Why is the order model of the timing belt inconsistent with the actual belt label and engraving?

Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.

The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?

The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to P.2875 【Main causes of premature breakage and corresponding countermeasures】to troubleshoot the equipment in use.

Can alteration be made to the timing belt?

Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.

What kind of belt is better to use under conditions that require high cleanliness?

The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.

What are the two main types of timing belts according to their functions? What is the role?

Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.

How to judge or measure whether the belt tension meets the installation requirements?

It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.

Which tooth type of the timing belt has the smallest clearance? What will it affect?

The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-HTBN255H5M-250

type Belt Width (mm) Core Wire Material Circumference Length Number of Teeth CAD Days to Ship

Specification/Dimensions

type
- C-HTBN□□H5M
Clear
Belt Width (mm)(mm)
9

15

25

30
Clear
Core Wire Material
- Glass Fiber
  - Glass Core Wire
  - Glass Fiber
Clear
Circumference Length(mm)
175

180

185

200

210

215

220

225

230

235

245

250

255

260

265

270

275

280

285

290

295

300

305

310

320

325

330

335

340

345

350

355

360

365

370

375

380

385

390

395

400

405

410

420

425

430

435

440

450

460

465

470

475

480

490

495

500

505

510

515

520

525

530

535

540

545

550

560

565

570

575

580

585

590

595

600

605

610

615

620

625

630

635

640

645

650

655

660

665

670

675

680

685

690

695

700

710

715

720

725

730

735

740

745

750

755

760

765

770

775

780

790

800

805

810

815

820

825

830

835

845

850

860

870

890

900

920

925

930

935

940

950

955

960

965

975

980

985

1000

1015

1020

1025

1035

1050

1075

1080

1100

1110

1125

1135

1140

1145

1150

1160

1175

1180

1190

1195

1200

1210

1225

1235

1250

1270

1295

1310

1340

1350

1380

1390

1400

1420

1455

1490

1500

1520

1530

1540

1575

1595

1635

1690

1700

1720

1760

1800

1870

1875

1895

1900

1945

2000

2050

2100

2250

2350

2460

2500

2525

2650

2670

2730

2760

2800

2850

3060

3070

3255

3360

3470

3660

3770

4260
Clear
Number of Teeth
35

36

37

40

42

43

44

45

46

47

49

50

51

52

53

54

55

56

57

58

59

60

61

62

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

84

85

86

87

88

90

92

93

94

95

96

98

99

100

101

102

103

104

105

106

107

108

109

110

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

158

160

161

162

163

164

165

166

167

169

170

172

174

178

180

184

185

186

187

188

190

191

192

193

195

196

197

200

203

204

205

207

210

215

216

220

222

225

227

228

229

230

232

235

236

238

239

240

242

245

247

250

254

259

262

268

270

276

278

280

284

291

298

300

304

306

308

315

319

327

338

340

344

352

360

374

375

379

380

389

400

410

420

450

470

492

500

505

530

534

546

552

560

570

612

614

651

672

694

732

754

852
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

14 Day(s) or Less
Clear

Specify Alterations

Timing Belts HTD5M (C-HTBN255H5M-250)

Volume Discount

Check FAQ of this product (7 items)

Brand :

MiSUMi Economy

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Economy HTD 5M Timing Belt

Space-SavingArc Tooth ProfileTemperature Range

- Compact Design for Space-Saving Applications. With a smaller tooth pitch and a wide range of compact sizes, our HTD 5M belts are perfect for applications with limited space.

- The unique arc tooth profile delivers higher power transmission compared to traditional trapezoidal profiles, ensuring optimal efficiency and reduced energy loss.

- Engineered to function reliably in specified temperature range.

- The arc tooth profile contributes to minimal vibration and noise generation, creating a smoother and quieter operation.

- Suitable for a broad spectrum of industries and equipment, including automation, packaging, and general machinery, these belts demonstrate their adaptability.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Timing Belt Product Overview

Usually, timing pulleys and Timing Belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and Timing Belts.
Local production in China delivers MISUMI quality at low price.

Timing Belt Product Features

■ HTD type arc tooth profile rubber Timing Belt (H3M/H5M)
Feature 1: The arc tooth profile has higher transmission power in comparison with the trapezoidal tooth.
Feature 2: Economical and maintenance free.
Feature 3: The tooth rubber adopts chloroprene to protect core wire from dirt, grease, and wet environments.
Feature 4:·Have certain conductivity.
Feature 5:·Recommended Operating Temperature Range: -10 to 90℃.

Timing Belt Dimensional Drawing

Dimensional drawing of MISUMI Economy series product belt

Timing Belt Specifications Overview

■Timing Belt Material/Specification Table

Material
① Rear rubber	Chloroprene
② Tooth rubber	Chloroprene
③ Core wire	Glass Fiber
④ Backing cloth	Nylon canvas

Types	Tooth pitch	Lr	H	h	PLD
H5M	5	3.05	3.8	2.06	0.5715

Belt circumference length is core wire length.

