Why does the flange drop during use of a timing pulley?

The function of the flange is to prevent production accidents caused by deviation and drop of the timing belt. Therefore, the flange drops mainly because it is squeezed off by the timing belt that has deviated for a long time. We recommend that the customer regularly check the condition of the timing belt of the equipment to avoid its deviation.

Why does the timing pulley has no threaded hole?

If you have requirements for fixing screws, we recommend that you choose a timing pulley with the shaft hole specification P (round hole + threaded hole) or N·C (keyway hole + threaded hole).

What should be done if there is jitter during use of a timing belt?

Readjust the tension of the timing pulley. Generally, the belt runs unstably due to excessive shaft spacing and insufficient tension.

Why cannot be the threaded hole of a MISUMI aluminum timing pulley locked tightly?

As the aluminum material is relatively soft, slippage may occur if the tightening force is too large during locking. We recommend that the customer stops tightening once an obstruction is felt.

How to fix a timing pulley when the shaft hole specification is H (round hole)?

Generally, H (round hole) can be used only after additional processing. If you need a product that can be directly fixed and used, please choose MISUMI P (round hole + threaded hole) or N (keyway hole + threaded hole) specifications.

What does the number in the timing pulley S2M, S3M, P2M, P3M, T5, T10, 2GT, 3GT, etc. mean?

It mainly represents the tooth pitch of the belt, that is, the distance between two adjacent teeth. They are also the tooth profile models in the timing belt industry.

How to choose a timing belt after selecting a timing pulley?

First, the series must be matched. For example, the timing belts of S2M, S3M, and S5M can only match the timing pulleys of S2M, S3M, and S5M. Then, select the timing belt with an width corresponding to the ones indicated in the timing pulley specifications. Finally, select the needed perimeter.

What does the number in the timing pulley S2M, S3M, P2M, P3M, T5, T10, 2GT, 3GT, etc. mean?

It mainly represents the tooth pitch of the belt, that is, the distance between two adjacent teeth. They are also the tooth profile models in the timing belt industry.

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-ATP24MXL025-B-P6

Number of Teeth Operating Belt Width type Type Belt Width Used Number of Teeth Pulley Shape Material Belt Width Used(Inch) Shaft Bore Dia. d Shaft Hole Shape CAD Days to Ship

Specification/Dimensions

Number of Teeth
30
Clear
Operating Belt Width(inch)
- 0.25
Clear
type
- C-ATP□□MXL
Clear
Type
- Timing Pulleys
Clear
Belt Width Used(mm)
4.8

6.4

9.5
Clear
Number of Teeth(T)
14

15

16

18

19

20

22

24

26

28

30

32

36

40

48
Clear
Pulley Shape
- Shape A
- Shape B
- Shape K
Clear
Material
- Aluminum
  - Aluminum Alloy
  - Ultra Super Duralmin Type Aluminum Alloy
Clear
Belt Width Used(Inch)(Inch)
0.19

0.25

0.37
Clear
Shaft Bore Dia. d(mm)
4

5

6

6.35

8
Clear
Shaft Hole Shape
- N
- P
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

7 Day(s) or Less
Clear

Specify Alterations

Timing Pulleys MXL (C-ATP24MXL025-B-P6)

Volume Discount

Check FAQ of this product (8 items)

Brand :

MiSUMi Economy

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Timing Pulleys MXL
Timing Pulleys are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Belt Width Used (mm.) : 4.8, 6.4 and 9.5
● Belt Width Used (Inch.) : 0.19, 0.25 and 0.37
● Applicable with Belt Type : MXL
● Number of Teeth Minimum/Maximum : 14 to 48
● Shaft Bore Diameter (mm.) : 4, 5, 6, 6.35 and 8
● Shaft Bore Specs. : Can select between Round Hole, Round Hole + Tap and New JIS keyway + Tap
● Material : Aluminum Alloy
● Surface treatment : Clear Anodized
[Application]
Timing pulleys are frequently utilized in systems that incorporate timing belts to regulate and govern the movement of the machinery.

Economy MXL Timing Pulley

Timing pulleys Aluminum pulleys Belt drive systems

- Multiple sizes with various teeth counts available.

