Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon or screwdriver slot with a hex socket wrench or a slotted screwdriver, and then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.

Applicable load of cam follower

It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(40 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-CFU5-13

Outer Dia. D Width B Stud Screw Nominal (M) Cam Follower: Stud Screw (Fine Thread) Allowable Rotational Speed Seal type CAD Days to Ship

Specification/Dimensions

Outer Dia. D(Ø)
13

16

19

22

26

30

32

35

40

52
Clear
Width B(mm)
9

11

12

14

18

20

24
Clear
Stud Screw Nominal (M)(mm)
M5×0.8

M6×1

M8×1.25
Clear
Cam Follower: Stud Screw (Fine Thread)(mm)
M10×1

M12×1.5

M16×1.5

M18×1.5

M20×1.5
Clear
Allowable Rotational Speed(rpm)
2400

2900

3600

5500

8000

11000

14000

16240

23200
Clear
Seal
- Not Provided
- Provided
Clear
type
- C-CFU
- C-CFUG
- C-CFUR
- C-CFURG
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

24 Day(s) or Less

54 Day(s) or Less
Clear

Specify Alterations

Cam Followers Straight Slot, Crown (Part Number)

Name: Cam Followers Straight Slot, Crown
Brand: MISUMI
Availability: InStock

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (3 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

C-CFU5-13

C-CFU6-16

C-CFU8-19

C-CFU10-22

C-CFU10-26

C-CFU12-30

C-CFU12-32

C-CFU16-35

C-CFU18-40

C-CFU20-52

C-CFUG5-13

C-CFUG6-16

C-CFUG8-19

C-CFUG10-22

C-CFUG10-26

C-CFUG12-30

C-CFUG12-32

C-CFUG16-35

C-CFUG18-40

C-CFUG20-52

C-CFU5-13

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

Products with d ≥ 10 are being gradually switched over to specifications with through holes in the L dimension. Please take this into account prior to purchasing.

Economy Cam Followers Straight Slot

High Durability Wide Range of Sizes Enhanced Load Capacity

- Made from high-quality SUJ2 material. Ensures long-lasting performance and resistance to wear, making it ideal for heavy-duty applications.

- Available in various outer roller diameters and widths within specified ranges.

- Comes in multiple stud screw sizes.

- Designed to handle high-speed rotation and heavy loads.

- Available in both sealed and non-sealed types. Choose the best option for your environment to prevent intrusion of foreign matter and ensure smooth operation.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Roller Followers Product Overview

Roller Followers Cam bearing is a kind of bearing with shaft, which has its needle roller mounted into the thick-wall outer ring and inner ring, most suitable for the transmission guide rail.
Cam follower is a high-performance bearing with shaft, which has a needle-shaped roller called needle roller mounted inside. The needle roller has the function of improving the rotating capacity and can withstand high-speed rotation. In addition, the outer ring is designed with a thicker wall than ordinary bearings, and can also be used in places subject to impact loads or heavy loads.
Range of Products

Roller Followers Product Feature

1. Equipped with a shaft for easy installation!
2. Ideal for places subject to loads!
3. Also suitable for high speed rotation!

Standard Cam Follower Structure
Standard Cam Structure

Roller Guide Mode
The Roller Followers with cage is suitable for applications with low friction coefficient and high rotation speed, and the full complement roller cam follower is suitable for applications with high rotation speed and heavy load.

With Cage (Standard)	Full Complement Roller Heavy Load Type

Roller Followers Structure of Sealing Part
For the non-sealed type bearing, the gap between the outer ring and the end rod peripheral ring and between the outer ring and the side plate is small, thus forming a labyrinth. For the sealed type bearing, a sealing gasket is mounted in the shielded type labyrinth, thus preventing intrusion of foreign matter.

Non-sealed Type	Sealed Type

Outer Ring O.D. Shape
The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.

