How long is the detection distance of the proximity sensor

The sensing distance of the proximity sensor varies depending on the size and material of the detection object. The sensing distance increases with the shape of the detection object. When the volume reaches a certain value, the sensing distance no longer increases with the shape of the detection object, and becomes a fixed value. Generally, the smallest detection object that reaches a fixed sensing distance is called a standard detection object. The standard detection object is generally a square made of iron (Fe360) with the thickness of 1mm, and the larger of the sensing surface diameter and 3 times the sensing distance is taken as the side length.

What needs to be paid attention to in the sensor selection?

In terms of parameters, it is mainly necessary to determine the main parameters such as product appearance and size, detection distance, operating voltage, output mode (NPN/PNP), output form (normally open/normally closed), and also to ensure the outlet form (direct outlet/connector type), cable length, bending resistance, frequency requirements, ambient temperature requirements, waterproof and dust-proof requirements (IP degree) and other parameters of the sensor.

What is the meaning of shielded and non-shielded for proximity sensors?

The shielded type sensor can be embedded in metal for use, while the non-shielded type cannot be embedded in metal, but its operating distance for detection is longer than the shielded type. Shielded type installation: The sensor is embedded in the metal base, and its effective sensing working surface is flush with the base surface. Non-shielded type installation: The sensor is not embedded in the metal base, and its effective sensing working surface must keep a certain space from its base. For proximity sensors of the same specifications, the non-shielded type can obtain the maximum sensing distance. The advantages of the sensor with shielded type installation are that they have better mechanical protection performance and stronger anti-interference ability than the sensor with unshielded type installation. The sensor with shielded type installation has approximately 69% of the acting distance compared to the sensor with non-shielded type installation.

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(2 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-Q17-N01

Output Pattern type CAD Days to Ship

Specification/Dimensions

Output Pattern
- NPN Type (Normally Closed)
- NPN Type (Normally Open)
Clear
type
- C-Q17
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Proximity Sensors Square Body

Name: Proximity Sensors Square Body
Brand: MISUMI
Availability: InStock

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (3 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Proximity Sensors Square Body
These Proximity Sensors are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Shape : Sqaure
● Detection Direction : Front Type
● Detection Distance (mm.): 5
● Output Method : NPN (Can select between Normally Open and Normally Closed)
● Wire Length (m.): 2
[Application]
It is an important component in the automation system ,its primary function is to detect objects without requiring any physical contact.

Economy Proximity Sensors

NPN Output Compact Square Design High Protection Rating

- Available in Normally Open (NO) and Normally Closed (NC) configurations. Flexible integration into existing systems, simplifying the design and installation process.

- Space-saving square body design. Specific dimensions provided.

- Operates within specified voltage range. Allows for a wide range of power supply options, with a specified maximum load current.

- IP67 rated for dust and water resistance. Durable and reliable in challenging conditions, reducing maintenance costs and downtime.

- Response time of 0.5ms. Quick switching frequency of 500Hz.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Proximity Sensors switches are a type of position switch designed for operation without direct mechanical contact with moving parts. When an object approaches the sensing surface and reaches the operation distance, the switch can work without any mechanical contact or pressure applied, thus driving the DC electrical appliance or providing control commands to the computer (plc). Proximity switches are switch-type sensors (i.e. contactless switches) that incorporate the features of travel switches and microswitches, and provide the sensing capability. They boast reliable operation, stable performance, fast frequency response, long service life, strong anti-interference capability, waterproofness, anti-vibration, corrosion resistance, etc.

Product Overview

Product Comparison

Model		MISUMI Standard Product EMX4	Economy Series C-Q17
Detection Distance		4mm	5mm
Output Format		NPN N.O. (Normally Open)	NPN N.O. (Normally Open)/NPN N.C. (Normally Closed)
Sensor Part Dimensions	Sensor Size	27mm x 12mm x 12mm	29.4mm x 17mm x 17mm
	Mounting Holes	φ3.2	2 x φ3.4
Power Supply		DC 3-wire	DC 3-wire
Rated Operating Voltage		12/24VDC (10 to 30VDC) Allowable ripple rate 3% p-p or below	12/24VDC (10 to 30VDC) Allowable ripple rate 10% p-p or below
Voltage Drop		1V or less	2.5V or less
Switch Hysteresis		Approx. 20% or less	15% or less
Operating Ambient Temperature		-10 to +50°C	-25 to +70°C
Temperature Characteristics		Within ±20% (for operation distance at +23°C)	Within ±10% (for operation at +25°C)
Protection Rating		IP67	IP67
Case Material		Polycarbonate	ABS

[ ! ] For other detailed specifications, see the standards table below.

