What is the difference between ball bearing and roller bearing?

The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.

What is the classification of bearings according to the shape of rolling elements?

Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.

What is the classification of bearings according to load direction?

Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.

What standard does the vibration class of this bearing meet?

The vibration class of the bearing is above Z1

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-E6200DDU

type Inner Dia. d Outer Dia. D Width B (or T) Basic Load Rating Cr (Dynamic) CAD Days to Ship

Specification/Dimensions

type
- C-E6□□□DDU
Clear
Inner Dia. d(Ø)
10

12

15

17

20

25

30

35

40

45

50
Clear
Outer Dia. D(Ø)
19

21

22

24

26

28

30

32

35

37

40

42

47

52

55

58

62

65

68

72

75

80

85

90

100

110
Clear
Width B (or T)(mm)
5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

23

25

27
Clear
Basic Load Rating Cr (Dynamic)(N)
1716

1915

2073

2233

2695

2886

4015

4303

4321

4538

4550

4588

4729

4923

5100

5600

6000

6187

6381

6610

6800

7001

7242

7650

8100

9400

9550

9700

10100

10900

11400

12800

13200

13600

13678

14000

14100

14540

15900

16000

16800

19500

20600

20900

21800

25700

26700

29100

31500

33500

35000

40500

53000

62000
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Ball Bearings Rubber Sealed (C-E6200DDU)

Name: Ball Bearings Rubber Sealed
Brand: MISUMI
Price: 86 INR
Availability: InStock

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (4 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Ball Bearings Rubber Sealed
Ball bearings with rubber seals are commonly used in applications where there is a need to protect the bearings from dirt, dust, and water resistant. These bearings are available in various sizes to choose from.
[Feature]
● Bearing Size Standards: Metric System
● Inner Diameter Minimum / Maximum (mm.) : 10 and 50
● Outer Diameter Minimum / Maximum (mm.) : 19 and 110
● Width Minimum / Maximum (mm.) : 5 and 27
● Precision (JIS) : Class 0
● Bearing Type : Closed (Rubber Sealed (DDU))
● Load Direction : Radial / Thrust Load or Axial Load
[Application]
It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Economy Rubber Sealed Ball Bearing

Protective SealsHigh Surface HardnessWear Resistance

- Width Range: Bearings are available in various widths.

- Material: SUJ2 equivalent for inner/outer ring and rolling elements.

- Inner Diameter (d): Ranges within specified values.

- Bearing with various outer diameter options

- Available in various widths.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product of Ball Bearings Overview

・ Light load, medium · low speed, special for medium precision rotation, realizing ultra-low price.
・ It is made of industry standard Ball Bearings steel with high surface hardness and wear resistance.
・ The vibration class of the product Ball Bearings is above Z1

Product of Ball Bearings Feature

・ The interface radius of the channel located on the inner and outer ring is slightly larger than the radius of the sphere, in arc shape. Mainly can bear radial load.
・ In addition to the open type Ball Bearings, there are bearings with steel dust cover, bearings with contact rubber seal packing and bearings with non-contact rubber seal packing, or bearings with stop ring on the outer diameter of outer ring.
・ Ball bearings with dust cover or seal packing are sealed with proper amount of high-quality grease. Deep groove Ball Bearings generally adopt steel plate stamped cage, which has low friction torque and accuracy grade of 0.

Dimensional Ball Bearings Drawing

Product Dimensional Drawing
(Economic) Small diameter ball bearing Contact rubber seal packing type

Example of Ball Bearings Use

Ball Bearings Motor
1 Motor

Ball Bearings Gear unit
2 Gear unit

Ball Bearings Machine tool
3 Machine tool

Precautions Ball Bearings

When the precision of the shaft and Ball Bearings housing is poor, the bearing will be affected, and its due performance will not be exerted. For example, the poor precision of the mounting part with the bearing will cause relative inclination of the inner and outer rings. At this time, besides the bearing load, the edge load will be increased additionally, which will shorten the fatigue life of the bearing, and even more seriously, it will lead to damage such as cage breakage and sticking.

