Bushings For Locating Pins - Straight, Adhesive Fixation for Easy Positioning
Brand :
MISUMI
Caution
Product Description
New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now
Product Overview of Bushings for Fixtures
The Bushings for Fixtures is a mechanical positioning part that is used in conjunction with a positioning pin to achieve a guiding effect. The straight type adhesive bushing has a large adjustment margin, which can effectively control the installation position and can effectively prevent the rapid wear of the workpiece. It is an economic type product from MISUMI.
Product Feature of Bushings for Fixtures
Feature 1: Straight type adhesive Bushings for Fixtures is installed and fixed by glue, which can effectively adjust the installation position and ensure the positioning accuracy.
Feature 2: Bushings for Fixtures Economic type specifications are affordable and friendly to the users, and the stock models can be shipped on the same day.
Feature 3: Bushings for Fixtures Optional material: bearing steel (SUJ2).
Feature 4: Bushings for Fixtures the contact area between the outer diameter adhesion groove and the glue is increased, effectively enhancing the adhesion strength.
Feature 2: Bushings for Fixtures Economic type specifications are affordable and friendly to the users, and the stock models can be shipped on the same day.
Feature 3: Bushings for Fixtures Optional material: bearing steel (SUJ2).
Feature 4: Bushings for Fixtures the contact area between the outer diameter adhesion groove and the glue is increased, effectively enhancing the adhesion strength.
Dimensional Drawing of Bushings for Fixtures
The inner diameter tolerance of bushing is high. If a vernier caliper is used for detection, the measurement result will be too small. It is recommended to use ahigh-precision measuring tool (internal micrometer or plug gauge, etc.) for detection.Specifications Overview of Bushings for Fixtures
■ Material Specification Table
If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating on other pages.
The inner diameter tolerance of bushing is high. If a vernier caliper is used for detection, the measurement result will be too small. It is recommended to use ahigh-precision measuring tool (internal micrometer or plug gauge, etc.) for detection.
| Material No. | Type of Bushings for Fixtures |  Material |  Surface Treatment |  Hardness |
| g7 | ||||
| ① | C-JBAG | Equivalent to SUJ2 | - | 58HRC～ |
If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating on other pages.The inner diameter tolerance of bushing is high. If a vernier caliper is used for detection, the measurement result will be too small. It is recommended to use ahigh-precision measuring tool (internal micrometer or plug gauge, etc.) for detection.Example Use of Bushings for Fixtures
Example introduction: Bushings for Fixtures shouldered bushing for positioning pin in pick and place mechanism
Design summary:
① An example of using a swing cylinder to achieve linear and rotary motion through pneumatic drive, and moving a small substrate through a suction cup.
② In the case of a long pin, if the air vent is not provided, the pin and bushing are not easy to pull out. It is necessary to provide a air vent on the bushing side or the positioning pin side.
Intended use of Bushings for Fixtures:
The axial structure of the swing cylinder can ensure positioning accuracy while saving space through the coordination of positioning pins/shouldered bushings.
Design summary:
① An example of using a swing cylinder to achieve linear and rotary motion through pneumatic drive, and moving a small substrate through a suction cup.
② In the case of a long pin, if the air vent is not provided, the pin and bushing are not easy to pull out. It is necessary to provide a air vent on the bushing side or the positioning pin side.
Intended use of Bushings for Fixtures:
The axial structure of the swing cylinder can ensure positioning accuracy while saving space through the coordination of positioning pins/shouldered bushings.
Application Industries of Bushings for Fixtures
| Lithium battery | Smart phone | Electronic & Electrical Appliances | ||
 |  |  | ||
| Semiconductor | Medical | Food | ||
 |  |  |
Related Products of Bushings for Fixtures
| Mounting position adjusting type Bushings for Fixtures Adhesive shouldered | Press-fit type convenient positioning Bushings for Fixtures Straight type | Press-fit type convenient positioning Bushings for Fixtures Shouldered | ||
 |  |  | ||
| Recommended model: C-JBHG6-8 | Recommended model: C-JBAM10-15 | Recommended model: C-JBHM6-8 |
Specification Table of Bushings for Fixtures
 | Part Number ( Type· d) | - |  L | |
| C-JBAG6 | - | 8 |
■ Dimension Specification Table
| Part Number | L Selection | D | D Tolerance | Wall Thickness (N) | R | |||||||||||
| Type Bushings for Fixtures | d | d Tolerance | g7 | |||||||||||||
| H7 | ||||||||||||||||
| Economic Straight Type (g7) C-JBAG | 4 | +0.012 0 | 5 | 6 | 8 | 8 | -0.005 -0.020 | 2 | 1 | |||||||
| 5 | 6 | 8 | 10 | 10 | 2.5 | |||||||||||
| 6 | 5 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 2 | |||||||
| 8 | +0.015 0 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 12 | -0.006 -0.024 | 2 | 2 | |||
| 10 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 15 | 2.5 | |||||||
| 12 | +0.018 0 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 18 | 3 | ||||||