Why is the order model of the timing belt inconsistent with the actual belt label and engraving?

Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.

The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?

The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.

Can alteration be made to the timing belt?

Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.

What kind of belt is better to use under conditions that require high cleanliness?

The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.

What are the two main types of timing belts according to their functions? What is the role?

Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.

How to judge or measure whether the belt tension meets the installation requirements?

It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.

Which tooth type of the timing belt has the smallest clearance? What will it affect?

The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(224 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-TTBN1075T5-100

Belt Width (mm) Circumference Length Number of Teeth type CAD Days to Ship

Specification/Dimensions

Belt Width (mm)(mm)
10

15

20

25
Clear
Circumference Length(mm)
185

200

205

210

220

225

270

280

295

300

305

330

340

365

375

390

400

410

420

435

450

455

460

480

500

510

525

530

545

550

560

575

605

610

630

650

690

720

725

750

780

800

810

815

840

850

860

900

940

990

1075

1100

1215

1275

1380

1500

1520

1630
Clear
Number of Teeth
37

40

41

42

44

45

54

56

59

60

61

66

68

73

75

78

80

82

84

87

90

91

92

96

100

102

105

106

109

110

112

115

121

122

126

130

138

144

145

150

156

160

162

163

168

170

172

180

188

198

215

220

243

255

276

300

304

326
Clear
type
- C-TTBN□□T5
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

10 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Timing Belts T5

Volume Discount

Check FAQ of this product (7 items)

Brand :

MiSUMi Economy

Part Number :

C-TTBN1075T5-100

C-TTBN1075T5-150

C-TTBN1075T5-200

C-TTBN1075T5-250

C-TTBN1100T5-100

C-TTBN1100T5-150

C-TTBN1100T5-200

C-TTBN1100T5-250

C-TTBN1215T5-100

C-TTBN1215T5-150

C-TTBN1215T5-200

C-TTBN1215T5-250

C-TTBN1275T5-200

C-TTBN1380T5-100

C-TTBN1380T5-150

C-TTBN1380T5-200

C-TTBN1380T5-250

C-TTBN1500T5-100

C-TTBN1500T5-150

C-TTBN1500T5-200

C-TTBN1075T5-100

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Timing Belts T5
It is a trapezoidal tooth profile timing belt. This belt always uses for regular torque transmission in an automation machine
[Features]
• Belt Shape: Closed End
• Belt Tooth Type: T5 (trapezoidal tooth profile)
• Tooth Pitch: 5 mm.
• Belt Width: 10, 15, 20, 25 and 50 mm.
• Circumference Length Shortest/Longest: 185 mm. and 1630 mm.
• Belt Operating Temperature Range: 0 to 80℃.
• Material:
Tooth rubber: Chloroprene
Core wire: Glass Fiber
[Applications]
Suitable for use with a timing pulley in a transmission system in an automation machine

Economy T5 Timing Belt

Quiet OperationWidth OptionsChloroprene Material

- With a wide range of belt widths and lengths, you can select the perfect belt for your specific equipment needs.

- The glass fiber reinforced core provides exceptional strength and tensile strength, preventing belt elongation and slippage, resulting in consistent power transmission.

- The accurately designed trapezoidal tooth profile guarantees smooth and efficient power transmission, minimizing noise and vibration for optimal performance.

- Engineered to function reliably in temperatures ranging from 0°C to 80°C, these belts offer versatility across various operating conditions.

- The smooth tooth profile contributes to minimal noise generation, creating a quieter working environment.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.

Dimensional Drawing

■ Material/Specification Table

	Material
①Body	Chloroprene
②Core Wire	Glass Fiber

Specifications Overview

Types	Tooth pitch	H	h	L	Unit weight g/m (Width: 10mm)
T5	5	2.2	1.2	1.8	20

Operating Temperature 0 to 80℃

Belt circumference length is core wire length

MISUMI makes no commitment to this product brand

The model number on the back of the product is the supplier model.

For the transmission capacity and design method of economy series timing belt, please refer to the national standard (GB) design manual.

Specification Table

■ Specification Table
Ordering Example of MISUMI (Economic Type) Toothed Timing Belt

Types	Tooth pitch	H	h	L	Unit weight g/m (Width: 10mm)
T5	5	2.2	1.2	1.8	20

■ Type T5 (Tooth pitch: 5mm)

Part Number		Belt Nominal Width	Number of Teeth	Belt Circumference Length (mm)
Type	Belt Number	Belt Nominal Width	Number of Teeth	Belt Circumference Length (mm)
C-TTBN	150T5	100 (10mm) 150 (15mm) 200 (20mm) 250 (25mm)	30	150
	160T5		32	160
	165T5		33	165
	185T5		37	185
	190T5		38	190
	200T5		40	200
	205T5		41	205
	210T5		42	210
	215T5		43	215
	220T5		44	220
	225T5		45	225
	240T5		48	240
	245T5		49	245
	250T5		50	250
	255T5		51	255
	260T5		52	260
	270T5		54	270
	275T5		55	275
	280T5		56	280
	290T5		58	290
	295T5		59	295
	300T5		60	300
	305T5		61	305
	310T5		62	310
	320T5		64	320
	325T5		65	325
	330T5		66	330
	335T5		67	335
	340T5		68	340
	350T5		70	350
	355T5		71	355
	360T5		72	360
	365T5		73	365
	370T5		74	370
	375T5		75	375
	390T5		78	390
	395T5		79	395
	400T5		80	400
	410T5		82	410
	420T5		84	420
	425T5		85	425
	435T5		87	435
	440T5		88	440
	445T5		89	445
	450T5		90	450
	455T5		91	455
	460T5		92	460
	470T5		94	470
	475T5		95	475
	480T5		96	480
	490T5		98	490
	500T5		100	500
	510T5		102	510
	525T5		105	525
	530T5		106	530
	545T5		109	545
	550T5		110	550
	560T5		112	560
	565T5		113	565
	575T5		115	575
	590T5		118	590
	600T5		120	600
	605T5		121	605
	610T5		122	610
620T5	124	620
625T5	125	625
630T5	126	630
635T5	127	635
650T5	130	650
660T5	132	660
675T5	135	675
690T5	138	690
700T5	140	700
710T5	142	710
720T5	144	720
725T5	145	725
740T5	148	740
750T5	150	750
780T5	156	780
785T5	157	785
800T5	160	800
810T5	162	810
815T5	163	815
840T5	168	840
850T5	170	850
860T5	172	860
880T5	176	880
900T5	180	900
910T5	182	910
930T5	186	930
940T5	188	940
990T5	198	990
1000T5	200	1000
1020T5	204	1020
1075T5	215	1075
1100T5	220	1100
1140T5	228	1140
1200T5	240	1200
1210T5	242	1210
1215T5	243	1215
1350T5	270	1350
1380T5	276	1380
1500T5	300	1500
1550T5	310	1550
1630T5	326	1630
1800T5	360	1800

Product Feature

		■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Reduce the noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -30 to 90℃.
		■ P type circular tooth profile rubber timing belt (P5M/P8M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -25 to 80℃.
		■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10) Feature 1: Suitable for light load transmission, standard torque driving. Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -30 to 90℃ (MXL/XL/H) , 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example Drawing	Instructions for use of timing wheel and timing belt
	① Driving (The driven wheel is driven by the driving wheel for transmission)
	② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)

Usage Method Example Drawing	Instructions for use of timing wheel and timing belt
	③ Conveyance (Plates are conveyed by two timing toothed belts)
	④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
①	Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②	Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③	Choose the right belt to replace.
④	To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤	Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥	Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device. Asymmetry of the pulley is shown as follows:

⑦	Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧	Install a new belt on the pulley. Never pry or use too much force.
⑨	Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩	Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪	Start the device and observe the belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor. If it feels too hot to the touch, the belt may be too tight, the bearing may be asymmetrical, or the lubrication may be incorrect.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage

Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.