Please use the following special mounting tool for installation and removal

Ball Bearings heater
Bearing heater

Proper installation of the Ball Bearings heater can guarantee a long life of the bearing.
Rolling bearings are reliable mechanical components with long service life if they are installed and maintained correctly.
After the induction heater is used for heating, the bearing expands outward in the cylindrical direction, which can avoid the damage during installation. Induction heater is one of the most scientific heating methods, which does not need preheating, and can be heated to 110℃ in a few seconds or minutes depending on the weight of bearings, without damaging the prior lubrication

Ball Bearings puller
Bearing puller

When the installation state of the Ball Bearings is in the following situations, the special puller can be used for disassembly.
(a) Shaft shape: cylindrical shaft, Inner diameter shape of bearing inner ring: cylindrical hole.
(b) Shaft shape: cylindrical shaft, inner diameter shape of bearing inner ring with tight bushing: tapered hole.
(c) Shaft shape: tapered shaft, Inner diameter shape of bearing inner ring: tapered hole. In either state, the lock nut of the shaft (or the lock nut of the tight bushing) must be released during disassembly, and the lock nut must be placed in a loose state.

Specification Ball Bearings Table

Key points of Ball Bearings economy series parts confirmation ①

Ball Bearings Inner Diameter d (mm)		Clearance of MISUMI quality products Ball Bearings (μm)		Clearance of economy series products Ball Bearings (μm)
or More	or Less	Minimum	Max.	Minimum	Max.
Only 10		2	13	4	18
10	18	3	18	6	23
18	24	5	20	8	25
24	30	5	20	8	25

Part Number	d	D	B	r (min.)	Key points of economy series parts confirmation ② Basic Rated Load		Allowable Rotational Speed rpm (Reference)	Mounting Dimensions				Weight (g) (Reference)
								Ds		dh (max.)	R (max.)
					Cr (Dynamic) N	Cor (Static) N		(min.)	(max.)	dh (max.)	R (max.)
C－E6800DDU	10	19	5	0.3	1716	840	8000	12	12	17	0.3	6
C－E6900DDU		22	6		2695	1273			12.5	20		10
C－E6000DDU		26	8		4550	1970			12.5	24		18
C－E6200DDU		30	9	0.6	5100	2390		14	16	26	0.6	32
C－E6300DDU		35	11	0.6	8100	3450			16.5	31	0.6	52
C－E6801DDU	12	21	5	0.3	1915	1041			14	19	0.3	7
C－E6901DDU		24	6		2886	1466			14.5	22		10
C－E6001DDU		28	8		5100	2370			15.5	26		22
C－E6201DDU		32	10	0.6	6800	3050		16	17	28	0.6	37
C－E6301DDU		37	12	1	9700	4200		17	18	32	1	60
C－E6802DDU	15	24	5	0.3	2073	1253			17	22	0.3	9
C－E6902DDU		28	7		4321	2259			17	26		15
C－E6002DDU		32	9		5600	2830			19	30		31
C－E6202DDU		35	11	0.6	7650	3750		19	20.5	31	0.6	45
C－E6302DDU		42	13	1	11400	5450		20	22.5	37	1	83
C－E6803DDU	17	26	5	0.3	2233	1456		19	19	24	0.3	9
C－E6903DDU		30	7		4588	2565			19.5	28		10
C－E6003DDU		35	10		6000	3250			21.5	33		41
C－E6203DDU		40	12	0.6	9550	4800		21	23.5	36	0.6	67
C－E6303DDU		47	14	1	13600	6650		22	25.5	42	1	113
C－E6804DDU	20	32	7	0.3	4015	2462			22	30	0.3	18
C－E6904DDU		37	9	0.3	6381	3682			24	35	0.3	40
C－E6004DDU		42	12	0.6	9400	5000		24	25.5	38	0.6	68
C－E6204DDU		47	14	1	12800	6600		25	26.5	42	1	107
C－E6304DDU		52	15	1.1	15900	7900		26.5	28	45.5	1	145
C－E6805DDU	25	37	7	0.3	4303	2932		27	27	35	0.3	24
C－E6905DDU		42	9	0.3	7001	4540		27	28.5	40	0.3	47
C－E6005DDU		47	12	0.6	10100	5850		29	30	43	0.6	79
C－E6205DDU		52	15	1	14000	7850		30	32	47	1	129
C－E6305DDU		62	17	1.1	20600	11200		31.5	36	55.5	1	235
C－E6806DDU	30	42	7	0.3	4538	3402		32	32	40	0.3	27
C－E6906DDU		47	9	0.3	7242	5003		32	34	45	0.3	53
C－E6006DDU		55	13	1	13200	8300		35	36.5	50	1	116
C－E6206DDU		62	16	1	19500	11300		35	38.5	57		199
C－E6306DDU		72	19	1.1	26700	15000		37	40	65		345
C－E6807DDU	35	47	7	0.3	4729	3821		37	38	45	0.3	32
C－E6907DDU		55	10	0.6	10900	7818		39	39	51	0.6	88
C－E6007DDU		62	14	1	16000	10300		40	41.5	57	1	151
C－E6207DDU		72	17	1.1	25700	15300		41.5	44.5	65.5	1	284
C－E6307DDU		80	21	1.5	33500	19200		43	47	72	1.5	464
C－E6808DDU	40	52	7	0.3	4923	4178		42	43	50	0.3	35
C－E6908DDU		62	12	0.6	13678	9968		44	46	58	0.6	132
C－E6008DDU		68	15	1	16800	11500		45	47.5	63	1	190
C－E6208DDU		80	18	1.1	29100	17900		46.5	50.5	73.5	1	366
C－E6308DDU		90	23	1.5	40500	24000		49	53	81	1.5	636
C－E6809DDU	45	58	7	0.3	6187	5381		47	47.5	56	0.3	42
C－E6909DDU		68	12	0.6	14100	10830		49	50	64	0.6	148
C－E6009DDU		75	16	1	20900	15200		50	53.5	70	1	241
C－E6209DDU		85	19	1.1	31500	20400		51.5	55.5	78.5	1	420
C－E6309DDU		100	25	1.5	53000	32000		54	58	91	1.5	829
C－E6810DDU	50	65	7	0.3	6610	6090		52	52.5	63	0.3	65
C－E6910DDU		72	12	0.6	14540	11710		54	55	68	0.6	145
C－E6010DDU		80	16	1	21800	16600		55	58.5	75	1	261
C－E6210DDU		90	20	1	35000	23200		56.5	60	83.5	1	459
C－E6310DDU		110	27	2	62000	38500		61	64	99	2	1060

