Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 to 18:30 (IST) 16/6/2024. We apologize for the inconvenience.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(158 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

RSFAU6-[25-500/1]-F[2-30/1]-B[2-30/1]-P[3,4,5]-T[2-30/1]-S[0-30/1]-Q[3,4,5]-SC[0-498/1]

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Shaft Dia. D(Ø)
6

8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-500/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Add Wrench Flats at One Location [SC](mm)
[0-498/1mm Unit(s)]
Clear
B(mm)
[2-150/1mm Unit(s)]
Clear
F(mm)
[2-150/1mm Unit(s)]
Clear
Fine Thread [PMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
Fine Thread [PMS](mm)
10

12

14

18
Clear
Fine Thread [QMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
Fine Thread [QMS](mm)
10

12

14

18
Clear
H(mm)
[0-496/1mm Unit(s)]
Clear
P(mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Q(mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
S(mm)
[0-150/1mm Unit(s)]
Clear
T(mm)
[2-150/1mm Unit(s)]
Clear
type
- PSFAU
- PSFGU
- PSFHM
- PSFUU
- PSGHM
- PSSFAU
- PSSFGU
- PSSFHM
- PSSFUU
- RSFAU
- RSFHM
- SFAU
- SFHM
- SFUU
- SSFAU
- SSFHM
- SSFUU
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

8 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole

Name: Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole
Brand: MISUMI

Brand :

MISUMI

Part Number :

RSFAU6-[25-500/1]-F[2-30/1]-B[2-30/1]-P[3,4,5]-T[2-30/1]-S[0-30/1]-Q[3,4,5]-SC[0-498/1]

RSFAU6-[25-500/1]-F[2-30/1]-B[2-30/1]-P[3,4,5]-T[2-30/1]-S[0-30/1]-QMC[3,4,5]-SC[0-498/1]

RSFAU6-[25-500/1]-F[2-30/1]-B[2-30/1]-PMC[3,4,5]-T[2-30/1]-S[0-30/1]-Q[3,4,5]-SC[0-498/1]

RSFAU6-[25-500/1]-F[2-30/1]-B[2-30/1]-PMC[3,4,5]-T[2-30/1]-S[0-30/1]-QMC[3,4,5]-SC[0-498/1]

RSFAU8-[25-500/1]-F[2-40/1]-B[2-40/1]-P[3,4,5,6]-T[2-40/1]-S[0-40/1]-Q[3,4,5,6]-SC[0-498/1]

RSFAU8-[25-500/1]-F[2-40/1]-B[2-40/1]-P[3,4,5,6]-T[2-40/1]-S[0-40/1]-QMC[3,4,5,6]-SC[0-498/1]

RSFAU8-[25-500/1]-F[2-40/1]-B[2-40/1]-PMC[3,4,5,6]-T[2-40/1]-S[0-40/1]-Q[3,4,5,6]-SC[0-498/1]

RSFAU8-[25-500/1]-F[2-40/1]-B[2-40/1]-PMC[3,4,5,6]-T[2-40/1]-S[0-40/1]-QMC[3,4,5,6]-SC[0-498/1]

RSFAU10-[25-500/1]-F[2-50/1]-B[2-50/1]-P[4,5,6,8]-T[2-50/1]-S[0-50/1]-Q[4,5,6,8]-SC[0-498/1]

RSFAU10-[25-500/1]-F[2-50/1]-B[2-50/1]-P[4,5,6,8]-T[2-50/1]-S[0-50/1]-QMC[4,5,6,8]-SC[0-498/1]

RSFAU10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMC[4,5,6,8]-T[2-50/1]-S[0-50/1]-Q[4,5,6,8]-SC[0-498/1]

RSFAU10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMC[4,5,6,8]-T[2-50/1]-S[0-50/1]-QMC[4,5,6,8]-SC[0-498/1]

RSFAU12-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10]-T[2-60/1]-S[0-60/1]-Q[5,6,8,10]-SC[0-498/1]

RSFAU12-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10]-T[2-60/1]-S[0-60/1]-QMC[5,6,8,10]-SC[0-498/1]

RSFAU12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10]-T[2-60/1]-S[0-60/1]-Q[5,6,8,10]-SC[0-498/1]

RSFAU12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10]-T[2-60/1]-S[0-60/1]-QMC[5,6,8,10]-SC[0-498/1]

