Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(566 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

SFSU25-[25-1395/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-SC[0-1185/1]

Material Heat Treatment Surface Treatment Shaft Dia. D Length L Shaft Fit Tolerance Hardness Add Wrench Flats at One Location [SC] Change Thread M to Fine One [MMC] Change Thread M to Fine One [MMS] F H Threaded (Coarse) [M] type CAD Days to Ship

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1495/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Add Wrench Flats at One Location [SC](mm)
[0-1480/1mm Unit(s)]
Clear
Change Thread M to Fine One [MMC](mm)
6

8

10

12

15

17

20

25

30
Clear
Change Thread M to Fine One [MMS](mm)
10

12

14

18
Clear
F(mm)
[5-90/1mm Unit(s)]
Clear
H(mm)
[0-496/1mm Unit(s)]
Clear
Threaded (Coarse) [M](mm)
6

8

10

12

16

20

24

30
Clear
type
- PSAFS
- PSAGS
- PSFSU
- PSHFS
- PSHGS
- PSSAFS
- PSSAGS
- PSSFSU
- PSSHFS
- RSAFS
- RSHFS
- SAFS
- SFHS
- SFSU
- SSAFS
- SSFSU
- SSHFS
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

8 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Linear Shafts-One End Threaded with Undercut and Wrench Flats / Cross-Drilled Hole (Part Number)

Name: Linear Shafts-One End Threaded with Undercut and Wrench Flats / Cross-Drilled Hole
Brand: MISUMI
Availability: PreOrder

Brand :

MISUMI

Part Number :

SFSU25-[25-1395/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-SC[0-1185/1]

SFSU25-[25-1395/1]-F[5-72/1]-MMS[10,12,14,18]-SC[0-1185/1]

SFSU30-[25-1495/1]-F[5-72/1]-M[8,10,12,16,20,24]-SC[0-1480/1]

SFSU30-[25-1495/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-SC[0-1480/1]

SFSU30-[25-1495/1]-F[5-72/1]-MMS[10,12,14,18]-SC[0-1480/1]

SFSU35-[25-1495/1]-F[5-90/1]-M[10,12,16,20,24,30]-SC[0-1480/1]

SFSU35-[25-1495/1]-F[5-90/1]-MMC[10,12,15,17,20,25,30]-SC[0-1480/1]

SFSU35-[25-1495/1]-F[5-90/1]-MMS[10,12,14,18]-SC[0-1480/1]

SFSU40-[25-1495/1]-F[5-90/1]-M[12,16,20,24,30]-SC[0-1475/1]

SFSU40-[25-1495/1]-F[5-90/1]-MMC[12,15,17,20,25,30]-SC[0-1475/1]

SFSU40-[25-1495/1]-F[5-90/1]-MMS[12,14,18]-SC[0-1475/1]

SFSU50-[25-1495/1]-F[5-90/1]-M[16,20,24,30]-SC[0-1475/1]

SFSU50-[25-1495/1]-F[5-90/1]-MMC[15,17,20,25,30]-SC[0-1475/1]

SFSU50-[25-1495/1]-F[5-90/1]-MMS[14,18]-SC[0-1475/1]

SSAFS8-[25-795/1]-F[5-18/1]-M6-SC[0-787/1]

SSAFS8-[25-795/1]-F[5-18/1]-MMC6-SC[0-787/1]

SSAFS10-[25-795/1]-F[5-24/1]-M[6,8]-SC[0-787/1]

SSAFS10-[25-795/1]-F[5-24/1]-MMC[6,8]-SC[0-787/1]

SSAFS12-[25-995/1]-F[5-30/1]-M[6,8,10]-SC[0-985/1]

SSAFS12-[25-995/1]-F[5-30/1]-MMC[6,8,10]-SC[0-985/1]

SFSU25-[25-1395/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-SC[0-1185/1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with one end male screw relief groove, drilled hole type, and wrench groove type. L size standard expanded! You can now purchase from an even more complete lineup.

