What are the differences between economy series products and standard products? Is performance degraded?

Compared with standard products, economy series products are more compact. Unnecessary tolerances are reduced, but there is no influence on use at all.

Why are the economy series products so cheap?

The aluminum drawing profile is adopted, which can minimize the cutting amount and the cost on the premise of satisfying the normal use of customers.

Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(6 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-SHA10

Hole Dia. D Height H Height H type CAD Days to Ship

Specification/Dimensions

Hole Dia. D(Ø)
10

12

16

20

25

30
Clear
Height H(mm)
20

23

27

31

35

42
Clear
Height H(mm)
- 20
- 23
- 27
- 31
- 35
- 42
Clear
type
- C-SHA
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Shaft Supports T-Shaped, Slit, Lightweight, Compact

Volume Discount

Check FAQ of this product (2 items)

Brand :

MiSUMi Economy

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Overview of Shaft Supports

The Shaft Supports can support and fix the shaft and also bear a certain load.

Product Feature of Shaft Supports

Feature 1: New and original structure, the arc-shaped head is designed for safer installation, the thin bottom design makes the installation more stable, and the locking force is improved by about 10%.
Feature 2: Compared with standard cast products, the space is smaller and the products are thinner.
Feature 3: T-shaped Shaft Supports can be installed and used even if the surrounding space is small. T shape is more suitable for the situation of small front and back space.
Feature 4: slit Shaft Supports can be connected without damaging the shaft.
Feature 5: Economy series Shaft Supports has changed the machining technology and is machined with aluminum drawing material, which is suitable for mass production and reduces the cost.

Dimensional Drawing of Shaft Supports

Economic type Shaft supports T-shaped Dimensional drawing

After the mounting hole D is machined according to the tolerance H7, it may cause stress deformation of the inner hole.
Shaft Supports

Dimensions in ( ) are for reference only (aluminum profiles are processed, and the appearance dimension tolerance is ±0.5mm). The specific dimensions are subject to theactual products.

Specifications Overview of Shaft Supports

Type of Shaft Supports	Material	Surface Treatment	Accessories
C-SHA	Aluminum	Clear Anodized	1 hexagon socket head bolt

Example Use of Shaft Supports

Economic type Shaft supports T-shaped Example of use

■ Mechanism name (Example 1)
Workpiece positioning mechanism.

■ Mechanism function
Carry out high-accuracy positioning of the roughly placed workpiece in the direction of XY.
Roughly place the trays into three positioning rollers → The positioning rollers press the trays → Positioning and fixing are completed.
Suitable for operating environment with medium and low accuracy and medium and low load.

■ Function of Shaft Supports
Shaft Supports are used to fix the inspection mechanism for easy disassembly, and relevant mechanisms are reusable.
Clamp the shaft to prevent the linear bearing from pulling the shaft to move during the motion.

■Mechanism name (Example 2)
Brazing manipulator with air purging

■Mechanism function
The brazing manipulator for robot is used to remove debris from the circuit board by air purging air before brazing.
(Solder provided by other robots)
Suitable for operating environment with medium and low accuracy and medium and low load.

■ Function of Shaft Supports
When adjusting the position of air purging, it can move up and down, rotate and adjust the angle.

Precautions of Shaft Supports

1. Dimension tolerance is ±0.2 where not indicated.
2. Since it is an aluminum product, it is easy to cause slippage if it is locked repeatedly.

Application Industries of Shaft Supports

Smart phone	Electronic & Electrical Appliances	Lithium battery

Automotive	Robotics	Medical

Related Products of Shaft Supports

Bearing with Housing T-Shaped	Shaft Collar Slit	Timing pulley XL Type

Typical model of Shaft Supports: BGHK6000ZZ-20	Typical model of Shaft Supports: SCS8-10	Typical model of Shaft Supports: ATP24XL037-B-N10

Specification Table of Shaft Supports

■Material Specification Table of Shaft Supports

Type of Shaft Supports	Material	Surface Treatment	Accessories
C-SHA	Aluminum	Clear Anodized	1 hexagon socket head bolt

■ Dimension Specification Table of Shaft Supports

Part Number		H	(H₁)	T	L₁	d	E	(S)	(R)	(L)	(B)	(W)	Fastening bolt M
Type	D	H	(H₁)	T	L₁	d	E	(S)	(R)	(L)	(B)	(W)	Fastening bolt M
C-SHA	10	20	35	11	32	5.5	9.5	6	6	42	14	18	M4
	12	23	39	11	32	5.5	10.5	6	7	42	14	20
	16	27	45	14	38	5.5	12	6	9	48	18	25
	20	31	51	16	45	6.6	14	8	10	58	20	30	M5
	25	35	60	18	56	6.6	17	10	13	70	24	38	M6
	30	42	70	20	64	9	21	10	15	80	28	44	M6

Specification Table

■Material Specification Table

Type	Material	Surface Treatment	Accessories
C-SHA	Aluminum	Clear Anodized	1 hexagon socket head bolt

■ Dimension Specification Table

Part Number		H	(H₁)	T	L₁	d	E	(S)	(R)	(L)	(B)	(W)	Fastening bolt M
Type	D	H	(H₁)	T	L₁	d	E	(S)	(R)	(L)	(B)	(W)	Fastening bolt M
C-SHA	10	20	35	11	32	5.5	9.5	6	6	42	14	18	M4
	12	23	39	11	32	5.5	10.5	6	7	42	14	20
	16	27	45	14	38	5.5	12	6	9	48	18	25
	20	31	51	16	45	6.6	14	8	10	58	20	30	M5
	25	35	60	18	56	6.6	17	10	13	70	24	38	M6
	30	42	70	20	64	9	21	10	15	80	28	44	M6

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-SHA10
C-SHA12
C-SHA16
C-SHA20
C-SHA25
C-SHA30

Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Hole Dia. D (Ø)	Height H (mm)	Height H (mm)
₹ 195.00	1 Piece(s)	Available	Same day	10	10	20	20
₹ 206.00	1 Piece(s)	Available	Same day	10	12	23	23
₹ 220.00	1 Piece(s)	Available	Same day	10	16	27	27
₹ 332.00	1 Piece(s)	Available	Same day	10	20	31	31
₹ 663.00	1 Piece(s)	Available	Same day	10	25	35	35
₹ 577.00	1 Piece(s)	Available	Same day	10	30	42	42

Basic Information

Shape	T-Shaped	Shaft Securing Method	Slit	Material	Aluminum Alloy
Surface Treatment	Clear Anodize	Type	Machined Product

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What are the differences between economy series products and standard products? Is performance degraded?: Answer: Compared with standard products, economy series products are more compact. Unnecessary tolerances are reduced, but there is no influence on use at all.
Question: Why are the economy series products so cheap?: Answer: The aluminum drawing profile is adopted, which can minimize the cutting amount and the cost on the premise of satisfying the normal use of customers.

Search by Category / Brand

Search by Category

How can we improve?