirements, waterproof and dust-proof requirements (IP degree) and other parameters of the sensor.
Question: What is the meaning of shielded and non-shielded for proximity sensors?: Answer: The shielded type sensor can be embedded in metal for use, while the non-shielded type cannot be embedded in metal, but its operating distance for detection is longer than the shielded type. Shielded type installation: The sensor is embedded in the metal base, and its effective sensing working surface is flush with the base surface. Non-shielded type installation: The sensor is not embedded in the metal base, and its effective sensing working surface must keep a certain space from its base. For proximity sensors of the same specifications, the non-shielded type can obtain the maximum sensing distance. The advantages of the sensor with shielded type installation are that they have better mechanical protection performance and stronger anti-interference ability than the sensor with unshielded type installation. The sensor with shielded type installation has approximately 69% of the acting distance compared to the sensor with non-shielded type installation.

Product variants

Part Number
C-2C08-N11
C-2C12-N11
C-2C12-P11

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Detection Head Size Dimension (mm)	Detection Distance L1 (mm)	Output Pattern
₹ 1,917.07	1 Piece(s)	Available	Same day Stock	10	M8X1.0	4	NPN (Normally Open)
₹ 1,886.78	1 Piece(s)	Available	Same day Stock	10	M12X1.0	8.0	NPN (Normally Open)
₹ 1,886.78	1 Piece(s)	Available	Same day Stock	10	M12X1.0	8.0	PNP (Normally Open)

Search by Category / Brand

Search by Category

How can we improve?