How to distinguish between two holes and three holes in use?

There is no essential difference between two-hole and three-hole products in use, but the three-hole products have one more fixing point, so the allowable load will be higher than the two-hole products, which can be distinguished according to the actual use situation.

Is it necessary to use nuts for the stainless steel butterfly hinge and steel butterfly hinge (round hole) mentioned in the precautions?

The recommended nut is not necessary for installation in a general structure. It can be fixed with separate small nuts matching the screws. However, when installed in a panel, because the panel is generally thin and the screws cannot be locked and fixed, nuts are required as supporting fasteners.

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(15 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-SHHPSKN5-2

Length Width (W) type CAD Days to Ship

Specification/Dimensions

Length(mm)
40

41

48

59

66

70

75

78

96

113
Clear
Width (W)(mm)
35

36

48

50

62

80
Clear
type
- C-SHHPSKN
- C-SHHPTN
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Stainless Steel / Steel Hinges

Name: Stainless Steel / Steel Hinges
Brand: MISUMI
Availability: InStock

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (2 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

C-SHHPSKN5-2

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Overview of Flat Hinges

Economy series Standard butterfly Flat Hinges Materials are divided into three types: stainless steel, stainless steel hairline and steel.
Flat Hinges,The product has hole spacing applicable to aluminum alloy profiles, and can be used as profile accessories.
The surface treatment varies with materials of various products in the series. Please check the material table for confirmation.
This series is round hole products. For tapered hole products, please refer to the catalog.

Stainless steel butterfly Flat Hinges Steel butterfly Flat Hinges (round hole) 2-hole product drawings

Economy series Butterfly hinge Round hole type 2-hole product drawings

Stainless steel butterfly Flat Hinges Steel butterfly Flat Hinges (round hole) 3-hole product drawings

Economy series Butterfly hinge Round hole type 3-hole product drawings

Product Feature of Flat Hinges

【Features of Flat Hinges】
Standard butterfly Flat Hingess, with edges and corners circularly cut. The products are round hole type, and common flat head screws can be used together.
Flat Hinges,Products are divided into single-sided 2-hole type and single-sided 3-hole type. Please refer to the specification table for details.
To mount the butterfly Flat Hingess to panels, etc., it is recommended to use HHPNT, HHPFNT series butterfly Flat Hinges nuts.

Specifications Overview of Flat Hinges

Product Material, Surface Treatment Overview of Flat Hinges:
・Flat Hinges Material Table

Type of Flat Hinges	Material	Surface Treatment
C-SHHPSKN	SUS304	Sandblasting Grinding
C-SHHPTN	SPCC	Chrome Plated

Example Use of Flat Hinges

Stainless steel butterfly Flat Hinges Steel butterfly Flat Hinges (round hole) Example of use

Economy series Butterfly hinge Round hole type Example of use: application in the design of frame structural member with viewing window

Precautions of Flat Hinges

To install the hinge on the panel, etc., it is recommended to choose the nut for butterfly Flat Hinges. For details, you can search TYPE: HHPNT or HHPFNT
in the website to choose according to the size requirements.
Please try to choose flat head screws for matching use. If you use hex socket head cap screws, the opening and closing angle will be reduced.

Dimensional Drawing of Flat Hinges

Economy series Butterfly Flat Hinges Round hole type Dimensional drawing
Refer to the Specification Table below for detailed product dimensions

Specification Table of Flat Hinges

Part Number	-	Number of holes on one side
C-SHHPSKN6	-	3

Part Number		Number of holes on one side	Type	^＊Allowable Load		Weight g	L	W	K	P	J	S	N	T	E	R	CR	D
Type	No.			kg	N
C-SHHPSKN	5	2	Symmetrical	9	88	43	41	36	8	25	7.5	21	5.5	2	4.6	4.6	7.5	5
		3		11	108	70	66
	6	2		12	117	60	48	48	9	30	8	32	6.5
		3		15	147	98	78
	8	2		25	245	130	59	62	11	37	10	42		3	5.6	5.6	10
		3		38	372	230	96								6.1	6.1		6
	5P	2	Asymmetric type	9	88	36	40	35	5	20	6	23	4.2	1.5	3	3	4	3
	6P	2		15	147	83	75	50	23	40	10	30	5	2	4.5	4.5	4	4.5

* The allowable load is the value when 2 pieces are used.