One End Threaded with Undercut and Wrench Flats/Cross-Drilled Hole:Related Image

Type					[ M ]Material	[ H ]Hardness	[ S ] Surface Treatment
With Wrench Flats			With Cross-Drilled Hole
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. f8
SAFS	SFSU	-	SFHS	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSAFS	SSFSU	-	SSHFS	-	SUS440C or 13Cr stainless		-
PSAFS	PSFSU	-	PSHFS	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSAFS	PSSFSU	-	PSSHFS	-	SUS440C or 13Cr stainless
RSAFS	-	-	RSHFS	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSAGS	-	PSHGS	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSAGS	-	-	SUS304	-

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	F	-	M	-	SC	-	H
SAFS13	-	800	-	F23	-	M10
SSHFS20	-	450	-	F28	-	M12			-	H15

Part Number			1mm Increments		Selection								Wrench Flats Dimensions			D Tol.			(Y)Max.	C
Type		D	L	F	M (Coarse)								SC	W	ℓ₁	g6	h5	f8	(Y)Max.	C
(With Wrench Flats) (D Tol. g6) SAFS SSAFS PSAFS PSSAFS (D Tol. f8) PSAGS PSSAGS	(D Tol. h5) SFSU SSFSU PSFSU PSSFSU	8	25~ 995	5≤F≤Mx3 [ ! ]F-(g)≥Pitchx3	6								SC = 1mm Increment [ ! ]SC+ℓ₁≤L[ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	7	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.5 or Less
		10	25~ 995		6	8								8	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.5 or Less
		12	25~1195		6	8	10							10	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.5 or Less
		13	25~1195		6	8	10	12						11	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.5 or Less
		15	25~1195		6	8	10	12						13	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.5 or Less
		16	25~1195		6	8	10	12						14	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.5 or Less
		18	25~1195		6	8	10	12	16					16	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.5 or Less
		20	25~1195		6	8	10	12	16					17	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	1.0 or Less
		25	25~1195			8	10	12	16	20	24			22	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	1.0 or Less
		30	25~1495			8	10	12	16	20	24			27	15	-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	1.0 or Less
		35	25~1495				10	12	16	20	24	30		30	15	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	1.0 or Less
		40	25~1495					12	16	20	24	30		36	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	1.0 or Less
		50	25~1495						16	20	24	30		41	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	1.0 or Less

Part Number		1mm Increment		Selection							Wrench Flats Dimensions			D Tol.	(Y)Max.	C
Type	D	L	F	M (Coarse)							SC	W	ℓ₁	g6	(Y)Max.	C
(With Wrench Flats) (D Tol. g6) Low Temp. Black Chrome Plating RSAFS	8	25~500	5≤F≤Mx3 [ ! ]F-(g)≥Pitchx3	6							SC = 1mm Increment [ ! ]SC+ℓ₁≤L[ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	7	8	-0.005 -0.014	800	0.5 or Less
	10	25~500		6	8							8	8	-0.005 -0.014	800	0.5 or Less
	12	25~500		6	8	10						10	10	-0.006 -0.017	1000	0.5 or Less
	13	25~500		6	8	10	12					11	10	-0.006 -0.017	1000	0.5 or Less
	15	25~500		6	8	10	12					13	10	-0.006 -0.017	1000	0.5 or Less
	16	25~500		6	8	10	12					14	10	-0.006 -0.017	1200	0.5 or Less
	18	25~500		6	8	10	12	16				16	10	-0.006 -0.017	1200	0.5 or Less
	20	25~500		6	8	10	12	16				17	10	-0.007 -0.020	1200	1.0 or Less
	25	25~500			8	10	12	16	20	24		22	10	-0.007 -0.020	1200	1.0 or Less
	30	25~500			8	10	12	16	20	24		27	15	-0.007 -0.020	1500	1.0 or Less

