Due to an increase in demand, the lead time of some of the electrical items from our eCatalogue has increased abnormally and may cause delays in delivery or order suspension. We apologize for the inconvenience and appreciate your kind understanding. Once the supply will get normalized, we will update the same.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(42 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

RSPJW6-[20-500/1]-M3-N3

Material Shaft Dia. D Length L Hardness Add Wrench Flats at One Location [SC] Change Tapped Thread M to Tapered One [MT] 1(RC1/8) 2(RC1/4) 3(RC3/8) Change Tapped Thread N to Tapered One [NT] 1(RC1/8) 2(RC1/4) 3(RC3/8) Tapped (Coarse) [M] Tapped (Coarse) [N] type Surface Treatment CAD Days to Ship

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
- Stainless Steel
  - SUS440C or 13Cr stainless
Clear
Shaft Dia. D(Ø)
6

8

10

12

13

16

20

25

30

35

40

50
Clear
Length L(mm)
[20-500/1mm Unit(s)]
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
Clear
Add Wrench Flats at One Location [SC](mm)
[0-500/1mm Unit(s)]
Clear
Change Tapped Thread M to Tapered One [MT] 1(RC1/8) 2(RC1/4) 3(RC3/8)
1

2

3
Clear
Change Tapped Thread N to Tapered One [NT] 1(RC1/8) 2(RC1/4) 3(RC3/8)
1

2

3
Clear
Tapped (Coarse) [M](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse) [N](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
type
- PSPJW
- PSPWR
- RSPJW
- RSPWR
- SPJW
- SPWR
- SSPJW
- SSPWR
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

8 Day(s) or Less

10 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Shafts - Both Ends Tapped Hollow Shafts - Not applicable to Both Ends Tapped Hollow Shafts / Both Ends Tapped Hollow with Wrench Flats

Name: Shafts - Both Ends Tapped Hollow Shafts - Not applicable to Both Ends Tapped Hollow Shafts / Both Ends Tapped Hollow with Wrench Flats
Brand: MISUMI

Brand :

MISUMI

Part Number :

RSPJW6-[20-500/1]-M3-N3

RSPJW8-[20-500/1]-M[4,5]-N[4,5]

RSPJW10-[20-500/1]-M[5,6]-N[5,6]

RSPJW12-[32-500/1]-M8-N8

RSPJW12-[32-500/1]-M8-NT1

RSPJW12-[32-500/1]-MT1-N8

RSPJW12-[32-500/1]-MT1-NT1

RSPJW13-[40-500/1]-M10-N10

RSPJW13-[40-500/1]-M10-NT1

RSPJW13-[40-500/1]-MT1-N10

RSPJW13-[40-500/1]-MT1-NT1

RSPJW16-[48-500/1]-M12-N12

RSPJW16-[48-500/1]-M12-NT2

RSPJW16-[48-500/1]-MT2-N12

RSPJW16-[48-500/1]-MT2-NT2

RSPJW20-[64-500/1]-M16-N16

RSPJW20-[64-500/1]-M16-NT3

RSPJW20-[64-500/1]-MT3-N16

RSPJW20-[64-500/1]-MT3-NT3

RSPJW25-[80-500/1]-M20-N20

RSPJW6-[20-500/1]-M3-N3

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

"[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."

Hollow with Wrench Flats/Both Ends Tapped:Related Image

[ ! ]About Hollow Shaft Wall Thickness Deviations, please see >> P.111

[ ! ]Features of Low Temp. Black Chrome Plating
>>P.128
[ ! ]Circularity and O.D. tolerance may not meet precision specification in areas approximately 15mm from wrench flats machined ends.
[ ! ]Circularity, Straightness, Perpendicularity and Changes in Hardness >>P.111
[ ! ]Low temp. black chrome plating is not applied to the inside of hollow shafts, taps, bored holes and lateral holes, and may rust.
[ ! ]Annealing required for wrench flats machining and shaft end threading (effective thread length + approx. 10mm) may lower hardness. >>P.112

Type		[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
Both Ends Tapped	Both Ends Tapped with Wrench Flats	[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
SPJW	SPWR	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardened >>P.112 SUJ2 Equivalent 58HRC~ SUS440C or 13Cr stainless 56HRC~	-
SSPJW	SSPWR	SUS440C or 13Cr stainless		-
PSPJW	PSPWR	SUJ2 Equivalent		Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More
RSPJW	RSPWR	SUJ2 Equivalent		Low Temp. Black Chrome Plating

Specifications

• Both Ends Tapped Hollow Shafts

Part Number	-	L	-	M	-	N	-	SC
SPJW20 SPWR30	- -	500 680	- -	M16 M20	- -	N16 N20	-	SC10

