Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(818 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

PSFAB8-[25-796/1]-F[2-24/1]-P6-M3-T[2-56/1]-S[0-53/1]-Q[3,4,5,6,8]

End Shape (Left) Material Heat Treatment Surface Treatment Shaft Dia. D Length L Shaft Fit Tolerance Hardness Change Thread Q to Fine One [QMC] Change Thread Q to Fine One [QMS] F P S T Threaded (Coarse) [M] Threaded (Coarse) [Q] type CAD Days to Ship

Specification/Dimensions

End Shape (Left)
- No Machining
- Tapped
Clear
Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1496/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Change Thread Q to Fine One [QMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
Change Thread Q to Fine One [QMS](mm)
10

12

14

17

18
Clear
F(mm)
[2-188/1mm Unit(s)]
Clear
P(mm)
6
[3-47/1mm Unit(s)]
Clear
S(mm)
[0-205/1mm Unit(s)]
Clear
T(mm)
[2-210/1mm Unit(s)]
Clear
Threaded (Coarse) [M](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Threaded (Coarse) [Q](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
type
- PSFAB
- PSFGB
- PSFNB
- PSFUA
- PSFUB
- PSNGB
- PSSFAB
- PSSFGB
- PSSFNB
- PSSFUA
- PSSFUB
- PSSNGB
- RSFAB
- RSFNB
- SFAB
- SFNB
- SFUA
- SFUB
- SSFAB
- SSFNB
- SSFUA
- SSFUB
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

8 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Linear Shafts-One End Stepped and Tapped, One End Threaded / One End Stepped, One End Threaded

Name: Linear Shafts-One End Stepped and Tapped, One End Threaded / One End Stepped, One End Threaded
Brand: MISUMI
Availability: PreOrder

Brand :

MISUMI

Part Number :

PSFAB8-[25-796/1]-F[2-24/1]-P6-M3-T[2-56/1]-S[0-53/1]-Q[3,4,5,6,8]

PSFAB8-[25-796/1]-F[2-24/1]-P6-M3-T[2-56/1]-S[0-53/1]-QMC[3,4,5,6,8]

PSFAB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-70/1]-S[0-67/1]-Q[4,5,6,8,10]

PSFAB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-70/1]-S[0-67/1]-QMC[4,5,6,8,10]

PSFAB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-70/1]-S[0-67/1]-QMS10

PSFAB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-84/1]-S[0-84/1]-Q[5,6,8,10,12]

PSFAB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-84/1]-S[0-84/1]-QMC[5,6,8,10,12]

PSFAB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-84/1]-S[0-84/1]-QMS[10,12]

PSFAB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-84/1]-S[0-79/1]-Q[5,6,8,10,12]

PSFAB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-84/1]-S[0-79/1]-QMC[5,6,8,10,12]

PSFAB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-84/1]-S[0-79/1]-QMS[10,12]

PSFAB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-T[2-84/1]-S[0-79/1]-Q[5,6,8,10,12]

PSFAB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-T[2-84/1]-S[0-79/1]-QMC[5,6,8,10,12,15]

PSFAB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-T[2-84/1]-S[0-79/1]-QMS[10,12,14]

PSFAB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-112/1]-S[0-107/1]-Q[5,6,8,10,12,16]

PSFAB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-112/1]-S[0-107/1]-QMC[5,6,8,10,12,15]

PSFAB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-112/1]-S[0-107/1]-QMS[10,12,14]

PSFAB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,5,6,8,10,12]-T[2-112/1]-S[0-107/1]-Q[5,6,8,10,12,16]

PSFAB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,5,6,8,10,12]-T[2-112/1]-S[0-107/1]-QMC[5,6,8,10,12,15,17]

PSFAB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,5,6,8,10,12]-T[2-112/1]-S[0-107/1]-QMS[10,12,14,18]

PSFAB8-[25-796/1]-F[2-24/1]-P6-M3-T[2-56/1]-S[0-53/1]-Q[3,4,5,6,8]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features] One end stepped, one end male thread type shaft (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