Part Number		1mm Increment		Selection							Cross-Drilled Hole Dimensions		D Tol.		(Y)Max.	C
Type	D	L	F	M (Coarse)							H	d	g6	f8	(Y)Max.	C
(With Cross-Drilled Hole) (D Tol. g6) SFHS SSHFS PSHFS PSSHFS RSHFS (D Tol. f8) PSHGS [ ! ]D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.	8	25~500	5≤F≤Mx3 [ ! ]F-(g)≥Pitchx3	6							H=1mm Increment [ ! ]L≥H+d/2+2 [ ! ]H≥d/2+2	3	-0.005 -0.014	-0.013 -0.035	800	0.5 or Less
	10	25~500		6	8							3	-0.005 -0.014	-0.013 -0.035	800	0.5 or Less
	12	25~500		6	8	10						3	-0.006 -0.017	-0.016 -0.043	1000	0.5 or Less
	13	25~500		6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1000	0.5 or Less
	15	25~500		6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1000	0.5 or Less
	16	25~500		6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1200	0.5 or Less
	18	25~500		6	8	10	12	16				6	-0.006 -0.017	-0.016 -0.043	1200	0.5 or Less
	20	25~500		6	8	10	12	16				6	-0.007 -0.020	-0.020 -0.053	1200	1.0 or Less
	25	25~500			8	10	12	16	20	24		7	-0.007 -0.020	-0.020 -0.053	1200	1.0 or Less
	30	25~500			8	10	12	16	20	24		7	-0.007 -0.020	-0.020 -0.053	1500	1.0 or Less

