Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(537 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]

Grade Color Hole Machining Finishing Plate Thickness T Dimension Tolerance AB Dimension Tolerance Material Name A B Counterbored Hole Nominal Dia. [Z] F G Nominal Dia. of Threaded Insert [M] Through Hole Nominal Dia. [N] type CAD Days to Ship

Specification/Dimensions

Grade
Standard

Conductive

Antistatic

Sliding

High Strength

Weather Resistant

Antistatic / Heat-Resistant
Clear
Color
- Blue
- Ivory
- Black
- Purple
- Black Gray
- Dark Brown
Clear
Hole Machining
No Drilling Alteration

2 Holes, Horizontal

2 Holes, Vertical

4H

6H
Clear
Finishing
- 4-side Milling
- 6-surface Milling
- Circular Sawing
- Guaranteed Perpendicularity of Circular Sawing
- Upper-lower Surface Milling
Clear
Plate Thickness(mm)
5

7

10

12

15

20

25

30

40

50

60

70

80

90

100
[5-29/0.1mm Unit(s)]
Clear
T Dimension Tolerance
- M (0/-0.2)
- N (±0.1)
- Q (+0.2/0)
Clear
AB Dimension Tolerance
- M (0/-0.2)
- N (±0.1)
- Q (+0.2/0)
Clear
Material Name
MC501CDR2

MC501CDR6

MC501CDR9

MC602ST

MC703HL

Weather Resistance (MC801)

MC900NC

MC901
Clear
A(mm)
[10-400/0.1mm Unit(s)][20-500/0.5mm Unit(s)][20-600/1mm Unit(s)]
Clear
B(mm)
[10-200/0.1mm Unit(s)][20-400/0.5mm Unit(s)][20-500/1mm Unit(s)]
Clear
Counterbored Hole Nominal Dia. [Z]
3

4

5

6

8

10
Clear
F(mm)
[4.5-595.5/0.5mm Unit(s)]
Clear
G(mm)
[4.5-495.5/0.5mm Unit(s)]
Clear
Nominal Dia. of Threaded Insert [M]
3

4

5

6

8

10
Clear
Through Hole Nominal Dia. [N]
3

4

5

6

8

10
Clear
type
- MCA
- MCA-G
- MCA2F□
- MCA2F□□H
- MCA4F□
- MCA6F□□
- MCANT□
- MCAPS
- MCAPS2F□
- MCAPS2F□□H
- MCAPS2H
- MCAPS2HL
- MCAPS4F□
- MCAPS4H
- MCAPS6F□□
- MCAPS6H
- MCAPSNT□
- MCAS
- MCAS2F□
- MCAS2F□□H
- MCAS4F□
- MCAS6F□□
- MCASNT□
- MCAS□H
- MCAW
- MCAW2F□
- MCAW2F□□H
- MCAW4F□
- MCAW6F□□
- MCAWNT□
- MCAW□H
- MCAY
- MCAY2F□
- MCAY2F□□H
- MCAY4F□
- MCAY6F□□
- MCAYNT□
- MCAY□H
- MCA□H
- MCCA
- MCCA2F□
- MCCA2F□□H
- MCCA4F□
- MCCA6F□□
- MCCANT□
- MCCA□H
- MCDA
- MCDA2F□
- MCDA2F□□H
- MCDA4F□
- MCDA6F□□
- MCDANT□
- MCDA□H
- MCEA
- MCEA2F□
- MCEA2F□□H
- MCEA4F□
- MCEA6F□□
- MCEANT□
- MCEA□H
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

8 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

MC Nylon® Plates-Standard / Sliding / High Strength / Conductivity / Weather Resistance Grade

Name: MC Nylon® Plates-Standard / Sliding / High Strength / Conductivity / Weather Resistance Grade
Brand: MISUMI
Availability: PreOrder

Brand :

MISUMI

Part Number :

MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]

MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]

MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8,10]

MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]

MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]

MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]

MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]

MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]

MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]

MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]

MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]

MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]

MCA2FM-[20-400/1]-[20-250/1]-[5-29/0.1]

MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]

MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]

MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8]

MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]

MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]

MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]

MCA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]

MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

Please check the content on our website as the PDF does not contain the most up-to-date information.

Product Description

[Features]·MC Nylon is a general-purpose engineering plastic used in various industrial applications.

