Will the positioning pin rust?

Products without surface treatment will rust. It is recommended to regularly apply antirust oil for maintenance or choose products with surface treatment (no-electro nickel plated), which can prevent rust in normal atmospheric environments. No-electro nickel plated surface can effectively prevent rust.

What tools are suitable for measurement of positioning pin outer diameter?

If the outer diameter tolerance of the positioning pin is within 0.02mm, common vernier calipers and other measuring tools with general accuracy are not suitable. It is recommended to use a high accuracy external plug gauge or an internal micrometer for measurement.

Will the outer diameter of the positioning pin become smaller after installation?

It will become smaller, and m6 will shrink more than p6 after installation, so please pay attention during hole machining. For detailed change values, please refer to the precautions: change in inner diameter of the fixture bushing during press-fit.

What are the options for positioning pin outer diameter tolerance?

Optional tolerances for the outer diameter of positioning pin: m6, p6, m7, g7. Basically it can meet the needs of installation and positioning under general conditions.

What fixture bushings are commonly used together with positioning pins?

The fixture bushing is of basic shape, which is usually suitable for supporting positioning pins, checking insertion pins for fixtures, etc.

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-JPQD4-5

type Insertion Guide Tip Shape Locating Side Outer Dia. P (Ø) Mounting Side Outer Dia. D CAD Days to Ship

Specification/Dimensions

type
- C-JPQB
- C-JPQD
Clear
Insertion Guide Tip Shape
- Round
- Diamond
Clear
Locating Side Outer Dia. P (Ø)(mm)
3

4

5

6

8

10

12
Clear
Mounting Side Outer Dia. D(mm)
2

3

4

5

6

8

10
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Large Head Locating Pins - Spherical (C-JPQD4-5)

Volume Discount

Check FAQ of this product (5 items)

Brand :

MiSUMi Economy

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

- Large Head Locating Pins – Spherical tip type, C-JPQB / C-JPQD series from MISUMI.
- Standard type with spherical head. Rod diameter tolerance that can be specified for the press-fit part and lead-in part: m6, p6.
- The mounting method is press-fit type, which is simple and convenient.
- Optional Material: Iron (SKS3); Stainless Steel (SUS304, SUS440C), suitable for positioning of a variety of workpieces.
- SUS304 Material, effectively ensuring anti-rust.
- The lead-in part of the sphere can make the workpiece lead in by sliding sideways, without damage.

Economy Spherical Locating Pin

Spherical TipAnti-RustSmooth Positioning

- Standard type with spherical head for smooth positioning

- Press-fit mounting simplifies the installation process

- Made from SKS3 or SUS304 for durability

- Ensures anti-rust performance with SUS304 material

- Spherical lead-in part protects workpiece from damage

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

The positioning Locating Pins is used for the spatial positioning in the directions of X and Y axes, mainly using the workpiece hole as the positioning benchmark or used in conjunction with bushings, in which the large head spherical type is easy to install, and the spherical part ensures smooth positioning and protects the workpiece on the matching side from damage.

Dimensional Drawing

Specifications Overview

■Material Specification Table

Material No.	Type	Locating Pins Status	Material	Hardness
	m6
①	C-JPQB	Round	Equivalent to SKS3	60～63HRC
②	C-JPQD	Polygonal type

Specification Table

		Part Number	-	P
		C-JPQB6	-	8

■ Dimension Specification Table

Part number			P Selection							L	B	C	(W)
Type	D	D tolerance
Type	D	m6
<Round type> C-JPQB <Polygonal type> C-JPQD	2	+0.008 +0.002	3							4	3	0.5	1.2
	3	+0.008 +0.002		4	5					5	5	0.5	1.5
	4	+0.012 +0.004			5	6				5	6	1	1.8
	5					6	8			10	6		2.2
	6						8	10		10	8		3
	8	+0.015 +0.006						10	12	15	8	1.5	3.5
	10	+0.015 +0.006							12	15	10	2	4

