Please note that the MISUMI India offices and warehouses will remain closed from Oct 31st to Nov 3rd due to the Diwali festival.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1,150 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

PSFAX8-[25-780/1]-F[2-42/1]-B[6-30/1]-P7-M6-T[2-42/1]-S[6-30/1]-Q7-N6

Specification/Dimensions

End Shape (Right)
- No Machining
- Threaded
Clear
Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1490/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
B(mm)
[6-210/1mm Unit(s)]
Clear
Change Thread M to Fine One [MMC](mm)
6

8

10

12

15

16

17

20

25

30
Clear
Change Thread M to Fine One [MMS](mm)
10

12

14

18
Clear
Change Thread N to Fine One [NMC](mm)
6

8

10

12

15

16

17

20

25

30
Clear
Change Thread N to Fine One [NMS](mm)
10

12

14

18
Clear
F(mm)
[2-343/1mm Unit(s)]
Clear
P(mm)
7

8

9

10

11
[7-49/1mm Unit(s)]
Clear
Q(mm)
7

8

9

10

11
[7-49/1mm Unit(s)]
Clear
S(mm)
[6-210/1mm Unit(s)]
Clear
T(mm)
[2-343/1mm Unit(s)]
Clear
Threaded (Coarse) [M](mm)
6

8

10

12

16

20

24

30
Clear
Threaded (Coarse) [N](mm)
6

8

10

12

16

20

24

30
Clear
type
- PSFAF
- PSFAX
- PSFGF
- PSFGX
- PSFUF
- PSFUX
- PSSFAF
- PSSFAX
- PSSFGF
- PSSFGX
- PSSFUF
- PSSFUX
- RSFAF
- RSFAX
- SFAF
- SFAX
- SFUF
- SFUX
- SSFAF
- SSFAX
- SSFUF
- SSFUX
Clear
Basic Shape
- One End Stepped
- Both Ends Stepped
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

8 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded

Name: Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded
Brand: MISUMI
Availability: PreOrder

Brand :

MISUMI

Part Number :

PSFAX8-[25-780/1]-F[2-42/1]-B[6-30/1]-P7-M6-T[2-42/1]-S[6-30/1]-Q7-N6

PSFAX8-[25-780/1]-F[2-42/1]-B[6-30/1]-P7-M6-T[2-42/1]-S[6-30/1]-Q7-NMC6

PSFAX8-[25-780/1]-F[2-42/1]-B[6-30/1]-P7-MMC6-T[2-42/1]-S[6-30/1]-Q7-N6

PSFAX8-[25-780/1]-F[2-42/1]-B[6-30/1]-P7-MMC6-T[2-42/1]-S[6-30/1]-Q7-NMC6

PSFAX10-[25-780/1]-F[2-63/1]-B[6-40/1]-P[7,8,9]-M[6,8]-T[2-63/1]-S[6-40/1]-Q[7,8,9]-N[6,8]

PSFAX10-[25-780/1]-F[2-63/1]-B[6-40/1]-P[7,8,9]-M[6,8]-T[2-63/1]-S[6-40/1]-Q[7,8,9]-NMC[6,8]

PSFAX10-[25-780/1]-F[2-63/1]-B[6-40/1]-P[7,8,9]-MMC[6,8]-T[2-63/1]-S[6-40/1]-Q[7,8,9]-N[6,8]

PSFAX10-[25-780/1]-F[2-63/1]-B[6-40/1]-P[7,8,9]-MMC[6,8]-T[2-63/1]-S[6-40/1]-Q[7,8,9]-NMC[6,8]

PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-M[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-N[6,8,10]

PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-M[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMC[6,8,10]

PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-M[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMS10

PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMC[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-N[6,8,10]

PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMC[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMC[6,8,10]

PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMC[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMS10

PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMS10-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-N[6,8,10]

PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMS10-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMC[6,8,10]

PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMS10-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMS10

PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-M[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-N[6,8,10]

PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-M[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-NMC[6,8,10]

PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-M[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-NMS10

PSFAX8-[25-780/1]-F[2-42/1]-B[6-30/1]-P7-M6-T[2-42/1]-S[6-30/1]-Q7-N6

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features]A shaft with a stepped male thread on one end (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

One End Stepped and Threaded:Related Image

Type						[ M ]Material	[ H ]Hardness	[ S ] Surface Treatment
One End Stepped and Threaded			Both Ends Stepped and Threaded
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. h5	D Tol. f8
SFAF	SFUF	-	SFAX	SFUX	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSFAF	SSFUF	-	SSFAX	SSFUX	-	SUS440C or 13Cr stainless		-
PSFAF	PSFUF	-	PSFAX	PSFUX	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More ~
PSSFAF	PSSFUF	-	PSSFAX	PSSFUX	-	SUS440C or 13Cr stainless
RSFAF	-	-	RSFAX	-	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGF	-	-	PSFGX	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More ~
-	-	PSSFGF	-	-	PSSFGX	SUS304	-

[ ! ] Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ] L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ] Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	F	-	B	-	P	-	M	-	T	-	S	-	Q	-	N
SFAX20	-	400	-	F30	-	B20	-	P10	-	M8	-	T20	-	S15	-	Q10	-	N8

Part Number			1mm Increment				M (Coarse) Selection								D Tol.			(Y)Max.	R	C
Type		D	L	F	B	P	M (Coarse) Selection								g6	h5	f8	(Y)Max.	R	C
One End Stepped and Threaded (D Tol. g6) SFAF SSFAF PSFAF PSSFAF (D Tol. f8) PSFGF PSSFGF	(D Tol. h5) SFUF SSFUF PSFUF PSSFUF	8	25~ 990	10≤F≤Px5	Pitchx3+(g)≤B≤Mx3	M<P<D	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~ 990				6	8							-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~1190				6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~1190				6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~1190				6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1190				6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1190				6	8	10	12	16				-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1190				6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1190					8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1490					8	10	12	16	20	24		-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1480	20≤F≤Px5					10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	25~1480							12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	25~1480								16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Part Number			1mm Increment				M (Coarse), N (Coarse) Selection								D Tol.			(Y)Max.	R	C
Type		D	L	F, T	B, S	P, Q	M (Coarse), N (Coarse) Selection								g6	h5	f8	(Y)Max.	R	C
Both Ends Stepped and Threaded (D Tol. g6) SFAX SSFAX PSFAX PSSFAX (D Tol. f8) PSFGX PSSFGX	(D Tol. h5) SFUX SSFUX PSFUX PSSFUX	8	25~790	10≤F≤Px510≤T≤Qx5	Pitchx3+(g)≤B≤Mx3 Pitchx3+(g)≤S≤Nx3	M<P<DN<Q<D	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~790				6	8							-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~990				6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~990				6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~990				6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1190				6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1190				6	8	10	12	16				-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1190				6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1190					8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1490					8	10	12	16	20	24		-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1480	20≤F≤Px520≤T≤Qx5					10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	25~1480							12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	25~1480								16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Coarse Thread Undercut Dimensions
M N	Pitch	MC NC	(g)
6	1.0	4.4	2
8	1.25	6.0	3
10	1.5	7.7	3
12	1.75	9.4	4
16	2.0	13.0	4
20	2.5	16.4	5
24	3.0	19.6	5
30	3.5	25.0	5

Part Number		1mm Increment				M (Coarse) Selection							D Tol.	(Y)Max.	R	C
Type	D	L	F	B	P	M (Coarse) Selection							g6	(Y)Max.	R	C
One End Stepped and Threaded (D Tol. g6) Low Temp. Black Chrome Plating RSFAF (Ymax≤800)	8	25~500	10≤F≤Px5	Pitchx3+(g)≤B≤Mx3	M<P<D	6							-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				6	8						-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500				6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500				6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500				6	8	10	12				-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500				6	8	10	12				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500				6	8	10	12	16			-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500				6	8	10	12	16			-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500					8	10	12	16	20		-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500					8	10	12	16	20	24	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