- Aluminum construction ensures durability and lightweight

- Clear anodized finish enhances corrosion resistance

- Suitable for medium-precision reciprocating and conveyance systems

- Easy assembly with chamfered threaded holes

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Usually, timing pulleys, timing idlers and timing belts are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys, timing idlers and timing belts.

Dimensional Drawing

Tapped Hole Size Table
(Shaft Bore Specs.: P·N)

dH7 Shaft Bore ID	2-M (Coarse Thread)
3~5	M3×3
6~18	M4×3
19~21	M5×4

	Pulley Shape	Shape B	Shape K
The tooth groove size varies slightly with the number of teeth (Tooth pitch: 2.032 mm)

Shaft Bore Specs.

P Round Hole + Threaded Hole

MISUMI timing pulley shaft hole P round hole and threaded hole specifications

Material

Material		Surface Treatment
Pulley	Flange

Aluminum Alloy	Aluminum Alloy	Clear Anodized

Specifications Overview

Part Number			Pulley Shape	Shaft Hole Specifications H Bore Dia.d	P.D.	O.D.	F	E
Type	Number of Teeth	Applicable Belt	Pulley Shape	Shaft Hole Specifications H Bore Dia.d	P.D.	O.D.	F	E
C－ATP	16	MXL025	A	4·5	10.35	9.84	14	8
	20	MXL019		4·6	12.94	12.43	18	11
	20	MXL025		4·6·7	12.94	12.43	18	11
	24	MXL025		6·8	15.52	15.02	20	13
	24	MXL037		5	15.52	15.02	20	13
	25	MXL019		8	16.17	15.66	20	13
	27	MXL037		6	17.46	16.96	22	14
	28	MXL025		4	18.11	17.6	22	14
	30			5·6·8	19.4	18.9	25	16
	32			5	20.7	20.19	25	16
	32	MXL037		8	20.7	20.19	25	16
	36	MXL025		5·12	23.29	22.78	28	18
	40			5	25.87	25.36	30	20
	48			8·20	31.05	30.54	35	25
	60			6·8	38.81	38.3	44	32

Part Number			Pulley Shape	Shaft Hole Specifications N Bore Dia.d	P.D.	O.D.	F	E
Type	Number of Teeth	Applicable Belt
C－ATP	30	MXL025	A	8	19.4	18.9	25	16
	36	MXL037		10	23.29	22.78	28	18

Detailed specifications are available on the official website

Part Number			Pulley Shape	Shaft Hole Specifications P Bore Dia.d	P.D.	O.D.	D	F	E
Type	Number of Teeth	Applicable Belt
C－ATP	20	MXL019	B	4·5	12.94	12.43	9	18	11
		MXL025		3·4·5
	21			5	13.58	13.07	9	18	11
	22			5	14.23	13.72	9	18	11
	22	MXL037		5	14.23	13.72	9	18	11
	23	MXL019		6	14.88	14.37	11	20	13
		MXL025		5·6
	24	MXL019		4·5·6	15.52	15.02	11	20	13
		MXL025		5
				6
		MXL037		5·6.35
				8
	25	MXL019		5	16.17	15.66	11	20	13
		MXL025		5·6
		MXL037		6.35
	26	MXL025		5·6·8	16.82	16.31	12	22	14
	28	MXL019		8	18.11	17.6	12	22	14
	28	MXL025		5·6.35·8	18.11	17.6	12	22	14
	30	MXL019		5·8	19.4	18.9	14	25	16
		MXL025		5
				6.35
				8
		MXL037		8
	32	MXL025		5	20.7	20.19	14	25	16
	36			5	23.29	22.78	16	28	18
				6
		MXL037		8
		MXL050		5
		MXL025		8
	38	MXL037		8	24.58	24.07	16	28	18
	40	MXL019		5	25.87	25.36	18	30	20
		MXL025		5·6·8·10
		MXL037		6·6.35·8
	48	MXL025		5	31.05	30.54	22	35	25
	50			5	32.34	31.84	22	35	25
	60			10	38.81	38.3	28	44	32

Part Number			Pulley Shape	Shaft Hole Specifications N Bore Dia.d	P.D.	O.D.	D	F	E
Type	Number of Teeth	Applicable Belt
C－ATP	36	MXL050	B	8	23.29	22.78	16	28	18
		MXL025		8
	44	MXL037		12	28.46	27.95	20	32	23
	48			8·10	31.05	30.54	22	35	25

