(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
Select part number to Order Now/ Add to Cart
Caution
Aluminum Frame Series 8-45, L shape 90 x 90 x 45mm
Surface treatment is not applied to cut surfaces and additional machining parts.
Note that, for some of the types shown here, order might be unable to be received by the MISUMI Thailand, Malaysia, Indonesia, and/or India offices.
[ ! ]Cut surfaces and altered parts are not surface treated.
■8-45 Series
Aluminum Extrusions with 10mm Slot Width. Applicable to M8 Screws.
Part Number | - | L |
HFS8-909045 | - | 800 |
KHFS8-909045 | - | 4000 |
■Configurable Length Extrusion
Type | [ M ]Material | [ S ]Surface Treatment | Part Number | L 0.5mm Increment | Mass kg/m |
Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
ℓx | ℓy | |||||||
HFS | A6N01SS-T5 | Clear Anodize | HFS8-909045 | 50~4000 | 5.55 | 2053 | 149.6x104 | 149.6x104 |
EFS | A6N01SS-T5 | Clear Anodize | EFS8-909045 | 50~4000 | 5.36 | 1988 | 149.72x104 | 149.72x104 |
NEFS | A6063S-T5 | Clear Anodize | NEFS8-909045 | 50~4000 | 5.36 | 1988 | 149.72x104 | 149.72x104 |
[ ! ]For some product types, up to 6,000mm length is available.
[ ! ]Some extrusions are not applicable. For details, refer to "Information about Non-FA Catalog Standard Product Services" (P.131) and contact the relevant person in charge at MISUMI.
■Fixed Length Extrusion (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
Type | [ M ]Material | [ S ]Surface Treatment | Part Number | L mm |
Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
ℓx | ℓy | ||||||
HFS | A6N01SS-T5 | Clear Anodize | KHFS8-909045 | 4000 | 2053 | 149.6x104 | 149.6x104 |
EFS | A6N01SS-T5 | Clear Anodize | KEFS8-909045 | 4000 | 1988 | 149.72x104 | 149.72x104 |
NEFS | A6063S-T5 | Clear Anodize | KNEFS8-909045 | 4000 | 1988 | 149.72x104 | 149.72x104 |
[ ! ]Effective length of 4000mm indicates extrusions with an effective length of 4000mm or more. The actual length including marginal grip is more than 4000mm (several dozen mm). Fixed Length Extrusions must be cut by users thus the exact length cannot be specified.
Category | Alteration Names | Codes | Explanations | Catalog Page |
Aluminum Frame Alteration Summary/Chamfer/Part# Labeling Service | P2-755&756 | |||
End Tapping | End Tapping on Center Hole | LTP/RTP/TPW LHP/RHP/HPW | Add tappings on frame ends. | P2-757 |
End Tapping 4 Corner Holes | LSP/RSP/SPW | P2-768 | ||
Specify How to Cut | Precision Cut | SC | Change total length tolerance. (L±0.5→L±0.2) [ ! ]Available only for L≦1500 | P2-758 |
45 deg Cut | L_T45/R_T45 | Cut at 45 deg angle. | ||
Wrench Access Holes | Wrench Access Hole at Fixed Position | LWP/RWP | Add wrench access holes at fixed position for blind joints. | P2-759&760 |
Wrench Access Hole at Specified Position | AH/BH/AV/BV | Add wrench access holes at specified position for blind joints. | P2-761&762 | |
Counterbores | Counterbores at Specified Position | Z6/XA100 | Add counterbores at specified position. Use the holes for connecting the frames and a table top. | P2-763 |
Holes for Specific Blind Joint Type | D Hole | LDH/RDH | Add holes needed for Single Joint connection. | P2-764 |
S Hole | LSH/RSH | Add holes needed for pre-assembly double joint connection. | P2-765 | |
M Hole | LMH/RMH | Add holes needed for post-assembly double joint connection. | P2-766 | |
L Hole | JLP/KLP | Add holes needed for parallel joint connection. | P2-767 | |
Other Alterations | GNFS/GFS Series End Tapping | LTS/RTS/TSW | Add end tappings on high rigidity frames. | P2-768 |
HFSR Series End Tapping | LTS/RTS/TSW | Add end tappings needed for adding a protection cover on the end fo HFSR series frame. |
Part Number |
---|
EFS8-909045-[50-4000/0.5] |
KEFS8-909045-4000 |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to Ship | RoHS | Extrusion Type_ | Material | L Dimension Fixed, Specified | Overall Length L (Effective Length) (mm) | Overall Length L (mm) |
---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) or more | 10 | EFS (Lightweight) | A6N01SS-T5 | Configurable | - | 50 ~ 4000 | ||
₹ 238,520.00 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | EFS (Lightweight) | A6N01SS-T5 | Stationary | 4000 | - |
Loading...
Standard Extrusion Size(mm) | 45 | Extrusion Series | MISUMI 8-45 Series (10 mm Groove Width) | Extrusion Type | L Shape |
---|---|---|---|---|---|
Surface Treatment | Clear Anodize | Surface Milled | Not Provided | Extrusion Size: Width (A)(mm) | 90 |
Extrusion Size: Thickness (T)(mm) | 90 | Extrusion Size: L-Shaped Width(mm) | 45 | Alterations | 45 |
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy