Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 to 18:30 (IST) 16/6/2024. We apologize for the inconvenience.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(35 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

RSFAN4-[25-298/1]-F[2-20/1]-B[2-20/1]-P3

Material Heat Treatment Shaft Dia. D Length L Shaft Fit Tolerance Hardness B F Fine Thread [PMC] Fine Thread [PMS] P type Surface Treatment CAD Days to Ship

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Shaft Dia. D(Ø)
4

5

6

8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-500/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
B(mm)
0
[2-150/1mm Unit(s)]
Clear
F(mm)
[2-150/1mm Unit(s)]
Clear
Fine Thread [PMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
Fine Thread [PMS](mm)
10

12

14

18
Clear
P(mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
type
- PSFAN
- PSFGN
- PSFUN
- PSSFAN
- PSSFGN
- PSSFUN
- RSFAN
- SFAN
- SFUN
- SSFAN
- SSFUN
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

8 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Linear Shafts-One End Threaded

Name: Linear Shafts-One End Threaded
Brand: MISUMI

Brand :

MISUMI

Part Number :

RSFAN4-[25-298/1]-F[2-20/1]-B[2-20/1]-P3

RSFAN4-[25-298/1]-F[2-20/1]-B[2-20/1]-PMC3

RSFAN5-[25-398/1]-F[2-25/1]-B[2-25/1]-P[3,4]

RSFAN5-[25-398/1]-F[2-25/1]-B[2-25/1]-PMC[3,4]

RSFAN6-[25-500/1]-F[2-30/1]-B[2-30/1]-P[3,4,5]

RSFAN6-[25-500/1]-F[2-30/1]-B[2-30/1]-PMC[3,4,5]

RSFAN8-[25-500/1]-F[2-40/1]-B[2-40/1]-P[3,4,5,6]

RSFAN8-[25-500/1]-F[2-40/1]-B[2-40/1]-PMC[3,4,5,6]

RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-P[4,5,6,8]

RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMC[4,5,6,8]

RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMS10

RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10]

RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10]

RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12]

RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]

RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10]

RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12]

RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]

RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12]

RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12,14]

RSFAN4-[25-298/1]-F[2-20/1]-B[2-20/1]-P3

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features]A shaft with a male thread on one end (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

Type			[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
D Tol. g6	D Tol. h5	D Tol. f8	[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
SFAN	SFUN	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSFAN	SSFUN	-	SUS440C or 13Cr stainless		-
PSFAN	PSFUN	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFAN	PSSFUN	-	SUS440C or 13Cr stainless
RSFAN	-	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGN	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSFGN	SUS304	-

[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm).
[ ! ]Features of Low Temp. Black Chrome Plating p1_142
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141

Specifications

Part Number	-	L	-	F	-	B	-	P
SFAN12	-	500	-	F20	-	B15	-	P6
SFUN8	-	150	-	F20	-	B15	-	P6

Part Number			1mm Increment			P Selection											D Tol.			(Y)Max.	R	C
Type		D	L	F	B	P Selection											g6	h5	f8	(Y)Max.	R	C
(D Tol. g6) SFAN SSFAN PSFAN PSSFAN (D Tol. f8) PSFGN (D≥6) PSSFGN (D≥6)	(D Tol. h5) SFUN SSFUN PSFUN PSSFUN	4	25~ 298	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 [ ! ]B≥Pitchx3	3											-0.004 -0.012	0 -0.005	-	300	0.2 or Less	0.2 or Less
		5	25~ 398			3	4										-0.004 -0.012	0 -0.005	-	400	0.2 or Less	0.2 or Less
		6	25~ 798			3	4	5									-0.004 -0.012	0 -0.005	-0.010 -0.028	600	0.3 or Less	0.5 or Less
		8	25~ 998			3	4	5	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~ 998				4	5	6	8							-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~1198					5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~1198					5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~1198					5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1198					5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1198					5	6	8	10	12	16				-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1198						6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1198							8	10	12	16	20	24		-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1498							8	10	12	16	20	24		-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1498								10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	25~1498									12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	25~1498										16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

[ ! ]For O.D. tolerance f8 type, D needs to be 6 or more.

Part Number		1mm Increment			P Selection										D Tol.	(Y)Max.	R	C
Type	D	L	F	B	P Selection										g6	(Y)Max.	R	C
(D Tol. g6) Low Temp. Black Chrome Plating RSFAN	4	25~298	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 [ ! ]B≥Pitchx3	3										-0.004 -0.012	300	0.2 or Less	0.2 or Less
	5	25~398			3	4									-0.004 -0.012	400	0.2 or Less	0.2 or Less
	6	25~500			3	4	5								-0.004 -0.012	600	0.3 or Less	0.5 or Less
	8	25~500			3	4	5	6							-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8						-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12				-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12				-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16			-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16			-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

Coarse Thread Dimension
M	pitch
3	0.5
4	0.7
5	0.8
6	1.0
8	1.25
10	1.5
12	1.75
16	2.0
20	2.5
24	3.0
30	3.5