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
SFSU25-[25-1395/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-SC[0-1185/1]
SFSU25-[25-1395/1]-F[5-72/1]-MMS[10,12,14,18]-SC[0-1185/1]
SFSU30-[25-1495/1]-F[5-72/1]-M[8,10,12,16,20,24]-SC[0-1480/1]
SFSU30-[25-1495/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-SC[0-1480/1]
SFSU30-[25-1495/1]-F[5-72/1]-MMS[10,12,14,18]-SC[0-1480/1]
SFSU35-[25-1495/1]-F[5-90/1]-M[10,12,16,20,24,30]-SC[0-1480/1]
SFSU35-[25-1495/1]-F[5-90/1]-MMC[10,12,15,17,20,25,30]-SC[0-1480/1]
SFSU35-[25-1495/1]-F[5-90/1]-MMS[10,12,14,18]-SC[0-1480/1]
SFSU40-[25-1495/1]-F[5-90/1]-M[12,16,20,24,30]-SC[0-1475/1]
SFSU40-[25-1495/1]-F[5-90/1]-MMC[12,15,17,20,25,30]-SC[0-1475/1]
SFSU40-[25-1495/1]-F[5-90/1]-MMS[12,14,18]-SC[0-1475/1]
SFSU50-[25-1495/1]-F[5-90/1]-M[16,20,24,30]-SC[0-1475/1]
SFSU50-[25-1495/1]-F[5-90/1]-MMC[15,17,20,25,30]-SC[0-1475/1]
SFSU50-[25-1495/1]-F[5-90/1]-MMS[14,18]-SC[0-1475/1]
SSAFS8-[25-795/1]-F[5-18/1]-M6-SC[0-787/1]
SSAFS8-[25-795/1]-F[5-18/1]-MMC6-SC[0-787/1]
SSAFS10-[25-795/1]-F[5-24/1]-M[6,8]-SC[0-787/1]
SSAFS10-[25-795/1]-F[5-24/1]-MMC[6,8]-SC[0-787/1]
SSAFS12-[25-995/1]-F[5-30/1]-M[6,8,10]-SC[0-985/1]
SSAFS12-[25-995/1]-F[5-30/1]-MMC[6,8,10]-SC[0-985/1]
SSAFS12-[25-995/1]-F[5-30/1]-MMS10-SC[0-985/1]
SSAFS13-[25-995/1]-F[5-36/1]-M[6,8,10,12]-SC[0-985/1]
SSAFS13-[25-995/1]-F[5-36/1]-MMC[6,8,10]-SC[0-985/1]
SSAFS13-[25-995/1]-F[5-36/1]-MMS10-SC[0-985/1]
SSAFS15-[25-995/1]-F[5-36/1]-M[6,8,10,12]-SC[0-985/1]
SSAFS15-[25-995/1]-F[5-36/1]-MMC[6,8,10,12]-SC[0-985/1]
SSAFS15-[25-995/1]-F[5-36/1]-MMS[10,12]-SC[0-985/1]
SSAFS16-[25-1195/1]-F[5-36/1]-M[6,8,10,12]-SC[0-1185/1]
SSAFS16-[25-1195/1]-F[5-36/1]-MMC[6,8,10,12]-SC[0-1185/1]
SSAFS16-[25-1195/1]-F[5-36/1]-MMS[10,12]-SC[0-1185/1]
SSAFS18-[25-1195/1]-F[5-48/1]-M[6,8,10,12,16]-SC[0-1185/1]
SSAFS18-[25-1195/1]-F[5-48/1]-MMC[6,8,10,12,15]-SC[0-1185/1]
SSAFS18-[25-1195/1]-F[5-48/1]-MMS[10,12,14]-SC[0-1185/1]
SSAFS20-[25-1195/1]-F[5-48/1]-M[6,8,10,12,16]-SC[0-1185/1]
SSAFS20-[25-1195/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-SC[0-1185/1]
SSAFS20-[25-1195/1]-F[5-48/1]-MMS[10,12,14,18]-SC[0-1185/1]
SSAFS25-[25-1195/1]-F[5-72/1]-M[8,10,12,16,20,24]-SC[0-1185/1]
SSAFS25-[25-1195/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-SC[0-1185/1]
SSAFS25-[25-1195/1]-F[5-72/1]-MMS[10,12,14,18]-SC[0-1185/1]
SSAFS30-[25-1495/1]-F[5-72/1]-M[8,10,12,16,20,24]-SC[0-1480/1]
SSAFS30-[25-1495/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-SC[0-1480/1]
SSAFS30-[25-1495/1]-F[5-72/1]-MMS[10,12,14,18]-SC[0-1480/1]
SSAFS35-[25-1495/1]-F[5-90/1]-M[10,12,16,20,24,30]-SC[0-1480/1]
SSAFS35-[25-1495/1]-F[5-90/1]-MMC[10,12,15,17,20,25,30]-SC[0-1480/1]
SSAFS35-[25-1495/1]-F[5-90/1]-MMS[10,12,14,18]-SC[0-1480/1]
SSAFS40-[25-1495/1]-F[5-90/1]-M[12,16,20,24,30]-SC[0-1475/1]
SSAFS40-[25-1495/1]-F[5-90/1]-MMC[12,15,17,20,25,30]-SC[0-1475/1]
SSAFS40-[25-1495/1]-F[5-90/1]-MMS[12,14,18]-SC[0-1475/1]
SSAFS50-[25-1495/1]-F[5-90/1]-M[16,20,24,30]-SC[0-1475/1]
SSAFS50-[25-1495/1]-F[5-90/1]-MMC[15,17,20,25,30]-SC[0-1475/1]
SSAFS50-[25-1495/1]-F[5-90/1]-MMS[14,18]-SC[0-1475/1]
SSFSU8-[25-1095/1]-F[5-18/1]-M6-SC[0-787/1]
SSFSU8-[25-1095/1]-F[5-18/1]-MMC6-SC[0-787/1]
SSFSU10-[25-1195/1]-F[5-24/1]-M[6,8]-SC[0-787/1]
SSFSU10-[25-1195/1]-F[5-24/1]-MMC[6,8]-SC[0-787/1]
SSFSU12-[25-1395/1]-F[5-30/1]-M[6,8,10]-SC[0-985/1]
SSFSU12-[25-1395/1]-F[5-30/1]-MMC[6,8,10]-SC[0-985/1]
SSFSU12-[25-1395/1]-F[5-30/1]-MMS10-SC[0-985/1]
SSFSU13-[25-1395/1]-F[5-36/1]-M[6,8,10,12]-SC[0-985/1]
SSFSU13-[25-1395/1]-F[5-36/1]-MMC[6,8,10]-SC[0-985/1]
SSFSU13-[25-1395/1]-F[5-36/1]-MMS10-SC[0-985/1]
SSFSU15-[25-1395/1]-F[5-36/1]-M[6,8,10,12]-SC[0-985/1]
SSFSU15-[25-1395/1]-F[5-36/1]-MMC[6,8,10,12]-SC[0-985/1]
SSFSU15-[25-1395/1]-F[5-36/1]-MMS[10,12]-SC[0-985/1]
SSFSU16-[25-1395/1]-F[5-36/1]-M[6,8,10,12]-SC[0-1185/1]
SSFSU16-[25-1395/1]-F[5-36/1]-MMC[6,8,10,12]-SC[0-1185/1]
SSFSU16-[25-1395/1]-F[5-36/1]-MMS[10,12,14]-SC[0-1185/1]