Arc Outer Ring	Cylindrical Outer Ring

Slide Rail Load Capacity Comparison

Roller Followers Dimensional Drawing

Specification Table

Roller Followers Related Documents

Product Accuracy (μm)
Allowable Tolerance

Allowable Tolerance of Outer Ring and Allowable Value

Roller Followers Example of Use

Moving Direction
Linear Motion
The surface on the matching side must be flat
and the cam follower moves in a straight line

Swing Direction
The surface on the matching side is curved, and
the cam follower moves in a curve

Attaching Method
Mounting Method

Do not use a hammer to directly hit the flange of the Roller Followers cam bearing during installation, otherwise it will cause poor rotation or fracture. Use a hex socket wrench or a slotted screwdriver.
Secure the hexagon socket or screwdriver slot for fixing, and then turn the nut with a wrench to tighten.

Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Fixing Torque

Roller Followers Precautions

· If the Roller Followers cam follower falls to the ground or is struck hard, it may be damaged.
· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Some cam followers are not filled with grease due to different sizes.
Please refer to the table below and add proper amount of grease to the products that are not filled with grease before use.

Cam Follower Grease Performance and Service Temperature
Grease and Service Temperature

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
C-CFU5-13
C-CFU6-16
C-CFU8-19
C-CFU10-22
C-CFU10-26
C-CFU12-30
C-CFU12-32
C-CFU16-35
C-CFU18-40
C-CFU20-52
C-CFUG5-13
C-CFUG6-16
C-CFUG8-19
C-CFUG10-22
C-CFUG10-26
C-CFUG12-30
C-CFUG12-32
C-CFUG16-35
C-CFUG18-40
C-CFUG20-52
C-CFUR5-13
C-CFUR6-16
C-CFUR8-19
C-CFUR10-22
C-CFUR10-26
C-CFUR12-30
C-CFUR12-32
C-CFUR16-35
C-CFUR18-40
C-CFUR20-52
C-CFURG5-13
C-CFURG6-16
C-CFURG8-19
C-CFURG10-22
C-CFURG10-26
C-CFURG12-30
C-CFURG12-32
C-CFURG16-35
C-CFURG18-40
C-CFURG20-52

Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Outer Dia. D (Ø)	Width B (mm)	Stud Screw Nominal (M) (mm)	Cam Follower: Stud Screw (Fine Thread) (mm)	Basic Load Rating Cr (Dynamic) (kN)	Basic Load Rating Cor (Static) (kN)	Allowable Rotational Speed (rpm)	Seal
₹ 675.00	1 Piece(s)	Available	Same day	10	13	9	M5×0.8	-	2.51	2.22	23200	Not Provided
₹ 656.00	1 Piece(s)	Available	Same day	10	16	11	M6×1	-	3.15	3.3	14000	Not Provided
₹ 708.00	1 Piece(s)	Available	Same day	10	19	11	M8×1.25	-	3.5	3.9	11000	Not Provided
₹ 731.00	1 Piece(s)	Available	Same day	10	22	12	-	M10×1	4.5	5.2	8000	Not Provided
₹ 775.00	1 Piece(s)	Available	Same day	10	26	12	-	M10×1	4.5	5.2	8000	Not Provided
₹ 799.00	1 Piece(s)	Available	Same day	10	30	14	-	M12×1.5	6.8	8.4	5500	Not Provided
₹ 865.00	1 Piece(s)	Available	Same day	10	32	14	-	M12×1.5	6.8	8.4	5500	Not Provided
₹ 1,023.00	1 Piece(s)	Available	Same day	10	35	18	-	M16×1.5	9.8	14.1	3600	Not Provided
₹ 1,243.00	1 Piece(s)	Available	Same day	10	40	20	-	M18×1.5	10.9	15.5	2900	Not Provided
₹ 1,736.00	1 Piece(s)	Available	Same day	10	52	24	-	M20×1.5	16.7	29	2400	Not Provided
₹ 1,482.00	1 Piece(s)	Available	54 Day(s)	10	13	9	M5×0.8	-	4.5	5.3	16240	Not Provided
₹ 1,461.00	1 Piece(s)	Available	54 Day(s)	10	16	11	M6×1	-	4.9	6.5	14000	Not Provided
₹ 1,461.00	1 Piece(s)	Available	54 Day(s)	10	19	11	M8×1.25	-	5.4	7.9	11000	Not Provided
₹ 1,482.00	1 Piece(s)	Available	54 Day(s)	10	22	12	-	M10×1	6.2	9.1	8000	Not Provided
₹ 1,523.00	1 Piece(s)	Available	54 Day(s)	10	26	12	-	M10×1	7.3	11.3	8000	Not Provided
₹ 1,545.00	1 Piece(s)	Available	54 Day(s)	10	30	14	-	M12×1.5	9.5	14.6	5500	Not Provided
₹ 1,607.00	1 Piece(s)	Available	54 Day(s)	10	32	14	-	M12×1.5	10	15.8	5500	Not Provided
₹ 1,752.00	1 Piece(s)	Available	54 Day(s)	10	35	18	-	M16×1.5	12.8	23	3600	Not Provided
₹ 1,961.00	1 Piece(s)	Available	54 Day(s)	10	40	20	-	M18×1.5	14.8	26.5	2900	Not Provided
₹ 2,460.00	1 Piece(s)	Available	54 Day(s)	10	52	24	-	M20×1.5	22.6	48	2400	Not Provided
₹ 656.00	1 Piece(s)	Available	Same day	10	13	9	M5×0.8	-	2.51	2.22	16240	Provided
₹ 656.00	1 Piece(s)	Available	Same day	10	16	11	M6×1	-	3.15	3.3	14000	Provided
₹ 657.00	1 Piece(s)	Available	Same day	10	19	11	M8×1.25	-	3.5	3.9	11000	Provided
₹ 770.00	1 Piece(s)	Available	Same day	10	22	12	-	M10×1	4.5	5.2	8000	Provided
₹ 791.00	1 Piece(s)	Available	Same day	10	26	12	-	M10×1	4.5	5.2	8000	Provided
₹ 821.00	1 Piece(s)	Available	Same day	10	30	14	-	M12×1.5	6.8	8.4	5500	Provided
₹ 885.00	1 Piece(s)	Available	Same day	10	32	14	-	M12×1.5	6.8	8.4	5500	Provided
₹ 1,065.00	1 Piece(s)	Available	Same day	10	35	18	-	M16×1.5	9.8	14.1	3600	Provided
₹ 1,263.00	1 Piece(s)	Available	Same day	10	40	20	-	M18×1.5	10.9	15.5	2900	Provided
₹ 1,630.00	1 Piece(s)	Available	Same day	10	52	24	-	M20×1.5	16.7	29	2400	Provided
₹ 1,482.00	1 Piece(s)	Available	54 Day(s)	10	13	9	M5×0.8	-	4.5	5.3	16240	Provided
₹ 1,461.00	1 Piece(s)	Available	54 Day(s)	10	16	11	M6×1	-	4.9	6.5	14000	Provided
₹ 1,461.00	1 Piece(s)	Available	54 Day(s)	10	19	11	M8×1.25	-	5.4	7.9	11000	Provided
₹ 1,523.00	1 Piece(s)	Available	Same day	10	22	12	-	M10×1	6.2	9.1	8000	Provided
₹ 1,545.00	1 Piece(s)	Available	54 Day(s)	10	26	12	-	M10×1	7.3	11.3	8000	Provided
₹ 1,565.00	1 Piece(s)	Available	54 Day(s)	10	30	14	-	M12×1.5	9.5	14.6	5500	Provided
₹ 1,627.00	1 Piece(s)	Available	24 Day(s)	10	32	14	-	M12×1.5	10	15.8	5500	Provided
₹ 1,794.00	1 Piece(s)	Available	54 Day(s)	10	35	18	-	M16×1.5	12.8	23	3600	Provided
₹ 2,001.00	1 Piece(s)	Available	54 Day(s)	10	40	20	-	M18×1.5	14.8	26.5	2900	Provided
₹ 2,502.00	1 Piece(s)	Available	54 Day(s)	10	52	24	-	M20×1.5	22.6	48	2400	Provided

Product TOP

Basic Information

Product Category	Cam Followers	Roller Type	Spherical Outer Ring	Tightening Method	Standard Type
Cam Follower Type	Standard Type	Size Standards	Metric System	Roller Lining	Not Provided
Shaft	Provided	Roller Guiding Method	With Retainer	Application	Regular

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Mounting Method: Answer: Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon or screwdriver slot with a hex socket wrench or a slotted screwdriver, and then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Question: Applicable load of cam follower: Answer: It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.
Question: Usage difference of different O.D. shapes of outer ring: Answer: The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.

Search by Category / Brand

Search by Category

How can we improve?