Part Number			Pulley Shape	Shaft Hole Specifications P Bore Dia.d	P.D.	O.D.	D	F	E
Type	Number of Teeth	Applicable Belt
C－ATP	14	MXL019	K	4	9.06	8.55	12	12	6
		MXL025		4
	15	MXL019		4	9.7	9.19	12	12	6
		MXL025		4
	16	MXL019		3·4·5	10.35	9.84	14	14	8
		MXL025		4
				5
		MXL037		5
		MXL050		5
	18	MXL019		5	11.64	11.14	14	14	8
		MXL025		5
		MXL037		5
	19			5	12.29	11.78	14	14	8
		MXL025		4·5

Detailed specifications are available on the official website

Product Features

■Usage difference between economy series timing pulleys and MISUMI standard product / Example of customer use

	Economy series Timing Pulleys	MISUMI Existing Products
Example of Use
Precautions	Generally used in reciprocating and conveyance mechanisms that require medium positioning accuracy	Generally used in mechanisms that frequently rotate forwardly and reversely and have requirements on positioning accuracy and backlash.
Repetitive positioning accuracy (reference value)	Medium precision (±0.1)	High precision (±0.05)

■More Convenient On-site Assembly
·MISUMI Economy series timing pulley is chamfered at the shaft bore and threaded hole for easy installation, reducing assembly time by 27% compared to the timing pulley not chamfered.

MISUMI Timing Pulley Assembly Time

* The values above are averages of test data and may vary individually.

■Longer Timing Belt Life
·MISUMI Economy series timing pulley, with deburring treatment at the threaded hole, is not easy to wear the timing belt, and the price is cheap while increasing the lifetime of the timing belt.

Belt condition after the test of timing belt pulley without chamfer on the threaded hole:
there are obvious wear marks left by the pulley tooth threaded hole on the belt tooth surface.
Photo of Belt Wear

[Test conditions]
Belt series: S5M
Belt width: 150mm
Number of teeth of drive side pulley: 20
Number of teeth of driven side pulley: 60
Speed: 3000 rpm
Tension (N): 160N
Test time: 24 H

* Problems of generic products on the market

Precautions

There may be no surface treatment in the shaft hole.

The positions of keyway and tooth are not fixed.

Example of Use

Example drawing of a workpiece reversal transfer mechanism designed using MISUMI timing pulley

■Mechanism name
Workpiece Reversal Transfer Mechanism

■ Mechanism function
The workpiece moving on the conveyor belt rotates 90 degrees and then transfers to the next process.
At this time, the clamping mechanism rotates 180 degrees and does not change the direction of the workpiece relative to the conveying direction at the same time during transfer.

■Role of the timing pulley
The transmission of the timing pulley and the timing belt changes the placement direction of the workpiece while transferring the workpiece. (Applicable to S specification and GT specification timing pulleys)

For details, please click Workpiece Reversal Transfer Mechanism.

Usage Method

Usage Method Example Drawing	Usage Method of Timing Wheel and Timing Belt
	①Driving The driven wheel is driven by the driving wheel for transmission
	②Linear driving Reciprocating motion is carried out through the self-end timing toothed belt.

Usage Method Example Drawing	Usage Method of Timing Wheel and Timing Belt
	③Conveyance Plates are conveyed by two timing toothed belts
	④Traction transmission Workpieces are clamped and transmitted by the belt

Timing Pulleys MXL, suitable for MISUMI Standard Timing Belts and Economy Series Timing Belts.

Application Industries

Semiconductor	Automotive	Smart Phones

Medical	Electronic & Electrical	Robotics

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-ATP24MXL025-B-P6

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Type	Belt Width Used (mm)	Number of Teeth (T)	Pulley Shape	Material	Belt Width Used(Inch) (Inch)	Timing Pulley / Idler	Shaft Bore Dia. d (mm)	Shaft Hole Shape	Number of Teeth	Operating Belt Width (inch)
	₹ 697.00	1 Piece(s)		Same day	10	Timing Pulleys	6.4	24	Shape B	[Aluminum] Aluminum Alloy	0.25	Pulleys	6	P	-	-

