Roller Followers Product Overview
Roller Followers Cam bearing is a kind of bearing with shaft, which has its needle roller mounted into the thick-wall outer ring and inner ring, most suitable for the transmission guide rail.
Cam follower is a high-performance bearing with shaft, which has a needle-shaped roller called needle roller mounted inside. The needle roller has the function of improving the rotating capacity and can withstand high-speed rotation. In addition, the outer ring is designed with a thicker wall than ordinary bearings, and can also be used in places subject to impact loads or heavy loads.
Roller Followers Product Feature
1. Roller Followers Equipped with a shaft for easy installation!
2. Ideal for places subject to loads!
3. Also suitable for high speed rotation!
Standard Cam Follower StructureRoller Guide ModeThe cam follower with cage is suitable for applications with low friction coefficient and high rotation speed, and the full complement roller cam follower is suitable for applications with high rotation speed and heavy load.
Roller Followers Structure of Sealing PartFor the non-sealed type bearing, the gap between the outer ring and the end rod peripheral ring and between the outer ring and the side plate is small, thus forming a labyrinth. For the sealed type bearing, a sealing gasket is mounted in the shielded type labyrinth, thus preventing intrusion of foreign matter.
Roller Followers Outer Ring O.D. ShapeThe bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.
Slide Rail Load Capacity ComparisonRoller Followers Dimensional Drawing
Roller Followers Specifications Overview
Product Accuracy (μm)Allowable ToleranceAllowable Tolerance of Outer Ring and Allowable Value Roller Followers Example of Use
Roller Followers Moving Direction Linear Motion The surface on the matching side must be flat and the Roller Followers moves in a straight line | | Swing Direction The surface on the matching side is curved, and the cam follower moves in a curve | |
Roller Followers Attaching MethodDo not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Use a hex socket wrench or a slotted screwdriver.
Secure the hexagon socket or screwdriver slot for fixing, and then turn the nut with a wrench to tighten.
Bolt Tightening TorqueDo not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Roller Followers Precautions
· If the cam follower falls to the ground or is struck hard, it may be damaged.
· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Some cam followers are not filled with grease due to different sizes.
Please refer to the table below and add proper amount of grease to the products that are not filled with grease before use.
Cam Follower Grease Performance and Service Temperature
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy