I bought MISUMI chains, but why can't I use them on my original sprocket?

Please confirm the specifications of the original sprocket and chain. Specification series number may not match. In addition, there are two specifications: A series and B series in China. The two specifications of sprocket chain are not universal.

Does the chain need routine maintenance after installation and use?

The chain needs regular maintenance after installation and use. These include daily lubricant application, confirmation of chain slack. The quality of lubrication will affect the life of the chain. Especially in recent years, high-speed use has been increasing, so it is necessary to take efficient lubrication methods.

Does the chain purchased come with joints, and if any, how many joints?

In principle, one chain comes with one joint. If the customer needs multiple joints to use, you can buy it yourself, we have separate joints to choose from. Please refer to the chain type when purchasing joints.

How to use the carrier chain?

The carrier chain can only be used for transmission, not for scenarios with large load and high positioning accuracy, please be careful!

Can the chain be cut off when it is extended?

It can be cut off. Our company has simple chain cutter available for selection.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

E-JNT-T60

Max. Allowable Tension Type Number of Links type Type Nominal Number Pitch CAD Days to Ship

Specification/Dimensions

Max. Allowable Tension(kN)
- ~99
Clear
Type
- Bilateral
- Unilateral
Clear
Number of Links(pc(s).)
80

96

120
Clear
type
- C-CHEL40
- C-CHEL50
- C-CHEL60
- C-CHET40
- C-CHET50
- C-CHET60
Clear
Type
- Standard Chains
- Joint Links, Offset Links
Clear
Nominal Number
40

50

60
Clear
Pitch
12.7

15.875

19.05

25.4
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

10 Day(s) or Less

18 Day(s) or Less
Clear

Specify Alterations

Chains With Attachments, Japanese Standard Type/Joint Link (E-JNT-T60)

Volume Discount

Check FAQ of this product (5 items)

Brand :

MiSUMi Economy

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

- Chains With Attachments, Japanese Standard Type/Joint Link from MISUMI.
- This chain type is economy series of standard chains.
- 2 chain types are available, C-CHEL (single side type), C-CHET (double side type).
- Chain nominal No. are 40, 50 or 60.
- Max. Allowable Tension of chain are 2.75 kN (No. 40), 4.41 kN (No. 50) and 6.28 kN (No. 60).
- Chains are made of steel.
- The conveyor belt chain with accessories can only be used for transmission, with an additional height difference of ±0.25mm. Do not use for precise positioning and heavy load use.

Economy Chains With Attachments

High Tension Reliable Customizable

- Experience robust performance with our Economy Series chains, featuring maximum allowable tensions for demanding applications.

- Choose from single side and double side types to perfectly match your transmission and conveyor needs.

- Built from high-strength steel for long-lasting reliability.

- Configurations available for nominal sizes to suit specific requirements.

- Ideal for conveyor belts and general power transmission, accommodating height differences.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview of Chains

■The Chains is a flexible component composed of inner Chains plates, sleeves, rollers, pins, outer Chains plates and other matched combination parts. All Chains used on machinery, mechanisms and machines are referred to as industrial Chains. The roller part of the Chains meshes with the tooth part of the sprocket and transmits power as tension.

■Only sprockets and Chains with the same specifications can be used in combination. Matching of different types may cause the Chains sprocket mechanism to fail to function properly!

■ The conveyor belt chain with accessories can only be used for transmission, with an additional height difference of ±0.25mm. Do not use for precise positioning and heavy load use.

■ Product Composition of Chains
Idler Dimensional Drawing

Dimensional Drawing of Chains

Material Steel

■ The conveyor belt Chains with accessories can only be used for transmission, with an additional height difference of ±0.25mm. Do not use for precise positioning and heavy load use.

Specifications Overview of Chains

■ Sprocket, Chains selection This series is ISO Standard 08A/10A/12A/(ANSI 40/50/60) roller chain, and can be used in combination with our 40B/50B/60B series sprocket.
■Do not use it with 08B/10B/12B sprocket, which may cause the Chains sprocket mechanism to fail to function properly!
■ The conveyor belt Chains with accessories can only be used for transmission, with an additional height difference of ±0.25mm. Do not use for precise positioning and heavy load use.

Part Number of Chains		＊Number of links	Link spacing	Pin		Slab	Accessories					Allowable maximum tension kN (kgf)
Type of Chains	Nominal model	＊Number of links	Link spacing	L₁	L₂	t	C	X	Y	N	d	Allowable maximum tension kN (kgf)
C-CHEL (single side type) C-CHET (double side type)	40	120	12.7	8.3	9.6	1.5	7.9	12.7	17.6	9.5	3.4	2.75 (280)
	50	96	15.875	10.25	11.85	2	10.3	15.9	23.1	12.7	5.5	4.41 (450)
	60	80	19.05	12.65	14.35	2.4	11.9	19.05	27.8	15.9	5.5	6.28 (640)

■ Number of links of 1 Chains

Part Number		Number of links of 1 chain
Type of Chains	No.	Number of links of 1 chain
C-CHEL (single side type) C-CHET (double side type)	40	120 (circumference length 1,524mm)
	50	96 (circumference length 1,524mm)
	60	80 (circumference length 1520mm)

Product Feature of Chains

■Sprocket Chains drive has the following features compared with gear drive and belt drive:
1. Multi-tooth load bearing, safe and reliable;
2. Flexible transmission, absorbing shock and vibration;
3. Large center distance range, low manufacturing and mounting accuracy requirements;
4. Compared with belt drive, the transmission ratio is accurate and the transmission efficiency is higher, suitable for high temperature.