SSFSU18-[25-1395/1]-F[5-48/1]-M[6,8,10,12,16]-SC[0-1185/1]
SSFSU18-[25-1395/1]-F[5-48/1]-MMC[6,8,10,12,15]-SC[0-1185/1]
SSFSU18-[25-1395/1]-F[5-48/1]-MMS[10,12,14]-SC[0-1185/1]
SSFSU20-[25-1395/1]-F[5-48/1]-M[6,8,10,12,16]-SC[0-1185/1]
SSFSU20-[25-1395/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-SC[0-1185/1]
SSFSU20-[25-1395/1]-F[5-48/1]-MMS[10,12,14,18]-SC[0-1185/1]
SSFSU25-[25-1395/1]-F[5-72/1]-M[8,10,12,16,20,24]-SC[0-1185/1]
SSFSU25-[25-1395/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-SC[0-1185/1]
SSFSU25-[25-1395/1]-F[5-72/1]-MMS[10,12,14,18]-SC[0-1185/1]
SSFSU30-[25-1495/1]-F[5-72/1]-M[8,10,12,16,20,24]-SC[0-1480/1]
SSFSU30-[25-1495/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-SC[0-1480/1]
SSFSU30-[25-1495/1]-F[5-72/1]-MMS[10,12,14,18]-SC[0-1480/1]
SSFSU35-[25-1495/1]-F[5-90/1]-M[10,12,16,20,24,30]-SC[0-1480/1]
SSFSU35-[25-1495/1]-F[5-90/1]-MMC[10,12,15,17,20,25,30]-SC[0-1480/1]
SSFSU35-[25-1495/1]-F[5-90/1]-MMS[10,12,14,18]-SC[0-1480/1]
SSFSU40-[25-1495/1]-F[5-90/1]-M[12,16,20,24,30]-SC[0-1475/1]
SSFSU40-[25-1495/1]-F[5-90/1]-MMC[12,15,17,20,25,30]-SC[0-1475/1]
SSFSU40-[25-1495/1]-F[5-90/1]-MMS[12,14,18]-SC[0-1475/1]
SSFSU50-[25-1495/1]-F[5-90/1]-M[16,20,24,30]-SC[0-1475/1]
SSFSU50-[25-1495/1]-F[5-90/1]-MMC[15,17,20,25,30]-SC[0-1475/1]
SSFSU50-[25-1495/1]-F[5-90/1]-MMS[14,18]-SC[0-1475/1]
SSHFS8-[25-500/1]-F[5-18/1]-M6-H[0-496/1]
SSHFS8-[25-500/1]-F[5-18/1]-MMC6-H[0-496/1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Add Wrench Flats at One Location [SC] (mm)	Change Thread M to Fine One [MMC] (mm)	Change Thread M to Fine One [MMS] (mm)	F (mm)	H (mm)	Threaded (Coarse) [M] (mm)
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1395	h5	Induction Hardened (58HRC~)	0 ～ 1185	8 ～ 20	-	5 ～ 72	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1395	h5	Induction Hardened (58HRC~)	0 ～ 1185	-	10 ～ 18	5 ～ 72	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (58HRC~)	0 ～ 1480	-	-	5 ～ 72	-	8 ～ 24
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (58HRC~)	0 ～ 1480	8 ～ 25	-	5 ～ 72	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (58HRC~)	0 ～ 1480	-	10 ～ 18	5 ～ 72	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1495	h5	Induction Hardened (58HRC~)	0 ～ 1480	-	-	5 ～ 90	-	10 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1495	h5	Induction Hardened (58HRC~)	0 ～ 1480	10 ～ 30	-	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1495	h5	Induction Hardened (58HRC~)	0 ～ 1480	-	10 ～ 18	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1495	h5	Induction Hardened (58HRC~)	0 ～ 1475	-	-	5 ～ 90	-	12 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1495	h5	Induction Hardened (58HRC~)	0 ～ 1475	12 ～ 30	-	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1495	h5	Induction Hardened (58HRC~)	0 ～ 1475	-	12 ～ 18	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1495	h5	Induction Hardened (58HRC~)	0 ～ 1475	-	-	5 ～ 90	-	16 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1495	h5	Induction Hardened (58HRC~)	0 ～ 1475	15 ～ 30	-	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1495	h5	Induction Hardened (58HRC~)	0 ～ 1475	-	14 ～ 18	5 ～ 90	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 795	g6	Induction Hardened (56HRC~)	0 ～ 787	-	-	5 ～ 18	-	6
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 795	g6	Induction Hardened (56HRC~)	0 ～ 787	6	-	5 ～ 18	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 795	g6	Induction Hardened (56HRC~)	0 ～ 787	-	-	5 ～ 24	-	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 795	g6	Induction Hardened (56HRC~)	0 ～ 787	6 ～ 8	-	5 ～ 24	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 995	g6	Induction Hardened (56HRC~)	0 ～ 985	-	-	5 ～ 30	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 995	g6	Induction Hardened (56HRC~)	0 ～ 985	6 ～ 10	-	5 ～ 30	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 995	g6	Induction Hardened (56HRC~)	0 ～ 985	-	10	5 ～ 30	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 