One End Stepped/One End Threaded:Related Image

Type						[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
One End Stepped and Tapped One End Threaded			One End Stepped, One End Threaded
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. h5	D Tol. f8
SFAB	SFUA	-	SFNB	SFUB	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless : 56HRC~	-
SSFAB	SSFUA	-	SSFNB	SSFUB	-	SUS440C or 13Cr stainless		-
PSFAB	PSFUA	-	PSFNB	PSFUB	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More ~
PSSFAB	PSSFUA	-	PSSFNB	PSSFUB	-	SUS440C or 13Cr stainless
RSFAB	-	-	RSFNB	-	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGB	-	-	PSNGB	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More ~
-	-	PSSFGB	-	-	PSSNGB	SUS304	-

[ ! ]Shaft End Machined Area (Effective Thread Length + Approx. 10mm)Annealing may lower hardness.
[ ! ] L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ] Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	F	-	P	-	M	-	T	-	S	-	Q
SFNB20 SFAB20	- -	400 400	- -	F25 F25	- -	P16 P16	-	M10	- -	T35 T35	- -	S25 S25	- -	Q16 Q16

Part Number			1mm Increment					M (Coarse) Selection											Q Selection											D Tol.			(Y)Max.	R	C
Type		D	L	F	T	S	P	M (Coarse) Selection											Q Selection											g6	h5	f8	(Y)Max.	R	C
One End Stepped and Tapped One End Threaded		8	25~996	2≤F≤Px4	2≤T≤Qx5	(When Q≤6) S≤T-2 (When Q=8, 10) S≤T-3 (When Q≥12) S≤T-5 (W/o Threads) S=0 [ ! ]S=0 is only applicable to One End Stepped and Tapped One End Threaded. [ ! ]S≥Pitchx3	6	3											3	4	5	6	8							-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
One End Stepped and Tapped One End Threaded		10	25~996				6~8	3	4	5										4	5	6	8	10						-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
(D Tol. g6) SFAB SSFAB PSFAB PSSFAB RSFAB	(D Tol. h5) SFUA SSFUA PSFUA PSSFUA	12	25~1196				6~10	3	4	5	6										5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~1196				6~11	3	4	5	6	8									5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~1196				6~13	3	4	5	6	8	10								5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1196				6~14	3	4	5	6	8	10								5	6	8	10	12	16				-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1196				8~16		4	5	6	8	10	12							5	6	8	10	12	16				-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1196				8~17		4	5	6	8	10	12								6	8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
(D≤30,L≤500,Ymax.≤800) (D Tol. f8) PSFGB PSSFGB		25	25~1196				8~22		4	5	6	8	10	12	16								8	10	12	16	20	24		-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1496				9~27			5	6	8	10	12	16	20	24						8	10	12	16	20	24	30	-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1496				9~32			5	6	8	10	12	16	20	24							10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	25~1496				11~37				6	8	10	12	16	20	24	30							12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	25~1496				11~47				6	8	10	12	16	20	24	30								16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Part Number			1mm Increment					Q Selection											D Tol.			(Y)Max.	R	C
Type		D	L	F	T	S	P	Q Selection											g6	h5	f8	(Y)Max.	R	C
One End Stepped, One End Threaded		8	25~ 796	2≤F≤Px4	2≤T≤Qx5	(When Q≤6) S≤T-2 (When Q=8, 10) S≤T-3 (When Q≥12) S≤T-5 [ ! ]S≥Pitchx3	6	3	4	5	6	8							-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
One End Stepped, One End Threaded		10	25~ 796				6~8		4	5	6	8	10						-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
(D Tol. g6) SFNB SSFNB PSFNB PSSFNB RSFNB	(D Tol. h5) SFUB SSFUB PSFUB PSSFUB	12	25~ 996				6~10			5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~ 996				6~11			5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~ 996				6~13			5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1196				6~14			5	6	8	10	12	16				-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1196				8~16			5	6	8	10	12	16				-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1196				8~17				6	8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
(D≤30,L≤500,Ymax.≤800) (D Tol. f8) PSNGB PSSNGB		25	25~1196				8~22					8	10	12	16	20	24		-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1496				9~27					8	10	12	16	20	24	30	-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1496				9~32						10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	25~1496				11~37							12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	25~1496				11~47								16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Coarse Thread Dimensions
M	Pitch
3	0.5
4	0.7
5	0.8
6	1.0
8	1.25
10	1.5
12	1.75
16	2.0
20	2.5
24	3.0
30	3.5

