What is the difference between ball bearing and roller bearing?

The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.

What is the classification of bearings according to the shape of rolling elements?

Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.

What is the classification of bearings according to load direction?

Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.

What standard does the vibration class of this bearing meet?

The vibration class of the bearing is above Z1

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-E6802

type Inner Dia. d Outer Dia. D Width B (or T) Basic Load Rating Cr (Dynamic) CAD Days to Ship

Specification/Dimensions

type
- C-E6□□□
Clear
Inner Dia. d(Ø)
10

12

15

17

20

25

30

35

40

45

50
Clear
Outer Dia. D(Ø)
18

19

21

22

23

24

26

27

28

30

32

35

37

40

42

44

47

50

52

55

58

62

65

68

72

75

80

85

90
Clear
Width B (or T)(mm)
4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20
Clear
Basic Load Rating Cr (Dynamic)(N)
926

937

1000

1091

1143

1402

1716

1866

1915

2073

2233

2516

2580

2695

2886

4015

4303

4321

4538

4550

4588

4729

4923

5100

5600

6000

6187

6381

6610

6800

7001

7242

7650

9400

9550

10100

10900

12800

13200

14000

14100

14540

16000

16800

19500

20900

25700

29100

31500

35000
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

15 Day(s) or Less

19 Day(s) or Less
Clear

Specify Alterations

Ball Bearings Open Type (C-E6802)

Name: Ball Bearings Open Type
Brand: MISUMI
Price: 102 INR
Availability: InStock

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (4 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Economy Open Type Ball Bearing

Basic Load RatingRotational SpeedPrecision Class

- Width Range: Bearings are available with widths between 4mm and 19mm.

- Basic Load Rating (Dynamic): Supports loads within specified range.

- Precision Class: Manufactured to JIS Class 0, ensuring medium precision for standard applications.

- Rotational Speed: Capable of handling rotational speeds up to 8,000 rpm, suitable for low to medium speed operations.

- Material: Made from SUJ2 equivalent steel, offering high surface hardness and wear resistance.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product of Ball Bearings Overview

・ Light load, medium low speed, special for medium precision rotation, realizing ultra-low price.
・ It is made of industry standard Ball Bearings steel with high surface hardness and wear resistance.
・ The vibration class of the product Ball Bearings is above Z1

Product of Ball Bearings Feature

・ The interface radius of the channel located on the inner and outer ring is slightly larger than the radius of the sphere, in arc shape. Mainly can bear radial load.
・ In addition to the open type Ball Bearings, there are bearings with steel dust cover, bearings with contact rubber seal packing and bearings with non-contact rubber seal packing, or bearings with stop ring on the outer diameter of outer ring.
・ Ball Bearings with dust cover or seal packing are sealed with the proper amount of high-quality grease. Deep groove ball bearings generally adopt steel plate stamped cage, which has low friction torque and accuracy grade of 0.

Dimensional Ball Bearings Drawing

Product Dimensional Drawing
Deep groove ball bearing Open type

Example of Ball Bearings Use

Ball Bearings Motor
1 Motor

Ball Bearings Gear unit
2 Gear unit

Ball Bearings Machine tool
3 Machine tool

Precautions Ball Bearings

When the precision of the shaft and Ball Bearings housing is poor, the bearing will be affected, and its due performance will not be exerted. For example, the poor precision of the mounting part with the bearing will cause relative inclination of the inner and outer rings. At this time, besides the bearing load, the edge load will be increased additionally, which will shorten the fatigue life of the Ball Bearings, and even more seriously, it will lead to damage such as cage breakage and sticking.

