Aluminum Frame 6 Series/slot width 8/30x60mm

Aluminum Frame 6 Series/slot width 8/30x60mm
  • Volume Discount

"6 Series 30mm, 60mm Square Aluminum Extrusions with 2 Slots."

Note that, for some of the types shown here, order might be unable to be received by the MISUMI Indonesia offices.

Aluminum Extrusion 6 Series/slot width 8/30x60mm:Related Image

Aluminum Extrusion 6 Series/slot width 8/30x60mm:Related Image

Aluminum Extrusion 6 Series/slot width 8/30x60mm:Related Image

[ ! ]Cut surfaces and altered parts are not surface treated.

■6 Series
Aluminum Extrusions with 8mm Slot Width. Applicable to M6 Screws.

Specifications

Part Number - L
EFSH6-3060 - 800
KHFSH6-3060 - 4000


■Configurable Length Extrusion

Type [ M ]Material [ S ]Surface Treatment Part Number L 0.5mm Increment Mass
kg/m
Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
HFS A6N01SS-T5 Clear Anodize HFSH6-3060 50~4000 1.73 642 6.36x104 21.41x104
EFS A6N01SS-T5 Clear Anodize EFSH6-3060 50~4000 1.58 585 6.45x104 21.53x104

[ ! ]For some product types, up to 6,000mm length is available.
[ ! ]Some extrusions are not applicable. For details, refer to "Information about Non-FA Catalog Standard Product Services" (P.131) and contact the relevant person in charge at MISUMI.
■Fixed Length Extrusion (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.

Type [ M ]Material [ S ]Surface Treatment Part Number Lmm Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
HFS A6N01SS-T5 Clear Anodize KHFSH6-3060 4000 642 6.36x104 21.41x104
EFS A6N01SS-T5 Clear Anodize KEFSH6-3060 4000 585 6.45x104 21.53x104

[ ! ]Effective length of 4000mm indicates extrusions with an effective length of 4000mm or more. The actual length including marginal grip is more than 4000mm (several dozen mm). Fixed Length Extrusions must be cut by users thus the exact length cannot be specified.

Alterations

Aluminum Extrusion 6 Series/slot width 8/30x60mm:Related Image
By using MISUMI's Long Aluminum Frame specification from the following additions, the high structure reassembling is freely possible.
Depending on classifications and sizes, there are some inapplicable frames.
For more information, please read the inapplicable listed on each page description table.
Inside the page description table, the items with "-" mark indicates the inapplicable.
CategoryAlteration NamesCodesExplanationsCatalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling ServiceP2-755&756
End TappingEnd Tapping on Center HoleLTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends.P2-757
End Tapping 4 Corner HolesLSP/RSP/SPWP2-768
Specify How to CutPrecision CutSCChange total length tolerance. (L±0.5→L±0.2)
[ ! ]Available only for L≦1500
P2-758
45 deg CutL_T45/R_T45Cut at 45 deg angle. 
Wrench Access HolesWrench Access Hole at Fixed PositionLWP/RWPAdd wrench access holes at fixed position for blind joints. P2-759&760
Wrench Access Hole at Specified PositionAH/BH/AV/BVAdd wrench access holes at specified position for blind joints.P2-761&762
CounterboresCounterbores at Specified PositionZ6/XA100Add counterbores at specified position. Use the holes for connecting the frames and a table top.P2-763
Holes for Specific Blind Joint TypeD HoleLDH/RDHAdd holes needed for Single Joint connection.P2-764
S HoleLSH/RSHAdd holes needed for pre-assembly double joint connection.P2-765
M HoleLMH/RMHAdd holes needed for post-assembly double joint connection.P2-766
L HoleJLP/KLPAdd holes needed for parallel joint connection. P2-767
Other AlterationsGNFS/GFS Series End TappingLTS/RTS/TSWAdd end tappings on high rigidity frames.P2-768
HFSR Series End TappingLTS/RTS/TSWAdd end tappings needed for adding a protection cover on the end fo HFSR series frame.

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
EFSH6-3060-[50-4000/0.5]
HFSH6-3060-[50-4000/0.5]
KEFSH6-3060-4000
KHFSH6-3060-4000
Part NumberVolume DiscountDays to ShipRoHSExtrusion Type_ L Dimension Fixed, Specified Overall Length L (Effective Length)
(mm)
Overall Length L
(mm)
6 Day(s) or more 10EFS (Lightweight)Configurable-50 ~ 4000
6 Day(s) or more 10HFS (Standard)Configurable-50 ~ 4000
Available 9 Day(s) or more 10EFS (Lightweight)Stationary4000-
Available 9 Day(s) or more 10HFS (Standard)Stationary4000-

Loading...

  1. 1
 

Basic Information

Standard Extrusion Size(mm) 30 Extrusion Size 30x60 Extrusion Series 6 Series
Extrusion Type Rectangle Shape Number of Extrusion Slots 1 Slot x 2 Slots Surface Treatment Clear Anodize
Number of Slotted Surfaces Two-Side Slots (Opposed) Surface Milled Not Provided Material A6N01SS-T5
Extrusion Size: Width (A)(mm) 30 Extrusion Size: Thickness (T)(mm) 60

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation
TEL:124- 468-8841 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)