Part Number		1mm Increment					M (Coarse) Selection										Q Selection											D Tol.	(Y)Max.	R	C
Type	D	L	F	T	S	P	M (Coarse) Selection										Q Selection											g6	(Y)Max.	R	C
One End Stepped and Tapped One End Threaded	8	25~500	2≤F≤Px4	2≤T≤Qx5	(When Q≤6) S≤T-2 (When Q=8, 10) S≤T-3 (When Q≥12) S≤T-5 (W/o Threads) S=0 [ ! ]S=0 is only applicable to One End Stepped and Tapped One End Threaded. [ ! ]S≥Pitchx3	6	3										3	4	5	6	8							-0.005 -0.014	800	0.3 or Less	0.5 or Less
One End Stepped and Tapped One End Threaded	10	25~500				6~8	3	4	5									4	5	6	8	10						-0.005 -0.014	800	0.3 or Less	0.5 or Less
(D Tol. g6) Low Temp. Black Chrome Plating RSFAB (Ymax.≤800)	12	25~500				6~10	3	4	5	6									5	6	8	10	12					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500				6~11	3	4	5	6	8								5	6	8	10	12					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500				6~13	3	4	5	6	8	10							5	6	8	10	12					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500				6~14	3	4	5	6	8	10							5	6	8	10	12	16				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500				8~16		4	5	6	8	10	12						5	6	8	10	12	16				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500				8~17		4	5	6	8	10	12							6	8	10	12	16	20			-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500				8~22		4	5	6	8	10	12	16							8	10	12	16	20	24		-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500				9~27			5	6	8	10	12	16	20	24					8	10	12	16	20	24	30	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

Part Number		1mm Increment					Q Selection											D Tol.	(Y)Max.	R	C
Type	D	L	F	T	S	P	Q Selection											g6	(Y)Max.	R	C
One End Stepped, One End Threaded	8	25~500	2≤F≤Px4	2≤T≤Qx5	(When Q≤6) S≤T-2 (When Q=8, 10) S≤T-3 (When Q≥12) S≤T-5 [ ! ]S≥Pitchx3	6	3	4	5	6	8							-0.005 -0.014	800	0.3 or Less	0.5 or Less
One End Stepped, One End Threaded	10	25~500				6~8		4	5	6	8	10						-0.005 -0.014	800	0.3 or Less	0.5 or Less
(D Tol. g6) Low Temp. Black Chrome Plating RSFNB (Ymax.≤800)	12	25~500				6~10			5	6	8	10	12					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500				6~11			5	6	8	10	12					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500				6~13			5	6	8	10	12					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500				6~14			5	6	8	10	12	16				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500				8~16			5	6	8	10	12	16				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500				8~17				6	8	10	12	16	20			-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500				8~22					8	10	12	16	20	24		-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500				9~27					8	10	12	16	20	24	30	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

[ ! ] P dimensions require M+3≤P. [ ! ] L+F dimensions require Mx4 or more.
[ ! ] When D=Q, specify T=S as S dimensions. However, L and T dimensions have manufacturing priority and the S dimension will be T-(Pitchx2).