Please use the following special mounting tool for installation and removal

Ball Bearings heater
Bearing heater

Proper installation of the bearing heater can guarantee a long life of the bearing.
Rolling Ball Bearings are reliable mechanical components with long service life if they are installed and maintained correctly.
After the induction heater is used for heating, the bearing expands outward in the cylindrical direction, which can avoid the damage during installation. Induction heater is one of the most scientific heating methods, which does not need preheating, and can be heated to 110℃ in a few seconds or minutes depending on the weight of bearings, without damaging the prior lubrication

Ball Bearings puller
Bearing puller

When the installation state of the Ball Bearings is in the following situations, the special puller can be used for disassembly.
(a) Shaft shape: cylindrical shaft, Inner diameter shape of bearing inner ring: cylindrical hole.
(b) Shaft shape: cylindrical shaft, inner diameter shape of bearing inner ring with tight bushing: tapered hole.
(c) Shaft shape: tapered shaft, Inner diameter shape of bearing inner ring: tapered hole. In either state, the lock nut of the shaft (or the lock nut of the tight bushing) must be released during disassembly, and the lock nut must be placed in a loose state.

Specification Table

Key points of economy series parts confirmation ①

Inner Diameter d (mm)		Clearance of MISUMI quality products (μm)		Clearance of economy series products (μm)
or More	or Less	Minimum	Max.	Minimum	Max.
Less than 10		5	10	7	15

Part Number	d	D	B	r (min.)	Key points of economy series parts confirmation ② Basic Rated Load		Allowable Rotational Speed rpm (Reference)	Mounting Dimensions				Weight (g) (Reference)
								Ds		dh (max.)	R (max.)
					Cr (Dynamic) kN	Cor (Static) kN		(min.)	(max.)	dh (max.)	R (max.)
C－E6800	10	19	5	0.3	1716	840	8000	12	12.5	17	0.3	6
C－E6900		22	6		2695	1273			13	20		10
C－E6000		26	8		4550	1970			13.5	24		18
C－E6200		30	9	0.6	5100	2390		14	16	26	0.6	32
C－E6701	12	18	4	0.2	926	530		12.4	13.86	16.7	0.2	4
C－E6801		21	5	0.3	1915	1041		14	14.5	19	0.3	7
C－E6901		24	6		2886	1466			15	22		10
C－E6001		28	8		5100	2370			16	26		22
C－E6201		32	10	0.6	6800	3050		16	17	28	0.6	37
C－E6702	15	21	4	0.2	937	582		15.4	16.86	19.7	0.2	4
C－E6802		24	5	0.3	2073	1253		17	17.5	22	0.3	9
C－E6902		28	7		4321	2259			17.5	26		15
C－E6002		32	9		5600	2830			19	30		31
C－E6202		35	11	0.6	7650	3750		19	20	31	0.6	45
C－E6703	17	23	4	0.3	1000	658		18	18.5	22	0.3	5
C－E6803		26	5		2233	1456		19	19.5	24		9
C－E6903		30	7		4588	2565			20	28		10
C－E6003		35	10		6000	3250			21	33		41
C－E6203		40	12	0.6	9550	4800		21	23	36	0.6	67
C－E6704	20	27	4	0.3	1402	729		20.4	22.36	25.5	0.3	6
C－E6804		32	7		4015	2462		22	22.5	30		18
C－E6904		37	9		6381	3682		22	24	35		40
C－E6004		42	12	0.6	9400	5000		24	26	38	0.6	68
C－E6204		47	14	1	12800	6600		25	28	42	1	107
C－E6705	25	32	4	0.3	1091	838		26	27	31	0.3	8
C－E6805		37	7		4303	2932		27	28	35		24
C－E6905		42	9		7001	4540		27	29	40		47
C－E6005		47	12	0.6	10100	5850		29	30.5	43	0.6	79
C－E6205		52	15	1	14000	7850		30	32	47	1	129
C－E6706	30	37	4	0.3	1143	947		31	32	35.5	0.3	9
C－E6806		42	7		4538	3402		32	33	40		27
C－E6906		47	9		7242	5003		32	34	45		53
C－E6006		55	13	1	13200	8300		35	37	50	1	116
C－E6206		62	16	1	19500	11300		35	39	57	1	199
C－E6707	35	44	5	0.3	1866	1635		37	38	42	0.3	15
C－E6807		47	7	0.3	4729	3821		37	38	45	0.3	32
C－E6907		55	10	0.6	10900	7818		39	40	51	0.6	88
C－E6007		62	14	1	16000	10300		40	42	57	1	151
C－E6207		72	17	1.1	25700	15300		41.5	45	65.6	1	284
C－E6708	40	50	6	0.3	2516	2233		42	43	48	0.3	23
C－E6808		52	7	0.3	4923	4178		42	43	50	0.3	35
C－E6908		62	12	0.6	13678	9968		44	45	58	0.6	132
C－E6008		68	15	1	16800	11500		45	47	63	1	190
C－E6208		80	18	1.1	29100	17900		46.5	51	73.5	1	366
C－E6709	45	55	6	0.3	2580	2397		47	48	53	0.3	25
C－E6809		58	7	0.3	6187	5381		47	47.5	56	0.3	42
C－E6909		68	12	0.6	14100	10830		49	50	64	0.6	148
C－E6009		75	16	1	20900	15200		50.8	52	69.2	1	241
C－E6209		85	19	1.1	31500	20400		52	54	78	1.1	420
C－E6810	50	65	7	0.3	6610	6090		52	52.5	63	0.3	65
C－E6910		72	12	0.6	14540	11710		54	55	68	0.6	145
C－E6010		80	16	1	21800	16600		55	57.5	75	1	261
C－E6210		90	20	1.1	35000	23200		56.5	60	83.5	1	459

