Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(911 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

PSAFU8-[25-790/1]-F[5-18/1]-M6-T[5-18/1]-N6-SC[0-782/1]

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1490/1mm Unit(s)]
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Add Wrench Flats at One Location [SC](mm)
[0-1475/1mm Unit(s)]
Clear
Change Thread M to Fine One [MMC](mm)
6

8

10

12

15

17

20

25

30

500
Clear
Change Thread M to Fine One [MMS](mm)
10

12

14

18

500
Clear
Change Thread N to Fine One [NMC](mm)
6

8

10

12

15

17

20

25

30

500
Clear
Change Thread N to Fine One [NMS](mm)
10

12

14

18

500
Clear
F(mm)
[5-500/1mm Unit(s)]
Clear
H(mm)
[0-496/1mm Unit(s)]
Clear
T(mm)
[5-500/1mm Unit(s)]
Clear
Threaded (Coarse) [M](mm)
6

8

10

12

16

20

24

30

500
Clear
Threaded (Coarse) [N](mm)
6

8

10

12

16

20

24

30

500
Clear
type
- PSAFU
- PSAGU
- PSFFU
- PSHAM
- PSHGM
- PSSAFU
- PSSAGU
- PSSFFU
- PSSHAM
- RSAFU
- RSHAM
- SAFU
- SFFU
- SFHAM
- SSAFU
- SSFFU
- SSHAM
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

8 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole

Name: Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole
Brand: MISUMI
Availability: PreOrder

Brand :

MISUMI

Part Number :

PSAFU8-[25-790/1]-F[5-18/1]-M6-T[5-18/1]-N6-SC[0-782/1]

PSAFU8-[25-790/1]-F[5-18/1]-M6-T[5-18/1]-NMC6-SC[0-782/1]

PSAFU8-[25-790/1]-F[5-18/1]-MMC6-T[5-18/1]-N6-SC[0-782/1]

PSAFU8-[25-790/1]-F[5-18/1]-MMC6-T[5-18/1]-NMC6-SC[0-782/1]

PSAFU10-[25-790/1]-F[5-24/1]-M[6,8]-T[5-24/1]-N[6,8]-SC[0-782/1]

PSAFU10-[25-790/1]-F[5-24/1]-M[6,8]-T[5-24/1]-NMC[6,8]-SC[0-782/1]

PSAFU10-[25-790/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-N[6,8]-SC[0-782/1]

PSAFU10-[25-790/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-NMC[6,8]-SC[0-782/1]

PSAFU12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-N[6,8,10]-SC[0-980/1]

PSAFU12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-NMC[6,8,10]-SC[0-980/1]

PSAFU12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-NMS10-SC[0-980/1]

PSAFU12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-N[6,8,10]-SC[0-980/1]

PSAFU12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMC[6,8,10]-SC[0-980/1]

PSAFU12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMS10-SC[0-980/1]

PSAFU12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-N[6,8,10]-SC[0-980/1]

PSAFU12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-NMC[6,8,10]-SC[0-980/1]

PSAFU12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-NMS10-SC[0-980/1]

PSAFU13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-N[6,8,10,12]-SC[0-980/1]

PSAFU13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1]

PSAFU13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMS10-SC[0-980/1]

PSAFU8-[25-790/1]-F[5-18/1]-M6-T[5-18/1]-N6-SC[0-782/1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with male screw relief grooves on both ends, drilled hole type, and wrench groove type. L size standard expanded! You can now purchase from an even more complete lineup.

Both Ends Threaded Shafts with Undercut and Cross-Drilled Hole/Wrench Flats:Related Image

Type					[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
With Wrench Flats			With Cross-Drilled Hole
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. f8
SAFU	SFFU	-	SFHAM	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >>P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSAFU	SSFFU	-	SSHAM	-	SUS440C or 13Cr stainless		-
PSAFU	PSFFU	-	PSHAM	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSAFU	PSSFFU	-	PSSHAM	-	SUS440C or 13Cr stainless
RSAFU	-	-	RSHAM	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSAGU	-	PSHGM	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSAGU	-	-	SUS304	-

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	F	-	M	-	T	-	N	-	SC	-	H
SAFU15 SFHAM15	- -	300 300	- -	F18 F18	- -	M6 M6	- -	T17 T17	- -	N12 N12	-	SC8	-	H8