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
PSFAB8-[25-796/1]-F[2-24/1]-P6-M3-T[2-56/1]-S[0-53/1]-Q[3,4,5,6,8]
PSFAB8-[25-796/1]-F[2-24/1]-P6-M3-T[2-56/1]-S[0-53/1]-QMC[3,4,5,6,8]
PSFAB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-70/1]-S[0-67/1]-Q[4,5,6,8,10]
PSFAB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-70/1]-S[0-67/1]-QMC[4,5,6,8,10]
PSFAB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-70/1]-S[0-67/1]-QMS10
PSFAB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-84/1]-S[0-84/1]-Q[5,6,8,10,12]
PSFAB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-84/1]-S[0-84/1]-QMC[5,6,8,10,12]
PSFAB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-84/1]-S[0-84/1]-QMS[10,12]
PSFAB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-84/1]-S[0-79/1]-Q[5,6,8,10,12]
PSFAB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-84/1]-S[0-79/1]-QMC[5,6,8,10,12]
PSFAB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-84/1]-S[0-79/1]-QMS[10,12]
PSFAB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-T[2-84/1]-S[0-79/1]-Q[5,6,8,10,12]
PSFAB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-T[2-84/1]-S[0-79/1]-QMC[5,6,8,10,12,15]
PSFAB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-T[2-84/1]-S[0-79/1]-QMS[10,12,14]
PSFAB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-112/1]-S[0-107/1]-Q[5,6,8,10,12,16]
PSFAB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-112/1]-S[0-107/1]-QMC[5,6,8,10,12,15]
PSFAB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-112/1]-S[0-107/1]-QMS[10,12,14]
PSFAB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,5,6,8,10,12]-T[2-112/1]-S[0-107/1]-Q[5,6,8,10,12,16]
PSFAB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,5,6,8,10,12]-T[2-112/1]-S[0-107/1]-QMC[5,6,8,10,12,15,17]
PSFAB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,5,6,8,10,12]-T[2-112/1]-S[0-107/1]-QMS[10,12,14,18]
PSFAB20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12]-T[2-140/1]-S[0-135/1]-Q[6,8,10,12,16,20]
PSFAB20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12]-T[2-140/1]-S[0-135/1]-QMC[6,8,10,12,15,17,20]
PSFAB20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12]-T[2-140/1]-S[0-135/1]-QMS[10,12,14,18]
PSFAB25-[25-1196/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16]-T[2-110/1]-S[0-135/1]-Q[8,10,12,16,20,24]
PSFAB25-[25-1196/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16]-T[2-110/1]-S[0-135/1]-QMC[8,10,12,15,17,20,25]
PSFAB25-[25-1196/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16]-T[2-110/1]-S[0-135/1]-QMS[10,12,14,18]
PSFAB30-[25-1496/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20,24]-T[2-210/1]-S[0-205/1]-Q[8,10,12,16,20,24,30]
PSFAB30-[25-1496/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20,24]-T[2-210/1]-S[0-205/1]-QMC[8,10,12,15,17,20,25,30]
PSFAB30-[25-1496/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20,24]-T[2-210/1]-S[0-205/1]-QMS[10,12,14,18]
PSFAB35-[25-1496/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24]-T[2-210/1]-S[0-205/1]-Q[10,12,16,20,24,30]
PSFAB35-[25-1496/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24]-T[2-210/1]-S[0-205/1]-QMC[10,12,15,17,20,25,30]
PSFAB35-[25-1496/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24]-T[2-210/1]-S[0-205/1]-QMS[10,12,14,18]
PSFAB40-[25-1496/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30]-T[2-210/1]-S[0-205/1]-Q[12,16,20,24,30]
PSFAB40-[25-1496/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30]-T[2-210/1]-S[0-205/1]-QMC[12,15,17,20,25,30]
PSFAB40-[25-1496/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30]-T[2-210/1]-S[0-205/1]-QMS[12,14,18]
PSFAB50-[25-1496/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30]-T[2-210/1]-S[0-205/1]-Q[16,20,24,30]
PSFAB50-[25-1496/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30]-T[2-210/1]-S[0-205/1]-QMC[15,17,20,25,30]
PSFAB50-[25-1496/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30]-T[2-210/1]-S[0-205/1]-QMS[14,18]
PSFGB8-[25-796/1]-F[2-24/1]-P6-M3-T[2-56/1]-S[0-53/1]-Q[3,4,5,6,8]
PSFGB8-[25-796/1]-F[2-24/1]-P6-M3-T[2-56/1]-S[0-53/1]-QMC[3,4,5,6,8]
PSFGB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-70/1]-S[0-67/1]-Q[4,5,6,8,10]
PSFGB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-70/1]-S[0-67/1]-QMC[4,5,6,8,10]
PSFGB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-70/1]-S[0-67/1]-QMS10
PSFGB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-84/1]-S[0-79/1]-Q[5,6,8,10,12]
PSFGB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-84/1]-S[0-79/1]-QMC[5,6,8,10,12]
PSFGB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-84/1]-S[0-79/1]-QMS[10,12]
PSFGB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-84/1]-S[0-79/1]-Q[5,6,8,10,12]
PSFGB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-84/1]-S[0-79/1]-QMC[5,6,8,10,12]
PSFGB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-84/1]-S[0-79/1]-QMS[10,12]
PSFGB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-T[2-84/1]-S[0-84/1]-Q[5,6,8,10,12,16]
PSFGB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-T[2-84/1]-S[0-84/1]-QMC[5,6,8,10,12,15]
PSFGB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-T[2-84/1]-S[0-84/1]-QMS[10,12,14]
PSFGB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-112/1]-S[0-107/1]-Q[5,6,8,10,12,16]
PSFGB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-112/1]-S[0-107/1]-QMC[5,6,8,10,12,15]
PSFGB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-112/1]-S[0-107/1]-QMS[10,12,14]
PSFGB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,5,6,8,10,12]-T[2-112/1]-S[0-107/1]-Q[5,6,8,10,12,16]
PSFGB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,5,6,8,10,12]-T[2-112/1]-S[0-107/1]-QMC[5,6,8,10,12,15,17]
PSFGB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,5,6,8,10,12]-T[2-112/1]-S[0-107/1]-QMS[10,12,14,18]
PSFGB20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12]-T[2-140/1]-S[0-140/1]-Q[6,8,10,12,16,20]
PSFGB20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12]-T[2-140/1]-S[0-140/1]-QMC[6,8,10,12,15,17,20]