RSFAU12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS10-T[2-60/1]-S[0-60/1]-Q[5,6,8,10]-SC[0-498/1]

RSFAU12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS10-T[2-60/1]-S[0-60/1]-QMC[5,6,8,10]-SC[0-498/1]

RSFAU13-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]-T[2-60/1]-S[0-60/1]-Q[5,6,8,10,12]-SC[0-498/1]

RSFAU13-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]-T[2-60/1]-S[0-60/1]-QMC[5,6,8,10,12]-SC[0-498/1]

RSFAU6-[25-500/1]-F[2-30/1]-B[2-30/1]-P[3,4,5]-T[2-30/1]-S[0-30/1]-Q[3,4,5]-SC[0-498/1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with male screw holes on both ends and spanner grooves. L size standard expanded! You can now purchase from an even more complete lineup.

Both Ends Threaded with Wrench Flats/Cross-Drilled Hole:Related Image

Type					[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
With Wrench Flats			With Cross-Drilled Hole
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. f8
SFAU	SFUU	-	SFHM	-	SUJ2 Equivalent	For Effective Hardened Depth of Induction Hardening P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSFAU	SSFUU	-	SSFHM	-	SUS440C or 13Cr stainless		-
PSFAU	PSFUU	-	PSFHM	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFAU	PSSFUU	-	PSSFHM	-	SUS440C or 13Cr stainless
RSFAU	-	-	RSFHM	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGU	-	PSGHM	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSFGU	-	-	SUS304	-

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	F	-	B	-	P	-	T	-	S	-	Q	-	SC	-	H
SFHM15	-	300	-	F28	-	B16	-	P6	-	T17	-	S12	-	Q12			-	H8

Part Number			1mm Increments			P,Q Selection											Wrench Flats Dimensions			D Tol.			(Y)Max.	R	C
Type		D	L	F, T	B, S	P,Q Selection											SC	W	ℓ₁	g6	h5	f8	(Y)Max.	R	C
(With Wrench Flats) (D Tol. g6) SFAU SSFAU PSFAU PSSFAU RSFAU (D≤30,L≤500,Ymax≤800) (D Tol. f8) PSFGU PSSFGU	(D Tol. h5) SFUU SSFUU PSFUU PSSFUU	6	25~ 796	2≤F≤Px5 2≤T≤Qx5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (When Q≤6) S≤T-2 (When Q=8, 10) S≤T-3 (When Q≥12) S≤T-5 (W/o Threads) B=0 S=0 [ ! ]B, S≥Pitchx3	3	4	5									SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	5	8	-0.004 -0.012	0 -0.005	-0.010 -0.028	600	0.3 or Less	0.5 or Less
		8	25~ 996			3	4	5	6									7	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~ 996				4	5	6	8								8	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~1196					5	6	8	10							10	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~1196					5	6	8	10	12						11	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~1196					5	6	8	10	12						13	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1196					5	6	8	10	12						14	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1196					5	6	8	10	12	16					16	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1196						6	8	10	12	16					17	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1196							8	10	12	16	20	24			22	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1496							8	10	12	16	20	24			27	15	-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1496								10	12	16	20	24	30		30	15	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	25~1496									12	16	20	24	30		36	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	25~1496										16	20	24	30		41	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Part Number		1mm Increments			P,Q Selection										Cross-Drilled Hole Dimensions		D Tol.		(Y)Max.	R	C
Type	D	L	F, T	B, S	P,Q Selection										H	d	g6	f8	(Y)Max.	R	C
(With Cross-Drilled Hole) (D Tol. g6) SFHM SSFHM PSFHM PSSFHM RSFHM (D Tol. f8) PSGHM [ ! ]8≤D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.	8	25~500	2≤F≤Px5 2≤T≤Qx5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (When Q≤6) S≤T-2 (When Q=8, 10) S≤T-3 (When Q≥12) S≤T-5 (W/o Threads) B=0 S=0 [ ! ]B, S≥Pitchx3	3	4	5	6							H=1mm Increment [ ! ]L≥H+d/2+2 [ ! ]H≥d/2+2	3	-0.005 -0.014	-0.013 -0.035	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8							3	-0.005 -0.014	-0.013 -0.035	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10						3	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16				6	-0.006 -0.017	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16				6	-0.007 -0.020	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24		7	-0.007 -0.020	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24		7	-0.007 -0.020	-0.020 -0.053	1500	0.3 or Less	1.0 or Less

