Why is the order model of the timing belt inconsistent with the actual belt label and engraving?

Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.

The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?

The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to P.2875 【Main causes of premature breakage and corresponding countermeasures】to troubleshoot the equipment in use.

Can alteration be made to the timing belt?

Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.

What kind of belt is better to use under conditions that require high cleanliness?

The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.

What are the two main types of timing belts according to their functions? What is the role?

Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.

How to judge or measure whether the belt tension meets the installation requirements?

It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.

Which tooth type of the timing belt has the smallest clearance? What will it affect?

The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-TBN548L075

type Belt Width (mm) Belt Norminal Width (Inch) Circumference Length Number of Teeth CAD Days to Ship

Specification/Dimensions

type
- C-TBN□□□L
Clear
Belt Width (mm)(mm)
12.7

19.1

25.4

38.1
Clear
Belt Norminal Width (Inch)(Inch)
0.5

0.75

1

1.5
Clear
Circumference Length(mm)
247.65

276.23

285.75

304.8

314.33

333.38

342.9

361.95

381

390.53

400.05

409.58

419.1

428.63

438.15

447.68

457.2

466.73

476.25

485.78

495.30

504.83

514.35

523.88

533.4

542.93

552.45

561.98

571.5

581.03

590.55

600.08

609.6

619.13

628.65

638.18

647.7

657.23

666.75

676.28

685.8

695.33

704.85

714.38

723.9

733.43

742.95

752.48

762

771.53

781.05

790.58

800.1

819.15

828.68

838.2

847.73

857.25

866.78

876.3

895.35

904.88

914.4

933.45

942.98

952.5

962.03

971.55

990.6

1000.13

1009.65

1019.18

1028.7

1038.23

1047.75

1066.8

1085.85

1095.38

1104.9

1114.43

1123.95

1133.48

1143

1152.53

1162.05

1171.58

1181.1

1200.15

1219.2

1247.78

1257.30

1266.83

1295.4

1314.45

1333.5

1343.03

1371.6

1390.65

1400.18

1409.7

1419.23

1438.28

1447.8

1457.33

1476.38

1485.9

1524

1562.1

1571.63

1600.2

1609.73

1657.35

1676.4

1762.13

1771.65

1781.18

1828.8

1847.85

1857.38

1905

1943.1

1952.63

2047.88

2076.45

2190.75

2286

2324.1

2524.13

2647.95

2914.65

4257.68
Clear
Number of Teeth
26

29

30

32

33

35

36

38

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

86

87

88

89

90

91

92

94

95

96

98

99

100

101

102

104

105

106

107

108

109

110

112

114

115

116

117

118

119

120

121

122

123

124

126

128

131

132

133

136

138

140

141

144

146

147

148

149

151

152

153

155

156

160

164

165

168

169

174

176

185

186

187

192

194

195

200

204

205

215

218

230

240

244

265

278

306

447
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

10 Day(s) or Less

12 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Timing Belts L (C-TBN548L075)

Volume Discount

Check FAQ of this product (7 items)

Brand :

MiSUMi Economy

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Timing Belts L.
It is a trapezoidal tooth profile timing belt. This belt always uses for regular torque transmission in an automation machine
[Features]
• Belt Shape: Closed End
• Belt Tooth Type: L (trapezoidal tooth profile)
• Tooth Pitch: 9.525 mm.
• Belt Width: 12.7, 19.1, 25.4, and 38.1 mm.
• Circumference Length Shortest/Longest: 247.65 mm. and 4257.68 mm.
• Belt Operating Temperature Range: －30 to 90℃.
• Material:
Tooth rubber: Chloroprene
Core wire: Glass Fiber
Tooth surface protection layer: Nylon canvas
[Applications]
Suitable for use with a timing pulley in a transmission system in an automation machine

Economy L-Type Timing Belt

Material: ChloropreneGlass fiber (core)Nylon canvas (tooth surface protection layer)

- Chloroprene Material: Offers excellent resistance to abrasion, oil, and grease, ensuring long-lasting performance.

- Length and Width: Select from a wide range of belt lengths and widths.

- Precise Trapezoidal Tooth Profile: Ensures smooth and efficient power transmission with minimal noise and vibration.

- Glass Fiber Reinforced Core: Provides exceptional strength and tensile strength, preventing belt elongation and slippage.

- Wide Operating Temperature Range: Functions reliably in temperatures from -30°C to 90°C, expanding application possibilities.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
Local production in China delivers MISUMI quality at low price.