Price	Minimum Order Qty.	Days to Ship	RoHS	End Shape (Left)	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Change Thread Q to Fine One [QMC] (mm)	Change Thread Q to Fine One [QMS] (mm)	F (mm)	P (mm)	S (mm)	T (mm)	Threaded (Coarse) [M] (mm)	Threaded (Coarse) [Q] (mm)
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 796	g6	Induction Hardened (58HRC~)	-	-	2 ～ 24	6	0 ～ 53	2 ～ 56	3	3 ～ 8
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 796	g6	Induction Hardened (58HRC~)	3 ～ 8	-	2 ～ 24	6	0 ～ 53	2 ～ 56	3	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 796	g6	Induction Hardened (58HRC~)	-	-	2 ～ 32	6 ～ 8	0 ～ 67	2 ～ 70	3 ～ 5	4 ～ 10
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 796	g6	Induction Hardened (58HRC~)	4 ～ 10	-	2 ～ 32	6 ～ 8	0 ～ 67	2 ～ 70	3 ～ 5	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 796	g6	Induction Hardened (58HRC~)	-	10	2 ～ 32	6 ～ 8	0 ～ 67	2 ～ 70	3 ～ 5	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 996	g6	Induction Hardened (58HRC~)	-	-	2 ～ 40	6 ～ 10	0 ～ 84	2 ～ 84	3 ～ 6	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 996	g6	Induction Hardened (58HRC~)	5 ～ 12	-	2 ～ 40	6 ～ 10	0 ～ 84	2 ～ 84	3 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 996	g6	Induction Hardened (58HRC~)	-	10 ～ 12	2 ～ 40	6 ～ 10	0 ～ 84	2 ～ 84	3 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 996	g6	Induction Hardened (58HRC~)	-	-	2 ～ 44	6 ～ 11	0 ～ 79	2 ～ 84	3 ～ 8	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 996	g6	Induction Hardened (58HRC~)	5 ～ 12	-	2 ～ 44	6 ～ 11	0 ～ 79	2 ～ 84	3 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 996	g6	Induction Hardened (58HRC~)	-	10 ～ 12	2 ～ 44	6 ～ 11	0 ～ 79	2 ～ 84	3 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 996	g6	Induction Hardened (58HRC~)	-	-	2 ～ 52	6 ～ 13	0 ～ 79	2 ～ 84	3 ～ 10	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 996	g6	Induction Hardened (58HRC~)	5 ～ 15	-	2 ～ 52	6 ～ 13	0 ～ 79	2 ～ 84	3 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 996	g6	Induction Hardened (58HRC~)	-	10 ～ 14	2 ～ 52	6 ～ 13	0 ～ 79	2 ～ 84	3 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1196	g6	Induction Hardened (58HRC~)	-	-	2 ～ 56	6 ～ 14	0 ～ 107	2 ～ 112	3 ～ 10	5 ～ 16
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1196	g6	Induction Hardened (58HRC~)	5 ～ 15	-	2 ～ 56	6 ～ 14	0 ～ 107	2 ～ 112	3 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1196	g6	Induction Hardened (58HRC~)	-	10 ～ 14	2 ～ 56	6 ～ 14	0 ～ 107	2 ～ 112	3 ～ 10	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1196	g6	Induction Hardened (58HRC~)	-	-	2 ～ 56	6 ～ 16	0 ～ 107	2 ～ 112	4 ～ 12	5 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1196	g6	Induction Hardened (58HRC~)	5 ～ 17	-	2 ～ 56	6 ～ 16	0 ～ 107	2 ～ 112	4 ～ 12	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1196	g6	Induction Hardened (58HRC~)	-	10 ～ 18	2 ～ 56	6 ～ 16	0 ～ 107	2 ～ 112	4 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1196	g6	Induction Hardened (58HRC~)	-	-	2 ～ 68	8 ～ 17	0 ～ 135	2 ～ 140	4 ～ 12	6 ～ 20