Part Number		1mm Increments			P,Q Selection										Wrench Flats Dimensions			D Tol.	(Y)Max.	R	C
Type	D	L	F, T	B, S	P,Q Selection										SC	W	ℓ₁	g6	(Y)Max.	R	C
(With Wrench Flats) (D Tol. g6) Low Temp. Black Chrome Plating RSFAU (Ymax≤800)	6	25~500	2≤F≤Px5 2≤T≤Qx5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (When Q≤6) S≤T-2 (When Q=8, 10) S≤T-3 (When Q≥12) S≤T-5 (W/o Threads) B=0 S=0 [ ! ]B, S≥Pitchx3	3	4	5								SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	5	8	-0.004 -0.012	600	0.3 or Less	0.5 or Less
	8	25~500			3	4	5	6								7	8	-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8							8	8	-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10						10	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12					11	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12					13	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12					14	10	-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16				16	10	-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16				17	10	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24		22	10	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24		27	15	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

[ ! ]Thread machining will not be applied to B=0 or S=0.

Coarse Thread Dimension
M	Pitch
3	0.5
4	0.7
5	0.8
6	1.0
8	1.25
10	1.5
12	1.75
16	2.0
20	2.5
24	3.0
30	3.5

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
RSFAU6-[25-500/1]-F[2-30/1]-B[2-30/1]-P[3,4,5]-T[2-30/1]-S[0-30/1]-Q[3,4,5]-SC[0-498/1]
RSFAU6-[25-500/1]-F[2-30/1]-B[2-30/1]-P[3,4,5]-T[2-30/1]-S[0-30/1]-QMC[3,4,5]-SC[0-498/1]
RSFAU6-[25-500/1]-F[2-30/1]-B[2-30/1]-PMC[3,4,5]-T[2-30/1]-S[0-30/1]-Q[3,4,5]-SC[0-498/1]
RSFAU6-[25-500/1]-F[2-30/1]-B[2-30/1]-PMC[3,4,5]-T[2-30/1]-S[0-30/1]-QMC[3,4,5]-SC[0-498/1]
RSFAU8-[25-500/1]-F[2-40/1]-B[2-40/1]-P[3,4,5,6]-T[2-40/1]-S[0-40/1]-Q[3,4,5,6]-SC[0-498/1]
RSFAU8-[25-500/1]-F[2-40/1]-B[2-40/1]-P[3,4,5,6]-T[2-40/1]-S[0-40/1]-QMC[3,4,5,6]-SC[0-498/1]
RSFAU8-[25-500/1]-F[2-40/1]-B[2-40/1]-PMC[3,4,5,6]-T[2-40/1]-S[0-40/1]-Q[3,4,5,6]-SC[0-498/1]
RSFAU8-[25-500/1]-F[2-40/1]-B[2-40/1]-PMC[3,4,5,6]-T[2-40/1]-S[0-40/1]-QMC[3,4,5,6]-SC[0-498/1]
RSFAU10-[25-500/1]-F[2-50/1]-B[2-50/1]-P[4,5,6,8]-T[2-50/1]-S[0-50/1]-Q[4,5,6,8]-SC[0-498/1]
RSFAU10-[25-500/1]-F[2-50/1]-B[2-50/1]-P[4,5,6,8]-T[2-50/1]-S[0-50/1]-QMC[4,5,6,8]-SC[0-498/1]
RSFAU10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMC[4,5,6,8]-T[2-50/1]-S[0-50/1]-Q[4,5,6,8]-SC[0-498/1]
RSFAU10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMC[4,5,6,8]-T[2-50/1]-S[0-50/1]-QMC[4,5,6,8]-SC[0-498/1]
RSFAU12-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10]-T[2-60/1]-S[0-60/1]-Q[5,6,8,10]-SC[0-498/1]
RSFAU12-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10]-T[2-60/1]-S[0-60/1]-QMC[5,6,8,10]-SC[0-498/1]
RSFAU12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10]-T[2-60/1]-S[0-60/1]-Q[5,6,8,10]-SC[0-498/1]
RSFAU12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10]-T[2-60/1]-S[0-60/1]-QMC[5,6,8,10]-SC[0-498/1]
RSFAU12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS10-T[2-60/1]-S[0-60/1]-Q[5,6,8,10]-SC[0-498/1]
RSFAU12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS10-T[2-60/1]-S[0-60/1]-QMC[5,6,8,10]-SC[0-498/1]
RSFAU13-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]-T[2-60/1]-S[0-60/1]-Q[5,6,8,10,12]-SC[0-498/1]
RSFAU13-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]-T[2-60/1]-S[0-60/1]-QMC[5,6,8,10,12]-SC[0-498/1]
RSFAU13-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]-T[2-60/1]-S[0-60/1]-QMS[10,12]-SC[0-498/1]
RSFAU13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12]-T[2-60/1]-S[0-60/1]-Q[5,6,8,10,12]-SC[0-498/1]
