Ball Bearings C3 Clearance

Brand :

MISUMI

Caution

Product Description

New at MISUMI? Get upto ₹10,000 Discount* on Your First Order. Click to Register Now

Ball Bearings C3 Clearance
Ball bearings with C3 clearance is commonly used in applications where there is a need for the bearing to accommodate thermal expansion or contraction. These bearings are available in various sizes to choose from.
[Feature]
•Material: Steel/SUJ2
•Bearing Size: Metric
•Inner Diameter Min / Max (mm.) : 10 / 50
•Outer Diameter Min / Max (mm.) : 26 / 110
•Width Min / Max (mm.) : 8 / 27
•Tolerance Class: JIS Class 0
•Bearing Type : Closed (Double Shielded (ZZ))
•Load Direction : Radial
[Application]
It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc.

Economy Ball Bearing C3

C3 Clearance Ball Bearings Affordable Price Precision Rotary Motion Components

- Ultra-low price meets industry vibration class Z1 requirements

- Available in various sizes with inner diameters within specified range.

- Double shielded design for enhanced dust resistance

- Precision class 0 for reliable performance

- Ideal for applications requiring thermal expansion accommodation

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product of Ball Bearings Overview

・ Light load, medium · low speed, special for medium precision rotation, realizing ultra-low price.
・ It is made of industry standard Ball Bearings steel with high surface hardness and wear resistance.
・ The vibration class of the product is above Z1

Product of Ball Bearings Feature

・ The interface radius of the channel located on the inner and outer ring is slightly larger than the radius of the sphere, in arc shape. Mainly can bear radial load.
・ In addition to the open type bearings, there are Ball Bearings with steel dust cover, bearings with contact rubber seal packing and bearings with non-contact rubber seal packing, or bearings with stop ring on the outer diameter of outer ring.
・ Ball bearings with dust cover or seal packing are sealed with proper amount of high-quality grease. Deep groove ball bearings generally adopt steel plate stamped cage, which has low friction torque and accuracy grade of 0.

Dimensional Ball Bearings Drawing

Product Dimensional Drawing
Deep groove ball bearings Double shielded C3 clearance

Example of Ball Bearings Use

Motor

Gear unit

Machine tool
3 Machine tool

Precautions for Using Ball Bearings

When the precision of the shaft and Ball Bearings housing is poor, the bearing will be affected, and its due performance will not be exerted. For example, the poor precision of the mounting part with the bearing will cause relative inclination of the inner and outer rings. At this time, besides the bearing load, the edge load will be increased additionally, which will shorten the fatigue life of the bearing, and even more seriously, it will lead to damage such as cage breakage and sticking.

Please use the following special mounting tool for installation and removal

Bearing heater

Proper installation of the bearing heater can guarantee a long life of the Ball Bearings.
Rolling Ball Bearings are reliable mechanical components with long service life if they are installed and maintained correctly.
After the induction heater is used for heating, the bearing expands outward in the cylindrical direction, which can avoid the damage during installation. Induction heater is one of the most scientific heating methods, which does not need preheating, and can be heated to 110℃ in a few seconds or minutes depending on the weight of bearings, without damaging the prior lubrication

Bearing puller

When the installation state of the Ball Bearings is in the following situations, the special puller can be used for disassembly.
(a) Shaft shape: cylindrical shaft, Inner diameter shape of bearing inner ring: cylindrical hole.
(b) Shaft shape: cylindrical shaft, inner diameter shape of bearing inner ring with tight bushing: tapered hole.
(c) Shaft shape: tapered shaft, Inner diameter shape of bearing inner ring: tapered hole. In either state, the lock nut of the shaft (or the lock nut of the tight bushing) must be released during disassembly, and the lock nut must be placed in a loose state.