995	g6	Induction Hardened (56HRC~)	0 ～ 985	-	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 995	g6	Induction Hardened (56HRC~)	0 ～ 985	6 ～ 10	-	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 995	g6	Induction Hardened (56HRC~)	0 ～ 985	-	10	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 995	g6	Induction Hardened (56HRC~)	0 ～ 985	-	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 995	g6	Induction Hardened (56HRC~)	0 ～ 985	6 ～ 12	-	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 995	g6	Induction Hardened (56HRC~)	0 ～ 985	-	10 ～ 12	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	16	25 ～ 1195	g6	Induction Hardened (56HRC~)	0 ～ 1185	-	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	16	25 ～ 1195	g6	Induction Hardened (56HRC~)	0 ～ 1185	6 ～ 12	-	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	16	25 ～ 1195	g6	Induction Hardened (56HRC~)	0 ～ 1185	-	10 ～ 12	5 ～ 36	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	18	25 ～ 1195	g6	Induction Hardened (56HRC~)	0 ～ 1185	-	-	5 ～ 48	-	6 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	18	25 ～ 1195	g6	Induction Hardened (56HRC~)	0 ～ 1185	6 ～ 15	-	5 ～ 48	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	18	25 ～ 1195	g6	Induction Hardened (56HRC~)	0 ～ 1185	-	10 ～ 14	5 ～ 48	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	20	25 ～ 1195	g6	Induction Hardened (56HRC~)	0 ～ 1185	-	-	5 ～ 48	-	6 ～ 16
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	20	25 ～ 1195	g6	Induction Hardened (56HRC~)	0 ～ 1185	6 ～ 17	-	5 ～ 48	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	20	25 ～ 1195	g6	Induction Hardened (56HRC~)	0 ～ 1185	-	10 ～ 18	5 ～ 48	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	25	25 ～ 1195	g6	Induction Hardened (56HRC~)	0 ～ 1185	-	-	5 ～ 72	-	8 ～ 24
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	25	25 ～ 1195	g6	Induction Hardened (56HRC~)	0 ～ 1185	8 ～ 20	-	5 ～ 72	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	25	25 ～ 1195	g6	Induction Hardened (56HRC~)	0 ～ 1185	-	10 ～ 18	5 ～ 72	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	30	25 ～ 1495	g6	Induction Hardened (56HRC~)	0 ～ 1480	-	-	5 ～ 72	-	8 ～ 24
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	30	25 ～ 1495	g6	Induction Hardened (56HRC~)	0 ～ 1480	8 ～ 25	-	5 ～ 72	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	30	25 ～ 1495	g6	Induction Hardened (56HRC~)	0 ～ 1480	-	10 ～ 18	5 ～ 72	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	35	25 ～ 1495	g6	Induction Hardened (56HRC~)	0 ～ 1480	-	-	5 ～ 90	-	10 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	35	25 ～ 1495	g6	Induction Hardened (56HRC~)	0 ～ 1480	10 ～ 30	-	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	35	25 ～ 1495	g6	Induction Hardened (56HRC~)	0 ～ 1480	-	10 ～ 18	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	40	25 ～ 1495	g6	Induction Hardened (56HRC~)	0 ～ 1475	-	-	5 ～ 90	-	12 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	40	25 ～ 1495	g6	Induction Hardened (56HRC~)	0 ～ 1475	12 ～ 30	-	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	40	25 ～ 1495	g6	Induction Hardened (56HRC~)	0 ～ 1475	-	12 ～ 18	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	50	25 ～ 1495	g6	Induction Hardened (56HRC~)	0 ～ 1475	-	-	5 ～ 90	-	16 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	50	25 ～ 1495	g6	Induction Hardened (56HRC~)	0 ～ 1475	15 ～ 30	-	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	50	25 ～ 1495	g6	Induction Hardened (56HRC~)	0 ～ 1475	-	14 ～ 18	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 1095	h5	Induction Hardened (56HRC~)	0 ～ 787	-	-	5 ～ 18	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 1095	h5	Induction Hardened (56HRC~)	0 ～ 787	6	-	5 ～ 18	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 1195	h5	Induction Hardened (56HRC~)	0 ～ 787	-	-	5 ～ 24	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 1195	h5	Induction Hardened (56HRC~)	0 ～ 787	6 ～ 8	-	5 ～ 24	