RSFAU13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12]-T[2-60/1]-S[0-60/1]-QMC[5,6,8,10,12]-SC[0-498/1]
RSFAU13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12]-T[2-60/1]-S[0-60/1]-QMS[10,12]-SC[0-498/1]
RSFAU13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12]-T[2-60/1]-S[0-60/1]-Q[5,6,8,10,12]-SC[0-498/1]
RSFAU13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12]-T[2-60/1]-S[0-60/1]-QMC[5,6,8,10,12]-SC[0-498/1]
RSFAU13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12]-T[2-60/1]-S[0-60/1]-QMS[10,12]-SC[0-498/1]
RSFAU15-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]-T[2-60/1]-S[0-60/1]-Q[5,6,8,10,12]-SC[0-498/1]
RSFAU15-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]-T[2-60/1]-S[0-60/1]-QMC[5,6,8,10,12]-SC[0-498/1]
RSFAU15-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]-T[2-60/1]-S[0-60/1]-QMS[10,12,14]-SC[0-498/1]
RSFAU15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12]-T[2-60/1]-S[0-60/1]-Q[5,6,8,10,12]-SC[0-498/1]
RSFAU15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12]-T[2-60/1]-S[0-60/1]-QMC[5,6,8,10,12]-SC[0-498/1]
RSFAU15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12]-T[2-60/1]-S[0-60/1]-QMS[10,12,14]-SC[0-498/1]
RSFAU15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12,14]-T[2-60/1]-S[0-60/1]-Q[5,6,8,10,12]-SC[0-498/1]
RSFAU15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12,14]-T[2-60/1]-S[0-60/1]-QMC[5,6,8,10,12]-SC[0-498/1]
RSFAU15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12,14]-T[2-60/1]-S[0-60/1]-QMS[10,12,14]-SC[0-498/1]
RSFAU16-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,6,8,10,12]-T[2-80/1]-S[0-80/1]-Q[5,6,8,10,12]-SC[0-498/1]
RSFAU16-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,6,8,10,12]-T[2-80/1]-S[0-80/1]-QMC[5,6,8,10,12,15]-SC[0-498/1]
RSFAU16-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,6,8,10,12]-T[2-80/1]-S[0-80/1]-QMS[10,12,14]-SC[0-498/1]
RSFAU16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,6,8,10,12,15]-T[2-80/1]-S[0-80/1]-Q[5,6,8,10,12]-SC[0-498/1]
RSFAU16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,6,8,10,12,15]-T[2-80/1]-S[0-80/1]-QMC[5,6,8,10,12,15]-SC[0-498/1]
RSFAU16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,6,8,10,12,15]-T[2-80/1]-S[0-80/1]-QMS[10,12,14]-SC[0-498/1]
RSFAU16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,12,14]-T[2-80/1]-S[0-80/1]-Q[5,6,8,10,12]-SC[0-498/1]
RSFAU16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,12,14]-T[2-80/1]-S[0-80/1]-QMC[5,6,8,10,12,15]-SC[0-498/1]
RSFAU16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,12,14]-T[2-80/1]-S[0-80/1]-QMS[10,12,14]-SC[0-498/1]
RSFAU18-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,6,8,10,12,16]-T[2-80/1]-S[0-80/1]-Q[5,6,8,10,12,16]-SC[0-498/1]
RSFAU18-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,6,8,10,12,16]-T[2-80/1]-S[0-80/1]-QMC[5,6,8,10,12,15,17]-SC[0-498/1]
RSFAU18-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,6,8,10,12,16]-T[2-80/1]-S[0-80/1]-QMS[10,12,14,18]-SC[0-498/1]
RSFAU18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,6,8,10,12,15,17]-T[2-80/1]-S[0-80/1]-Q[5,6,8,10,12,16]-SC[0-498/1]
RSFAU18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,6,8,10,12,15,17]-T[2-80/1]-S[0-80/1]-QMC[5,6,8,10,12,15,17]-SC[0-498/1]
RSFAU18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,6,8,10,12,15,17]-T[2-80/1]-S[0-80/1]-QMS[10,12,14,18]-SC[0-498/1]
RSFAU18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,12,14]-T[2-80/1]-S[0-80/1]-Q[5,6,8,10,12,16]-SC[0-498/1]
RSFAU18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,12,14]-T[2-80/1]-S[0-80/1]-QMC[5,6,8,10,12,15,17]-SC[0-498/1]
RSFAU18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,12,14]-T[2-80/1]-S[0-80/1]-QMS[10,12,14,18]-SC[0-498/1]
