Flat Belts For General Use

A flat belt, Conveyor Belt is a belt with a rectangular cross-section. Depending on material features, number of layers, color, and surface shape, it can transfer workpieces such as food, electronic parts, and corrugated cardboards, and is widely used in various fields and industries.

Type	Material		Color	Surface Shape	Number of Layers	Thickness mm	Minimum pulley diameter Φmm	Allowable tension N/mm	Unit weight kg/㎡	Coefficient of friction (reference value for ground steel)		Knife edge	Continuous Operating Temperature °C
	Surface	Rear								Surface	Rear
CFBUG	Polyurethane (PU)	Polyester canvas	Green	Glossy surface	1	0.9	10	4	0.9	0.4	0.1	R4	-20~80
CFBUM				Matt surface	1	0.9	10	4	0.9	0.4	0.1	R4	-20~80
CFBUW			White		1	0.9	10	4	0.9	0.4	0.1	R4	-20~80
CFBUWH					1	1.1	10	4	1.2	0.4	0.1	R4	-20~80
CFBUGD			Green		2	1.5	30	6	1.7	0.4	0.1	-	-20~80
CFBUBD			Black		2	1.5	30	6	1.7	0.4	0.1	-	-20~80
CFBVG	Polyvinyl Chloride (PVC)	Polyester canvas	Green	Glossy surface	1	1.0	10	4	1.1	0.5	0.2	R5	-5~80
CFBVW			White		1	1.0	10	4	1.1	0.5	0.2	R5	-5~80
CFBVGD			Green		2	2.0	30	6	2.3	0.5	0.2	-	-5~80
CFBVWD			White	Matt surface	2	2.0	30	6	2.3	1.0	0.2	-	-5~80

The permanent stretch rate of the Conveyor Belt is 1% relative to the total length. (Reference value)
At the time of shipment, fitting processing has been performed on the ribbon Conveyor Belt.
Set the inner diameter as the circumference length.
Please select the pulley model after confirming the width tolerance between the pulley and the idler.
 

Please order after selecting part number and parameters according to the selection steps to .

		Part Number Type		-	Belt Width W (mm)		-	Circumference Length L (m)
		CFBUG		-	350		-	4.23

 

Part Number of Conveyor Belt		Circumference Length Ⅼ(m)
Type of Conveyor Belt	Belt Width W (mm) Can be specified down to 1mm increments	Can be specified down to 0.01m increments
CFBUG	10~500	0.70~20.00
CFBUM
CFBUW
CFBUWH
CFBUGD
CFBUBD
CFBVG
CFBVW
CFBVGD
CFBVWD

At the time of shipment, fitting processing has been performed on the ribbon belt.

Features 1: complete specifications, widely used, available in a variety of colors and surface shapes
For general use: suitable for general conveying purposes of food packaging, cardboard boxes, metal, and plastic, etc.
For electronic parts: anti-static specifications, suitable for the transmission of anti-static electronic parts. The surface resistivity value is 10⁶～10⁸Ω.
For sliding: canvas with sliding performance in longitudinal direction is used to make the conveying objects stay and be arranged above the Conveyor Belt.
For conveying bulk materials: The surface is of textured shape, which can be used in horizontal transportation of bulk objects.

For general use

For general use

For general use

For electronic parts

For sliding

For sliding

For conveying bulk materials

For conveying bulk materials

Feature 2: Can prevent both sides of the belt from being raised
For 1 layer of flat belt, the back is made of weaving with stronger rigidity to effectively prevent the belt from being raised on both sides.

Products circulating on the market *	MISUMI Economy series

* Problems of products circulating on the market.

Feature 3: more layers and types are available

Urethane coating, Urethane impregnated canvas is 1 layer Applicable motor power reference value: 40W		Urethane coating, Urethane impregnated canvas is 2 layers Applicable motor power reference value: 40W to 200W

The results of MISUMI Conveyor Belt installation test are for reference only.

■ Performance attribute reference

Part Number	Chemical resistance of covering layer	Tolerance to animal and vegetable oils	Flame Retardance	Water and heat resistance	Static resistance
Type
CFBUG	〇	〇
CFBUM	〇	〇
CFBUW	〇	〇
CFBUWH	〇	〇
CFBUGD	〇	〇
CFBUBD	〇	〇
CFBVG	〇			〇
CFBVW	〇			〇
CFBVGD	〇			〇
CFBVWD	〇			〇

Excellent Applicable 〇 May be corroded  Not applicable
Not suitable for unpackaged food transportation.

■ Conveyor Belt appearance list

■ Conveyor Belt, Flat belt tension adjustment
The suitable tension force of the flat belt depends on the structure of the conveyor, material, the weight of the goods, etc., so it can not be determined as a few percent.
Please do not over-tension as it is permanently tensioned. Please refer to the following method for adjusting method.
① Select a length of 1000mm and draw a mark on an inconspicuous part of the Conveyor Belt.


② Slowly tension the Conveyor Belt until the marking line reaches 1002mm.


③ Drive the Conveyor Belt in this state and confirm that the flat belt is not slipping. (If the flat belt deflects, then adjust it)
Carry out the transmission test after confirming no problems. If the transmission is smooth, you can continue to use the belt.
If the flat belt slips after the item is put on, perform Step ④.
④ When the Conveyor Belt slips, please tighten the flat belt slightly. Every time you need to confirm the slip until the flat belt does not slip.
Adjust the deviation and carry out the transmission test. Confirm smooth transmission before use.
⑤ It is recommended to check the tension state regularly.

■ Simple selection steps for Conveyor Belt
① Determine the necessary conditions for selection. (Maximum total weight of workpiece, pulley diameter, transmission power, etc.)
② Calculate the stress borne by the Conveyor Belt.
③ Choose the Conveyor Belt whose allowable stress is greater than the stress calculated in ②.
④ Confirm the oil resistance and chemical resistance of the belt, and confirm the sliding properties based on the coefficient of friction.
⑤ Determine the belt.
 

■ Packaging, cardboard boxes, metal, plastic and other general conveying purposes
Equipment name: parallel (same direction) Conveyor Belt transfer device
Intended use: move the workpiece between parallel conveyor belts, and make it go forward in the same direction