MC Nylon® Plates-Standard / Sliding / High Strength / Conductivity / Weather Resistance Grade:Related Image

■Standard Type

Type	Grade / Material	Color	Operating Ambient Temperature
MCA	Standard / MC901	Blue	-40~120°C
MCA-G	Standard Thick Type / MC901	Blue
MCAW	Standard / MC900NC	Ivory
MCAS	Sliding / MC703HL	Purple
MCAY	High Strength / MC602ST	Dark Brown	Ambient Temp. ~ 150°C
MCAPS	Weather Resistance / MC801	Dark Gray	Ambient Temp. ~ 120°C
MCCA	Conductivity CDR2 / MC501CDR2	Black	Ambient Temp. ~ 120°C
MCDA	Antistatic CDR6 / MC501CDR6	Black	Ambient Temp. ~ 120°C
MCEA	Antistatic / Heat Resistant CDR9 / MC501CDR9	Black	Ambient Temp. ~ 150°C

■Pre-drilled Type

Type	Grade / Material	Color	Operating Ambient Temperature
MCA	Standard / MC901	Blue	-40~120°C
MCAW	Standard / MC900NC	Ivory
MCAS	Sliding / MC703HL	Purple
MCAY	High Strength / MC602ST	Dark Brown	Ambient Temp. ~ 150°C
MCAPS	Weather Resistance / MC801	Dark Gray	Ambient Temp. ~ 120°C
MCCA	Conductivity CDR2 / MC501CDR2	Black	Ambient Temp. ~ 120°C
MCDA	Antistatic CDR6 / MC501CDR6	Black	Ambient Temp. ~ 120°C
MCEA	Antistatic / Heat Resistant CDR9 / MC501CDR9	Black	Ambient Temp. ~ 150°C

Specifications

■Standard Type

Part Number	-	A	-	B	-	T
MCA	-	300	-	200	-	40
MCANTQ	-	200.5	-	100.5	-	10
MCA4FN	-	150.5	-	100.3	-	15
MCA6FMM	-	100.3	-	90.5	-	10.5
MCA2FQ	-	80	-	50	-	5

• Circular Sawing
• Guaranteed Perpendicularity of Circular Sawing
• 4-side Milling
• 6-surface Milling
• Upper-lower Surface Milling

■Pre-drilled Type

Part Number	-	A	-	B	-	T	-	F	-	G	-	Screw Nominal Dia.	-	L
MCDA4H MCDA4H	- -	200 500	- -	155 300	- -	5 10	- -	F160 F300	- -	G120 G200	- -	N4 M5	-	L7.5

• Dimension Tolerance of A and B

T	A, B	A, B Dimension Tolerance
T	Unit: mm	A, B Dimension Tolerance
5~30	~99	±0.5
	100~250	±0.75
	251~	±1.0
40~100	~300	0~+5

• T Dimension Tolerance, Rate of Camber and Torsion

T	T Dimension Tolerance	Rates of Camber and Torsion
T	T Dimension Tolerance	per 1,000mm
5, 7, 10	0~+1.5	1.2% or Less
12, 15, 20	0~+1.5	1.0% or Less
25, 30, 40	0~+2.0	0.4% or Less
50, 60	0~+3.5
70, 80, 90, 100	0~+5.0

•Precision Guarantee

Finish	Width Parallelism	Perpendicularity of Reference Plane
	per 100mm
Guaranteed Perpendicularity of Circular Sawing (NT)	0.1	0.1
4-side Milling (4F)
6-surface Milling (6F)

Reference plane stickers are attached to 4-side milled plates.