RSFAU20-[25-500/1]-F[2-100/1]-B[2-100/1]-P[6,8,10,12,16]-T[2-100/1]-S[0-100/1]-Q[6,8,10,12,16]-SC[0-498/1]
RSFAU20-[25-500/1]-F[2-100/1]-B[2-100/1]-P[6,8,10,12,16]-T[2-100/1]-S[0-100/1]-QMC[6,8,10,12,15,17]-SC[0-498/1]
RSFAU20-[25-500/1]-F[2-100/1]-B[2-100/1]-P[6,8,10,12,16]-T[2-100/1]-S[0-100/1]-QMS[10,12,14,18]-SC[0-498/1]
RSFAU20-[25-500/1]-F[2-100/1]-B[2-100/1]-PMC[6,8,10,12,15,17]-T[2-100/1]-S[0-100/1]-Q[6,8,10,12,16]-SC[0-498/1]
RSFAU20-[25-500/1]-F[2-100/1]-B[2-100/1]-PMC[6,8,10,12,15,17]-T[2-100/1]-S[0-100/1]-QMC[6,8,10,12,15,17]-SC[0-498/1]
RSFAU20-[25-500/1]-F[2-100/1]-B[2-100/1]-PMC[6,8,10,12,15,17]-T[2-100/1]-S[0-100/1]-QMS[10,12,14,18]-SC[0-498/1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Add Wrench Flats at One Location [SC] (mm)	B (mm)	F (mm)	Fine Thread [PMC] (mm)	Fine Thread [PMS] (mm)	Fine Thread [QMC] (mm)	Fine Thread [QMS] (mm)	H (mm)	P (mm)	Q (mm)	S (mm)	T (mm)
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	6	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 30	2 ～ 30	-	-	-	-	-	3 ～ 5	3 ～ 5	0 ～ 30	2 ～ 30
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	6	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 30	2 ～ 30	-	-	3 ～ 5	-	-	3 ～ 5	-	0 ～ 30	2 ～ 30
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	6	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 30	2 ～ 30	3 ～ 5	-	-	-	-	-	3 ～ 5	0 ～ 30	2 ～ 30
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	6	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 30	2 ～ 30	3 ～ 5	-	3 ～ 5	-	-	-	-	0 ～ 30	2 ～ 30
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	8	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 40	2 ～ 40	-	-	-	-	-	3 ～ 6	3 ～ 6	0 ～ 40	2 ～ 40
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	8	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 40	2 ～ 40	-	-	3 ～ 6	-	-	3 ～ 6	-	0 ～ 40	2 ～ 40
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	8	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 40	2 ～ 40	3 ～ 6	-	-	-	-	-	3 ～ 6	0 ～ 40	2 ～ 40
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	8	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 40	2 ～ 40	3 ～ 6	-	3 ～ 6	-	-	-	-	0 ～ 40	2 ～ 40
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 50	2 ～ 50	-	-	-	-	-	4 ～ 8	4 ～ 8	0 ～ 50	2 ～ 50
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 50	2 ～ 50	-	-	4 ～ 8	-	-	4 ～ 8	-	0 ～ 50	2 ～ 50
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 50	2 ～ 50	4 ～ 8	-	-	-	-	-	4 ～ 8	0 ～ 50	2 ～ 50
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 50	2 ～ 50	4 ～ 8	-	4 ～ 8	-	-	-	-	0 ～ 50	2 ～ 50
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	-	-	-	-	5 ～ 10	5 ～ 10	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	-	5 ～ 10	-	-	5 ～ 10	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	5 ～ 10	-	-	-	-	-	5 ～ 10	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	5 ～ 10	-	5 ～ 10	-	-	-	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	10	-	-	-	-	5 ～ 10	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	10	5 ～ 10	-	-	-	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	-	-	-	-	5 ～ 12	5 ～ 12	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	-	5 ～ 12	-	-	5 ～ 12	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	-	-	10 ～ 12	-	5 ～ 12	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	5 ～ 12	-	-	-	-	-	5 ～ 12	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	5 ～ 12	-	5 ～ 12	-	-	-	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	5 ～ 12	-	-	10 ～ 12	-	-	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	10 ～ 12	-	-	-	-	5 ～ 12	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	10 ～ 12	5 ～ 12	-	-	-	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	10 ～ 12	