Is the joint of the joint processed long type timing belt particularly easy to break?

The joint of this belt is hot-melt connected, although the strength is lower than that of the body part, there will be no abnormalities such as breakage when used under normal tension. But it is not recommended to bend the joint, or breakage will be caused.

What kind of belt is better to use under conditions that require high cleanliness?

The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.

The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?

The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.

What are the advantages of cloth lined timing belts compared to standard ones?

Cloth lined toothed belt reduce the coefficient of friction and reduce noise generation.

Urethane timing belt has changed color after being used for a period of time, will it affect the use?

No, the urethane belt may change color over time, but there is no effect on strength, etc.

What are the two main types of timing belts according to their functions? What is the role?

Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(12 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-LTBJA-T10150-[70-5000/1]

Properties Belt Width Number of Teeth Belt Nominal Width type Belt Type CAD Days to Ship

Specification/Dimensions

Properties
- Standard
- Both Sides Cloth Lined
Clear
Belt Width(mm)
10

15

20

25

30

40

50
Clear
Number of Teeth
[70-5000/1]
Clear
Belt Nominal Width
100

150

200

250

300

400

500
Clear
type
- C-LTBJA
- C-LTBRA
Clear
Belt Type
T5

T10
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

13 Day(s) or Less
Clear

Specify Alterations

Closed Belts T Type

Name: Closed Belts T Type
Brand: MISUMI
Availability: PreOrder

Check FAQ of this product (6 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

C-LTBJA-T10150-[70-5000/1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

-Closed Belts T Type from MISUMI.
-This product series has 2 types available, C-LTBJA (Standard type) and C-LTBRA (Both Sides Cloth Lined).
-This is an economy item; The price is cheaper than the MISUMI standard product.
-The material of the timing belt is made of urethane with steel core wire.
-The allowable operating temperature range is -20 ~ 60°C. (Reference Value)
-Urethane belts may change color over time, but will not be affected to strength, etc.

Economy Urethane T-Type Closed Belt

Precise Power Wide Range Closed-Loop Design

- Offer reliable power transmission for various applications. Combining high-quality materials with precise engineering, these belts deliver exceptional performance and durability.

- Made from high-grade urethane, these belts offer superior resistance to abrasion, oil, and grease, ensuring extended service life even in demanding environments.

- Available in various tooth pitches and belt widths.

- The optional double-sided cloth lining reduces friction between the belt and conveying objects or pulleys, minimizing noise generation for quieter operation.

- The trapezoidal tooth profile ensures accurate power transmission, making these belts suitable for applications requiring precise timing and synchronization.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Conveyer Product Overview

The toothed Conveyer, timing belt is a component that transmits the rotational power generated by the motor. Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
The long toothed timing belt is a belt that freely specifies the number of teeth and is suitable for long-distance timing transmission.
There is also a both sides cloth-lined type suitable for cumulative transmission and noise reduction.

Conveyer Product Feature

Feature 1: The Conveyer product has built-in steel core wire, which is more cost-effective and has a wider application range.
Feature 2: There is no exposed steel core wire on the side of the timing belt to avoid scratching the workpiece or hurting the operator.
Feature 3: In addition to standard Conveyer belts, there are also both sides cloth lined belts.
It can reduce the coefficient of friction between the conveying objects or between pulleys, and lower the noise.
Feature 4: Regular sampling of Conveyer products is made to ensure a strength in the connection. (See the figure below)
Measure by a pull force tester

Dimensional Drawing Conveyer

Size standards drawing of long toothed timing belt

Specifications Conveyer Overview

■Conveyer Material Table

Conveyer Type	Conveyer Types	Material
		①Body	②Core Wire	③ Canvas
C-LTBJA	Standard	Urethane	Steel wire	－
C-LTBRA	Both Sides Cloth Lined			Nylon canvas

■Conveyer Specification Table

Belt Type	Tooth pitch	2θ(°)	H	h	i	L	Unit weight g/m (width: 10mm)
Belt Type	Tooth pitch	2θ(°)	H	h	i	L	Standard
T5	5	40	2.2	1.2	1	1.8	25
T10	10	40	4.5	2.5	2	3.5	46

Urethane Conveyer belts may change color over time, but strength, etc. will not be affected.

Operating temperature -20℃ to 60℃ (reference value).

The Conveyer total length is the number of teeth x the tooth pitch. This is the calculated value. MISUMI takes the number of teeth as the basis for shipment.

Example of Conveyer Use

This provides a reference for the use of urethane Conveyer belts and is not a functional guarantee for actual use.

Equipment Name: Conveyor transfer device with different heights
Function Description:
Transfer the workpiece through the motor roller, and use the cylinder mechanism so that the workpiece drop to the lower Conveyer for transmission. The purpose of transmission at different heights is achieved.

Application Industries Conveyer

Conveyer Food	Conveyer Semiconductor	Conveyer Smart phone

Conveyer Medical	Conveyer Electronic & Electrical Appliances	Conveyer Lithium battery

Conveyer Precautions

■ Conveyer Chemical-Resistant
Chemical resistance of long toothed timing belt

■ Precautions for Conveyer storage
① Avoid sunlight.
② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
In particular, do not make oil adhere to the belt, otherwise it will cause the belt to swell, significantly shortening the life of the belt.
③ Operating temperature -20℃ to 60℃.
④ Do not accumulate in large quantities or forcibly bend.
⑤ Do not place it directly on the ground.
⑥ Do not make the belt contact with chemicals.

