Leveling Mounts Metal Pad For Heavy Load
Brand :
MISUMI
Caution
Product Description
Economy series Adjuster Bolt for Heavy Load
[Material]
•Body: Steel/Q235, Stainless Steel/SUS304
[Surface treatment]
•Body: Zinc Plating/Galvanizing
•Thread: Zinc Plating/Galvanizing
[Nominal of Thread(M)] 8, 10, 12, 16, 20 and 24
[Thread Length(mm)] 50, 80, 100, 120, 150, 180 and 200
[Base Width/D(mm)] 50, 60, 80, 100
•This is an economy series; The price is cheaper than the MISUMI standard product.
Note: The below material information is for Vietnam only:
![Note: The below material information is for Vietnam only]()
Economy series Adjuster Heavy load type
Adjuster Product Overview
Economy series Adjuster Heavy load type
An adjuster with high quality, cheap price and excellent cost performance
An adjuster with high quality, cheap price and excellent cost performance
 |
| Economy series Adjuster Heavy load type |
Adjuster Product Feature
【Adjuster Features】
When the threaded part rotates, it inclines slightly.
No height adjustment knob.
【Material Table】
When the threaded part rotates, it inclines slightly.
No height adjustment knob.
【Material Table】
| Type |  Material |  Surface Treatment | ||
| Thread | Body | Thread | Body | |
| C-CFJFN | Q235 | Q235 | Galvanizing | Galvanizing |
| C-CFJFNS | SUS304 | SUS304 | True Color | - |
Note: The below material information is for Vietnam only:
Adjuster Usage Method
Recommended adjuster mounting method
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the adjuster through threads. After assembling the required number of adjusters, lower the forklift and adjust horizontally.
Adjuster Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection adjuster should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the adjuster through threads. After assembling the required number of adjusters, lower the forklift and adjust horizontally.
Adjuster Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection adjuster should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.
Example of Use Adjuster
Economy series Adjuster Heavy load type