Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded)
Brand :
MISUMI
Caution
Product Description
- Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Threaded) from MISUMI.
- SUS440C or 13Cr stainless has an identification groove on D part.
- A machining step remains on the shoulder top for Diamond Shape.
- SUS304 may not be polished and may have no centering hole.
- You can specify shoulder type flange thickness and flange diameter. It is attached with a male thread.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
[ ! ]SUS440C or 13Cr stainless has an identification groove on D part.
[ ! ]A machining step remains on the shoulder top for Diamond Shape.
[ ! ]SUS304 may not be polished and may have no centering hole.
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |||
| Shoulder Thickness Configurable | Shoulder Diameter and Thickness Configurable | ||||||
| Round | Diamond | Round | Diamond | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | FPNAT | FPNDT | FPNATD | FPNDTD |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV~ | GFPNAT | GFPNDT | GFPNATD | GFPNDTD |
| (3) | SUS304 | - | - | SFPNAT | SFPNDT | SFPNATD | SFPNDTD |
| (4) | SUS304 | Hard Chrome Plating | Plating Hardness: 750HV~ | HFPNAT | HFPNDT | HFPNATD | HFPNDTD |
| (5) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | CFPNAT | CFPNDT | CFPNATD | CFPNDTD |