Basic Information

Belt Type	MXL	Surface Treatment	Clear Anodize

Please check the type/dimensions/specifications of the part C-ATP24MXL025-B-P6 in the Timing Pulleys MXL series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Why does the flange drop during use of a timing pulley?: Answer: The function of the flange is to prevent production accidents caused by deviation and drop of the timing belt. Therefore, the flange drops mainly because it is squeezed off by the timing belt that has deviated for a long time. We recommend that the customer regularly check the condition of the timing belt of the equipment to avoid its deviation.
Question: Why does the timing pulley has no threaded hole?: Answer: If you have requirements for fixing screws, we recommend that you choose a timing pulley with the shaft hole specification P (round hole + threaded hole) or N·C (keyway hole + threaded hole).
Question: What should be done if there is jitter during use of a timing belt?: Answer: Readjust the tension of the timing pulley. Generally, the belt runs unstably due to excessive shaft spacing and insufficient tension.
Question: Why cannot be the threaded hole of a MISUMI aluminum timing pulley locked tightly?: Answer: As the aluminum material is relatively soft, slippage may occur if the tightening force is too large during locking. We recommend that the customer stops tightening once an obstruction is felt.
Question: How to fix a timing pulley when the shaft hole specification is H (round hole)?: Answer: Generally, H (round hole) can be used only after additional processing. If you need a product that can be directly fixed and used, please choose MISUMI P (round hole + threaded hole) or N (keyway hole + threaded hole) specifications.
Question: What does the number in the timing pulley S2M, S3M, P2M, P3M, T5, T10, 2GT, 3GT, etc. mean?: Answer: It mainly represents the tooth pitch of the belt, that is, the distance between two adjacent teeth. They are also the tooth profile models in the timing belt industry.
Question: How to choose a timing belt after selecting a timing pulley?: Answer: First, the series must be matched. For example, the timing belts of S2M, S3M, and S5M can only match the timing pulleys of S2M, S3M, and S5M. Then, select the timing belt with an width corresponding to the ones indicated in the timing pulley specifications. Finally, select the needed perimeter.
Question: What does the number in the timing pulley S2M, S3M, P2M, P3M, T5, T10, 2GT, 3GT, etc. mean?: Answer: It mainly represents the tooth pitch of the belt, that is, the distance between two adjacent teeth. They are also the tooth profile models in the timing belt industry.

Check other FAQ (5 items) Hide

Product variants

Part Number
C-ATP15MXL025-K-P4
C-ATP16MXL019-K-P3
C-ATP16MXL019-K-P4
C-ATP24MXL037-A-H5
C-ATP24MXL037-B-P5
C-ATP24MXL037-B-P6.35

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Type	Belt Width Used (mm)	Number of Teeth (T)	Pulley Shape	Material	Belt Width Used(Inch) (Inch)	Timing Pulley / Idler	Shaft Bore Dia. d (mm)	Shaft Hole Shape	Number of Teeth	Operating Belt Width (inch)
₹ 577.00	1 Piece(s)		Same day Stock	10	Timing Pulleys	6.4	15	Shape K	[Aluminum] Aluminum Alloy	0.25	Pulleys	4	P	-	-
₹ 4,477.00	1 Piece(s)	Available	7 Day(s)	10	-	-	-	-	-	-	-	-	-	-	-
₹ 4,477.00	1 Piece(s)	Available	7 Day(s)	10	-	-	-	-	-	-	-	-	-	-	-
₹ 4,429.00	1 Piece(s)	Available	7 Day(s)	10	-	-	-	-	-	-	-	-	-	-	-
₹ 697.00	1 Piece(s)	Available	Same day Stock	10	Timing Pulleys	9.5	24	Shape B	[Aluminum] Aluminum Alloy	0.37	Pulleys	5	P	-	-
₹ 4,478.00	1 Piece(s)	Available	7 Day(s)	10	-	-	-	-	-	-	-	-	-	-	-

Flat-belt idlers, Width (T), 6 to 32 mm	Flat Belts For General Use	High Torque Timing Pulleys S2M Type

Representative model: HBG15-6	Representative model: HBLT350-4.23	Representative model: HTPA48S2M040-B-N10
Advantages: short delivery time, multiple types	Advantage: custom size	Advantages: short delivery time, multiple types

Search by Category / Brand

Search by Category

How can we improve?