■ Standard Type

Part Number								Dimension Range by Material	A	B	T
Type		Finish Symbol Selection	T Dimension Tolerance	A, B Dimension Tolerance
MCA MCA-G MCAW MCAS MCAY MCAPS MCCA MCDA MCEA	(Standard, Blue) (Standard Thick Type) (Standard Ivory) (Sliding) (High Strength) (Weather Resistance) (Conductivity CDR2) (Antistatic CDR6) (Antistatic / Heat Resistant CDR9)	Circular Sawing							1mm Increment		Selectable
		-	Not available	Not available				MCA	20~500	20~400	5, 7, 10, 12, 15, 20, 25, 30
									40~300	40~300	40, 50, 60
								MCA-G	301~500	301~500	40, 50, 60
									70~300	70~300	70, 80, 90, 100
								MCEA	20~500	20~400	10, 12, 15, 20, 25
								Others			5, 7, 10, 12, 15, 20, 25, 30
		Guaranteed Perpendicularity of Circular Saw Cuts (NT)							0.5mm Increment		Selectable
		NT	Not available		T5, 7, 10	T12, 15, 20	T25, 30	MCEA	20~500	20~400	10, 12, 15, 20, 25
				Q	0~+0.3	0~+0.4	0~+0.5	Others			5, 7, 10, 12, 15, 20, 25, 30
				N	±0.2	±0.3	±0.4
				M	-0.3~0	-0.4~0	-0.5~0
		4-side Milling (4F)							0.1mm Increment		Selectable
		4F	Not available	Q 0~+0.2 N ±0.1 M -0.2~0				MCEA	10~400	10~200	10, 12, 15, 20, 25
								Others			5, 7, 10, 12, 15, 20, 25, 30
		6-surface Milling (6F)							0.1mm Increment		0.1mm Increment
		6F	Q 0~+0.2 N ±0.1 M -0.2~0	Q 0~+0.2 N ±0.1 M -0.2~0				MCEA	10~400	10~200	10~24
								Others			5~29
		Upper-lower Surface Milling (2F)							1mm Increment		0.1mm Increment
		2F	Q 0~+0.2 N ±0.1 M -0.2~0	Not available				MCEA	20~400	20~250	10~24
								Others			5~29

T40, 50 and 60 may have steps on cut surfaces.
If MCA-G, A≥B≥T

■Pre-drilled Type

Part Number				A	B	T Dimension Range by Material	T	F	G
Type		T Dimension Tolerance	Number of Holes
MCA MCAW MCAS MCAY MCAPS MCCA MCDA MCEA	(Standard, Blue) (Standard, Ivory) (Sliding) (High Strength) (Weather Resistance) (Conductivity CDR2) (Antistatic CDR6) (Antistatic / Heat Resistant CDR9)	Circular Sawing		1mm Increment			Selectable	0.5mm Increment
		Not available	2H (Horizontal) 2HL (Vertical) 4H 6H	20~500	20~400	MCEA	10, 12, 15, 20, 25	6~491.5 (2H, 4H) 4.5~395.5 (2HL) 6~245.5 (6H)	4.5~395.5 (2H) 6~391.5 (2HL, 4H, 6H)
						Others	5, 7, 10, 12, 15, 20, 25, 30
		Upper-lower Surface Milling (2F)		1mm Increment			0.1mm Increment	0.5mm Increment
		2FQ 0~+0.2 2FN ±0.1 2FM -0.2~0	2H (Horizontal) 2HL (Vertical) 4H 6H	20~400	20~250	MCEA	10~24	6~391.5 (2H, 4H) 4.5~395.5 (2HL) 6~195.5 (6H)	4.5~245.5 (2H) 6~241.5 (2HL, 4H, 6H)
						Others	5~29

Dimension F Specification Range: For 2H and 4H, d(d₁)+2.5≤F≤A-d(d₁)-5; for 2HL, d(d₁)/2+2.5≤F≤A-d(d₁)/2-2.5; for 6H, d(d₁)+2.5≤F≤(A-d(d₁)-5)/2.
Dimension G Specification Range: For 2H, d(d₁)/2+2.5≤G≤B-d(d₁)/2-2.5; for 2HL, 4H and 6H, d(d₁)+2.5≤G≤B-d(d₁)-5.
For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).

T Dimension	Pre-drilled Hole Nominal Dia.
	Through Hole	Counterbore Hole					Threaded Insert
	N	Z					M						L
5~6	3 4 5 6 8 10	-					3	4					(Threaded Insert Length) Select from Table 1
7~9		3	4				3	4	5	6
10~14			4	5	6		3	4	5	6	8	10
15~30			4	5	6	8	3	4	5	6	8	10