③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food	Semiconductor	Smartphone

Automotive	Electronic & Electrical Appliances	Medical

Related Products

High Torque Timing Pulleys T5 Type	Flat Belts For General Use	(Economy Series) Toothed Timing Belt S2M S3M S5M S8M S14M Type

Reference model: TTPA18T5100-A-NK10	Reference model: HBLT350-4.23	Reference model: C-HTBN400S2M-40
Reason for recommendation: short delivery time, multiple types	Reason for recommendation: intended use for transmission, rich variety of specifications and types	Reason for recommendation: rich variety of specifications, high cost performance

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

1
2
3
4
Next >>

Part Number
C-TTBN1075T5-100
C-TTBN1075T5-150
C-TTBN1075T5-200
C-TTBN1075T5-250
C-TTBN1100T5-100
C-TTBN1100T5-150
C-TTBN1100T5-200
C-TTBN1100T5-250
C-TTBN1215T5-100
C-TTBN1215T5-150
C-TTBN1215T5-200
C-TTBN1215T5-250
C-TTBN1275T5-200
C-TTBN1380T5-100
C-TTBN1380T5-150
C-TTBN1380T5-200
C-TTBN1380T5-250
C-TTBN1500T5-100
C-TTBN1500T5-150
C-TTBN1500T5-200
C-TTBN1500T5-250
C-TTBN1520T5-200
C-TTBN1630T5-150
C-TTBN185T5-100
C-TTBN185T5-150
C-TTBN185T5-200
C-TTBN185T5-250
C-TTBN200T5-100
C-TTBN200T5-150
C-TTBN200T5-200
C-TTBN200T5-250
C-TTBN205T5-100
C-TTBN205T5-150
C-TTBN205T5-200
C-TTBN205T5-250
C-TTBN210T5-100
C-TTBN210T5-150
C-TTBN210T5-200
C-TTBN210T5-250
C-TTBN220T5-100
C-TTBN220T5-150
C-TTBN220T5-200
C-TTBN220T5-250
C-TTBN225T5-100
C-TTBN225T5-150
C-TTBN225T5-200
C-TTBN225T5-250
C-TTBN260T5-100
C-TTBN270T5-100
C-TTBN270T5-150
C-TTBN270T5-200
C-TTBN270T5-250
C-TTBN280T5-100
C-TTBN280T5-150
C-TTBN280T5-200
C-TTBN280T5-250
C-TTBN295T5-100
C-TTBN295T5-150
C-TTBN295T5-200
C-TTBN295T5-250

Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Belt Width (mm) (mm)	Circumference Length (mm)	Number of Teeth
₹ 711.00	1 Piece(s)	Available	13 Day(s)	10	10	1075	215
₹ 780.00	1 Piece(s)	Available	13 Day(s)	10	15	1075	215
₹ 1,004.00	1 Piece(s)	Available	13 Day(s)	10	20	1075	215
₹ 1,185.00	1 Piece(s)	Available	13 Day(s)	10	25	1075	215
₹ 711.00	1 Piece(s)	Available	13 Day(s)	10	10	1100	220
₹ 765.00	1 Piece(s)	Available	13 Day(s)	10	15	1100	220
₹ 829.00	1 Piece(s)	Available	13 Day(s)	10	20	1100	220
₹ 1,148.00	1 Piece(s)	Available	13 Day(s)	10	25	1100	220
₹ 715.00	1 Piece(s)	Available	13 Day(s)	10	10	1215	243
₹ 817.00	1 Piece(s)	Available	13 Day(s)	10	15	1215	243
₹ 1,027.00	1 Piece(s)	Available	13 Day(s)	10	20	1215	243
₹ 1,259.00	1 Piece(s)	Available	13 Day(s)	10	25	1215	243
₹ 1,139.00	1 Piece(s)	Available	10 Day(s)	10	20	1275	255
₹ 749.00	1 Piece(s)	Available	13 Day(s)	10	10	1380	276
₹ 872.00	1 Piece(s)	Available	13 Day(s)	10	15	1380	276
₹ 914.00	1 Piece(s)	Available	13 Day(s)	10	20	1380	276
₹ 1,268.00	1 Piece(s)	Available	13 Day(s)	10	25	1380	276
₹ 763.00	1 Piece(s)	Available	13 Day(s)	10	10	1500	300
₹ 860.00	1 Piece(s)	Available	13 Day(s)	10	15	1500	300
₹ 943.00	1 Piece(s)	Available	13 Day(s)	10	20	1500	300
₹ 1,091.00	1 Piece(s)	Available	13 Day(s)	10	25	1500	300
₹ 1,251.00	1 Piece(s)	Available	13 Day(s)	10	20	1520	304
₹ 1,084.00	1 Piece(s)	Available	10 Day(s)	10	15	1630	326
₹ 624.00	1 Piece(s)	Available	13 Day(s)	10	10	185	37
₹ 626.00	1 Piece(s)	Available	13 Day(s)	10	15	185	37
₹ 627.00	1 Piece(s)	Available	13 Day(s)	10	20	185	37
₹ 663.00	1 Piece(s)	Available	13 Day(s)	10	25	185	37
₹ 625.00	1 Piece(s)	Available	13 Day(s)	10	10	200	40
₹ 626.00	1 Piece(s)	Available	13 Day(s)	10	15	200	40
₹ 627.00	1 Piece(s)	Available	13 Day(s)	10	20	200	40
₹ 664.00	1 Piece(s)	Available	13 Day(s)	10	25	200	40
₹ 625.00	1 Piece(s)	Available	13 Day(s)	10	10	205	41
₹ 627.00	1 Piece(s)	Available	13 Day(s)	10	15	205	41
₹ 627.00	1 Piece(s)	Available	13 Day(s)	10	20	205	41
₹ 664.00	1 Piece(s)	Available	13 Day(s)	10	25	205	41
₹ 625.00	1 Piece(s)	Available	10 Day(s)	10	10	210	42
₹ 627.00	1 Piece(s)	Available	13 Day(s)	10	15	210	42
₹ 627.00	1 Piece(s)	Available	13 Day(s)	10	20	210	42
₹ 664.00	1 Piece(s)	Available	13 Day(s)	10	25	210	42
₹ 625.00	1 Piece(s)	Available	13 Day(s)	10	10	220	44
₹ 627.00	1 Piece(s)	Available	13 Day(s)	10	15	220	44
₹ 663.00	1 Piece(s)	Available	13 Day(s)	10	20	220	44
₹ 664.00	1 Piece(s)	Available	13 Day(s)	10	25	220	44
₹ 625.00	1 Piece(s)	Available	13 Day(s)	10	10	225	45
₹ 627.00	1 Piece(s)	Available	13 Day(s)	10	15	225	45
₹ 663.00	1 Piece(s)	Available	13 Day(s)	10	20	225	45
₹ 664.00	1 Piece(s)	Available	13 Day(s)	10	25	225	45
₹ 625.00	1 Piece(s)		13 Day(s)	10	10	-	-
₹ 625.00	1 Piece(s)	Available	13 Day(s)	10	10	270	54
₹ 629.00	1 Piece(s)	Available	13 Day(s)	10	15	270	54
₹ 664.00	1 Piece(s)	Available	13 Day(s)	10	20	270	54
₹ 667.00	1 Piece(s)	Available	13 Day(s)	10	25	270	54
₹ 626.00	1 Piece(s)	Available	13 Day(s)	10	10	280	56
₹ 629.00	1 Piece(s)	Available	13 Day(s)	10	15	280	56
₹ 664.00	1 Piece(s)	Available	13 Day(s)	10	20	280	56
₹ 668.00	1 Piece(s)	Available	13 Day(s)	10	25	280	56
₹ 626.00	1 Piece(s)	Available	13 Day(s)	10	10	295	59
₹ 664.00	1 Piece(s)	Available	13 Day(s)	10	15	295	59
₹ 666.00	1 Piece(s)	Available	13 Day(s)	10	20	295	59
₹ 668.00	1 Piece(s)	Available	13 Day(s)	10	25	295	59

1
2
3
4
Next >>

Basic Information

Belt Shape	Closed End	Belt Tooth Surface	Standard (Single Sided)	Belt Material	Rubber Belt
Core Wire Material	Glass Fiber	Belt Type	T5	Belt Shape Type	Trapezoidal Tooth Profile Metric Type
Transmission Torque	Regular Torque Transmission

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?: Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?: Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.
Question: Can alteration be made to the timing belt?: Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question: What kind of belt is better to use under conditions that require high cleanliness?: Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question: What are the two main types of timing belts according to their functions? What is the role?: Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question: How to judge or measure whether the belt tension meets the installation requirements?: Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?: Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) Hide

Search by Category / Brand

Search by Category

How can we improve?