■Two main purposes of the Chains:
1. Connect the motor for transmission 2. Place the workpiece directly or indirectly on the Chains for transfer

Example Use of Chains

Used for driving power of Chains
A mechanism that can convert motor power into roller rotation by combining multiple sprockets and Chains

Used for transporting workpieces of Chains
A chain conveyor frame with high versatility using flat profiles and Chains guides

Used for transporting workpieces of Chains
A mechanism used to mount accessories on the Chains, and extract and transport workpieces

Precautions of Chains

This series is ISO Standard 08A/10A/12A/(ANSI 40/50/60) roller Chains, and can be used in combination with our 40B/50B/60B series sprocket. Do not use it with 08B/10B/12B sprocket, which may cause the Chains sprocket mechanism to fail to function properly!

If you need to cut the Chains by yourself, please confirm whether the chain link to be cut is an inner link or an outer link. If it is a single section after being cut off, it may need to be used with an offset link head.

Usage Method of Chains

How to mount the roller Chains

(A) Axis configuration of Chains
■Horizontal
Even when the two axes are arranged horizontally, the rotation direction of the axis must be considered.
The examples (2) and (3) in the figure show that when the Chains is stretched, the disengagement between the sprocket teeth and the chain is not smooth and may bite.
In particular, the upper and lower chains in (3) will contact each other, so an idler is required.

■Vertical
If the Chains is stretched, slack as shown in (5) will occur, and
when a small sprocket is used on the lower side, the chain may fall off. Therefore, please use it at an angle of 60 or less as shown in (4).
When it is necessary to use it vertically due to the mechanism or space, it is recommended to put the large sprocket on the lower side, and
use the idler on the outside or inside as shown in (6).

(B) Deflection
Deflection is generally about 4% of the shaft spacing, and about 2% in the following cases.
a. Vertical transmission or close to vertical transmission
b. Shaft spacing is more than 1m
c. When frequent heavy load starting and stopping are required
d. When reverse rotation is required

(C)When the load changes
If a tension adjuster is mounted on the tension side or slack side of the Chains to provide initial tension in advance, it will eliminate vibration and reduce noise during operation.

Related Products of Chains


Sprocket 40B	Sprocket 50B	Sprocket 60B

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
E-JNT-T60

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Type	Nominal Number	Pitch	Max. Allowable Tension (kN)	Type	Number of Links (pc(s).)
	₹ 4,311.00	10 Piece(s)	Available	18 Day(s)	10	Joint Links, Offset Links	60	19.05	-	-	-

Basic Information

Number of Strands	1	Material	Steel	Surface Treatment	Not Provided

Please check the type/dimensions/specifications of the part E-JNT-T60 in the Chains With Attachments, Japanese Standard Type/Joint Link series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: I bought MISUMI chains, but why can't I use them on my original sprocket?: Answer: Please confirm the specifications of the original sprocket and chain. Specification series number may not match. In addition, there are two specifications: A series and B series in China. The two specifications of sprocket chain are not universal.
Question: Does the chain need routine maintenance after installation and use?: Answer: The chain needs regular maintenance after installation and use. These include daily lubricant application, confirmation of chain slack. The quality of lubrication will affect the life of the chain. Especially in recent years, high-speed use has been increasing, so it is necessary to take efficient lubrication methods.
Question: Does the chain purchased come with joints, and if any, how many joints?: Answer: In principle, one chain comes with one joint. If the customer needs multiple joints to use, you can buy it yourself, we have separate joints to choose from. Please refer to the chain type when purchasing joints.
Question: How to use the carrier chain?: Answer: The carrier chain can only be used for transmission, not for scenarios with large load and high positioning accuracy, please be careful!
Question: Can the chain be cut off when it is extended?: Answer: It can be cut off. Our company has simple chain cutter available for selection.

Check other FAQ (2 items) Hide

Product variants

Part Number
C-CHEL40-120
C-CHEL50-96
C-CHEL60-80
C-CHET40-120
C-CHET50-96
C-CHET60-80

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Type	Nominal Number	Pitch	Max. Allowable Tension (kN)	Type	Number of Links (pc(s).)
₹ 1,585.00	1 Piece(s)	Available	Same day Stock	10	Standard Chains	40	12.7	~99	Unilateral	120
₹ 2,146.00	2 Piece(s)	Available	10 Day(s)	10	Standard Chains	50	15.875	~99	Unilateral	96
₹ 2,644.00	2 Piece(s)	Available	18 Day(s)	10	Standard Chains	60	19.05	~99	Unilateral	80
₹ 2,434.00	1 Piece(s)	Available	Same day Stock	10	Standard Chains	40	25.4	~99	Bilateral	120
₹ 2,156.00	1 Piece(s)	Available	Same day Stock	10	Standard Chains	50	15.875	~99	Bilateral	96
₹ 4,475.00	2 Piece(s)	Available	10 Day(s)	10	Standard Chains	60	19.05	~99	Bilateral	80

Search by Category / Brand

Search by Category

How can we improve?