MiSUMi
Loading...

Ball Bearings Flanged

Brand :
MISUMI

Caution

    Product Description



    Economic Design Case Study

    Ball Bearings Flanged
    ฺBall bearings with flanged are commonly used in applications such as dental handpieces and miniature pumps. These bearings are available in various sizes to choose from.
    [Feature]
    ● Bearing Size Standards: Metric System
    ● Inner Diameter Minimum / Maximum (mm.) : 10 and 25
    ● Outer Diameter Minimum / Maximum (mm.) : 15 and 42
    ● Width Minimum / Maximum (mm.) : 4 and 9
    ● Precision (JIS) : Class 0
    ● Bearing Type : Closed (Double Shielded (ZZ))
    ● Load Direction : Radial Load
    [Application]
    It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

    

    Economy Flanged Ball Bearing

    SUJ2 steelHigh Load CapacityRotation Speed

    - Size Range: Available in various inner diameters, outer diameters, and widths.

    - Size Range: Slightly larger than miniature bearings with inner diameters within specified range.

    - High Load Capacity: Handles slightly heavier loads compared to smaller flanged bearings.

    - Bearing Type: Deep groove ball bearing with a flange for added support.

    - Versatility: Suitable for a wider range of applications requiring flange support.

    Economy Flanged Ball Bearing
    MISUMI Economy Logo

    MISUMI Standard
    MISUMI Standard

    Cheaper Price
    Cheaper Price

    Product Variety
    Product Variety

    3D CAD
    3D CAD Support


    Product of Ball Bearings Overview

    ・ Light load, medium · low speed, special for medium precision rotation, realizing ultra-low price.
    ・ It is made of industry standard Ball Bearings steel with high surface hardness and wear resistance.
    ・ The vibration class of the product of Ball Bearings is above Z1

    Product of Ball Bearings Feature

    ・ The interface radius of the channel located on the inner and outer ring is slightly larger than the radius of the sphere, in arc shape. Mainly can bear radial load.
    ・ In addition to the open type Ball Bearings, there are bearings with steel dust cover, Ball Bearings with contact rubber seal packing and bearings with non-contact rubber seal packing, or bearings with stop ring on the outer diameter of outer ring.
    ・ Ball bearings with dust cover or seal packing are sealed with proper amount of high-quality grease. Deep groove ball bearings generally adopt steel plate stamped cage, which has low friction torque and accuracy grade of 0.

    Dimensional Ball Bearings Drawing

    Product Dimensional Drawing
    (Economic type) Small diameter deep groove ball bearing with flange Double shielded

    Example of Ball Bearings Use

    Ball Bearings Motor
    1 Motor
    Ball Bearings Gear unit
    2 Gear unit
    Ball Bearings Machine tool
    3 Machine tool

    Precautions Ball Bearings

    When the precision of the shaft and Ball Bearings housing is poor, the bearing will be affected, and its due performance will not be exerted. For example, the poor precision of the mounting part with the bearing will cause relative inclination of the inner and outer rings. At this time, besides the Ball Bearings load, the edge load will be increased additionally, which will shorten the fatigue life of the bearing, and even more seriously, it will lead to damage such as cage breakage and sticking.

    Please use the following special mounting tool for installation and removal
    Ball Bearings heater
    Bearing heater    		Proper installation of the Ball Bearings heater can guarantee a long life of the bearing.
    Rolling bearings are reliable mechanical components with long service life if they are installed and maintained correctly.
    After the induction heater is used for heating, the Ball Bearings expands outward in the cylindrical direction, which can avoid the damage during installation. Induction heater is one of the most scientific heating methods, which does not need preheating, and can be heated to 110℃ in a few seconds or minutes depending on the weight of bearings, without damaging the prior lubrication
    Ball Bearings puller
    Bearing puller    		When the installation state of the Ball Bearings is in the following situations, the special puller can be used for disassembly.
    (a) Shaft shape: cylindrical shaft, Inner diameter shape of bearing inner ring: cylindrical hole.
    (b) Shaft shape: cylindrical shaft, inner diameter shape of bearing inner ring with tight bushing: tapered hole.
    (c) Shaft shape: tapered shaft, Inner diameter shape of Ball Bearings inner ring: tapered hole. In either state, the lock nut of the shaft (or the lock nut of the tight bushing) must be released during disassembly, and the lock nut must be placed in a loose state.