Dimensional Drawing

MISUMI Complete specifications Factory direct sales Original quality

■ Material/Specification Table

Material
① Tooth surface protection layer	Nylon canvas
② Tooth rubber	Chloroprene
③ Core wire	Glass Fiber

Specifications Overview

Types	Tooth pitch	2θ	Lr	h	H	Rr	Ra	Unit weight g/m (Width: 10mm)
L	9.525	40°	4.65	1.91	3.61	0.51	0.51	32.0 (30.0)

Please note that the meaning of the belt number of toothed timing belt varies with type.
The belt circumference length of L (inch size) is the belt number.

Belt circumference length is core wire length.

C-TBN belt operating temperature range: -30 to 90 ℃.

The model engraved on the back of the product is the manufacturer model.

MISUMI makes no commitment to this product brand.

For the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.

Specification Table

■ Specification Table
Please order after selecting part number and parameters according to the selection steps

		Part Number (TypeBelt Number Nominal Belt Width)
		C-TBN330L050

■ C-TBN
Tooth profile L (Pitch: 12.7mm)

Part Number		Belt Nominal Width	Number of Teeth	Belt Circumference Length (mm)
Type	Belt Number	Belt Nominal Width	Number of Teeth	Belt Circumference Length (mm)
C-TBN	86L	050 (12.7mm) 075 (19.1mm) 100 (25.4mm) 150 (38.1mm)	23	219.08
	98L		26	247.65
	109L		29	276.23
	113L		30	285.75
	120L		32	304.80
	124L		33	314.33
	131L		35	333.38
	135L		36	342.90
	143L		38	361.95
	150L		40	381.00
	154L		41	390.53
	158L		42	400.05
	161L		43	409.58
	165L		44	419.10
	169L		45	428.63
	173L		46	438.15
	176L		47	447.68
	180L		48	457.20
	185L		49	466.73
	187L		50	476.25
	191L		51	485.78
	195L		52	495.30
	200L		53	504.83
	202L		54	514.35
	206L		55	523.88
	210L		56	533.40
	214L		57	542.93
	217L		58	552.45
	220L		59	561.98
	225L		60	571.50
	230L		61	581.03
	232L		62	590.55
	236L		63	600.08
	240L		64	609.60
	244L		65	619.13
	248L		66	628.65
	251L		67	638.18
	255L		68	647.70
	260L		69	657.23
	263L		70	666.75
	265L		71	676.28
	270L		72	685.80
	275L		73	695.33
	277L		74	704.85
	281L		75	714.38
	285L		76	723.90
	289L		77	733.43
	292L		78	742.95
	297L		79	752.48
	300L		80	762.00
	303L		81	771.53
	307L		82	781.05
	310L		83	790.58
	315L		84	800.10
	322L		86	819.15
	326L		87	828.68
	330L		88	838.20
	334L		89	847.73
	337L		90	857.25
	341L		91	866.78
	345L		92	876.30
	352L		94	895.35
	355L		95	904.88
	360L		96	914.40
367L	98	933.45
371L	99	942.98
375L	100	952.50
382L	102	971.55
390L	104	990.60
394L	105	1000.13
397L	106	1009.65
401L	107	1019.18
405L	108	1028.70
408L	109	1038.23
412L	110	1047.75
420L	112	1066.80
427L	114	1085.85
431L	115	1095.38
435L	116	1104.90
439L	117	1114.43
442L	118	1123.95
446L	119	1133.48
450L	120	1143.00
453L	121	1152.53
457L	122	1162.05
461L	123	1171.58
465L	124	1181.10
472L	126	1200.15
480L	128	1219.20
492L	131	1247.78
495L	132	1257.30
500L	133	1266.83
510L	136	1295.40
514L	137	1304.93
517L	138	1314.45
525L	140	1333.50
540L	144	1371.60
547L	146	1390.65
548L	146	1390.65
550L	147	1400.18
555L	148	1409.70
558L	149	1419.23
566L	151	1438.28
570L	152	1447.80
574L	153	1457.33
581L	155	1476.38
585L	156	1485.90
600L	160	1524.00
619L	165	1571.63
630L	168	1600.20
634L	169	1609.73
653L	174	1657.35
660L	176	1676.40
675L	180	1714.50
694L	185	1762.13
697L	186	1771.65
700L	187	1781.18
720L	192	1828.80
728L	194	1847.85
731L	195	1857.38
739L	197	1876.43
750L	200	1905.00
765L	204	1943.10
769L	205	1952.63
787L	210	2000.25
806L	215	2047.88
817L	218	2076.45
863L	230	2190.75
900L	240	2286.00
915L	244	2324.10
983L	262	2495.55
994L	265	2524.13
1043L	278	2647.95
1148L	306	2914.65
1200L	320	3048.00
1676L	447	4257.68