■Both Ends Tapped Hollow Shafts

Part Number		L 1mm Increment	M (Coarse Thread) N (Coarse Thread)				D Tol.	d	C
Type	D	L 1mm Increment	M (Coarse Thread) N (Coarse Thread)				D Tol.	d	C
Both Ends Tapped Hollow Shafts SPJW SSPJW (* marked sizes only) PSPJW	6	20~600	3				-0.004 -0.012	2	0.5 or Less
	*8	20~800 (300)	4	*5			-0.005 -0.014	3(3)	0.5 or Less
	*10	20~800 (400)	5	*6			-0.005 -0.014	4(4)	0.5 or Less
	*12	32~1000 (500)		*8	*T1 (RC1/8)		-0.006 -0.017	6(5)	0.5 or Less
	*13	40~1000 (500)		*10	*T1 (RC1/8)		-0.006 -0.017	7(5)	0.5 or Less
	*16	48~1200 (600)		*12	*T2 (RC1/4)		-0.006 -0.017	10(6)	0.5 or Less
	*20	64~1200 (800)		*16	*T3 (RC3/8)		-0.007 -0.020	14(8)	1.0 or Less
	*25	80~1200 (1000)		*20			-0.007 -0.020	16(10)	1.0 or Less
	*30	80~1500 (1000)		*20			-0.007 -0.020	17(12)	1.0 or Less
	35	96~1500			24		-0.009 -0.025	19	1.0 or Less
	40	96~1500			24	30	-0.009 -0.025	20	1.0 or Less
	50	120~1500				30	-0.009 -0.025	26	1.0 or Less

Part Number		L 1mm Increment	M (Coarse Thread) N (Coarse Thread)			D Tol.	d	C
Type	D	L 1mm Increment	M (Coarse Thread) N (Coarse Thread)			D Tol.	d	C
Both Ends Tapped Hollow Shafts Low Temp. Black Chrome Plating RSPJW	6	20~500	3			-0.004 -0.012	2	0.5 or Less
	8	20~500	4	5		-0.005 -0.014	3	0.5 or Less
	10	20~500	5	6		-0.005 -0.014	4	0.5 or Less
	12	32~500		8	T1 (RC1/8)	-0.006 -0.017	6	0.5 or Less
	13	40~500		10	T1 (RC1/8)	-0.006 -0.017	7	0.5 or Less
	16	48~500		12	T2 (RC1/4)	-0.006 -0.017	10	0.5 or Less
	20	64~500		16	T3 (RC3/8)	-0.007 -0.020	14	1.0 or Less
	25	80~500		20		-0.007 -0.020	16	1.0 or Less
	30	80~500		20		-0.007 -0.020	17	1.0 or Less

Part Number		L 1mm Increment	M (Coarse Thread), N (Coarse Thread)				Wrench Flats Dimensions			D Tol.	d	C
Type	D	L 1mm Increment	M (Coarse Thread), N (Coarse Thread)				SC	W	ℓ₁	D Tol.	d	C
Both Ends Tapped Hollow Shafts with Wrench Flats SPWR SSPWR (* marked sizes only) PSPWR	6	20~600	3				SC=1mm Increment [ ! ]When D≤25 SC+ℓ₁≤L-Nx2 SC≥Mx2 [ ! ]When D≥30 SC+ℓ₁≤L SC≥0 [ ! ]Details of Wrench Flats P.112	5	8	-0.004 -0.012	2	0.5 or Less
	* 8	20~800 (300)	4	* 5				7	8	-0.005 -0.014	3 (3)	0.5 or Less
	* 10	20~800 (400)	5	* 6				8	8	-0.005 -0.014	4 (4)	0.5 or Less
	* 12	32~1000 (500)		* 8	*T1 (RC1/8)			10	10	-0.006 -0.017	6 (5)	0.5 or Less
	* 13	40~1000 (500)		* 10	*T1 (RC1/8)			11	10	-0.006 -0.017	7 (5)	0.5 or Less
	* 16	48~1200 (600)		* 12	*T2 (RC1/4)			14	10	-0.006 -0.017	10 (6)	0.5 or Less
	* 20	64~1200 (800)		* 16	*T3 (RC3/8)			17	10	-0.007 -0.020	14 (8)	1.0 or Less
	* 25	80~1200 (1000)		* 20				22	10	-0.007 -0.020	16 (10)	1.0 or Less
	* 30	80~1500 (1000)		* 20				27	15	-0.007 -0.020	17 (12)	1.0 or Less
	35	96~1500			24			30	15	-0.009 -0.025	19	1.0 or Less
	40	96~1500			24	30		36	20	-0.009 -0.025	20	1.0 or Less
	50	120~1500				30		41	20	-0.009 -0.025	26	1.0 or Less