Related Conveyer Products

(Economy series) slit Conveyer timing belt	(Economy series) Conveyer timing pulley S3M	(Economy series) Conveyer timing belt connecting tooth plate

Typical Conveyer model: C-TTBO-T5100-200	Typical Conveyer model: C-HTPA16S3M100-A-P5	Typical Conveyer model: C-TBCR-T5100
Advantages: Number of teeth can be freely specified, suitable for reciprocating motion	Advantages: Less wear of timing belt and longer service life	Advantages: Can prevent the belt from being too tight

Specification Conveyer Table

Please Conveyer order after selecting part number and parameters according to the selection steps

		Part NumberConveyer TYPE	-	Conveyer Belt Number·Nominal Belt Width	-	Number of Teeth
		C-LTBJA	-	T5100	-	200

Part Number	Conveyer Belt Type	Belt Nominal Width	Number of Teeth Lower Limit to Upper Limit	Belt Width (mm)	Allowable tension (N)
Conveyer Type	Conveyer Belt Type	Belt Nominal Width	Number of Teeth Lower Limit to Upper Limit	Belt Width (mm)	Allowable tension (N)
C-LTBJA (Standard) C-LTBRA (Both Sides Cloth Lined)	T5	100	100~10000	10	150
		150		15	200
		200		20	270
		250		25	350
	T10	150	70~5000	15	320
		200		20	440
		250		25	640
		300		30	720
		400		40	960
		500		50	1280

The Conveyer total length is (number of teeth×tooth pitch).

kgf = N × 0.101972

The allowable tension is only the permissible value associated with the tensile load.

■ Comparison Table of Conveyer Coefficient of Friction (Reference Value)

Conveyer Belt type mating parts materials	Toothed Face· Back
Conveyer Belt type mating parts materials	Cloth Lined	Standard
Stainless Steel	0.3	0.6
Polyamide	0.2	0.3

The values in the table are examples of Conveyer measured values instead of standard values.

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-LTBJA-T10150-[70-5000/1]
C-LTBJA-T10200-[70-5000/1]
C-LTBJA-T10250-[70-5000/1]
C-LTBJA-T10300-[70-5000/1]
C-LTBJA-T10400-[70-5000/1]
C-LTBJA-T10500-[70-5000/1]
C-LTBRA-T10150-[70-5000/1]
C-LTBRA-T10200-[70-5000/1]
C-LTBRA-T10250-[70-5000/1]
C-LTBRA-T10300-[70-5000/1]
C-LTBRA-T10400-[70-5000/1]
C-LTBRA-T10500-[70-5000/1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Properties	Belt Type	Belt Width (mm)	Number of Teeth	Belt Nominal Width
-	1 Piece(s)	13 Day(s)	10	Standard	T10	15	70 ～ 5000	150
-	1 Piece(s)	13 Day(s)	10	Standard	T10	20	70 ～ 5000	200
-	1 Piece(s)	13 Day(s)	10	Standard	T10	25	70 ～ 5000	250
-	1 Piece(s)	13 Day(s)	10	Standard	T10	30	70 ～ 5000	300
-	1 Piece(s)	13 Day(s)	10	Standard	T10	40	70 ～ 5000	400
-	1 Piece(s)	13 Day(s)	10	Standard	T10	50	70 ～ 5000	500
-	1 Piece(s)	13 Day(s)	10	Both Sides Cloth Lined	T10	15	70 ～ 5000	150
-	1 Piece(s)	13 Day(s)	10	Both Sides Cloth Lined	T10	20	70 ～ 5000	200
-	1 Piece(s)	13 Day(s)	10	Both Sides Cloth Lined	T10	25	70 ～ 5000	250
-	1 Piece(s)	13 Day(s)	10	Both Sides Cloth Lined	T10	30	70 ～ 5000	300
-	1 Piece(s)	13 Day(s)	10	Both Sides Cloth Lined	T10	40	70 ～ 5000	400
-	1 Piece(s)	13 Day(s)	10	Both Sides Cloth Lined	T10	50	70 ～ 5000	500

Basic Information

Belt Shape	Closed End (Weld Jointing)	Belt Material	Polyurethane	Core Wire Material	Steel Cord
Belt Shape Type	Trapezoidal Tooth Profile Metric

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Is the joint of the joint processed long type timing belt particularly easy to break?: Answer: The joint of this belt is hot-melt connected, although the strength is lower than that of the body part, there will be no abnormalities such as breakage when used under normal tension. But it is not recommended to bend the joint, or breakage will be caused.
Question: What kind of belt is better to use under conditions that require high cleanliness?: Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?: Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.
Question: What are the advantages of cloth lined timing belts compared to standard ones?: Answer: Cloth lined toothed belt reduce the coefficient of friction and reduce noise generation.
Question: Urethane timing belt has changed color after being used for a period of time, will it affect the use?: Answer: No, the urethane belt may change color over time, but there is no effect on strength, etc.
Question: What are the two main types of timing belts according to their functions? What is the role?: Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.

Check other FAQ (3 items) Hide

Search by Category / Brand

Search by Category

How can we improve?