kgf＝N×0.101972

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-E6802 SALE

Part Number Price Minimum Order Qty. Volume Discount Days to Ship RoHS Inner Dia. d
(Ø) Outer Dia. D
(Ø) Width B (or T)
(mm) Basic Load Rating Cr (Dynamic)
(N) Basic Load Rating Cor (Static)
(N) Weight
(g)

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)	Weight (g)
	₹ 102.00 ₹ 86.70	1 Piece(s)	Available	Same day	10	15	24	5	2073	1253	9

₹ 102.00

₹ 86.70

1 Piece(s)

Available

Same day

2073

1253

Basic Information

Raceway Ring Shape	Ball	Bearing Type	Open	Outer Ring Type	Flat
Inner/Outer Ring Material	SUJ2 Equiv.	Specifications, Environment	Standard	Precision (JIS)	Class 0
Load Direction	Radial	Rolling Element Material	SUJ2	Size Standards	Metric System
Number of Raceway Ring Rows	Single Row	Allowable Rotational Speed(rpm)	8000

Please check the type/dimensions/specifications of the part C-E6802 in the Ball Bearings Open Type series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What is the difference between ball bearing and roller bearing?: Answer: The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.
Question: What is the classification of bearings according to the shape of rolling elements?: Answer: Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.
Question: What is the classification of bearings according to load direction?: Answer: Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.
Question: What standard does the vibration class of this bearing meet?: Answer: The vibration class of the bearing is above Z1

Check other FAQ (1 items) Hide

Product variants

Part Number
C-E6003
C-E6004
C-E6005
C-E6803
C-E6804
C-E6805

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)	Weight (g)
₹ 98.00	1 Piece(s)	Available	Same day Stock	10	17	35	10	6000	3250	41
₹ 135.00	1 Piece(s)	Available	Same day Stock	10	20	42	12	9400	5000	68
₹ 152.00	1 Piece(s)	Available	Same day Stock	10	25	47	12	10100	5850	79
₹ 109.00	1 Piece(s)	Available	Same day Stock	10	17	26	5	2233	1456	9
₹ 136.00	1 Piece(s)	Available	Same day Stock	10	20	32	7	4015	2462	18
₹ 146.00	1 Piece(s)	Available	Same day Stock	10	25	37	7	4303	2932	24

Search by Category / Brand

Search by Category

How can we improve?