Product Features

	■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Reduce the noise generated by high-speed operation. Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: timing belt Operating Temperature Range: -30 to 90℃.
	■ P type circular tooth profile rubber timing belt (P5M/P8M) Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission. Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation. Feature 3: timing belt Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth. Feature 4: Have certain conductivity Feature 5: Operating Temperature Range: -25 to 80℃.
	■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10) Feature 1: Suitable for light load transmission, standard torque driving. Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method. Feature 4: Have certain conductivity Feature 5: timing belt Operating Temperature Range: -30 to 90℃ (MXL/XL/L/H), 0 to 80℃ (T5/T10)

Usage Method

■ Installation method for timing belt transmission
①	Turn off the power supply, remove the protective cover, loosen the motor assembly timing belt, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②	Remove the old timing belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③	Choose the right timing belt to replace.
④	To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The timing belt must be kept dry before installation and use.
⑤	Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥	Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device. Asymmetry of the pulley is shown as follows:

⑦	Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧	Install a new timing belt on the pulley. Never pry or use too much force.
⑨	Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩	Tighten the assembly timing belt of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪	Start the device and observe the timing belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage

② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.

Do not directly contact water in operating environment

③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Example of Use

Usage Method Example Drawing	Instructions for use of timing wheel and timing belt
	① Driving (The driven wheel is driven by the driving wheel for transmission)
	② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)

Usage Method Example Drawing	Instructions for use of timing wheel and timing belt
	③Conveyance (Plates are conveyed by two timing toothed belts)
	④Traction transmission (Workpieces are clamped and transmitted by the timing belt)

Application Industries

Food	Semiconductor	Smart phone

Automotive	Electronic & Electrical Appliances	Medical

Related Products

High Torque Timing Pulleys S2M Type	Flat Timing Belt For General Use	Economy Series Toothed Timing Belt S2M S3M S5M S8M S14M Type

Reference timing belt model: HTPA48S2M040-B-N10	Reference timing belt model: HBLT350-4.23	Reference timing belt model: C-HTBN400S2M-40
Reason for recommendation: high transmission power, short delivery time, multiple types	Reason for recommendation: intended use for transmission, rich variety of specifications and types	Reason for recommendation: rich variety of specifications, high cost performance

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-TBN548L075

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Belt Width (mm) (mm)	Belt Norminal Width (Inch) (Inch)	Circumference Length (mm)	Number of Teeth
	₹ 993.00	1 Piece(s)	Available	13 Day(s)	10	19.1	0.75	1390.65	146

Basic Information

Belt Type	L	Belt Shape	Closed End	Belt Material	Rubber Belt
Belt Tooth Surface	Standard (Single Sided)	Core Wire Material	Glass Fiber	Belt Shape Type	Trapezoidal Tooth Profile Circular Type
Transmission Torque	Regular Torque Transmission

Please check the type/dimensions/specifications of the part C-TBN548L075 in the Timing Belts L series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?: Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?: Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to P.2875【Main causes of premature breakage and corresponding countermeasures】to troubleshoot the equipment in use.
Question: Can alteration be made to the timing belt?: Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question: What kind of belt is better to use under conditions that require high cleanliness?: Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question: What are the two main types of timing belts according to their functions? What is the role?: Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question: How to judge or measure whether the belt tension meets the installation requirements?: Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?: Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) Hide

Product variants

Part Number
C-TBN1043L150
C-TBN109L050
C-TBN109L075
C-TBN548L100
C-TBN548L150
C-TBN550L050

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Belt Width (mm) (mm)	Belt Norminal Width (Inch) (Inch)	Circumference Length (mm)	Number of Teeth
₹ 2,599.00	1 Piece(s)	Available	13 Day(s)	10	38.1	1.5	2647.95	278
₹ 280.00	1 Piece(s)	Available	13 Day(s)	10	12.7	0.5	276.23	29
₹ 350.00	1 Piece(s)	Available	13 Day(s)	10	19.1	0.75	276.23	29
₹ 1,289.00	1 Piece(s)	Available	13 Day(s)	10	25.4	1	1390.65	146
₹ 1,887.00	1 Piece(s)	Available	13 Day(s)	10	38.1	1.5	1390.65	146
₹ 536.00	1 Piece(s)	Available	13 Day(s)	10	12.7	0.5	1400.18	147

Search by Category / Brand

Search by Category

How can we improve?