What is the difference between ball bearing and roller bearing?

The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.

What is the classification of bearings according to the shape of rolling elements?

Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.

What is the classification of bearings according to load direction?

Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.

What standard does the vibration class of this bearing meet?

The vibration class of the bearing is above Z1

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-E607DDU

type Inner Dia. d Outer Dia. D Width B (or T) Basic Load Rating Cr (Dynamic) CAD Days to Ship

Specification/Dimensions

type
- C-E6□□DDU
Clear
Inner Dia. d(Ø)
3

4

5

6

7

8

9
Clear
Outer Dia. D(Ø)
8

9

10

11

12

13

14

15

16

17

19

20

22

24

26

28
Clear
Width B (or T)(mm)
4

5

6

7

8

9
Clear
Basic Load Rating Cr (Dynamic)(N)
558

631

641

716

957

1077

1082

1173

1252

1301

1327

1329

1340

1605

1720

1729

2237

2263

2336

3287

3293

3333

3356

4563

4575
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Small Ball Bearings Rubber Sealed (C-E607DDU)

Name: Small Ball Bearings Rubber Sealed
Brand: MISUMI
Price: 140 INR
Availability: InStock

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (4 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Small Ball Bearings Rubber Sealed
Small ball bearings with rubber seals are commonly used in applications where there is a need to protect the bearings from water, dirt, dust, and other contaminants. These bearings are available in various sizes to choose from.
[Feature]
● Bearing Size Standards: Metric System
● Inner Diameter (mm.) : 3, 4, 5, 6, 7, 8 and 9
● Outer Diameter Minimum / Maximum (mm.) : 8 and 28
● Width (mm.) : 4, 5, 6, 7, 8 and 9
● Precision (JIS) : Class 0
● Bearing Type : Closed (Rubber Sealed (DDU))
● Load Direction : Radial Load
[Application]
It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Economy Small Rubber Sealed Ball Bearing

Rubber SealedPrecisionSUJ2 equivalent steel

- Basic Load Rating (Cr, Dynamic): Varies depending on size.

- Material: Made from SUJ2 equivalent steel, offering high surface hardness and wear resistance.

- Load Capacity: Dynamic load ratings within specified range.

- Sealing: Comes with rubber seals (DDU) that provide enhanced protection and longevity by keeping contaminants out.

- Capable of operating at high speeds depending on bearing size and load.

Economy Small Rubber Sealed Ball Bearing

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product of Ball Bearings Overview

・ Light load, medium · low speed, special for medium precision rotation, realizing ultra-low price.
・ It is made of industry standard Ball Bearings steel with high surface hardness and wear resistance.
・ The vibration class of the product is above Z1

Product of Ball Bearings Feature

・ The interface radius of the channel located on the inner and outer ring is slightly larger than the radius of the sphere, in arc shape. Mainly can bear radial load.
・ In addition to the open type Ball Bearings, there are bearings with steel dust cover, bearings with contact rubber seal packing and bearings with non-contact rubber seal packing, or Ball Bearings with stop ring on the outer diameter of outer ring.
・ Ball bearings with dust cover or seal packing are sealed with proper amount of high-quality grease. Deep groove ball bearings generally adopt steel plate stamped cage, which has low friction torque and accuracy grade of 0.

Dimensional Ball Bearings Drawing

Product Dimensional Drawing
(Economic) Small diameter ball bearing Contact rubber seal packing type

Example of Ball Bearings Use

Ball Bearings Motor
1 Motor

Ball Bearings Gear unit
2 Gear unit

Ball Bearings Machine tool
3 Machine tool

Precautions Ball Bearings

When the precision of the shaft and Ball Bearings housing is poor, the bearing will be affected, and its due performance will not be exerted. For example, the poor precision of the mounting part with the bearing will cause relative inclination of the inner and outer rings. At this time, besides the bearing load, the edge load will be increased additionally, which will shorten the fatigue life of the bearing, and even more seriously, it will lead to damage such as cage breakage and sticking.

Please use the following special mounting tool for installation and removal

Ball Bearings heater
Bearing heater

Proper installation of the Ball Bearings heater can guarantee a long life of the bearing.
Rolling bearings are reliable mechanical components with long service life if they are installed and maintained correctly.
After the induction heater is used for heating, the bearing expands outward in the cylindrical direction, which can avoid the damage during installation. Induction heater is one of the most scientific heating methods, which does not need preheating, and can be heated to 110℃ in a few seconds or minutes depending on the weight of bearings, without damaging the prior lubrication

Ball Bearings puller
Bearing puller

When the installation state of the bearing is in the following situations, the special puller can be used for disassembly.
(a) Shaft shape: cylindrical shaft, Inner diameter shape of bearing inner ring: cylindrical hole.
(b) Shaft shape: cylindrical shaft, inner diameter shape of bearing inner ring with tight bushing: tapered hole.
(c) Shaft shape: tapered shaft, Inner diameter shape of bearing inner ring: tapered hole. In either state, the lock nut of the shaft (or the lock nut of the tight bushing) must be released during disassembly, and the lock nut must be placed in a loose state.

