Specification Table

Part Number	—	T
NHXCS8	—	3

Part Number		T	d₁	d₂	Accessory: Included Flat Head Screw		Attraction Force N [kgf]	Surface Magnetic Flux Density Gauss [G]	Specifications
Type	A	T	d₁	d₂	M (Coarse) - Length	Pitch	Attraction Force N [kgf]	Surface Magnetic Flux Density Gauss [G]	NHXCS	NHXCSH
(Square) NHXCS NHXCSH	8	2	5.5	3	M2.5−6	0.45	10.8 {1.1}	2900 to 3200	●	●
		3	5.5	3.0	M2.5−6	0.45	16.6 {1.7}	3200 to 3600	●	●
		4	5.5	3.0	M2.5−8	0.45	18.6 {1.9}	3600 to 3900	●	—
	10	3	6.5	3.5	M3−8	0.5	22.5 {2.3}	3400 to 3700	●	●
		4	6.5	3.5	M3−8	0.5	24.5 {2.5}	3900 to 4100	●	●
		5	6.5	3.5	M3−10	0.5	31.3 {3.2}	4000 to 4300	●	—
	12	3	6.5	3.5	M3−8	0.5	24.5 {2.5}	3200 to 3500	●	●
		4.5	6.5	3.5	M3−8	0.5	27.4 {2.8}	3900 to 4200	●	●
		6	6.5	3.5	M3−10	0.5	37.2 {3.8}	4000 to 4300	●	—
	15	3	9	4.8	M4−10	0.7	39.2 {4}	3200 to 3500	●	●
		4	9	4.8	M4−10	0.7	43.1 {4.4}	3500 to 3800	●	—
		5	9	4.8	M4−10	0.7	54.8 {5.6}	3900 to 4200	●	●
	20	4	11	5.8	M5−12	0.8	47.0 {4.8}	2900 to 3200	●	●
		5.5	11	5.8	M5−12	0.8	78.4 {8.0}	3600 to 4000	●	●
		6	11	5.8	M5−12	0.8	81.3 {8.3}	3600 to 4000	●	—
	25	4	13	7.0	M6−15	1.0	58.8 {6.0}	2800 to 3100	●	●
		5	13	7.0	M6−15	1.0	86.2 {8.8}	3300 to 3500	●	—
		6	13	7.0	M6−15	1.0	98.0 {10.0}	3600 to 4000	●	●
	30	5	13	7.0	M6−15	1.0	122.5 {12.5}	2800 to 3200	●	—
	30	6	13	7.0	M6−15	1.0	129.4 {13.2}	3100 to 3400	●	—

[ ! ] Attraction Force and Surface Flux Density are reference values for magnets alone.

■Tightening Torque (Reference Value)
Magnets - Countersunk

Tightening Torque (Value for Reference)
A Dimension of Magnet	Included Flat Head Screw	N⋅m
8	M2.5−6	0.2
10	M3−8	0.6
12	M3−8	0.6
15	M4−10	1.4
20	M5−12	2.9
25	M6−15	5.0
30	M6−15	5.0

[ ! ] Tightening beyond the specified torques may cause the magnet breakage.

■Installation Precautions
·Place a magnet on flat surface. (Illustration B)
·Please make sure that there is no misalignment between magnet holes and tapped holes. (Illustration C)
·Please make sure that there is no dust before installing flat head screws. (Illustration D)

Type	[M] Material	Heat Resistant Temperature	[S] Surface Treatment
NHXCS	Neodymium Magnet	80°C	Nickel Plating
NHXCSH	Heat-resisting Neodymium Magnet	150°C	Nickel Plating

Magnet - Countersunk - Square Type

Caution

Product Description

Dimensional Drawing