Part Number		1mm Increment				M (Coarse), N (Coarse) Selection							D Tol.	(Y)Max.	R	C
Type	D	L	F, T	B, S	P, Q	M (Coarse), N (Coarse) Selection							g6	(Y)Max.	R	C
Both Ends Stepped and Threaded (D Tol. g6) Low Temp. Black Chrome Plating RSFAX (Ymax≤800)	8	25~500	10≤F≤Px510≤T≤Qx5	Pitchx3+(g)≤B≤Mx3 Pitchx3+(g)≤S≤Nx3	M<P<DN<Q<D	6							-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				6	8						-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500				6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500				6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500				6	8	10	12				-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500				6	8	10	12				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500				6	8	10	12	16			-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500				6	8	10	12	16			-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500					8	10	12	16	20		-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500					8	10	12	16	20	24	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

[ ! ] F-B(T-S)≥2 is required.

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
PSFAX8-[25-780/1]-F[2-42/1]-B[6-30/1]-P7-M6-T[2-42/1]-S[6-30/1]-Q7-N6
PSFAX8-[25-780/1]-F[2-42/1]-B[6-30/1]-P7-M6-T[2-42/1]-S[6-30/1]-Q7-NMC6
PSFAX8-[25-780/1]-F[2-42/1]-B[6-30/1]-P7-MMC6-T[2-42/1]-S[6-30/1]-Q7-N6
PSFAX8-[25-780/1]-F[2-42/1]-B[6-30/1]-P7-MMC6-T[2-42/1]-S[6-30/1]-Q7-NMC6
PSFAX10-[25-780/1]-F[2-63/1]-B[6-40/1]-P[7,8,9]-M[6,8]-T[2-63/1]-S[6-40/1]-Q[7,8,9]-N[6,8]
PSFAX10-[25-780/1]-F[2-63/1]-B[6-40/1]-P[7,8,9]-M[6,8]-T[2-63/1]-S[6-40/1]-Q[7,8,9]-NMC[6,8]
PSFAX10-[25-780/1]-F[2-63/1]-B[6-40/1]-P[7,8,9]-MMC[6,8]-T[2-63/1]-S[6-40/1]-Q[7,8,9]-N[6,8]
PSFAX10-[25-780/1]-F[2-63/1]-B[6-40/1]-P[7,8,9]-MMC[6,8]-T[2-63/1]-S[6-40/1]-Q[7,8,9]-NMC[6,8]
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-M[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-N[6,8,10]
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-M[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMC[6,8,10]
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-M[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMS10
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMC[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-N[6,8,10]
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMC[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMC[6,8,10]
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMC[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMS10
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMS10-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-N[6,8,10]