Part Number			1mm Increments		Selection								Wrench Flats Dimensions			D Tol.			(Y)Max.	C
Type		D	L	F, T	M, N (Coarse)								SC	W	ℓ₁	g6	h5	f8	(Y)Max.	C
		8	25~ 990	5≤F≤Mx3 5≤T≤Nx3 [ ! ]F-(g)≥Pitchx3 [ ! ]T-(g)≥Pitchx3	6								SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	7	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.5 or Less
(With Wrench Flats) (D Tol. g6) SAFU SSAFU PSAFU PSSAFU (D Tol. f8) PSAGU PSSAGU	(D Tol. h5) SFFU SSFFU PSFFU PSSFFU	10	25~ 990		6	8								8	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.5 or Less
		12	25~1190		6	8	10							10	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.5 or Less
		13	25~1190		6	8	10	12						11	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.5 or Less
		15	25~1190		6	8	10	12						13	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.5 or Less
		16	25~1190		6	8	10	12						14	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.5 or Less
		18	25~1190		6	8	10	12	16					16	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.5 or Less
		20	25~1190		6	8	10	12	16					17	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	1.0 or Less
		25	25~1190			8	10	12	16	20	24			22	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	1.0 or Less
		30	25~1490			8	10	12	16	20	24			27	15	-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	1.0 or Less
		35	25~1490				10	12	16	20	24	30		30	15	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	1.0 or Less
		40	25~1490					12	16	20	24	30		36	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	1.0 or Less
		50	25~1490						16	20	24	30		41	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	1.0 or Less

Part Number		1mm Increments		Selection							Wrench Flats Dimensions			D Tol.	(Y)Max.	C
Type	D	L	F, T	M, N (Coarse)							SC	W	ℓ₁	g6	(Y)Max.	C
	8	25~500	5≤F≤Mx3 5≤T≤Nx3 [ ! ]F-(g)≥Pitchx3 [ ! ]T-(g)≥Pitchx3	6							SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	7	8	-0.005 -0.014	800	0.5 or Less
(With Wrench Flats) (D Tol. g6) Low Temp. Black Chrome Plating RSAFU (Ymax≤800)	10	25~500		6	8							8	8	-0.005 -0.014	800	0.5 or Less
	12	25~500		6	8	10						10	10	-0.006 -0.017	1000	0.5 or Less
	13	25~500		6	8	10	12					11	10	-0.006 -0.017	1000	0.5 or Less
	15	25~500		6	8	10	12					13	10	-0.006 -0.017	1000	0.5 or Less
	16	25~500		6	8	10	12					14	10	-0.006 -0.017	1200	0.5 or Less
	18	25~500		6	8	10	12	16				16	10	-0.006 -0.017	1200	0.5 or Less
	20	25~500		6	8	10	12	16				17	10	-0.007 -0.020	1200	1.0 or Less
	25	25~500			8	10	12	16	20	24		22	10	-0.007 -0.020	1200	1.0 or Less
	30	25~500			8	10	12	16	20	24		27	15	-0.007 -0.020	1500	1.0 or Less

Part Number		1mm Increments		Selection							Cross-Drilled Hole Dimensions		D Tol.		(Y)Max.	C
Type	D	L	F, T	M, N (Coarse)							H	d	g6	f8	(Y)Max.	C
(With Cross-Drilled Hole) (D Tol. g6) SFHAM SSHAM PSHAM PSSHAM RSHAM (D Tol. f8) PSHGM [ ! ]D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.	10	25~500	5≤F≤Mx3 5≤T≤Nx3 [ ! ]F-(g)≥Pitchx3 [ ! ]T-(g)≥Pitchx3	6	8						H=1mm Increment [ ! ]L≥H+d/2+2 [ ! ]H≥d/2+2	3	-0.005 -0.014	-0.013 -0.035	800	0.5 or Less
	12	25~500		6	8	10						3	-0.006 -0.017	-0.016 -0.043	1000	0.5 or Less
	13	25~500		6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1000	0.5 or Less
	15	25~500		6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1000	0.5 or Less
	16	25~500		6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1200	0.5 or Less
	18	25~500		6	8	10	12	16				6	-0.006 -0.017	-0.016 -0.043	1200	0.5 or Less
	20	25~500		6	8	10	12	16				6	-0.007 -0.020	-0.020 -0.053	1200	1.0 or Less
	25	25~500			8	10	12	16	20	24		7	-0.007 -0.020	-0.020 -0.053	1200	1.0 or Less
	30	25~500			8	10	12	16	20	24		7	-0.007 -0.020	-0.020 -0.053	1500	1.0 or Less

Coarse Thread Undercut Dimensions
M N	Pitch	MC NC	(g)
6	1.0	4.4	2
8	1.25	6.0	3
10	1.5	7.7	3
12	1.75	9.4	4
16	2.0	13.0	4
20	2.5	16.4	5
24	3.0	19.6	5
30	3.5	25.0	5