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]
MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FM-[20-400/1]-[20-250/1]-[5-29/0.1]
MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8]
MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]
MCA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FN-[20-400/1]-[20-250/1]-[5-29/0.1]
MCA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]
MCA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
MCA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
MCA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
MCA2FQ-[20-400/1]-[20-250/1]-[5-29/0.1]
MCA2H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-591.5/0.5]-G[4.5-495.5/0.5]-M[3,4,5,6,8,10]
MCA2H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-591.5/0.5]-G[4.5-495.5/0.5]-N[3,4,5,6,8,10]
MCA2H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-591.5/0.5]-G[4.5-495.5/0.5]-Z[3,4,5,6,8]
MCA2HL-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[4.5-595.5/0.5]-G[6-491.5/0.5]-M[3,4,5,6,8,10]
MCA2HL-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[4.5-595.5/0.5]-G[6-491.5/0.5]-N[3,4,5,6,8,10]
MCA2HL-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[4.5-595.5/0.5]-G[6-491.5/0.5]-Z[3,4,5,6,8]
MCA4FM-[10-400/0.1]-[10-200/0.1]-[5,7,10,12,15,20,25,30]
MCA4FN-[10-400/0.1]-[10-200/0.1]-[5,7,10,12,15,20,25,30]
MCA4FQ-[10-400/0.1]-[10-200/0.1]-[5,7,10,12,15,20,25,30]
MCA4H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-591.5/0.5]-G[6-491.5/0.5]-M[3,4,5,6,8,10]
MCA4H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-591.5/0.5]-G[6-491.5/0.5]-N[3,4,5,6,8,10]
MCA4H-[20-600/1]-[20-500/1]-[5,7,10,12,15,20,25,30]-F[6-591.5/0.5]-G[6-491.5/0.5]-Z[3,4,5,6,8]
MCA6FMM-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FMN-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FMQ-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FNM-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FNN-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FNQ-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FQM-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FQN-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FQQ-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Grade	Color	Hole Machining	Finishing	Plate Thickness (mm)	T Dimension Tolerance	AB Dimension Tolerance	Material Name	A (mm)	B (mm)	Counterbored Hole Nominal Dia. [Z]	F (mm)	G (mm)	Nominal Dia. of Threaded Insert [M]	Through Hole Nominal Dia. [N]
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Horizontal	Upper-lower Surface Milling	5 ～ 29	M (0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Horizontal	Upper-lower Surface Milling	5 ～ 29	M (0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Horizontal	Upper-lower Surface Milling	5 ～ 29	M (0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	4.5 ～ 245.5	-	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Vertical	Upper-lower Surface Milling	5 ～ 29	M (0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Vertical	Upper-lower Surface Milling	5 ～ 29	M (0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Vertical	Upper-lower Surface Milling	5 ～ 29	M (0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 8	4.5 ～ 395.5	6 ～ 245.5	-	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	4H	Upper-lower Surface Milling	5 ～ 29	M (0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	4H	Upper-lower Surface Milling	5 ～ 29	M (0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	4H	Upper-lower Surface Milling	5 ～ 29	M (0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	6 ～ 245.5	-	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	6H	Upper-lower Surface Milling	5 ～ 29	M (0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	6H	Upper-lower Surface Milling	5 ～ 29	M (0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	6H	Upper-lower Surface Milling	5 ～ 29	M (0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 195.5	6 ～ 245.5	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	Upper-lower Surface Milling	5 ～ 29	M (0/-0.2)	-	MC901	20 ～ 400	20 ～ 250	-	-	-	-	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Horizontal	Upper-lower Surface Milling	5 ～ 29	N (±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Horizontal	Upper-lower Surface Milling	5 ～ 29	N (±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Horizontal	Upper-lower Surface Milling	5 ～ 29	N (±0.1)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 8	6 ～ 391.5	4.5 ～ 245.5	-	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Vertical	Upper-lower Surface Milling	5 ～ 29	N (±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Vertical	Upper-lower Surface Milling	5 ～ 29	N (±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Vertical	Upper-lower Surface Milling	5 ～ 29	N (±0.1)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 8	4.5 ～ 395.5	6 ～ 245.5	-	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	4H	Upper-lower Surface Milling	5 ～ 29	N (±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	4H	Upper-lower Surface Milling	5 ～ 29	N (±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	