-	10 ～ 12	-	-	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	-	-	-	-	5 ～ 12	5 ～ 12	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	-	5 ～ 12	-	-	5 ～ 12	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	-	-	10 ～ 14	-	5 ～ 12	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	5 ～ 12	-	-	-	-	-	5 ～ 12	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	5 ～ 12	-	5 ～ 12	-	-	-	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	5 ～ 12	-	-	10 ～ 14	-	-	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	10 ～ 14	-	-	-	-	5 ～ 12	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	10 ～ 14	5 ～ 12	-	-	-	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 60	2 ～ 60	-	10 ～ 14	-	10 ～ 14	-	-	-	0 ～ 60	2 ～ 60
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	-	-	-	-	-	5 ～ 12	5 ～ 12	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	-	-	5 ～ 15	-	-	5 ～ 12	-	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	-	-	-	10 ～ 14	-	5 ～ 12	-	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	5 ～ 15	-	-	-	-	-	5 ～ 12	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	5 ～ 15	-	5 ～ 15	-	-	-	-	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	5 ～ 15	-	-	10 ～ 14	-	-	-	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	-	10 ～ 14	-	-	-	-	5 ～ 12	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	-	10 ～ 14	5 ～ 15	-	-	-	-	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	-	10 ～ 14	-	10 ～ 14	-	-	-	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	-	-	-	-	-	5 ～ 16	5 ～ 16	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	-	-	5 ～ 17	-	-	5 ～ 16	-	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	-	-	-	10 ～ 18	-	5 ～ 16	-	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	5 ～ 17	-	-	-	-	-	5 ～ 16	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	5 ～ 17	-	5 ～ 17	-	-	-	-	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	5 ～ 17	-	-	10 ～ 18	-	-	-	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	-	10 ～ 14	-	-	-	-	5 ～ 16	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	-	10 ～ 14	5 ～ 17	-	-	-	-	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 80	2 ～ 80	-	10 ～ 14	-	10 ～ 18	-	-	-	0 ～ 80	2 ～ 80
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 100	2 ～ 100	-	-	-	-	-	6 ～ 16	6 ～ 16	0 ～ 100	2 ～ 100
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 100	2 ～ 100	-	-	6 ～ 17	-	-	6 ～ 16	-	0 ～ 100	2 ～ 100
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 100	2 ～ 100	-	-	-	10 ～ 18	-	6 ～ 16	-	0 ～ 100	2 ～ 100
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 100	2 ～ 100	6 ～ 17	-	-	-	-	-	6 ～ 16	0 ～ 100	2 ～ 100
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 100	2 ～ 100	6 ～ 17	-	6 ～ 17	-	-	-	-	0 ～ 100	2 ～ 100
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	0 ～ 498	0 ～ 100	2 ～ 100	6 ～ 17	-	-	10 ～ 18	-	-	-	0 ～ 100	2 ～ 100

Example

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	Threaded
Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand

Search by Category

How can we improve?

Configure

Specification/Dimensions

Material

Heat Treatment

Shaft Dia. D(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

Add Wrench Flats at One Location [SC](mm)

B(mm)

F(mm)

Fine Thread [PMC](mm)

Fine Thread [PMS](mm)

Fine Thread [QMC](mm)

Fine Thread [QMS](mm)

H(mm)

P(mm)

Q(mm)

S(mm)

T(mm)

type

Surface Treatment

CAD

Days to Ship

Specify Alterations

Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole

Copy Part Number URL to Clipboard

Product Description

Specifications

Alterations

Part Number

Example

Basic Information

Payment Method

Customer Service

My Account

About MISUMI

Related Sites

Social Media

MISUMI India Contact

Customer Service

日本語でのお問い合わせはジャパンデスクまで