Will the fixture bushing rust?

Products without surface treatment will rust. It is recommended to regularly apply antirust oil for maintenance or choose products with surface treatment (no-electro nickel plated), which can prevent rust in normal atmospheric environments. No-electro nickel plated surface can effectively prevent rust.

What tools are suitable for measuring the inner diameter of the fixture bushing?

If the inner diameter tolerance of the fixture bushing is within 0.02mm, common vernier calipers and other measuring tools with general accuracy are not suitable. It is recommended to use a high accuracy plug gauge or an internal micrometer for measurement.

Will the inner diameter of the fixture bushing become smaller after installation?

It will become smaller, and m6 will shrink more than p6 after installation, so please pay attention during hole machining. For detailed change values, please refer to the precautions: change in inner diameter of the fixture bushing during press-fit.

What are the options for fixture bushing outer diameter tolerance?

Optional tolerances for the outer diameter of fixture bushing: m6, p6, m7, g7. Basically it can meet the needs of installation and positioning under general conditions.

What positioning pins are commonly used together with fixture bushings?

The fixture bushing is of basic shape, which is usually suitable for supporting positioning pins, checking insertion pins for fixtures, etc.

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-JBHM6-10

type Inner Diameter Outer Diameter Length L CAD Days to Ship

Specification/Dimensions

type
- C-JBHM
Clear
Inner Diameter(mm)
4

5

6

8

10

12
Clear
Outer Diameter(mm)
8

10

12

15

18
Clear
Length L(mm)
5

6

8

10

12

15
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Bushings For Locating Pins - Shouldered, Press Fit Easy Mounting (C-JBHM6-10)

Volume Discount

Check FAQ of this product (5 items)

Brand :

MiSUMi Economy

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Overview of Bushings for Fixtures

The economy series Bushings for Fixtures is a mechanical positioning part that is used in conjunction with a positioning pin to achieve a guiding effect. The shouldered press-fit type is widely used, and the shoulder contacts the workpiece,effectively controlling the installation position.And it can effectively prevent the rapid wear of the workpiece. It is an economy series product from MISUMI.

Product Feature of Bushings for Fixtures

Features and usage outline of Bushings for Fixtures product Jig Bushings Shoulder Standard

Feature 1: Fixture bushing Shouldered press-fit type can support the body through the shoulder, and is suitable for applications where it is difficult to adjust the hole depth, press-fit installation, outer diameter press-fit dimensiontolerance: M7.
Feature 2: Bushings for Fixtures low cost and stock models can be shipped on the same day.
Feature 3: Bushings for Fixtures auxiliary line can be used for reference during press-fit installation to ensure smooth bushing installation.
Feature 4: material: bearing steel (SUJ2).

Dimensional Drawing of Bushings for Fixtures

Fixture bushing dimensional drawing and diagram

The inner diameter tolerance of bushing is high. If a vernier caliper is used for detection, the measurement result will be too small. It is recommended to use ahigh-precision measuring tool (internal micrometer or plug gauge, etc.) for detection.

Specifications Overview of Bushings for Fixtures

■ Material Specification Table

Type of Bushings for Fixtures	Material	Surface Treatment	Hardness
m7
C-JBHM	Equivalent to SUJ2	-	58HRC～

If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating on other pages.
Bushings for Fixtures

Example Use of Bushings for Fixtures

Example of using bushing for positioning pin and example of fixture

Example introduction: Bushings for Fixtures positioning pin in pick and place mechanism
Design summary:
① An example of using a swing cylinder to achieve linear and rotary motion through pneumatic drive, and moving a small substrate through a suction cup.
② In the case of a long pin, if the air vent is not provided, the pin and bushing are not easy to pull out. It is necessary to provide a air vent on the bushing side or the positioning pin side.
Intended use of Bushings for Fixtures:
The axial structure of the swing cylinder can ensure positioning accuracy while saving space through the coordination of positioning pins/shouldered bushings.