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1196	g6	Induction Hardened (58HRC~)	6 ～ 20	-	2 ～ 68	8 ～ 17	0 ～ 135	2 ～ 140	4 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1196	g6	Induction Hardened (58HRC~)	-	10 ～ 18	2 ～ 68	8 ～ 17	0 ～ 135	2 ～ 140	4 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1196	g6	Induction Hardened (58HRC~)	-	-	2 ～ 88	8 ～ 22	0 ～ 135	2 ～ 110	4 ～ 16	8 ～ 24
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1196	g6	Induction Hardened (58HRC~)	8 ～ 25	-	2 ～ 88	8 ～ 22	0 ～ 135	2 ～ 110	4 ～ 16	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1196	g6	Induction Hardened (58HRC~)	-	10 ～ 18	2 ～ 88	8 ～ 22	0 ～ 135	2 ～ 110	4 ～ 16	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1496	g6	Induction Hardened (58HRC~)	-	-	2 ～ 108	9 ～ 27	0 ～ 205	2 ～ 210	5 ～ 24	8 ～ 30
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1496	g6	Induction Hardened (58HRC~)	8 ～ 30	-	2 ～ 108	9 ～ 27	0 ～ 205	2 ～ 210	5 ～ 24	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1496	g6	Induction Hardened (58HRC~)	-	10 ～ 18	2 ～ 108	9 ～ 27	0 ～ 205	2 ～ 210	5 ～ 24	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	35	25 ～ 1496	g6	Induction Hardened (58HRC~)	-	-	2 ～ 128	9 ～ 32	0 ～ 205	2 ～ 210	5 ～ 24	10 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	35	25 ～ 1496	g6	Induction Hardened (58HRC~)	10 ～ 30	-	2 ～ 128	9 ～ 32	0 ～ 205	2 ～ 210	5 ～ 24	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	35	25 ～ 1496	g6	Induction Hardened (58HRC~)	-	10 ～ 18	2 ～ 128	9 ～ 32	0 ～ 205	2 ～ 210	5 ～ 24	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	40	25 ～ 1496	g6	Induction Hardened (58HRC~)	-	-	2 ～ 148	11 ～ 37	0 ～ 205	2 ～ 210	6 ～ 30	12 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	40	25 ～ 1496	g6	Induction Hardened (58HRC~)	12 ～ 30	-	2 ～ 148	11 ～ 37	0 ～ 205	2 ～ 210	6 ～ 30	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	40	25 ～ 1496	g6	Induction Hardened (58HRC~)	-	12 ～ 18	2 ～ 148	11 ～ 37	0 ～ 205	2 ～ 210	6 ～ 30	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	50	25 ～ 1496	g6	Induction Hardened (58HRC~)	-	-	2 ～ 188	11 ～ 47	0 ～ 205	2 ～ 210	6 ～ 30	16 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	50	25 ～ 1496	g6	Induction Hardened (58HRC~)	15 ～ 30	-	2 ～ 188	11 ～ 47	0 ～ 205	2 ～ 210	6 ～ 30	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	50	25 ～ 1496	g6	Induction Hardened (58HRC~)	-	14 ～ 18	2 ～ 188	11 ～ 47	0 ～ 205	2 ～ 210	6 ～ 30	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	8	25 ～ 796	f8	No Induction Hardening	-	-	2 ～ 24	6	0 ～ 53	2 ～ 56	3	3 ～ 8