Product Features

Locating Pins Feature 1: Standard type with spherical head. Rod diameter tolerance that can be specified for the press-fit part and lead-in part: m6, p6.
Locating Pins Feature 2: The mounting method is press-fit type, which is simple and convenient.
Locating Pins Feature 3: Optional Material: Iron (SKS3); Stainless Steel (SUS304, SUS440C), suitable for positioning of a variety of workpieces.
Locating Pins Feature 4: SUS304 Material, effectively ensuring antirust.
Locating Pins Feature 5: The lead-in part of the sphere can make the workpiece lead in by sliding sideways, without damage.

Example of Use

Example of using bushing for positioning pin and example of fixture

Application Industries

Lithium battery	Semiconductor	Medical

Smart phone	Electronic & Electrical Appliances	Robotics

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-JPQD4-5

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Insertion Guide Tip Shape	Locating Side Outer Dia. P (Ø) (mm)	Mounting Side Outer Dia. D (mm)
	₹ 316.00	1 Piece(s)	Available	Same day	10	Diamond	5	4

Basic Information

Basic Shape	Large Head	Insertion Guide Tip Type	Spherical	Insertion Guide Specifications	Not Provided
Mounting Side Shape	Straight (Press-Fit)	Surface Treatment	Not Provided	Heat Treatment	Directly Quenching
Material	SKS3 Equivalent	Locating Side O.D. Tolerance	-0.01/-0.02	Mounting Side Tolerance	m6
Dimension Configurable Type	P Fixed

Please check the type/dimensions/specifications of the part C-JPQD4-5 in the Large Head Locating Pins - Spherical series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Will the positioning pin rust?: Answer: Products without surface treatment will rust. It is recommended to regularly apply antirust oil for maintenance or choose products with surface treatment (no-electro nickel plated), which can prevent rust in normal atmospheric environments. No-electro nickel plated surface can effectively prevent rust.
Question: What tools are suitable for measurement of positioning pin outer diameter?: Answer: If the outer diameter tolerance of the positioning pin is within 0.02mm, common vernier calipers and other measuring tools with general accuracy are not suitable. It is recommended to use a high accuracy external plug gauge or an internal micrometer for measurement.
Question: Will the outer diameter of the positioning pin become smaller after installation?: Answer: It will become smaller, and m6 will shrink more than p6 after installation, so please pay attention during hole machining. For detailed change values, please refer to the precautions: change in inner diameter of the fixture bushing during press-fit.
Question: What are the options for positioning pin outer diameter tolerance?: Answer: Optional tolerances for the outer diameter of positioning pin: m6, p6, m7, g7. Basically it can meet the needs of installation and positioning under general conditions.
Question: What fixture bushings are commonly used together with positioning pins?: Answer: The fixture bushing is of basic shape, which is usually suitable for supporting positioning pins, checking insertion pins for fixtures, etc.

Check other FAQ (2 items) Hide

Product variants

Part Number
C-JPQB3-5
C-JPQB4-5
C-JPQB4-6
C-JPQD4-6
C-JPQD5-6
C-JPQD5-8

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Insertion Guide Tip Shape	Locating Side Outer Dia. P (Ø) (mm)	Mounting Side Outer Dia. D (mm)
₹ 247.00	1 Piece(s)	Available	Same day Stock	10	Round	5	3
₹ 254.00	1 Piece(s)	Available	Same day Stock	10	Round	5	4
₹ 255.00	1 Piece(s)	Available	Same day Stock	10	Round	6	4
₹ 317.00	1 Piece(s)	Available	Same day Stock	10	Diamond	6	4
₹ 313.00	1 Piece(s)	Available	Same day Stock	10	Diamond	6	5
₹ 313.00	1 Piece(s)	Available	Same day Stock	10	Diamond	8	5

Search by Category / Brand

Search by Category

How can we improve?