Belt Operating Temperature Range: －10 to 90℃.

The model engraved on the back of the product is the manufacturer model.

MISUMI makes no commitment to this product brand.

For the transmission capacity and calculation and design method of economy series Timing Belt, please refer to the national standard (GB) design manual.

Example of Timing Belt Use

Timing Belt Usage Method Example Drawing	Instructions for use of timing wheel and Timing Belt
	①Driving (The driven wheel is driven by the driving wheel for transmission)
	②Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)

Timing Belt Usage Method Example Drawing	Instructions for use of timing wheel and Timing Belt
	③Conveyance (Plates are conveyed by two timing toothed belts)
	④Traction transmission (Workpieces are clamped and transmitted by the belt)

Timing Belt Application Industries

Food	Semiconductor	Smart phone

Automotive	Electronic & Electrical Appliances	Medical

Timing Belt Usage Method

■ Installation method for Timing Belt transmission
①	Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②	Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③	Choose the right belt to replace.
④	To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤	Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥	Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the Timing Belt, especially the Timing Belt transmission device. Asymmetry of the pulley is shown as follows:

⑦	Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧	Install a new belt on the pulley. Never pry or use too much force.
⑨	Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩	Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪	Start the device and observe the belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor. If it feels too hot to the touch, the belt may be too tight, the bearing may be asymmetrical, or the lubrication may be incorrect.

Timing Belt Precautions

①Do not bend the Timing Belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage

Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.

③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Timing Belt Related Products

Timing Belts S3M	Timing Belts S5M	Timing Pulleys S3M

Reference model: C-HTBN141S3M-60	Reference model: C-HTBN350S5M-150	Reference model: C-HTPA18S3M100-A-P5

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-HTBN255H5M-250

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Belt Width (mm) (mm)	Core Wire Material	Circumference Length (mm)	Number of Teeth
	₹ 739.00	2 Piece(s)	Available	14 Day(s)	10	25	[Glass Fiber] Glass Fiber	255	51

Timing Belt Dimensional Drawing

MISUMI Complete specifications Factory direct sales Original quality

Timing Belt Specification Table

■Specification Table
■Type H5M (Tooth Pitch: 5 mm)

Belt Number	Belt Nominal Width	Number of Teeth	Belt Circumference Length (mm)
175H5M	90 (9mm) 150 (15mm) 250 (25mm) 300 (30mm)	35	175
180H5M		36	180
185H5M		37	185
200H5M		40	200
210H5M		42	210
215H5M		43	215
220H5M		44	220
225H5M		45	225
230H5M		46	230
235H5M		47	235
245H5M		49	245
250H5M		50	250
255H5M		51	255
260H5M		52	260
265H5M		53	265
270H5M		54	270
275H5M		55	275
280H5M		56	280
285H5M		57	285
290H5M		58	290
295H5M		59	295
300H5M		60	300
305H5M		61	305
310H5M		62	310
320H5M		64	320
325H5M		65	325
330H5M		66	330
335H5M		67	335
340H5M		68	340
345H5M		69	345
350H5M		70	350
355H5M		71	355
360H5M		72	360
365H5M		73	365
370H5M		74	370
375H5M		75	375
380H5M		76	380
385H5M		77	385
390H5M		78	390
395H5M		79	395
400H5M		80	400
405H5M		81	405
410H5M		82	410
420H5M		84	420
425H5M		85	425
430H5M		86	430
435H5M		87	435
440H5M		88	440
450H5M		90	450
460H5M		92	460
465H5M		93	465
470H5M		94	470
475H5M		95	475
480H5M		96	480
490H5M		98	490
495H5M		99	495
500H5M		100	500
505H5M		101	505
510H5M		102	510
515H5M		103	515
520H5M		104	520
525H5M		105	525
530H5M		106	530
535H5M		107	535
540H5M	108	540
545H5M	109	545
550H5M	110	550
560H5M	112	560
565H5M	113	565
570H5M	114	570
575H5M	115	575
580H5M	116	580
585H5M	117	585
590H5M	118	590
595H5M	119	595
600H5M	120	600
605H5M	121	605
610H5M	122	610
615H5M	123	615
620H5M	124	620
625H5M	125	625
630H5M	126	630
635H5M	127	635
640H5M	128	640
645H5M	129	645
650H5M	130	650
655H5M	131	655
660H5M	132	660
665H5M	133	665
670H5M	134	670
675H5M	135	675
680H5M	136	680
685H5M	137	685
690H5M	138	690
695H5M	139	695
700H5M	140	700
710H5M	142	710
715H5M	143	715
720H5M	144	720
725H5M	145	725
730H5M	146	730
735H5M	147	735
740H5M	148	740
745H5M	149	745
750H5M	150	750
755H5M	151	755
760H5M	152	760