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMS10-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMC[6,8,10]
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMS10-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMS10
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-M[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-N[6,8,10]
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-M[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-NMC[6,8,10]
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-M[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-NMS10
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-MMC[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-N[6,8,10]
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-MMC[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-NMC[6,8,10]
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-MMC[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-NMS10
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-MMS10-T[2-84/1]-S[6-50/1]-Q[7-12/1]-N[6,8,10]
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-MMS10-T[2-84/1]-S[6-50/1]-Q[7-12/1]-NMC[6,8,10]
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-MMS10-T[2-84/1]-S[6-50/1]-Q[7-12/1]-NMS10
PSFAX15-[25-980/1]-F[2-98/1]-B[6-60/1]-P[7-14/1]-M[6,8,10,12]-T[2-98/1]-S[6-60/1]-Q[7-14/1]-N[6,8,10,12]
PSFAX15-[25-980/1]-F[2-98/1]-B[6-60/1]-P[7-14/1]-M[6,8,10,12]-T[2-98/1]-S[6-60/1]-Q[7-14/1]-NMC[6,8,10,12]
PSFAX15-[25-980/1]-F[2-98/1]-B[6-60/1]-P[7-14/1]-M[6,8,10,12]-T[2-98/1]-S[6-60/1]-Q[7-14/1]-NMS[10,12]
PSFAX15-[25-980/1]-F[2-98/1]-B[6-60/1]-P[7-14/1]-MMC[6,8,10,12]-T[2-98/1]-S[6-60/1]-Q[7-14/1]-N[6,8,10,12]
PSFAX15-[25-980/1]-F[2-98/1]-B[6-60/1]-P[7-14/1]-MMC[6,8,10,12]-T[2-98/1]-S[6-60/1]-Q[7-14/1]-NMC[6,8,10,12]
PSFAX15-[25-980/1]-F[2-98/1]-B[6-60/1]-P[7-14/1]-MMC[6,8,10,12]-T[2-98/1]-S[6-60/1]-Q[7-14/1]-NMS[10,12]
PSFAX15-[25-980/1]-F[2-98/1]-B[6-60/1]-P[7-14/1]-MMS[10,12]-T[2-98/1]-S[6-60/1]-Q[7-14/1]-N[6,8,10,12]
PSFAX15-[25-980/1]-F[2-98/1]-B[6-60/1]-P[7-14/1]-MMS[10,12]-T[2-98/1]-S[6-60/1]-Q[7-14/1]-NMC[6,8,10,12]
PSFAX15-[25-980/1]-F[2-98/1]-B[6-60/1]-P[7-14/1]-MMS[10,12]-T[2-98/1]-S[6-60/1]-Q[7-14/1]-NMS[10,12]
PSFAX16-[25-1180/1]-F[2-105/1]-B[6-60/1]-P[7-15/1]-M[6,8,10,12]-T[2-105/1]-S[6-60/1]-Q[7-15/1]-N[6,8,10,12]
PSFAX16-[25-1180/1]-F[2-105/1]-B[6-60/1]-P[7-15/1]-M[6,8,10,12]-T[2-105/1]-S[6-60/1]-Q[7-15/1]-NMC[6,8,10,12]
PSFAX16-[25-1180/1]-F[2-105/1]-B[6-60/1]-P[7-15/1]-M[6,8,10,12]-T[2-105/1]-S[6-60/1]-Q[7-15/1]-NMS[10,12]
PSFAX16-[25-1180/1]-F[2-105/1]-B[6-60/1]-P[7-15/1]-MMC[6,8,10,12]-T[2-105/1]-S[6-60/1]-Q[7-15/1]-N[6,8,10,12]
