Can the economy series adjuster, flat bottom type with glue, be used on inclined ground?

Please use the economy series adjuster, flat bottom type with glue, on flat ground and try not to use it on inclined ground, which will cause deformation of the adjuster.

Does the economy series adjuster, flat bottom type with glue, have a height adjustment knob?

The economy series adjuster, flat bottom type with glue, does not have a height adjustment knob (handle) and is just a general adjuster.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(11 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-CFJGN8-60

Width D Allowable Load (Details) Thread Length A Body Height L Nominal of Thread M Thread Length A type CAD Days to Ship

Specification/Dimensions

Width D(mm)
45

70

80
Clear
Allowable Load (Details)(kN)
2.1

2.3

3.5

3.7

3.9

4.6

4.9

5

6.7

7.7
Clear
Thread Length A(mm)
60

80

100

120

150

200
Clear
Body Height L(mm)
81

102.5

111

122.5

131

135

151

155

185

188

238
Clear
Nominal of Thread M(mm)
8

10

12

16

20
Clear
Thread Length A(mm)
60

80

100

120

150

200
Clear
type
- C-CFJGN
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Leveling Mounts Bottom Flat With Rubber

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (2 items)

Brand :

MiSUMi Economy

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

- Economy series Leveling Mounts Bottom Flat with Rubber.
- Type: Adjusting Bolt with Rubber Foot.
- The part number is C-CFJGN.
- Body Material: Q235 Carbon Steel.
- Body Surface Treatment: Zinc Plating solution.
- Bottom Pads Part: Rubber.
- Nominal of Thread size (M): 8, 10, 12, 16 and 20.
- Thread Length size: 60, 80, 100, 120, 150 and 200 mm.
- Screw is smooth and can be manually for assembly.
- This is an economy series; The price is cheaper than the MISUMI standard product.

Economy Flat Rubber Mount

Flat bottomZinc platingLeveling

- High-quality Q235 carbon steel construction

- Durable synthetic rubber bottom pad

- Zinc plating for corrosion resistance

- Screw with various thread size options

- Ideal for leveling and stabilizing heavy equipment

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Adjuster Product Overview

Economy series Adjuster Flat bottom type with glue
An adjuster with high quality, cheap price and excellent cost performance

Economy series Adjuster Flat bottom type with glue

Adjuster Product Feature

【Adjuster Features】
No height adjustment knob.

【Material Table】

Type	A Body		B Glue Part
Type	Material	Surface Treatment	Material
C-CFJGN	Q235	Zinc Plating	Rubber

Note: The below material information is for VIETNAM only:

Adjuster Usage Method

Recommended adjuster mounting method
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the adjuster through threads. After assembling the required number of adjusters, lower the forklift and adjust horizontally.

Adjuster Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection adjuster should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.

Example of Use Adjuster

Economy series Adjuster Flat bottom type with glue

Dimensional Adjuster Drawing


Economy series Adjuster Flat bottom type with glue

Adjuster Specification Table

Part Number			L	D	ℓ1	ℓ2	E	B	H	Vertical Load （kN）	Weight (g)
Type	M	A
C-CFJGN	8	60	81	45	5.5	6.5	15.5	13	6	2.07	130
	10	80	102.5		7	8		17		2.25	170
		100	122.5							2.34	181
	12	80	111	70	8	10	23	19	7	3.51	220
		100	131							3.69	234
		120	151							3.87	250
	16	100	135	80	10	13	25	24	8	4.59	374
		120	155							4.86	410
		150	185							5.04	453
	20	150	188		13	16		30		6.66	624
		200	238							7.65	722

Note: Thread size follows standard GB5782-1986 with below tolerance, please refer:

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-CFJGN8-60
C-CFJGN10-80
C-CFJGN10-100
C-CFJGN12-80
C-CFJGN12-100
C-CFJGN12-120
C-CFJGN16-100
C-CFJGN16-120
C-CFJGN16-150
C-CFJGN20-150
C-CFJGN20-200

Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Width D (mm)	Allowable Load (Details) (kN)	Thread Length A (mm)	Body Height L (mm)	Nominal of Thread M (mm)	Thread Length A (mm)
₹ 176.00	1 Piece(s)	Available	Same day	10	45	2.1	60	81	8	60
₹ 208.00	1 Piece(s)	Available	Same day	10	45	2.3	80	102.5	10	80
₹ 252.00	1 Piece(s)	Available	Same day	10	45	2.3	100	122.5	10	100
₹ 218.00	1 Piece(s)	Available	Same day	10	70	3.5	80	111	12	80
₹ 239.00	1 Piece(s)	Available	Same day	10	70	3.7	100	131	12	100
₹ 203.00	1 Piece(s)	Available	Same day	10	70	3.9	120	151	12	120
₹ 358.00	1 Piece(s)	Available	Same day	10	80	4.6	100	135	16	100
₹ 427.00	1 Piece(s)	Available	Same day	10	80	4.9	120	155	16	120
₹ 302.00	1 Piece(s)	Available	Same day	10	80	5	150	185	16	150
₹ 590.00	1 Piece(s)	Available	Same day	10	80	6.7	150	188	20	150
₹ 483.00	1 Piece(s)	Available	Same day	10	80	7.7	200	238	20	200

Basic Information

Type	Adjusting Bolt Type	Adjusting Bolt Shape Type	Rubber Foot Type	Height Adjusting Handle	Not Provided
Thread Material	Steel	Thread Surface Treatment	Zinc Plating	Body Material	Steel
Main Body Surface Treatment	Galvanizing	Rubber Material	Synthetic Rubber	Properties	Standard
Swivel Mechanism	Not Provided

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Can the economy series adjuster, flat bottom type with glue, be used on inclined ground?: Answer: Please use the economy series adjuster, flat bottom type with glue, on flat ground and try not to use it on inclined ground, which will cause deformation of the adjuster.
Question: Does the economy series adjuster, flat bottom type with glue, have a height adjustment knob?: Answer: The economy series adjuster, flat bottom type with glue, does not have a height adjustment knob (handle) and is just a general adjuster.

Search by Category / Brand

Search by Category

How can we improve?