Can the economy series adjuster, flat bottom standard type, be used on inclined ground?

Please use the economy series adjuster, flat bottom standard type, on flat ground, and try not to use it on inclined ground, which will lead to deformation of the adjuster.

Does the economy series adjuster, flat bottom standard type, have a height adjustment knob?

The economy series adjuster, flat bottom standard type, does not have a height adjustment knob (handle) and is just a general adjuster.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(10 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-CNFJN10-80

Thread Material Thread Surface Treatment Main Body Surface Treatment Width D Allowable Load (Details) Thread Length A Body Height L Nominal of Thread M Thread Length A type Body Material CAD Days to Ship

Specification/Dimensions

Thread Material
- Stainless Steel
  - Stainless Steel
- Steel
  - Steel
Clear
Thread Surface Treatment
- Not Provided
- Zinc Plating
Clear
Main Body Surface Treatment
- Galvanizing
Clear
Width D(mm)
38

60

75
Clear
Allowable Load (Details)(kN)
4

4.5

5.5

6.8
Clear
Thread Length A(mm)
80

100

120

150

200
Clear
Body Height L(mm)
99.5

119.5

128

132

148

152

155

182

185

235
Clear
Nominal of Thread M(mm)
10

12

16

20
Clear
Thread Length A(mm)
80

100

120

150

200
Clear
type
- C-CNFJN
- C-CNFJNS
Clear
Body Material
- Stainless Steel
  - Stainless Steel
- Steel
  - Steel
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Leveling Mounts Metal Pad Standard

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (2 items)

Brand :

MiSUMi Economy

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

- Economy series Adjuster Flat bottom standard type
- Type: Adjuster Bolt and Flat bottom.
- Part number for series including of C-CNFJN and C-CNFJNS.
- Body Material: Q235 Carbon Steel and SUS304 Stainless steel.
- Surface Treatment: Zinc Plating for Q235 Carbon Steel.
- Nominal of Thread size (M): 10, 12, 16 and 20.
- Thread Length size: 80, 100, 120, 150 and 200 mm.
- Screw is smooth and can be manually for assembly.
- This is an economy series; The price is cheaper than the MISUMI standard product.

Economy Metal Pad Leveling Mount

Cost-saving Durability Versatility

- Cost-effective solution for heavy loads

- Available in multiple steel options.

- Zinc plating for superior durability

- Easy manual assembly with smooth screw threads

- Ideal for precise leveling in various applications

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Adjuster Product Overview

Economy series Adjuster Flat bottom standard type
An adjuster with high quality, cheap price and excellent cost performance

Economy series Adjuster Flat bottom standard type

Adjuster Product Feature

【Adjuster Features】
When the threaded part rotates, it inclines slightly.
No height adjustment knob.

【Material Table】

Type	Material	Surface Treatment
C-CNFJN	Q235	Zinc Plating
C-CNFJNS	SUS304	-

Adjuster Usage Method

Recommended adjuster mounting method
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the adjuster through threads. After assembling the required number of adjusters, lower the forklift and adjust horizontally.

Adjuster Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection adjuster should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.

Example of Use Adjuster

Economy series Adjuster Flat bottom standard type

Dimensional Adjuster Drawing


Economy series Adjuster Flat bottom standard type

Adjuster Specification Table

Part Number			L	D	ℓ1	ℓ2	E	B	t	Vertical Load （kN）	Weight (g)
Type	M	A
C-CNFJN C-CNFJNS	10	80	99.5	38	7	8	12.5	17	1.6	4	115
		100	119.5							4	130
	12	100	128	60	8	10	20	19	2	4.5	212
		120	148							4.5	235
	16	100	132	75	10	13	22	24		5.5	375
		120	152							5.5	414
		150	182							5.5	454
	20	120	155		13	16		30		6.8	575
		150	185							6.8	625
		200	235							6.8	723

Note:
Thread size follows standard GB5782-1986 with below tolerance, please refer:
Adjuster Specification Table

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-CNFJN10-80
C-CNFJN10-100
C-CNFJN12-100
C-CNFJN12-120
C-CNFJN16-100
C-CNFJN16-120
C-CNFJN16-150
C-CNFJN20-120
C-CNFJN20-150
C-CNFJN20-200

Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Thread Material	Thread Surface Treatment	Body Material	Main Body Surface Treatment	Width D (mm)	Allowable Load (Details) (kN)	Thread Length A (mm)	Body Height L (mm)	Nominal of Thread M (mm)	Thread Length A (mm)
₹ 153.00	1 Piece(s)	Available	Same day	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Galvanizing	38	4	80	99.5	10	80
₹ 192.00	1 Piece(s)	Available	Same day	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Galvanizing	38	4	100	119.5	10	100
₹ 155.00	1 Piece(s)	Available	Same day	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Galvanizing	60	4.5	100	128	12	100
₹ 185.00	1 Piece(s)	Available	Same day	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Galvanizing	60	4.5	120	148	12	120
₹ 193.00	1 Piece(s)	Available	Same day	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Galvanizing	75	5.5	100	132	16	100
₹ 204.00	1 Piece(s)	Available	Same day	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Galvanizing	75	5.5	120	152	16	120
₹ 204.00	1 Piece(s)	Available	Same day	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Galvanizing	75	5.5	150	182	16	150
₹ 395.00	1 Piece(s)	Available	Same day	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Galvanizing	75	6.8	120	155	20	120
₹ 297.00	1 Piece(s)	Available	Same day	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Galvanizing	75	6.8	150	185	20	150
₹ 354.00	1 Piece(s)	Available	Same day	10	[Steel] Steel	Zinc Plating	[Steel] Steel	Galvanizing	75	6.8	200	235	20	200

Basic Information

Type	Adjusting Bolt Type	Adjusting Bolt Shape Type	Standard Type	Height Adjusting Handle	Not Provided
Properties	Standard	Swivel Mechanism	Not Provided

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Can the economy series adjuster, flat bottom standard type, be used on inclined ground?: Answer: Please use the economy series adjuster, flat bottom standard type, on flat ground, and try not to use it on inclined ground, which will lead to deformation of the adjuster.
Question: Does the economy series adjuster, flat bottom standard type, have a height adjustment knob?: Answer: The economy series adjuster, flat bottom standard type, does not have a height adjustment knob (handle) and is just a general adjuster.

Search by Category / Brand

Search by Category

How can we improve?