Does the lock nut need to be greased?

Lubricant is required for both tightening and loosening. If the hardness of the fixed shaft is relatively low, please use a grease with high lubricity.

Precautions when fixing

In order to ensure the maximum effect of the lock nut, please expose at least 2 inches of the threaded part when fixing. Standard type lock nut is a round nut, with four small slots around its outer perimeter, which can be tightened on the stud body using a crescent wrench. The lock nut should be equipped with a shaft washer, which allows the small slot on the stud body to be fixed relative to its peripheral small slot, preventing its loosening.

Differences between a standard nut and a lock nut (1)

1. Vibration resistance is not the same. Standard nut is inferior to lock nut; Lock nut: superior anti-vibration performance. When the thread is tightened, the top of thread of the bolt closely enters the 30° wedge-shaped slope of the nut to be clamped, and the normal force exerted on the wedge-shaped slope forms an angle of 60° with the axis of the bolt instead of The included angle of 30°. Therefore, the normal force generated when the locknut is tightened is much greater than that of the standard nut, and it has a great anti-loosening and anti-vibration ability.

Differences between a standard nut and a lock nut (2)

2. Wear resistance and shear resistance are not the same. Standard nut: poor abrasion resistance and shear resistance; Lock nut: excellent wear resistance and shear resistance. The 30° inclined surface of thread bottom of the nut can make the nut locking force evenly distributed on all the threads of each ridge. Since the compression force on the thread surface of each ridge is evenly distributed, the nut can better solve the thread wear and shear deformation problem.

Differences between a standard nut and a lock nut (3)

3. The reutilization rate is not the same. Standard nut: low reutilization rate; Lock nut: high reutilization rate. Extensive use shows that after repeated tightening and disassembly of the anti-loosening nut, its locking force is still not reduced, and the original locking can be maintained.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-ANAW06

type Nominal of Thread M Type CAD Days to Ship

Specification/Dimensions

type
- C-AN
- C-ANAW
Clear
Nominal of Thread M
10X0.75

12X1.0

15X1.0

17X1.0

20X1.0

25X1.5

30X1.5

35X1.5

40X1.5

45X1.5

50X1.5
Clear
Type
- Lock Nut
- Lock Nut with Tooth Lock Washer
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

8 Day(s) or Less
Clear

Specify Alterations

Bearing Lock Nuts AN Type (Part Number)

Volume Discount

Check FAQ of this product (5 items)

Brand :

MiSUMi Economy

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Economy Bearing Lock Nuts AN Type

Anti-Loosening Durable Reliable

- The Economy Series Bearing Lock Nuts offer unbeatable affordability while maintaining high standards of performance.

- Available in a wide range of thread sizes, providing versatility for various applications.

- Constructed from strong materials for reliable performance in demanding environments.

- Equipped with an anti-loosening washer for enhanced resistance to vibrations.

- Benefit from extensive inventory and fast shipping for quick delivery.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview of Fulcrum Pins

Fulcrum Pins, Lock nut is widely used in machinery and other industries. Its working principle is self-locking by the friction between the nut and the bolt. But the reliability of this self-locking is reduced in dynamic loads. In some important occasions, we will take some anti-loosening measures to ensure the reliability of nut locking. The working principle of the nut is self-locking by the friction between the nut and the bolt. But the reliability of this self-locking is reduced in dynamic loads.