Specification Ball Bearings Table

Key points of economy series parts confirmation ①

Inner Diameter d (mm)		Clearance of MISUMI quality products Ball Bearings (μm)		Clearance of economy series products Ball Bearings (μm)
or More	or Less	Minimum	Max.	Minimum	Max.
Less than 10		5	10	7	15

Part Number	d	D	B	r (min.)	Key points of Ball Bearings economy series parts confirmation ② Basic Rated Load		Allowable Rotational Speed rpm (Reference)	Mounting Dimensions			Weight (g) (Reference)
								Ds (min.)	dh (max.)	R (max.)
					Cr (Dynamic) N	Cor (Static) N		Ds (min.)	dh (max.)	R (max.)
C－E693DDU	3	8	4	0.15	558	180	60000	4.2	6.8	0.15	1
C－E623DDU	3	10		0.15	631	219	50000	4.2	8.8		2
C－E684DDU	4	9		0.2	641	227	53000	4.6	8.4
C－E694DDU		11			957	350	48000	5.2	9.8
C－E604DDU		12			957	350	48000	5.6	10.4	0.2	3
C－E624DDU		13	5		1301	488	40000	5.6	11.4		4
C－E634DDU		16			1340	523	36000	8	13		6
C－E685DDU	5	11			716	282	45000	5.8	10.2	0.1	2
C－E695DDU		13	4		1077	432	43000	6.6	11.4	0.2	3
C－E605DDU		14	5		1329	507	40000	6.6	12.4	0.2	5
C－E625DDU		16	5	0.3	1729	675	36000	7	14	0.3	6
C－E635DDU		19	6	0.2	2336	896	32000	7.4	16.6	0.3	8
C－E686DDU	6	13	5		1082	442	40000	6.8	11.2	0.2	4
C－E696DDU		15	5		1340	523	40000	7.6	13.4	0.3	7
C－E606DDU		17	6		2263	846	38000	8	15		7
C－E626DDU		19	6	0.3	2336	896	32000	8	17		8
C－E636DDU		22	7	0.3	3333	1423	30000	10.5	20		5
C－E687DDU	7	14	5	0.2	1173	513	40000	7.8	13.2	0.2	4
C－E697DDU		17	5		1605	719	36000	9	15	0.3	6
C－E607DDU		19	6		2336	896	36000	9	17		8
C－E627DDU		22	7	0.3	3287	1379	30000	9.4	19.6		14
C－E688DDU	8	16	5	0.2	1252	592	36000	9.4	14.6	0.2	4
C－E698DDU		19	6	0.2	2237	917	36000	10	17	0.3	8
C－E608DDU		22	7	0.3	3293	1379	34000		20		14
C－E628DDU		24	8		3333	1423	28000		22		18
C－E638DDU		28	9		4563	1983	28000	12	23		31
C－E689DDU	9	17	5		1327	668	36000	10.4	15.6	0.2	5
C－E699DDU		20	6		1720	840	34000	11	18	0.3	8
C－E609DDU		24	7		3356	1444	32000	11	22		16
C－E629DDU		26	8		4575	1983	28000	11.4	23.6		22

kgf＝N×0.101972

Specification Table

Key points of economy series parts confirmation ①

Inner Diameter d (mm)		Clearance of MISUMI quality products (μm)		Clearance of economy series products (μm)
or More	or Less	Minimum	Max.	Minimum	Max.
Less than 10		5	10	7	15