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	8	25 ～ 796	f8	No Induction Hardening	3 ～ 8	-	2 ～ 24	6	0 ～ 53	2 ～ 56	3	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	25 ～ 796	f8	No Induction Hardening	-	-	2 ～ 32	6 ～ 8	0 ～ 67	2 ～ 70	3 ～ 5	4 ～ 10
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	25 ～ 796	f8	No Induction Hardening	4 ～ 10	-	2 ～ 32	6 ～ 8	0 ～ 67	2 ～ 70	3 ～ 5	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	10	25 ～ 796	f8	No Induction Hardening	-	10	2 ～ 32	6 ～ 8	0 ～ 67	2 ～ 70	3 ～ 5	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 996	f8	No Induction Hardening	-	-	2 ～ 40	6 ～ 10	0 ～ 79	2 ～ 84	3 ～ 6	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 996	f8	No Induction Hardening	5 ～ 12	-	2 ～ 40	6 ～ 10	0 ～ 79	2 ～ 84	3 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	12	25 ～ 996	f8	No Induction Hardening	-	10 ～ 12	2 ～ 40	6 ～ 10	0 ～ 79	2 ～ 84	3 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 996	f8	No Induction Hardening	-	-	2 ～ 44	6 ～ 11	0 ～ 79	2 ～ 84	3 ～ 8	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 996	f8	No Induction Hardening	5 ～ 12	-	2 ～ 44	6 ～ 11	0 ～ 79	2 ～ 84	3 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 996	f8	No Induction Hardening	-	10 ～ 12	2 ～ 44	6 ～ 11	0 ～ 79	2 ～ 84	3 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 996	f8	No Induction Hardening	-	-	2 ～ 52	6 ～ 13	0 ～ 84	2 ～ 84	3 ～ 10	5 ～ 16
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 996	f8	No Induction Hardening	5 ～ 15	-	2 ～ 52	6 ～ 13	0 ～ 84	2 ～ 84	3 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 996	f8	No Induction Hardening	-	10 ～ 14	2 ～ 52	6 ～ 13	0 ～ 84	2 ～ 84	3 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 1196	f8	No Induction Hardening	-	-	2 ～ 56	6 ～ 14	0 ～ 107	2 ～ 112	3 ～ 10	5 ～ 16
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 1196	f8	No Induction Hardening	5 ～ 15	-	2 ～ 56	6 ～ 14	0 ～ 107	2 ～ 112	3 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	16	25 ～ 1196	f8	No Induction Hardening	-	10 ～ 14	2 ～ 56	6 ～ 14	0 ～ 107	2 ～ 112	3 ～ 10	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	25 ～ 1196	f8	No Induction Hardening	-	-	2 ～ 56	6 ～ 16	0 ～ 107	2 ～ 112	4 ～ 12	5 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	25 ～ 1196	f8	No Induction Hardening	5 ～ 17	-	2 ～ 56	6 ～ 16	0 ～ 107	2 ～ 112	4 ～ 12	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	18	25 ～ 1196	f8	No Induction Hardening	-	10 ～ 18	2 ～ 56	6 ～ 16	0 ～ 107	2 ～ 112	4 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	25 ～ 1196	f8	No Induction Hardening	-	-	2 ～ 68	8 ～ 17	0 ～ 140	2 ～ 140	4 ～ 12	6 ～ 20
-	1 Piece(s)	6 Day(s)	10	Tapped	[Steel] S45C Equivalent	Not Provided	Hard Chrome Plating	20	25 ～ 1196	f8	No Induction Hardening	6 ～ 20	-	2 ～ 68	8 ～ 17	0 ～ 140	2 ～ 140	4 ～ 12	-

1
2
3
4
5
Next >>

Product TOP

Basic Information

Basic Shape	One End Stepped	End Shape (Right)	Threaded	Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?