Product Feature of Fulcrum Pins

Structure and features
Features of Fulcrum Pins
In some important occasions, we will take some anti-loosening measures to ensure the reliability of nut locking. Fulcrum Pins, Lock Nut is one of the anti-loosening measures.
The anti-loosening effect of the lock nut mainly depends on the interaction force between the meshing threads of the nut and the bolt. There are many ways to improve the interaction force between the meshing threads such as the structural improvement of the nut thread, Nylon roughening of Nylon nut, and thread surface treatment.
Economic type Lock nut Tooth lock washer AN series Product Feature

Economic type Lock nut Tooth lock washer AN series Product Feature

The structure of Fulcrum Pins is simple, and the female thread and the end face are processed at the same time, ensuring the yaw precision requirement

Dimensional Drawing of Fulcrum Pins

Economic type Lock nut Tooth lock washer AN series Dimensional Drawing

Specifications Overview of Fulcrum Pins

Economic type Lock nut Tooth lock washer AN series Specifications Overview

Example Use of Fulcrum Pins

Economic type Lock nut Tooth lock washer AN series Example of use

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
C-ANAW06

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Nominal of Thread M	Type
	₹ 801.00	2 Piece(s)	Available	8 Day(s)	10	30X1.5	Lock Nut with Tooth Lock Washer

Basic Information

Shape	Round Shape	Material	S45C Thermal Refined	Surface Treatment	No
Screw Type	Metric (Fine) Thread

Please check the type/dimensions/specifications of the part C-ANAW06 in the Bearing Lock Nuts AN Type series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Does the lock nut need to be greased?: Answer: Lubricant is required for both tightening and loosening. If the hardness of the fixed shaft is relatively low, please use a grease with high lubricity.
Question: Precautions when fixing: Answer: In order to ensure the maximum effect of the lock nut, please expose at least 2 inches of the threaded part when fixing. Standard type lock nut is a round nut, with four small slots around its outer perimeter, which can be tightened on the stud body using a crescent wrench. The lock nut should be equipped with a shaft washer, which allows the small slot on the stud body to be fixed relative to its peripheral small slot, preventing its loosening.
Question: Differences between a standard nut and a lock nut (1): Answer: 1. Vibration resistance is not the same. Standard nut is inferior to lock nut; Lock nut: superior anti-vibration performance. When the thread is tightened, the top of thread of the bolt closely enters the 30° wedge-shaped slope of the nut to be clamped, and the normal force exerted on the wedge-shaped slope forms an angle of 60° with the axis of the bolt instead of The included angle of 30°. Therefore, the normal force generated when the locknut is tightened is much greater than that of the standard nut, and it has a great anti-loosening and anti-vibration ability.
Question: Differences between a standard nut and a lock nut (2): Answer: 2. Wear resistance and shear resistance are not the same. Standard nut: poor abrasion resistance and shear resistance; Lock nut: excellent wear resistance and shear resistance. The 30° inclined surface of thread bottom of the nut can make the nut locking force evenly distributed on all the threads of each ridge. Since the compression force on the thread surface of each ridge is evenly distributed, the nut can better solve the thread wear and shear deformation problem.
Question: Differences between a standard nut and a lock nut (3): Answer: 3. The reutilization rate is not the same. Standard nut: low reutilization rate; Lock nut: high reutilization rate. Extensive use shows that after repeated tightening and disassembly of the anti-loosening nut, its locking force is still not reduced, and the original locking can be maintained.

Check other FAQ (2 items) Hide

Product variants

Part Number
C-AN03
C-AN04
C-AN05
C-ANAW07
C-ANAW08
C-ANAW09

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Nominal of Thread M	Type
₹ 248.00	1 Piece(s)	Available	Same day Stock	10	17X1.0	Lock Nut
₹ 248.00	1 Piece(s)	Available	Same day Stock	10	20X1.0	Lock Nut
₹ 248.00	1 Piece(s)	Available	Same day Stock	10	25X1.5	Lock Nut
₹ 867.00	2 Piece(s)	Available	8 Day(s)	10	35X1.5	Lock Nut with Tooth Lock Washer
₹ 898.00	2 Piece(s)	Available	Same day Stock	10	40X1.5	Lock Nut with Tooth Lock Washer
₹ 944.00	2 Piece(s)	Available	8 Day(s)	10	45X1.5	Lock Nut with Tooth Lock Washer

Search by Category / Brand

Search by Category

How can we improve?