Part Number	d	D	B	r (min.)	Key points of economy series parts confirmation ② Basic Rated Load		Allowable Rotational Speed rpm (Reference)	Mounting Dimensions			Weight (g) (Reference)
								Ds (min.)	dh (max.)	R (max.)
					Cr (Dynamic) N	Cor (Static) N		Ds (min.)	dh (max.)	R (max.)
C－E693DDU	3	8	4	0.15	558	180	60000	4.2	6.8	0.15	1
C－E623DDU	3	10		0.15	631	219	50000	4.2	8.8		2
C－E684DDU	4	9		0.2	641	227	53000	4.6	8.4
C－E694DDU		11			957	350	48000	5.2	9.8
C－E604DDU		12			957	350	48000	5.6	10.4	0.2	3
C－E624DDU		13	5		1301	488	40000	5.6	11.4		4
C－E634DDU		16			1340	523	36000	8	13		6
C－E685DDU	5	11			716	282	45000	5.8	10.2	0.1	2
C－E695DDU		13	4		1077	432	43000	6.6	11.4	0.2	3
C－E605DDU		14	5		1329	507	40000	6.6	12.4	0.2	5
C－E625DDU		16	5	0.3	1729	675	36000	7	14	0.3	6
C－E635DDU		19	6	0.2	2336	896	32000	7.4	16.6	0.3	8
C－E686DDU	6	13	5		1082	442	40000	6.8	11.2	0.2	4
C－E696DDU		15	5		1340	523	40000	7.6	13.4	0.3	7
C－E606DDU		17	6		2263	846	38000	8	15		7
C－E626DDU		19	6	0.3	2336	896	32000	8	17		8
C－E636DDU		22	7	0.3	3333	1423	30000	10.5	20		5
C－E687DDU	7	14	5	0.2	1173	513	40000	7.8	13.2	0.2	4
C－E697DDU		17	5		1605	719	36000	9	15	0.3	6
C－E607DDU		19	6		2336	896	36000	9	17		8
C－E627DDU		22	7	0.3	3287	1379	30000	9.4	19.6		14
C－E688DDU	8	16	5	0.2	1252	592	36000	9.4	14.6	0.2	4
C－E698DDU		19	6	0.2	2237	917	36000	10	17	0.3	8
C－E608DDU		22	7	0.3	3293	1379	34000		20		14
C－E628DDU		24	8		3333	1423	28000		22		18
C－E638DDU		28	9		4563	1983	28000	12	23		31
C－E689DDU	9	17	5		1327	668	36000	10.4	15.6	0.2	5
C－E699DDU		20	6		1720	840	34000	11	18	0.3	8
C－E609DDU		24	7		3356	1444	32000	11	22		16
C－E629DDU		26	8		4575	1983	28000	11.4	23.6		22

kgf＝N×0.101972

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-E607DDU SALE

Part Number Price Minimum Order Qty. Volume Discount Days to Ship RoHS Inner Dia. d
(Ø) Outer Dia. D
(Ø) Width B (or T)
(mm) Basic Load Rating Cr (Dynamic)
(N) Basic Load Rating Cor (Static)
(N) Weight
(g)

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)	Weight (g)
	₹ 140.00 ₹ 119.00	1 Piece(s)	Available	Same day	10	7	19	6	2336	896	8

₹ 140.00

₹ 119.00

1 Piece(s)

Available

Same day

2336

896

Basic Information

Raceway Ring Shape	Ball	Bearing Type	Rubber Sealed	Outer Ring Type	Flat
Inner/Outer Ring Material	SUJ2 Equiv.	Specifications, Environment	Standard / Water Resistance / Dust Resistant	Precision (JIS)	Class 0
Load Direction	Radial	Rolling Element Material	SUJ2	Size Standards	Metric System
Number of Raceway Ring Rows	Single Row	Allowable Rotational Speed(rpm)	8000

Please check the type/dimensions/specifications of the part C-E607DDU in the Small Ball Bearings Rubber Sealed series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What is the difference between ball bearing and roller bearing?: Answer: The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.
Question: What is the classification of bearings according to the shape of rolling elements?: Answer: Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.
Question: What is the classification of bearings according to load direction?: Answer: Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.
Question: What standard does the vibration class of this bearing meet?: Answer: The vibration class of the bearing is above Z1

Check other FAQ (1 items) Hide

Product variants

Part Number
C-E604DDU
C-E605DDU
C-E606DDU
C-E608DDU
C-E609DDU
C-E623DDU

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)	Weight (g)
₹ 56.00	1 Piece(s)	Available	Same day Stock	10	4	12	4	957	350	3
₹ 58.00	1 Piece(s)	Available	Same day Stock	10	5	14	5	1329	507	5
₹ 58.00	1 Piece(s)	Available	Same day Stock	10	6	17	6	2263	846	7
₹ 140.00	1 Piece(s)	Available	Same day Stock	10	8	22	7	3293	1379	14
₹ 143.00	1 Piece(s)	Available	Same day Stock	10	9	24	7	3356	1444	16
₹ 143.00	1 Piece(s)	Available	Same day Stock	10	3	10	4	631	219	2

Search by Category / Brand

Search by Category

How can we improve?