Dimensional Drawing

Specification Table

Proximity Sensors Style	Wire Length	Detection Distance	Output Method	Operation Mode
C-Q17-N01	2M	5mm	NPN Output	NO
C-Q17-N02				NC

Proximity Sensors Types	DC 3-Wire Type (NPN)
	Front Detection Type
	Operation Mode
Part Number	NO	NC
	C-Q17-N01	C-Q17-N02
Detection Distance	5mm
Operating Voltage	10~30VDC
Allowable Pulse Voltage	<10%
No-load current	<10mA
Maximum load current	200mA
Leakage current	<0.01mA
Voltage drop	<2.5V
Switching frequency	500HZ
Response time	0.5ms
Switching hysteresis	<15% (Sr)
Repetitive Accuracy	<1.0% (Sr)
Protection Rating	IP67
Operating Temperature	-25°C~+70°C
Temperature drift	<10% (Sr)
Short Circuit protection	YES
Overcurrent	220mA
Detection Surface Material	ABS
Wire Length	2 m

Product Feature

D: Reverse power polarity protection diode
T_r: NPN output transistor
Z_D: Surge absorbing Zener diode

Proximity Sensors Wiring Diagram
Product Feature

Standard test equipment with assured quality.

Precautions

Proximity Sensors Attenuation Coefficient
Precautions

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-Q17-N01
C-Q17-N02

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Output Pattern
	₹ 1,206.00	1 Piece(s)	Available	Same day	10	NPN Type (Normally Open)
	₹ 1,350.27	1 Piece(s)	Available	Same day	10	NPN Type (Normally Closed)

Brand Introduction

MISUMI, the head office company, has been providing customers with various high-quality parts such as automation parts, Proximity Sensors, mold parts, electronic parts, tool & consumables, etc. quickly and accurately since its establishment in Japan in 1963. By compiling product catalogs independently and establishing a marketing system for direct sales of products, a low-cost business operation mode has been created, and by making annual product plans according to customers' opinions and requirements, MISUMI brand-name products with high quality level have been continuously developed

Basic Information

Shape	Square	Detected Object	Magnetic Metal	Operating Environment	Standard
Detecting Surface	Front Surface Detection	Protection Structure (IEC)	IP67	Detection Distance L1(mm)	5
Power Supply and Output Specifications	3-wire type

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: How long is the detection distance of the proximity sensor: Answer: The sensing distance of the proximity sensor varies depending on the size and material of the detection object. The sensing distance increases with the shape of the detection object. When the volume reaches a certain value, the sensing distance no longer increases with the shape of the detection object, and becomes a fixed value. Generally, the smallest detection object that reaches a fixed sensing distance is called a standard detection object. The standard detection object is generally a square made of iron (Fe360) with the thickness of 1mm, and the larger of the sensing surface diameter and 3 times the sensing distance is taken as the side length.
Question: What needs to be paid attention to in the sensor selection?: Answer: In terms of parameters, it is mainly necessary to determine the main parameters such as product appearance and size, detection distance, operating voltage, output mode (NPN/PNP), output form (normally open/normally closed), and also to ensure the outlet form (direct outlet/connector type), cable length, bending resistance, frequency requirements, ambient temperature requirements, waterproof and dust-proof requirements (IP degree) and other parameters of the sensor.
Question: What is the meaning of shielded and non-shielded for proximity sensors?: Answer: The shielded type sensor can be embedded in metal for use, while the non-shielded type cannot be embedded in metal, but its operating distance for detection is longer than the shielded type. Shielded type installation: The sensor is embedded in the metal base, and its effective sensing working surface is flush with the base surface. Non-shielded type installation: The sensor is not embedded in the metal base, and its effective sensing working surface must keep a certain space from its base. For proximity sensors of the same specifications, the non-shielded type can obtain the maximum sensing distance. The advantages of the sensor with shielded type installation are that they have better mechanical protection performance and stronger anti-interference ability than the sensor with unshielded type installation. The sensor with shielded type installation has approximately 69% of the acting distance compared to the sensor with non-shielded type installation.

Search by Category / Brand

Search by Category

How can we improve?