4H	Upper-lower Surface Milling	5 ～ 29	N (±0.1)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	6 ～ 245.5	-	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	6H	Upper-lower Surface Milling	5 ～ 29	N (±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	6H	Upper-lower Surface Milling	5 ～ 29	N (±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	6H	Upper-lower Surface Milling	5 ～ 29	N (±0.1)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 195.5	6 ～ 245.5	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	Upper-lower Surface Milling	5 ～ 29	N (±0.1)	-	MC901	20 ～ 400	20 ～ 250	-	-	-	-	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Horizontal	Upper-lower Surface Milling	5 ～ 29	Q (+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Horizontal	Upper-lower Surface Milling	5 ～ 29	Q (+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Horizontal	Upper-lower Surface Milling	5 ～ 29	Q (+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	4.5 ～ 245.5	-	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Vertical	Upper-lower Surface Milling	5 ～ 29	Q (+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Vertical	Upper-lower Surface Milling	5 ～ 29	Q (+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Vertical	Upper-lower Surface Milling	5 ～ 29	Q (+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 8	4.5 ～ 395.5	6 ～ 245.5	-	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	4H	Upper-lower Surface Milling	5 ～ 29	Q (+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	4H	Upper-lower Surface Milling	5 ～ 29	Q (+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	4H	Upper-lower Surface Milling	5 ～ 29	Q (+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	6 ～ 245.5	-	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	6H	Upper-lower Surface Milling	5 ～ 29	Q (+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	6H	Upper-lower Surface Milling	5 ～ 29	Q (+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	6H	Upper-lower Surface Milling	5 ～ 29	Q (+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 195.5	6 ～ 245.5	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	Upper-lower Surface Milling	5 ～ 29	Q (+0.2/0)	-	MC901	20 ～ 400	20 ～ 250	-	-	-	-	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Horizontal	Circular Sawing	5 ～ 30	-	-	MC901	20 ～ 600	20 ～ 500	-	6 ～ 591.5	4.5 ～ 495.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Horizontal	Circular Sawing	5 ～ 30	-	-	MC901	20 ～ 600	20 ～ 500	-	6 ～ 591.5	4.5 ～ 495.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Horizontal	Circular Sawing	5 ～ 30	-	-	MC901	20 ～ 600	20 ～ 500	3 ～ 8	6 ～ 591.5	4.5 ～ 495.5	-	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Vertical	Circular Sawing	5 ～ 30	-	-	MC901	20 ～ 600	20 ～ 500	-	4.5 ～ 595.5	6 ～ 491.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Vertical	Circular Sawing	5 ～ 30	-	-	MC901	20 ～ 600	20 ～ 500	-	4.5 ～ 595.5	6 ～ 491.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	2 Holes, Vertical	Circular Sawing	5 ～ 30	-	-	MC901	20 ～ 600	20 ～ 500	3 ～ 8	4.5 ～ 595.5	6 ～ 491.5	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	4-side Milling	5 ～ 30	-	M (0/-0.2)	MC901	10 ～ 400	10 ～ 200	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	4-side Milling	5 ～ 30	-	N (±0.1)	MC901	10 ～ 400	10 ～ 200	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	4-side Milling	5 ～ 30	-	Q (+0.2/0)	MC901	10 ～ 400	10 ～ 200	-	-	-	-	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	4H	Circular Sawing	5 ～ 30	-	-	MC901	20 ～ 600	20 ～ 500	-	6 ～ 591.5	6 ～ 491.5	3 ～ 10	-
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	4H	Circular Sawing	5 ～ 30	-	-	MC901	20 ～ 600	20 ～ 500	-	6 ～ 591.5	6 ～ 491.5	-	3 ～ 10
-	1 Piece(s)	10 Day(s) or more	10	Standard	Blue	4H	Circular Sawing	5 ～ 30	-	-	MC901	20 ～ 600	20 ～ 500	3 ～ 8	6 ～ 591.5	6 ～ 491.5	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	6-surface Milling	5 ～ 29	M (0/-0.2)	M (0/-0.2)	MC901	10 ～ 400	10 ～ 200	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	6-surface Milling	5 ～ 29	M (0/-0.2)	N (±0.1)	MC901	10 ～ 400	10 ～ 200	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	6-surface Milling	5 ～ 29	M (0/-0.2)	Q (+0.2/0)	MC901	10 ～ 400	10 ～ 200	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	6-surface Milling	5 ～ 29	N (±0.1)	M (0/-0.2)	MC901	10 ～ 400	10 ～ 200	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	6-surface Milling	5 ～ 29	N (±0.1)	N (±0.1)	MC901	10 ～ 400	10 ～ 200	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	6-surface Milling	5 ～ 29	N (±0.1)	Q (+0.2/0)	MC901	10 ～ 400	10 ～ 200	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	6-surface Milling	5 ～ 29	Q (+0.2/0)	M (0/-0.2)	MC901	10 ～ 400	10 ～ 200	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	6-surface Milling	5 ～ 29	Q (+0.2/0)	N (±0.1)	MC901	10 ～ 400	10 ～ 200	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Standard	Blue	No Drilling Alteration	6-surface Milling	5 ～ 29	Q (+0.2/0)	Q (+0.2/0)	MC901	10 ～ 400	10 ～ 200	-	-	-	-	-

1
2
3
4
5
Next >>

Product TOP

Basic Information

Material	MC Nylon

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?