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 985	-	-	5 ～ 30	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 985	6 ～ 10	-	5 ～ 30	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 985	-	10	5 ～ 30	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 985	-	-	5 ～ 36	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 985	6 ～ 10	-	5 ～ 36	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 985	-	10	5 ～ 36	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 985	-	-	5 ～ 36	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 985	6 ～ 12	-	5 ～ 36	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 985	-	10 ～ 12	5 ～ 36	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	16	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 1185	-	-	5 ～ 36	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	16	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 1185	6 ～ 12	-	5 ～ 36	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	16	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 1185	-	10 ～ 14	5 ～ 36	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	18	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 1185	-	-	5 ～ 48	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	18	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 1185	6 ～ 15	-	5 ～ 48	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	18	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 1185	-	10 ～ 14	5 ～ 48	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	20	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 1185	-	-	5 ～ 48	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	20	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 1185	6 ～ 17	-	5 ～ 48	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	20	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 1185	-	10 ～ 18	5 ～ 48	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	25	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 1185	-	-	5 ～ 72	-	8 ～ 24
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	25	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 1185	8 ～ 20	-	5 ～ 72	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	25	25 ～ 1395	h5	Induction Hardened (56HRC~)	0 ～ 1185	-	10 ～ 18	5 ～ 72	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (56HRC~)	0 ～ 1480	-	-	5 ～ 72	-	8 ～ 24
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (56HRC~)	0 ～ 1480	8 ～ 25	-	5 ～ 72	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	30	25 ～ 1495	h5	Induction Hardened (56HRC~)	0 ～ 1480	-	10 ～ 18	5 ～ 72	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	35	25 ～ 1495	h5	Induction Hardened (56HRC~)	0 ～ 1480	-	-	5 ～ 90	-	10 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	35	25 ～ 1495	h5	Induction Hardened (56HRC~)	0 ～ 1480	10 ～ 30	-	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	35	25 ～ 1495	h5	Induction Hardened (56HRC~)	0 ～ 1480	-	10 ～ 18	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	40	25 ～ 1495	h5	Induction Hardened (56HRC~)	0 ～ 1475	-	-	5 ～ 90	-	12 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	40	25 ～ 1495	h5	Induction Hardened (56HRC~)	0 ～ 1475	12 ～ 30	-	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	40	25 ～ 1495	h5	Induction Hardened (56HRC~)	0 ～ 1475	-	12 ～ 18	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	50	25 ～ 1495	h5	Induction Hardened (56HRC~)	0 ～ 1475	-	-	5 ～ 90	-	16 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	50	25 ～ 1495	h5	Induction Hardened (56HRC~)	0 ～ 1475	15 ～ 30	-	5 ～ 90	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	50	25 ～ 1495	h5	Induction Hardened (56HRC~)	0 ～ 1475	-	14 ～ 18	5 ～ 90	-	-
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 500	g6	Induction Hardened (56HRC~)	-	-	-	5 ～ 18	0 ～ 496	6
-	1 Piece(s)	6 Day(s)	10	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 500	g6	Induction Hardened (56HRC~)	-	6	-	5 ～ 18	0 ～ 496	-

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	No Machining
Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?