PSFAX16-[25-1180/1]-F[2-105/1]-B[6-60/1]-P[7-15/1]-MMC[6,8,10,12]-T[2-105/1]-S[6-60/1]-Q[7-15/1]-NMC[6,8,10,12]
PSFAX16-[25-1180/1]-F[2-105/1]-B[6-60/1]-P[7-15/1]-MMC[6,8,10,12]-T[2-105/1]-S[6-60/1]-Q[7-15/1]-NMS[10,12]
PSFAX16-[25-1180/1]-F[2-105/1]-B[6-60/1]-P[7-15/1]-MMS[10,12]-T[2-105/1]-S[6-60/1]-Q[7-15/1]-N[6,8,10,12]
PSFAX16-[25-1180/1]-F[2-105/1]-B[6-60/1]-P[7-15/1]-MMS[10,12]-T[2-105/1]-S[6-60/1]-Q[7-15/1]-NMC[6,8,10,12]
PSFAX16-[25-1180/1]-F[2-105/1]-B[6-60/1]-P[7-15/1]-MMS[10,12]-T[2-105/1]-S[6-60/1]-Q[7-15/1]-NMS[10,12]
PSFAX18-[25-1180/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-M[6,8,10,12,16]-T[10-119/1]-S[6-80/1]-Q[7-17/1]-N[6,8,10,12,16]
PSFAX18-[25-1180/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-M[6,8,10,12,16]-T[10-119/1]-S[6-80/1]-Q[7-17/1]-NMC[6,8,10,12]
PSFAX18-[25-1180/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-M[6,8,10,12,16]-T[10-119/1]-S[6-80/1]-Q[7-17/1]-NMS[10,12,14]
PSFAX18-[25-1180/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-MMC[6,8,10,12]-T[10-119/1]-S[6-80/1]-Q[7-17/1]-N[6,8,10,12,16]
PSFAX18-[25-1180/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-MMC[6,8,10,12]-T[10-119/1]-S[6-80/1]-Q[7-17/1]-NMC[6,8,10,12]
PSFAX18-[25-1180/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-MMC[6,8,10,12]-T[10-119/1]-S[6-80/1]-Q[7-17/1]-NMS[10,12,14]
PSFAX18-[25-1180/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-MMS[10,12,14]-T[10-119/1]-S[6-80/1]-Q[7-17/1]-N[6,8,10,12,16]
PSFAX18-[25-1180/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-MMS[10,12,14]-T[10-119/1]-S[6-80/1]-Q[7-17/1]-NMC[6,8,10,12]
PSFAX18-[25-1180/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-MMS[10,12,14]-T[10-119/1]-S[6-80/1]-Q[7-17/1]-NMS[10,12,14]
PSFAX20-[25-1180/1]-F[2-133/1]-B[6-80/1]-P[7-19/1]-M[6,8,10,12,16]-T[2-133/1]-S[6-80/1]-Q[7-19/1]-N[6,8,10,12,16]
PSFAX20-[25-1180/1]-F[2-133/1]-B[6-80/1]-P[7-19/1]-M[6,8,10,12,16]-T[2-133/1]-S[6-80/1]-Q[7-19/1]-NMC[6,8,10,12,16]
PSFAX20-[25-1180/1]-F[2-133/1]-B[6-80/1]-P[7-19/1]-M[6,8,10,12,16]-T[2-133/1]-S[6-80/1]-Q[7-19/1]-NMS[10,12,14,18]
PSFAX20-[25-1180/1]-F[2-133/1]-B[6-80/1]-P[7-19/1]-MMC[6,8,10,12,16]-T[2-133/1]-S[6-80/1]-Q[7-19/1]-N[6,8,10,12,16]
PSFAX20-[25-1180/1]-F[2-133/1]-B[6-80/1]-P[7-19/1]-MMC[6,8,10,12,16]-T[2-133/1]-S[6-80/1]-Q[7-19/1]-NMC[6,8,10,12,16]
PSFAX20-[25-1180/1]-F[2-133/1]-B[6-80/1]-P[7-19/1]-MMC[6,8,10,12,16]-T[2-133/1]-S[6-80/1]-Q[7-19/1]-NMS[10,12,14,18]
PSFAX20-[25-1180/1]-F[2-133/1]-B[6-80/1]-P[7-19/1]-MMS[10,12,14,18]-T[2-133/1]-S[6-80/1]-Q[7-19/1]-N[6,8,10,12,16]