Part Number		L 1mm Increment	M (Coarse Thread), N (Coarse Thread)			Wrench Flats Dimensions			D Tol.	d	C
Type	D	L 1mm Increment	M (Coarse Thread), N (Coarse Thread)			SC	W	ℓ₁	D Tol.	d	C
Both Ends Tapped Hollow Shafts with Wrench Flats Low Temp. Black Chrome Plating RSPWR	6	20~500	3			SC=1mm Increment [ ! ]When D≤25 SC+ℓ₁≤L-Nx2 SC≥Mx2 [ ! ]When D≥30 SC+ℓ₁≤L SC≥0 [ ! ]Details of Wrench Flats P.112	5	8	-0.004 -0.012	2	0.5 or Less
	8	20~500	4	5			7	8	-0.005 -0.014	3	0.5 or Less
	10	20~500	5	6			8	8	-0.005 -0.014	4	0.5 or Less
	12	32~500		8	T1 (RC1/8)		10	10	-0.006 -0.017	6	0.5 or Less
	13	40~500		10	T1 (RC1/8)		11	10	-0.006 -0.017	7	0.5 or Less
	16	48~500		12	T2 (RC1/4)		14	10	-0.006 -0.017	10	0.5 or Less
	20	64~500		16	T3 (RC3/8)		17	10	-0.007 -0.020	14	1.0 or Less
	25	80~500		20			22	10	-0.007 -0.020	16	1.0 or Less
	30	80~500		20			27	15	-0.007 -0.020	17	1.0 or Less

[ ! ]When T1, T2 or T3 is selected as M or N, tapered thread machining is applied. (Ordering Code: MT1, NT1) [ ! ]L requires Mx2+Nx2≤L.
[ ! ]When Mx25+4+Nx2.5+4≤L, tap pilot holes may go through. [ ! ]When L≤Mx2+Nx2, effective depth of larger diameter tap has priority.
[ ! ]Only * marked D, M and N dimensions are applicable to Stainless Steel Shafts. L and d dimensions in ( ) are applicable.