Dimensional Drawing

Economy series Butterfly hinge Round hole type Dimensional drawing
Refer to the Specification Table below for detailed product dimensions

Specification Table

Part Number	-	Number of holes on one side
C-SHHPSKN6	-	3

Part Number		Number of holes on one side	Type	^＊Allowable Load		Weight g	L	W	K	P	J	S	N	T	E	R	CR	D
Type	No.			kg	N
C-SHHPSKN	5	2	Symmetrical	9	88	43	41	36	8	25	7.5	21	5.5	2	4.6	4.6	7.5	5
		3		11	108	70	66
	6	2		12	117	60	48	48	9	30	8	32	6.5
		3		15	147	98	78
	8	2		25	245	130	59	62	11	37	10	42		3	5.6	5.6	10
		3		38	372	230	96								6.1	6.1		6
	5P	2	Asymmetric type	9	88	36	40	35	5	20	6	23	4.2	1.5	3	3	4	3
	6P	2		15	147	83	75	50	23	40	10	30	5	2	4.5	4.5	4	4.5

* The allowable load is the value when 2 pieces are used.

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-SHHPSKN5-2
C-SHHPSKN5-3
C-SHHPSKN5P-2
C-SHHPSKN6-2
C-SHHPSKN6-3
C-SHHPSKN6P-2
C-SHHPSKN8-2
C-SHHPSKN8-3
C-SHHPTN5-2
C-SHHPTN5-3
C-SHHPTN6-3
C-SHHPTN8-2
C-SHHPTN8-3
C-SHHPTN845-2
C-SHHPTN845-3

Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Length (mm)	Width (W) (mm)	Allowable Load (N)
₹ 256.00	1 Piece(s)	Available	Same day	10	41	36	88
₹ 352.00	1 Piece(s)	Available	Same day	10	66	36	108
₹ 148.00	1 Piece(s)	Available	Same day	10	40	35	88
₹ 301.00	1 Piece(s)	Available	Same day	10	48	48	117
₹ 381.00	1 Piece(s)	Available	Same day	10	78	48	147
₹ 301.00	1 Piece(s)	Available	Same day	10	75	50	147
₹ 404.00	1 Piece(s)	Available	Same day	10	59	62	245
₹ 563.00	1 Piece(s)	Available	Same day	10	96	62	372
₹ 329.00	1 Piece(s)	Available	Same day	10	41	36	88
₹ 486.00	1 Piece(s)	Available	Same day	10	66	36	108
₹ 508.00	1 Piece(s)	Available	Same day	10	78	48	147
₹ 548.00	1 Piece(s)	Available	Same day	10	59	62	245
₹ 735.00	1 Piece(s)	Available	Same day	10	96	62	372
₹ 592.00	1 Piece(s)	Available	Same day	10	70	80	294
₹ 771.00	1 Piece(s)	Available	Same day	10	113	80	392

Basic Information

Main Body Type	Standard	Operating Environment	Standard	Mounting Method	Screw Mounting
Additional Function	Not Provided	Mounting Screw Hole Type	Round Hole

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: How to distinguish between two holes and three holes in use?: Answer: There is no essential difference between two-hole and three-hole products in use, but the three-hole products have one more fixing point, so the allowable load will be higher than the two-hole products, which can be distinguished according to the actual use situation.
Question: Is it necessary to use nuts for the stainless steel butterfly hinge and steel butterfly hinge (round hole) mentioned in the precautions?: Answer: The recommended nut is not necessary for installation in a general structure. It can be fixed with separate small nuts matching the screws. However, when installed in a panel, because the panel is generally thin and the screws cannot be locked and fixed, nuts are required as supporting fasteners.

Search by Category / Brand

Search by Category

How can we improve?