There is no indication or output action after the instrument is powered on.

1. Please check if there is any fault in the instrument power cable. 2. Check if the power supply and the input power supply have the same polarity.

The PV window shows 'HHH' or 'LLL' after the instrument is powered on, indicating an abnormality.

1. Please check if there is any fault in the instrument power cable. 2. Check if the power supply and the input power supply have the same polarity. 3. Check if the sensor is connected reversely or damaged (open circuit or short circuit).

There is no output after the instrument is powered on, but the indicator light displays normally.

1. Please check if there is any fault in the instrument power cable. 2. Check if the output mode and external load are damaged (open circuit or short circuit). 3. Check if the external load of the instrument matches.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-MTCTRS

type CAD Days to Ship

Specification/Dimensions

type
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Temperature Controllers Standard Type

Name: Temperature Controllers Standard Type
Brand: MISUMI
Availability: InStock

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (3 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Temperature Controllers Standard Type
Temperature controllers are devices used to adjust the temperature of the controlled device to the set target temperature
[Feature]
● Input : Thermocouple (K, J, R, T, N, S, B) and Resistance thermometer (Pt100Ω / JPt100Ω.)
● Output : Relay contact output or SSR drive output free switching
● Power Supply Voltage : AC100～240VAC~50/60Hz±10%
● Mounting Size L X H (mm.) : 45 X 45
[Application]
It is used to adjust the temperature of the controlled device to the set target temperature

Economy Temperature Controllers

Flexible OutputWide Power SupplyPrecise Temperature Control

- Features both relay contact output and SSR drive output, allowing for easy switching between output types to suit different applications and reducing the need for multiple devices.

- Operates on a wide range of voltage and frequency, within specified ranges.

- High Accuracy: Features a specific internal operation accuracy.

- Mounting Size: With dimensions of 45 x 45 mm, the compact design allows for easy installation in tight spaces.

- Operating Environment: Suitable for use in environments with temperatures ranging from -10‹C to +60‹C and humidity levels of 0-90RH%.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Temperature Controllers Product Overview

The economy series Temperature Controllers is easy to operate and learn at an affordable price. It has better temperature drift and stability than other instruments of the same class, delivering a certain energy-saving effect. It is specially designed for applications with the temperature range of 0.1-999.9 °C, such as light industrial machines and environmental refrigeration/heating equipment. Its selection, configuration and operation are simple. It has powerful performance with complete functions, and can be applied more widely. It is your ideal choice at affordable price.
Product Overview

Temperature Controllers Product Feature

1. The motherboard is equipped with the function of free switching between the SSR voltage drive output and relay contact output. Users do not need to buy 2 products with different outputs at the same time, which greatly reduces the purchase cost and improves the convenience of use.
2. The general 100~240 VAC power supply is provided.
3. We have independently developed an intelligent adjustment algorithm suitable for the functions of the FA industry with the internal operation accuracy of 0.1°C. Thus, the temperature can be controlled precisely without overshooting.
4. Input specifications: K, E, J, N and Pt100 are provided for your free selection.
5. Temperature Controllers Measurement accuracy: 0.3 Grade
6. Output specifications: G: Solid state relay (SSR) Voltage output: 5 VDC/30 mA (for driving the SSR solid state relay).
L: Relay contact switch output (Always ON type): 250 VAC/2A or 30 VDC/2A.
7. Alarm function: Upper limit alarm, lower limit alarm, positive and negative deviation alarm, sensor disconnection alarm, and heater disconnection alarm
8. Operating environment: Temperature -10～+60℃, and humidity 0～90RH%

Disturbance performance comparison

Temperature Controllers Products available on the market
Large temperature change, long temperature constant time

MISUMI Economy Series Temperature Controller
Small temperature change, short temperature constant time

Conventional PID Control

Temperature Controllers Products circulating on the market

MISUMI Economy Series Intelligent PID Control

Temperature Controllers

Temperature Controllers Precautions

· Temperature Controllers When it is necessary to connect an extension cable for the 3-wire RTD sensor, please make sure that the material, diameter and length of the extension cable are consistent with those of the sensor cable, otherwise it will cause temperature deviation.
· Please use M3 terminal to connect AC power supply.
· To avoid interference, please separate the signal line from the power line and high-voltage line during wiring.

Temperature Controllers Usage Method

Temperature Controllers Connection Diagram

C-MTCTRS (Standard Type)
Usage Method

C-MTCTRST (including RS485 communication)
Usage Method

Temperature Controllers Brand introduction

MISUMI, the head office company, has been providing customers with various high-quality parts such as automation parts, mold parts, electronic parts, tool & consumables, etc. quickly and accurately since its establishment in Japan in 1963. By compiling product catalogs independently and establishing a marketing system for direct sales of products, a low-cost business operation mode has been created, and by making annual product plans according to customers' opinions and requirements, MISUMI brand-name products with high quality level have been continuously developed

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-MTCTRS

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship
	₹ 2,988.00	1 Piece(s)	Available	Same day

Dimensional Drawing

Specification Table

Item	C-MTCTRS (Standard Type)	C-MTCTRST (RS485 Communication Type)
Panel Dimension	48×48	48×96
Control Output	Relay contact output (contact capacity AC250 V, 3 A resistance load) or SSR drive output (DC12 V, maximum 20 mA) free switching
Input	Thermocouple (K·J·R·T·N·S·B) Resistance thermometer (Pt100 and JPt100)
Control Method	ON/OFF, P, PI, PD and PID control
Alarm output	Upper limit alarm, lower limit alarm and positive and negative deviation range alarm
Sampling period	100mS
Indication accuracy (thermocouple)	Normal temperature: PV±0.3％ or ±3℃ (select the larger one) ±1-digit; use it at above 200℃; PV±0.5％ or ±2℃ (select the larger one) ±1-digit
Indication accuracy (resistance thermometer)	Normal temperature: PV±0.3％ or ±3℃ (select the larger one) ±1-digit; use it at above 200℃; PV±0.5％ or ±2℃ (select the larger one) ±1-digit
Indication accuracy maintenance temperature range	Standard storage: 23±10℃
Power Voltage	AC100～240VAC~50/60Hz±10%

Basic Information

Input	Thermocouple / Temperature Measuring Resistor	Control Method	ON-OFF Control / PID Control with Self-Tuning / PID Control with Self-Tuning / PI Control / PD Control / P Control / Thermostats	Control Output	Relay Contact Output / SSR Drive Voltage Output
Number of Control Points	1	Number of Input Points(pcs.)	1	Power Supply Voltage	100::240
Failure Detecting Function	Heater Breakage	External Size(mm)	48×48

Please check the type/dimensions/specifications of the part C-MTCTRS in the Temperature Controllers Standard Type series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: There is no indication or output action after the instrument is powered on.: Answer: 1. Please check if there is any fault in the instrument power cable. 2. Check if the power supply and the input power supply have the same polarity.
Question: The PV window shows "HHH" or "LLL" after the instrument is powered on, indicating an abnormality.: Answer: 1. Please check if there is any fault in the instrument power cable. 2. Check if the power supply and the input power supply have the same polarity. 3. Check if the sensor is connected reversely or damaged (open circuit or short circuit).
Question: There is no output after the instrument is powered on, but the indicator light displays normally.: Answer: 1. Please check if there is any fault in the instrument power cable. 2. Check if the output mode and external load are damaged (open circuit or short circuit). 3. Check if the external load of the instrument matches.

Search by Category / Brand

Search by Category

How can we improve?