Price	Minimum Order Qty.	Days to Ship	RoHS	Basic Shape	End Shape (Right)	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	B (mm)	Change Thread M to Fine One [MMC] (mm)	Change Thread M to Fine One [MMS] (mm)	Change Thread N to Fine One [NMC] (mm)	Change Thread N to Fine One [NMS] (mm)	F (mm)	P (mm)	Q (mm)	S (mm)	T (mm)	Threaded (Coarse) [M] (mm)	Threaded (Coarse) [N] (mm)
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 30	-	-	-	-	2 ～ 42	7	7	6 ～ 30	2 ～ 42	6	6
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 30	-	-	6	-	2 ～ 42	7	7	6 ～ 30	2 ～ 42	6	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 30	6	-	-	-	2 ～ 42	7	7	6 ～ 30	2 ～ 42	-	6
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 30	6	-	6	-	2 ～ 42	7	7	6 ～ 30	2 ～ 42	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 40	-	-	-	-	2 ～ 63	7 ～ 9	7 ～ 9	6 ～ 40	2 ～ 63	6 ～ 8	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 40	-	-	6 ～ 8	-	2 ～ 63	7 ～ 9	7 ～ 9	6 ～ 40	2 ～ 63	6 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 40	6 ～ 8	-	-	-	2 ～ 63	7 ～ 9	7 ～ 9	6 ～ 40	2 ～ 63	-	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 40	6 ～ 8	-	6 ～ 8	-	2 ～ 63	7 ～ 9	7 ～ 9	6 ～ 40	2 ～ 63	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	-	-	-	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	6 ～ 10	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	-	6 ～ 10	-	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	-	-	10	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	6 ～ 10	-	-	-	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	6 ～ 10	-	6 ～ 10	-	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	6 ～ 10	-	-	10	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	10	-	-	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	10	6 ～ 10	-	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	10	-	10	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	-	-	-	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	6 ～ 10	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	-	6 ～ 10	-	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	-	-	10	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	6 ～ 10	-	-	-	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	6 ～ 10	-	6 ～ 10	-	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	6 ～ 10	-	-	10	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	10	-	-	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	10	6 ～ 10	-	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	10	-	10	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 60	-	-	-	-	2 ～ 98	7 ～ 14	7 ～ 14	6 ～ 60	2 ～ 98	6 ～ 12	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 60	-	-	6 ～ 12	-	2 ～ 98	7 ～ 14	7 ～ 14	6 ～ 60	2 ～ 98	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 60	-	-	-	10 ～ 12	2 ～ 98	7 ～ 14	7 ～ 14	6 ～ 60	2 ～ 98	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 60	6 ～ 12	-	-	-	2 ～ 98	7 ～ 14	7 ～ 14	6 ～ 60	2 ～ 98	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 60	6 ～ 12	-	6 ～ 12	-	2 ～ 98	7 ～ 14	7 ～ 14	6 ～ 60	2 ～ 98	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 60	6 ～ 12	-	-	10 ～ 12	2 ～ 98	7 ～ 14	7 ～ 14	6 ～ 60	2 ～ 98	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 60	-	10 ～ 12	-	-	2 ～ 98	7 ～ 14	7 ～ 14	6 ～ 60	2 ～ 98	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 60	-	10 ～ 12	6 ～ 12	-	2 ～ 98	7 ～ 14	7 ～ 14	6 ～ 60	2 ～ 98	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 60	-	10 ～ 12	-	10 ～ 12	2 ～ 98	7 ～ 14	7 ～ 14	6 ～ 60	2 ～ 98	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 60	-	-	-	-	2 ～ 105	7 ～ 15	7 ～ 15	6 ～ 60	2 ～ 105	6 ～ 12	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 60	-	-	6 ～ 12	-	2 ～ 105	7 ～ 15	7 ～ 15	6 ～ 60	2 ～ 105	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 