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
PSAFU8-[25-790/1]-F[5-18/1]-M6-T[5-18/1]-N6-SC[0-782/1]
PSAFU8-[25-790/1]-F[5-18/1]-M6-T[5-18/1]-NMC6-SC[0-782/1]
PSAFU8-[25-790/1]-F[5-18/1]-MMC6-T[5-18/1]-N6-SC[0-782/1]
PSAFU8-[25-790/1]-F[5-18/1]-MMC6-T[5-18/1]-NMC6-SC[0-782/1]
PSAFU10-[25-790/1]-F[5-24/1]-M[6,8]-T[5-24/1]-N[6,8]-SC[0-782/1]
PSAFU10-[25-790/1]-F[5-24/1]-M[6,8]-T[5-24/1]-NMC[6,8]-SC[0-782/1]
PSAFU10-[25-790/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-N[6,8]-SC[0-782/1]
PSAFU10-[25-790/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-NMC[6,8]-SC[0-782/1]
PSAFU12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-N[6,8,10]-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-NMC[6,8,10]-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-NMS10-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-N[6,8,10]-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMC[6,8,10]-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMS10-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-N[6,8,10]-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-NMC[6,8,10]-SC[0-980/1]
PSAFU12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-NMS10-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-N[6,8,10,12]-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMS10-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-N[6,8,10,12]-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMS10-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-N[6,8,10,12]-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1]
PSAFU13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-NMS10-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-N[6,8,10,12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMS[10,12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-N[6,8,10,12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMS[10,12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-N[6,8,10,12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1]
PSAFU15-[25-990/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-NMS[10,12]-SC[0-980/1]
PSAFU16-[25-1190/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-N[6,8,10,12]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMS[10,12,14]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-N[6,8,10,12]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMS[10,12,14]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-N[6,8,10,12]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-NMC[6,8,10,12]-SC[0-1180/1]
PSAFU16-[25-1190/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-NMS[10,12,14]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-N[6,8,10,12,16]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMC[6,8,10,12,15]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMS[10,12,14]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15]-T[5-48/1]-N[6,8,10,12,16]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15]-T[5-48/1]-NMC[6,8,10,12,15]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15]-T[5-48/1]-NMS[10,12,14]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-N[6,8,10,12,16]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-NMC[6,8,10,12,15]-SC[0-1180/1]
PSAFU18-[25-1190/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-NMS[10,12,14]-SC[0-1180/1]
PSAFU20-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-N[6,8,10,12,16]-SC[0-1180/1]
PSAFU20-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMC[6,8,10,12,15,17]-SC[0-1180/1]
PSAFU20-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMS[10,12,14,18]-SC[0-1180/1]
PSAFU20-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-N[6,8,10,12,16]-SC[0-1180/1]
PSAFU20-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMC[6,8,10,12,15,17]-SC[0-1180/1]
PSAFU20-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMS[10,12,14,18]-SC[0-1180/1]
PSAFU20-[25-1190/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-N[6,8,10,12,16]-SC[0-1180/1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Add Wrench Flats at One Location [SC] (mm)	Change Thread M to Fine One [MMC] (mm)	Change Thread M to Fine One [MMS] (mm)	Change Thread N to Fine One [NMC] (mm)	Change Thread N to Fine One [NMS] (mm)	F (mm)	H (mm)	T (mm)	Threaded (Coarse) [M] (mm)	Threaded (Coarse) [N] (mm)
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 790	g6	Induction Hardened (58HRC~)	0 ～ 782	-	-	-	-	5 ～ 18	-	5 ～ 18	6	6
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 790	g6	Induction Hardened (58HRC~)	0 ～ 782	-	-	6	-	5 ～ 18	-	5 ～ 18	6	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 790	g6	Induction Hardened (58HRC~)	0 ～ 782	6	-	-	-	5 ～ 18	-	5 ～ 18	-	6