kgf＝N×0.101972

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-E6200DDU SALE

Part Number Price Minimum Order Qty. Volume Discount Days to Ship RoHS Inner Dia. d
(Ø) Outer Dia. D
(Ø) Width B (or T)
(mm) Basic Load Rating Cr (Dynamic)
(N) Basic Load Rating Cor (Static)
(N) Weight
(g)

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)	Weight (g)
	₹ 86.00 ₹ 73.10	1 Piece(s)	Available	Same day	10	10	30	9	5100	2390	32

₹ 86.00

₹ 73.10

1 Piece(s)

Available

Same day

5100

2390

Basic Information

Raceway Ring Shape	Ball	Bearing Type	Rubber Sealed	Outer Ring Type	Flat
Inner/Outer Ring Material	SUJ2 Equiv.	Specifications, Environment	Standard / Water Resistance / Dust Resistant	Precision (JIS)	Class 0
Load Direction	Radial	Rolling Element Material	SUJ2	Size Standards	Metric System
Number of Raceway Ring Rows	Single Row	Allowable Rotational Speed(rpm)	8000

Please check the type/dimensions/specifications of the part C-E6200DDU in the Ball Bearings Rubber Sealed series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What is the difference between ball bearing and roller bearing?: Answer: The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.
Question: What is the classification of bearings according to the shape of rolling elements?: Answer: Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.
Question: What is the classification of bearings according to load direction?: Answer: Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.
Question: What standard does the vibration class of this bearing meet?: Answer: The vibration class of the bearing is above Z1

Check other FAQ (1 items) Hide

Product variants

Part Number
C-E6003DDU
C-E6004DDU
C-E6005DDU
C-E6201DDU
C-E6202DDU
C-E6203DDU

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)	Weight (g)
₹ 108.00	1 Piece(s)	Available	Same day Stock	10	17	35	10	6000	3250	41
₹ 143.00	1 Piece(s)	Available	Same day Stock	10	20	42	12	9400	5000	68
₹ 165.00	1 Piece(s)	Available	Same day Stock	10	25	47	12	10100	5850	79
₹ 96.00	1 Piece(s)	Available	Same day Stock	10	12	32	10	6800	3050	37
₹ 111.00	1 Piece(s)	Available	Same day Stock	10	15	35	11	7650	3750	45
₹ 141.00	1 Piece(s)	Available	Same day Stock	10	17	40	12	9550	4800	67

Search by Category / Brand

Search by Category

How can we improve?