60	-	-	-	10 ～ 12	2 ～ 105	7 ～ 15	7 ～ 15	6 ～ 60	2 ～ 105	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 60	6 ～ 12	-	-	-	2 ～ 105	7 ～ 15	7 ～ 15	6 ～ 60	2 ～ 105	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 60	6 ～ 12	-	6 ～ 12	-	2 ～ 105	7 ～ 15	7 ～ 15	6 ～ 60	2 ～ 105	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 60	6 ～ 12	-	-	10 ～ 12	2 ～ 105	7 ～ 15	7 ～ 15	6 ～ 60	2 ～ 105	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 60	-	10 ～ 12	-	-	2 ～ 105	7 ～ 15	7 ～ 15	6 ～ 60	2 ～ 105	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 60	-	10 ～ 12	6 ～ 12	-	2 ～ 105	7 ～ 15	7 ～ 15	6 ～ 60	2 ～ 105	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 60	-	10 ～ 12	-	10 ～ 12	2 ～ 105	7 ～ 15	7 ～ 15	6 ～ 60	2 ～ 105	-	-
-	1 Piece(s)	8 Day(s) or more	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	-	-	-	-	10 ～ 119	7 ～ 17	7 ～ 17	6 ～ 80	10 ～ 119	6 ～ 16	6 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	-	-	6 ～ 12	-	10 ～ 119	7 ～ 17	7 ～ 17	6 ～ 80	10 ～ 119	6 ～ 16	-
-	1 Piece(s)	8 Day(s) or more	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	-	-	-	10 ～ 14	10 ～ 119	7 ～ 17	7 ～ 17	6 ～ 80	10 ～ 119	6 ～ 16	-
-	1 Piece(s)	8 Day(s) or more	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	6 ～ 12	-	-	-	10 ～ 119	7 ～ 17	7 ～ 17	6 ～ 80	10 ～ 119	-	6 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	6 ～ 12	-	6 ～ 12	-	10 ～ 119	7 ～ 17	7 ～ 17	6 ～ 80	10 ～ 119	-	-
-	1 Piece(s)	8 Day(s) or more	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	6 ～ 12	-	-	10 ～ 14	10 ～ 119	7 ～ 17	7 ～ 17	6 ～ 80	10 ～ 119	-	-
-	1 Piece(s)	8 Day(s) or more	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	-	10 ～ 14	-	-	10 ～ 119	7 ～ 17	7 ～ 17	6 ～ 80	10 ～ 119	-	6 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	-	10 ～ 14	6 ～ 12	-	10 ～ 119	7 ～ 17	7 ～ 17	6 ～ 80	10 ～ 119	-	-
-	1 Piece(s)	8 Day(s) or more	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	-	10 ～ 14	-	10 ～ 14	10 ～ 119	7 ～ 17	7 ～ 17	6 ～ 80	10 ～ 119	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	-	-	-	-	2 ～ 133	7 ～ 19	7 ～ 19	6 ～ 80	2 ～ 133	6 ～ 16	6 ～ 16
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	-	-	6 ～ 16	-	2 ～ 133	7 ～ 19	7 ～ 19	6 ～ 80	2 ～ 133	6 ～ 16	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	-	-	-	10 ～ 18	2 ～ 133	7 ～ 19	7 ～ 19	6 ～ 80	2 ～ 133	6 ～ 16	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	6 ～ 16	-	-	-	2 ～ 133	7 ～ 19	7 ～ 19	6 ～ 80	2 ～ 133	-	6 ～ 16
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	6 ～ 16	-	6 ～ 16	-	2 ～ 133	7 ～ 19	7 ～ 19	6 ～ 80	2 ～ 133	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	6 ～ 16	-	-	10 ～ 18	2 ～ 133	7 ～ 19	7 ～ 19	6 ～ 80	2 ～ 133	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1180	g6	Induction Hardened (58HRC~)	6 ～ 80	-	10 ～ 18	-	-	2 ～ 133	7 ～ 19	7 ～ 19	6 ～ 80	2 ～ 133	-	6 ～ 16

1
2
3
4
5
Next >>

Example

Product TOP

Basic Information

End Shape (Left)	Threaded	Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?

Configure

Specification/Dimensions

End Shape (Right)

Material

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

B(mm)

Change Thread M to Fine One [MMC](mm)

Change Thread M to Fine One [MMS](mm)

Change Thread N to Fine One [NMC](mm)

Change Thread N to Fine One [NMS](mm)

F(mm)

P(mm)

Q(mm)

S(mm)

T(mm)

Threaded (Coarse) [M](mm)

Threaded (Coarse) [N](mm)

type

Basic Shape

CAD

Days to Ship

Specify Alterations

Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded

Copy Part Number URL to Clipboard

Product Description

Specifications

Alterations

Part Number

Example

Basic Information

Payment Method

Customer Service

My Account

About MISUMI

Related Sites

Social Media

MISUMI India Contact

Customer Service

日本語でのお問い合わせはジャパンデスクまで