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
RSPJW6-[20-500/1]-M3-N3
RSPJW8-[20-500/1]-M[4,5]-N[4,5]
RSPJW10-[20-500/1]-M[5,6]-N[5,6]
RSPJW12-[32-500/1]-M8-N8
RSPJW12-[32-500/1]-M8-NT1
RSPJW12-[32-500/1]-MT1-N8
RSPJW12-[32-500/1]-MT1-NT1
RSPJW13-[40-500/1]-M10-N10
RSPJW13-[40-500/1]-M10-NT1
RSPJW13-[40-500/1]-MT1-N10
RSPJW13-[40-500/1]-MT1-NT1
RSPJW16-[48-500/1]-M12-N12
RSPJW16-[48-500/1]-M12-NT2
RSPJW16-[48-500/1]-MT2-N12
RSPJW16-[48-500/1]-MT2-NT2
RSPJW20-[64-500/1]-M16-N16
RSPJW20-[64-500/1]-M16-NT3
RSPJW20-[64-500/1]-MT3-N16
RSPJW20-[64-500/1]-MT3-NT3
RSPJW25-[80-500/1]-M20-N20
RSPJW30-[80-500/1]-M20-N20
RSPWR6-[20-500/1]-M3-N3-SC[6-500/1]
RSPWR8-[20-500/1]-M[4,5]-N[4,5]-SC[8-500/1]
RSPWR10-[20-500/1]-M[5,6]-N[5,6]-SC[10-500/1]
RSPWR12-[32-500/1]-M8-N8-SC[16-500/1]
RSPWR12-[32-500/1]-M8-NT1-SC[16-500/1]
RSPWR12-[32-500/1]-MT1-N8-SC[16-500/1]
RSPWR12-[32-500/1]-MT1-NT1-SC[16-500/1]
RSPWR13-[40-500/1]-M10-N10-SC[20-500/1]
RSPWR13-[40-500/1]-M10-NT1-SC[20-500/1]
RSPWR13-[40-500/1]-MT1-N10-SC[20-500/1]
RSPWR13-[40-500/1]-MT1-NT1-SC[20-500/1]
RSPWR16-[48-500/1]-M12-N12-SC[20-500/1]
RSPWR16-[48-500/1]-M12-NT2-SC[20-500/1]
RSPWR16-[48-500/1]-MT2-N12-SC[20-500/1]
RSPWR16-[48-500/1]-MT2-NT2-SC[20-500/1]
RSPWR20-[64-500/1]-M16-N16-SC[32-500/1]
RSPWR20-[64-500/1]-M16-NT3-SC[32-500/1]
RSPWR20-[64-500/1]-MT3-N16-SC[32-500/1]
RSPWR20-[64-500/1]-MT3-NT3-SC[32-500/1]
RSPWR25-[80-500/1]-M20-N20-SC[40-500/1]
RSPWR30-[80-500/1]-M20-N20-SC[0-500/1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Material	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Hardness	Add Wrench Flats at One Location [SC] (mm)	Change Tapped Thread M to Tapered One [MT] 1(RC1/8) 2(RC1/4) 3(RC3/8)	Change Tapped Thread N to Tapered One [NT] 1(RC1/8) 2(RC1/4) 3(RC3/8)	Tapped (Coarse) [M] (mm)	Tapped (Coarse) [N] (mm)
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	6	20 ～ 500	Induction Hardened (58HRC~)	-	-	-	3	3
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	8	20 ～ 500	Induction Hardened (58HRC~)	-	-	-	4 ～ 5	4 ～ 5
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	10	20 ～ 500	Induction Hardened (58HRC~)	-	-	-	5 ～ 6	5 ～ 6
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	12	32 ～ 500	Induction Hardened (58HRC~)	-	-	-	8	8
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	12	32 ～ 500	Induction Hardened (58HRC~)	-	-	1	8	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	12	32 ～ 500	Induction Hardened (58HRC~)	-	1	-	-	8
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	12	32 ～ 500	Induction Hardened (58HRC~)	-	1	1	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	13	40 ～ 500	Induction Hardened (58HRC~)	-	-	-	10	10
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	13	40 ～ 500	Induction Hardened (58HRC~)	-	-	1	10	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	13	40 ～ 500	Induction Hardened (58HRC~)	-	1	-	-	10
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	13	40 ～ 500	Induction Hardened (58HRC~)	-	1	1	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	16	48 ～ 500	Induction Hardened (58HRC~)	-	-	-	12	12
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	16	48 ～ 500	Induction Hardened (58HRC~)	-	-	2	12	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	16	48 ～ 500	Induction Hardened (58HRC~)	-	2	-	-	12
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	16	48 ～ 500	Induction Hardened (58HRC~)	-	2	2	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	20	64 ～ 500	Induction Hardened (58HRC~)	-	-	-	16	16
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	20	64 ～ 500	Induction Hardened (58HRC~)	-	-	3	16	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	20	64 ～ 500	Induction Hardened (58HRC~)	-	3	-	-	16
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	20	64 ～ 500	Induction Hardened (58HRC~)	-	3	3	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	25	80 ～ 500	Induction Hardened (58HRC~)	-	-	-	20	20
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	30	80 ～ 500	Induction Hardened (58HRC~)	-	-	-	20	20
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	6	20 ～ 500	Induction Hardened (58HRC~)	6 ～ 500	-	-	3	3
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	8	20 ～ 500	Induction Hardened (58HRC~)	8 ～ 500	-	-	4 ～ 5	4 ～ 5
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	10	20 ～ 500	Induction Hardened (58HRC~)	10 ～ 500	-	-	5 ～ 6	5 ～ 6
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	12	32 ～ 500	Induction Hardened (58HRC~)	16 ～ 500	-	-	8	8
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	12	32 ～ 500	Induction Hardened (58HRC~)	16 ～ 500	-	1	8	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	12	32 ～ 500	Induction Hardened (58HRC~)	16 ～ 500	1	-	-	8
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	12	32 ～ 500	Induction Hardened (58HRC~)	16 ～ 500	1	1	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	13	40 ～ 500	Induction Hardened (58HRC~)	20 ～ 500	-	-	10	10
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	13	40 ～ 500	Induction Hardened (58HRC~)	20 ～ 500	-	1	10	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	13	40 ～ 500	Induction Hardened (58HRC~)	20 ～ 500	1	-	-	10
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	13	40 ～ 500	Induction Hardened (58HRC~)	20 ～ 500	1	1	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	16	48 ～ 500	Induction Hardened (58HRC~)	20 ～ 500	-	-	12	12
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	16	48 ～ 500	Induction Hardened (58HRC~)	20 ～ 500	-	2	12	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	16	48 ～ 500	Induction Hardened (58HRC~)	20 ～ 500	2	-	-	12
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	16	48 ～ 500	Induction Hardened (58HRC~)	20 ～ 500	2	2	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	20	64 ～ 500	Induction Hardened (58HRC~)	32 ～ 500	-	-	16	16
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	20	64 ～ 500	Induction Hardened (58HRC~)	32 ～ 500	-	3	16	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	20	64 ～ 500	Induction Hardened (58HRC~)	32 ～ 500	3	-	-	16
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	20	64 ～ 500	Induction Hardened (58HRC~)	32 ～ 500	3	3	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	25	80 ～ 500	Induction Hardened (58HRC~)	40 ～ 500	-	-	20	20
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Low Temperature Black Chrome Plating	30	80 ～ 500	Induction Hardened (58HRC~)	0 ～ 500	-	-	20	20

Example

Product TOP

Basic Information

Basic Shape	Hollow	End Shape (Left)	Tapped	End Shape (Right)	Tapped
Heat Treatment	Induction Hardened	Shaft Fit Tolerance	g6

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand

Search by Category

How can we improve?