Belt Number	Belt Nominal Width	Number of Teeth	Belt Circumference Length (mm)
765H5M	90 (9mm) 150 (15mm) 250 (25mm) 300 (30mm)	153	765
770H5M		154	770
775H5M		155	775
780H5M		156	780
790H5M		158	790
800H5M		160	800
805H5M		161	805
810H5M		162	810
815H5M		163	815
820H5M		164	820
825H5M		165	825
830H5M		166	830
835H5M		167	835
845H5M		169	845
850H5M		170	850
860H5M		172	860
870H5M		174	870
890H5M		178	890
900H5M		180	900
920H5M		184	920
925H5M		185	925
930H5M		186	930
935H5M		187	935
940H5M		188	940
950H5M		190	950
955H5M		191	955
960H5M		192	960
965H5M		193	965
975H5M		195	975
980H5M		196	980
985H5M		197	985
1000H5M		200	1000
1015H5M		203	1015
1020H5M		204	1020
1025H5M		205	1025
1035H5M		207	1035
1050H5M		210	1050
1075H5M		215	1075
1080H5M		216	1080
1100H5M		220	1100
1110H5M		222	1110
1125H5M		225	1125
1135H5M		227	1135
1140H5M		228	1140
1145H5M		229	1145
1150H5M		230	1150
1160H5M		232	1160
1175H5M		235	1175
1180H5M		236	1180
1190H5M		238	1190
1195H5M		239	1195
1200H5M		240	1200
1210H5M		242	1210
1225H5M		245	1225
1235H5M		247	1235
1250H5M		250	1250
1270H5M		254	1270
1295H5M		259	1295
1310H5M		262	1310
1340H5M		268	1340
1350H5M		270	1350
1380H5M		276	1380
1390H5M		278	1390
1400H5M		280	1400
1420H5M	284	1420
1455H5M	291	1455
1490H5M	298	1490
1500H5M	300	1500
1520H5M	304	1520
1530H5M	306	1530
1540H5M	308	1540
1575H5M	315	1575
1595H5M	319	1595
1635H5M	327	1635
1690H5M	338	1690
1700H5M	340	1700
1720H5M	344	1720
1760H5M	352	1760
1800H5M	360	1800
1870H5M	374	1870
1875H5M	375	1875
1895H5M	379	1895
1900H5M	380	1900
1945H5M	389	1945
2000H5M	400	2000
2050H5M	410	2050
2100H5M	420	2100
2250H5M	450	2250
2350H5M	470	2350
2460H5M	492	2460
2500H5M	500	2500
2525H5M	505	2525
2650H5M	530	2650
2670H5M	534	2670
2730H5M	546	2730
2760H5M	552	2760
2800H5M	560	2800
2850H5M	570	2850
3060H5M	612	3060
3070H5M	614	3070
3255H5M	651	3255
3360H5M	672	3360
3470H5M	694	3470
3660H5M	732	3660
3770H5M	754	3770
4260H5M	852	4260

Basic Information

Belt Type	5M	Belt Shape	Closed End	Belt Material	Rubber Belt
Belt Tooth Surface	Standard (Single Sided)	Belt Shape Type	Circular Tooth Profile HTD Belt	Transmission Torque	High Torque Transmission

Please check the type/dimensions/specifications of the part C-HTBN255H5M-250 in the Timing Belts HTD5M series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?: Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?: Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to P.2875【Main causes of premature breakage and corresponding countermeasures】to troubleshoot the equipment in use.
Question: Can alteration be made to the timing belt?: Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question: What kind of belt is better to use under conditions that require high cleanliness?: Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question: What are the two main types of timing belts according to their functions? What is the role?: Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question: How to judge or measure whether the belt tension meets the installation requirements?: Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?: Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) Hide

Product variants

Part Number
C-HTBN1000H5M-90
C-HTBN1015H5M-150
C-HTBN1015H5M-250
C-HTBN255H5M-300
C-HTBN255H5M-90
C-HTBN260H5M-150

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Belt Width (mm) (mm)	Core Wire Material	Circumference Length (mm)	Number of Teeth
₹ 799.00	2 Piece(s)	Available	14 Day(s)	10	9	[Glass Fiber] Glass Fiber	1000	200
₹ 846.00	2 Piece(s)	Available	14 Day(s)	10	15	[Glass Fiber] Glass Fiber	1015	203
₹ 1,283.00	2 Piece(s)	Available	14 Day(s)	10	25	[Glass Fiber] Glass Fiber	1015	203
₹ 791.00	2 Piece(s)	Available	14 Day(s)	10	30	[Glass Fiber] Glass Fiber	255	51
₹ 575.00	2 Piece(s)	Available	14 Day(s)	10	9	[Glass Fiber] Glass Fiber	255	51
₹ 641.00	2 Piece(s)	Available	14 Day(s)	10	15	[Glass Fiber] Glass Fiber	260	52

Search by Category / Brand

Search by Category

How can we improve?