Application Industries of Bushings for Fixtures

Lithium battery	Smart phone	Electronic & Electrical Appliances

Semiconductor	Medical	Food

Related Products of Bushings for Fixtures

Mounting position adjusting type Bushings for Fixtures Adhesive shouldered	Press-fit type convenient positioning Bushings for Fixtures Straight type	Mounting position adjusting type Bushings for Fixtures Adhesive straight type

Recommended model: C-JBHG6-8	Recommended model: C-JBAM10-15	Recommended model: C-JBAG10-15

Specification Table of Bushings for Fixtures

		Part Number (Type·d)	-	L
		C-JBHM5	-	8

■ Dimension Specification Table

Part Number			L Selection						D	D Tolerance	H	Wall Thickness (N)	T	R
Type of Bushings for Fixtures	d	d Tolerance								m7
Type of Bushings for Fixtures	d	F7								m7
Economy Series Shouldered Type (m7) C-JBHM	4	+0.022 +0.010	5	6					8	+0.021 +0.006	12	2	3	1
	5		5	6					10		14	2.5
	6		5	6	8	10	12	15	10		14	2
	8	+0.028 +0.013	5	6	8	10	12	15	12	+0.025 +0.007	16	2	4	2
	10	+0.028 +0.013		6	8	10	12		15		19	2.5
	12	+0.034 +0.016			8	10	12		18		22	3

Specification Table

		Part Number (Type·d)	-	L
		C-JBHM5	-	8

■ Dimension Specification Table

Part Number			L Selection						D	D Tolerance	H	Wall Thickness (N)	T	R
Type	d	d Tolerance								m7
Type	d	F7								m7
Economy Series Shouldered Type (m7) C-JBHM	4	+0.022 +0.010	5	6					8	+0.021 +0.006	12	2	3	1
	5		5	6					10		14	2.5
	6		5	6	8	10	12	15	10		14	2
	8	+0.028 +0.013	5	6	8	10	12	15	12	+0.025 +0.007	16	2	4	2
	10	+0.028 +0.013		6	8	10	12		15		19	2.5
	12	+0.034 +0.016			8	10	12		18		22	3

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-JBHM6-10

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Inner Diameter (mm)	Outer Diameter (mm)	Length L (mm)
	₹ 432.00	1 Piece(s)	Available	Same day	10	6	10	10

Basic Information

Type	Bushing	Basic Shape	Flanged	Fixing Support	Not Provided
Material	SUJ2 Equivalent	Surface Treatment	Not Provided	I.D. Shape	Circular

Please check the type/dimensions/specifications of the part C-JBHM6-10 in the Bushings For Locating Pins - Shouldered, Press Fit Easy Mounting series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Will the fixture bushing rust?: Answer: Products without surface treatment will rust. It is recommended to regularly apply antirust oil for maintenance or choose products with surface treatment (no-electro nickel plated), which can prevent rust in normal atmospheric environments. No-electro nickel plated surface can effectively prevent rust.
Question: What tools are suitable for measuring the inner diameter of the fixture bushing?: Answer: If the inner diameter tolerance of the fixture bushing is within 0.02mm, common vernier calipers and other measuring tools with general accuracy are not suitable. It is recommended to use a high accuracy plug gauge or an internal micrometer for measurement.
Question: Will the inner diameter of the fixture bushing become smaller after installation?: Answer: It will become smaller, and m6 will shrink more than p6 after installation, so please pay attention during hole machining. For detailed change values, please refer to the precautions: change in inner diameter of the fixture bushing during press-fit.
Question: What are the options for fixture bushing outer diameter tolerance?: Answer: Optional tolerances for the outer diameter of fixture bushing: m6, p6, m7, g7. Basically it can meet the needs of installation and positioning under general conditions.
Question: What positioning pins are commonly used together with fixture bushings?: Answer: The fixture bushing is of basic shape, which is usually suitable for supporting positioning pins, checking insertion pins for fixtures, etc.

Check other FAQ (2 items) Hide

Product variants

Part Number
C-JBHM10-8
C-JBHM12-10
C-JBHM12-12
C-JBHM6-12
C-JBHM6-15
C-JBHM6-5

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Inner Diameter (mm)	Outer Diameter (mm)	Length L (mm)
₹ 285.09	1 Piece(s)	Available	Same day Stock	10	10	15	8
₹ 326.93	1 Piece(s)	Available	Same day Stock	10	12	18	10
₹ 740.63	1 Piece(s)	Available	Same day Stock	10	12	18	12
₹ 382.00	1 Piece(s)	Available	Same day Stock	10	6	10	12
₹ 444.00	1 Piece(s)	Available	Same day Stock	10	6	10	15
₹ 394.00	1 Piece(s)	Available	Same day Stock	10	6	10	5

Search by Category / Brand

Search by Category

How can we improve?