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 790	g6	Induction Hardened (58HRC~)	0 ～ 782	6	-	6	-	5 ～ 18	-	5 ～ 18	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 790	g6	Induction Hardened (58HRC~)	0 ～ 782	-	-	-	-	5 ～ 24	-	5 ～ 24	6 ～ 8	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 790	g6	Induction Hardened (58HRC~)	0 ～ 782	-	-	6 ～ 8	-	5 ～ 24	-	5 ～ 24	6 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 790	g6	Induction Hardened (58HRC~)	0 ～ 782	6 ～ 8	-	-	-	5 ～ 24	-	5 ～ 24	-	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 790	g6	Induction Hardened (58HRC~)	0 ～ 782	6 ～ 8	-	6 ～ 8	-	5 ～ 24	-	5 ～ 24	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	-	-	-	5 ～ 30	-	5 ～ 30	6 ～ 10	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	-	6 ～ 10	-	5 ～ 30	-	5 ～ 30	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	-	-	10	5 ～ 30	-	5 ～ 30	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	6 ～ 10	-	-	-	5 ～ 30	-	5 ～ 30	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	6 ～ 10	-	6 ～ 10	-	5 ～ 30	-	5 ～ 30	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	6 ～ 10	-	-	10	5 ～ 30	-	5 ～ 30	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	10	-	-	5 ～ 30	-	5 ～ 30	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	10	6 ～ 10	-	5 ～ 30	-	5 ～ 30	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	10	-	10	5 ～ 30	-	5 ～ 30	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	-	-	-	5 ～ 36	-	5 ～ 36	6 ～ 12	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	-	6 ～ 12	-	5 ～ 36	-	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	-	-	10	5 ～ 36	-	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	6 ～ 12	-	-	-	5 ～ 36	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	6 ～ 12	-	6 ～ 12	-	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	6 ～ 12	-	-	10	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	10	-	-	5 ～ 36	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	10	6 ～ 12	-	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	10	-	10	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	-	-	-	5 ～ 36	-	5 ～ 36	6 ～ 12	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	-	6 ～ 12	-	5 ～ 36	-	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	-	-	10 ～ 12	5 ～ 36	-	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	6 ～ 12	-	-	-	5 ～ 36	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	6 ～ 12	-	6 ～ 12	-	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	6 ～ 12	-	-	10 ～ 12	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	10 ～ 12	-	-	5 ～ 36	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	10 ～ 12	6 ～ 12	-	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	0 ～ 980	-	10 ～ 12	-	10 ～ 12	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	-	-	-	5 ～ 36	-	5 ～ 36	6 ～ 12	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	-	6 ～ 12	-	5 ～ 36	-	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	-	-	10 ～ 14	5 ～ 36	-	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	6 ～ 12	-	-	-	5 ～ 36	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	6 ～ 12	-	6 ～ 12	-	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	6 ～ 12	-	-	10 ～ 14	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	10 ～ 14	-	-	5 ～ 36	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	10 ～ 14	6 ～ 12	-	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	10 ～ 14	-	10 ～ 14	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	-	-	-	5 ～ 48	-	5 ～ 48	6 ～ 16	6 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	-	6 ～ 15	-	5 ～ 48	-	5 ～ 48	6 ～ 16	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	-	-	10 ～ 14	5 ～ 48	-	5 ～ 48	6 ～ 16	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	6 ～ 15	-	-	-	5 ～ 48	-	5 ～ 48	-	6 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	6 ～ 15	-	6 ～ 15	-	5 ～ 48	-	5 ～ 48	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	6 ～ 15	-	-	10 ～ 14	5 ～ 48	-	5 ～ 48	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	10 ～ 14	-	-	5 ～ 48	-	5 ～ 48	-	6 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	10 ～ 14	6 ～ 15	-	5 ～ 48	-	5 ～ 48	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	10 ～ 14	-	10 ～ 14	5 ～ 48	-	5 ～ 48	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	-	-	-	5 ～ 48	-	5 ～ 48	6 ～ 16	6 ～ 16
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	-	6 ～ 17	-	5 ～ 48	-	5 ～ 48	6 ～ 16	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	-	-	10 ～ 18	5 ～ 48	-	5 ～ 48	6 ～ 16	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	6 ～ 17	-	-	-	5 ～ 48	-	5 ～ 48	-	6 ～ 16
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	6 ～ 17	-	6 ～ 17	-	5 ～ 48	-	5 ～ 48	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	6 ～ 17	-	-	10 ～ 18	5 ～ 48	-	5 ～ 48	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	0 ～ 1180	-	10 ～ 18	-	-	5 ～ 48	-	5 ～ 48	-	6 ～ 16

1
2
3
4
5
Next >>

Example

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	Threaded
Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?

Configure

Specification/Dimensions

Material

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Hardness

Add Wrench Flats at One Location [SC](mm)

Change Thread M to Fine One [MMC](mm)

Change Thread M to Fine One [MMS](mm)

Change Thread N to Fine One [NMC](mm)

Change Thread N to Fine One [NMS](mm)

F(mm)

H(mm)

T(mm)

Threaded (Coarse) [M](mm)

Threaded (Coarse) [N](mm)

type

Shaft Fit Tolerance

CAD

Days to Ship

Specify Alterations

Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole

Copy Part Number URL to Clipboard

Product Description

Specifications

Alterations

Part Number

Example

Basic Information

Payment Method

Customer Service

My Account

About MISUMI

Related Sites

Social Media

MISUMI India Contact

Customer Service

日本語でのお問い合わせはジャパンデスクまで