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
RSFAN4-[25-298/1]-F[2-20/1]-B[2-20/1]-P3
RSFAN4-[25-298/1]-F[2-20/1]-B[2-20/1]-PMC3
RSFAN5-[25-398/1]-F[2-25/1]-B[2-25/1]-P[3,4]
RSFAN5-[25-398/1]-F[2-25/1]-B[2-25/1]-PMC[3,4]
RSFAN6-[25-500/1]-F[2-30/1]-B[2-30/1]-P[3,4,5]
RSFAN6-[25-500/1]-F[2-30/1]-B[2-30/1]-PMC[3,4,5]
RSFAN8-[25-500/1]-F[2-40/1]-B[2-40/1]-P[3,4,5,6]
RSFAN8-[25-500/1]-F[2-40/1]-B[2-40/1]-PMC[3,4,5,6]
RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-P[4,5,6,8]
RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMC[4,5,6,8]
RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMS10
RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10]
RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10]
RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12]
RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]
RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10]
RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12]
RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]
RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12]
RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12,14]
RSFAN16-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,6,8,10,12]
RSFAN16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,6,8,10,12,15]
RSFAN16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,12,14]
RSFAN18-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,6,8,10,12,16]
RSFAN18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,6,8,10,12,15,17]
RSFAN18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,12,14,18]
RSFAN20-[25-500/1]-F[2-100/1]-B[2-100/1]-P[6,8,10,12,16]
RSFAN20-[25-500/1]-F[2-100/1]-B[2-100/1]-PMC[6,8,10,12,15,17]
RSFAN20-[25-500/1]-F[2-100/1]-B[2-100/1]-PMS[10,12,14,18]
RSFAN25-[25-500/1]-F[2-120/1]-B[2-120/1]-P[8,10,12,16,20,24]
RSFAN25-[25-500/1]-F[2-120/1]-B[2-120/1]-PMC[8,10,12,15,17,20]
RSFAN25-[25-500/1]-F[2-120/1]-B[2-120/1]-PMS[10,12,14,18]
RSFAN30-[25-500/1]-F[2-150/1]-B[2-150/1]-P[8,10,12,16,20,24]
RSFAN30-[25-500/1]-F[2-150/1]-B[2-150/1]-PMC[8,10,12,15,17,20,25]
RSFAN30-[25-500/1]-F[2-150/1]-B[2-150/1]-PMS[10,12,14,18]

Price	Minimum Order Qty.	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	B (mm)	F (mm)	Fine Thread [PMC] (mm)	Fine Thread [PMS] (mm)	P (mm)
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	4	25 ～ 298	g6	Induction Hardened (58HRC~)	2 ～ 20	2 ～ 20	-	-	3
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	4	25 ～ 298	g6	Induction Hardened (58HRC~)	2 ～ 20	2 ～ 20	3	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	5	25 ～ 398	g6	Induction Hardened (58HRC~)	2 ～ 25	2 ～ 25	-	-	3 ～ 4
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	5	25 ～ 398	g6	Induction Hardened (58HRC~)	2 ～ 25	2 ～ 25	3 ～ 4	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	6	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 30	2 ～ 30	-	-	3 ～ 5
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	6	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 30	2 ～ 30	3 ～ 5	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	8	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 40	2 ～ 40	-	-	3 ～ 6
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	8	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 40	2 ～ 40	3 ～ 6	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 50	2 ～ 50	-	-	4 ～ 8
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 50	2 ～ 50	4 ～ 8	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 50	2 ～ 50	-	10	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 60	2 ～ 60	-	-	5 ～ 10
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 60	2 ～ 60	5 ～ 10	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 60	2 ～ 60	-	10 ～ 12	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 60	2 ～ 60	-	-	5 ～ 12
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 60	2 ～ 60	5 ～ 10	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 60	2 ～ 60	-	10 ～ 12	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 60	2 ～ 60	-	-	5 ～ 12
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 60	2 ～ 60	5 ～ 12	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 60	2 ～ 60	-	10 ～ 14	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 80	2 ～ 80	-	-	5 ～ 12
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 80	2 ～ 80	5 ～ 15	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 80	2 ～ 80	-	10 ～ 14	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 80	2 ～ 80	-	-	5 ～ 16
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 80	2 ～ 80	5 ～ 17	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 80	2 ～ 80	-	10 ～ 18	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 100	2 ～ 100	-	-	6 ～ 16
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 100	2 ～ 100	6 ～ 17	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 100	2 ～ 100	-	10 ～ 18	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 120	2 ～ 120	-	-	8 ～ 24
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 120	2 ～ 120	8 ～ 20	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 120	2 ～ 120	-	10 ～ 18	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 150	2 ～ 150	-	-	8 ～ 24
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 150	2 ～ 150	8 ～ 25	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	2 ～ 150	2 ～ 150	-	10 ～ 18	-

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	No Machining
Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand

Search by Category

How can we improve?