Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(879 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

PSFAZ6-[25-598/1]-F[2-30/1]-B[0-28/1]-P[3,4,5,6]-N3-SC[0-590/1]

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
6

8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1498/1mm Unit(s)]
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Add Wrench Flats at One Location [SC](mm)
[0-1483/1mm Unit(s)]
Clear
B(mm)
[0-147/1mm Unit(s)]
Clear
Change Tapped Thread N to Fine One [NSC](mm)
8

10

12

14

18
Clear
F(mm)
[2-150/1mm Unit(s)]
Clear
Fine Thread [PMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
Fine Thread [PMS](mm)
10

12

14

16

18
Clear
H(mm)
[0-496/1mm Unit(s)]
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)
6

8

10

12

16

20
Clear
Threaded (Coarse) [P](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
type
- PSFAZ
- PSFZH
- PSFZU
- PSGGZ
- PSGZH
- PSSFAZ
- PSSFZH
- PSSFZU
- PSSGGZ
- RSFAZ
- RSFZH
- SFAZ
- SFZH
- SFZU
- SSFAZ
- SSFZH
- SSFZU
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

8 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Linear Shafts-One Ends Threaded (Part Number)

Name: Linear Shafts-One Ends Threaded
Brand: MISUMI
Availability: PreOrder

Brand :

MISUMI

Part Number :

PSFAZ6-[25-598/1]-F[2-30/1]-B[0-28/1]-P[3,4,5,6]-N3-SC[0-590/1]

PSFAZ6-[25-598/1]-F[2-30/1]-B[0-28/1]-PMC[3,4,5,6]-N3-SC[0-590/1]

PSFAZ8-[25-798/1]-F[2-40/1]-B[0-38/1]-P[3,4,5,6,8]-N[3,4,5]-SC[0-790/1]

PSFAZ8-[25-798/1]-F[2-40/1]-B[0-38/1]-PMC[3,4,5,6,8]-N[3,4,5]-SC[0-790/1]

PSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-P[4,5,6,8,10]-N[3,4,5,6]-SC[0-780/1]

PSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-P[4,5,6,8,10]-ND6-SC[0-780/1]

PSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-PMC[4,5,6,8,10]-N[3,4,5,6]-SC[0-780/1]

PSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-PMC[4,5,6,8,10]-ND6-SC[0-780/1]

PSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-PMS10-N[3,4,5,6]-SC[0-780/1]

PSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-PMS10-ND6-SC[0-780/1]

PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-N[4,5,6,8]-SC[0-988/1]

PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-ND[6,8]-SC[0-988/1]

PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-NSC8-SC[0-988/1]

PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-N[4,5,6,8]-SC[0-988/1]

PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-ND[6,8]-SC[0-988/1]

PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-NSC8-SC[0-988/1]

PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-N[4,5,6,8]-SC[0-988/1]

PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-ND[6,8]-SC[0-988/1]

PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-NSC8-SC[0-988/1]

PSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-N[4,5,6,8]-SC[0-988/1]

PSFAZ6-[25-598/1]-F[2-30/1]-B[0-28/1]-P[3,4,5,6]-N3-SC[0-590/1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features] Direct-acting shafts (linear shafts, hardened shafts, guide shafts, slide shafts) are male threaded on one end, female threaded on one end with a drilled hole, and have a spanner groove.

Linear Shafts-Both Ends Threaded:Related Image

Type					[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
With Wrench Flats			With Cross-Drilled Hole
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. f8
SFAZ	SFZU	-	SFZH	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent 58HRC~ SUS440C or 13Cr stainless 56HRC~	-
SSFAZ	SSFZU	-	SSFZH	-	SUS440C or 13Cr stainless		-
PSFAZ	PSFZU	-	PSFZH	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFAZ	PSSFZU	-	PSSFZH	-	SUS440C or 13Cr stainless
RSFAZ	-	-	RSFZH	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSGGZ	-	PSGZH	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSGGZ	-		SUS304	-

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	F	-	B	-	P	-	N	-	SC	-	H
SFAZ20 SSFZH20	- -	277 277	- -	F25 F25	- -	B12 B12	- -	P10 P10	- -	N12 N12	-	SC10	-	H10

Part Number			1mm Increments			P (Coarse) Selection											N (Coarse) Selection											Wrench Flats Dimensions			D Tol.			(Y)Max.	R	C
Type		D	L	F	B	P (Coarse) Selection											N (Coarse) Selection											SC	W	ℓ₁	g6	h5	f8	(Y)Max.	R	C
(With Wrench Flats) (D Tol. g6) SFAZ SSFAZ PSFAZ PSSFAZ (D Tol. f8)PSGGZ PSSGGZ	(D Tol. h5) SFZU SSFZU PSFZU PSSFZU	6	25~798	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 [ ! ]B≥Pitchx3	3	4	5	6								3											SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >>P.142	5	8	-0.004 -0.012	0 -0.005	-0.010 -0.028	600	0.3 or Less	0.5 or Less
		8	25~998			3	4	5	6	8							3	4	5										7	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~998				4	5	6	8	10						3	4	5	6									8	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~1198					5	6	8	10	12						4	5	6	8								10	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~1198					5	6	8	10	12						4	5	6	8								11	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~1198					5	6	8	10	12						4	5	6	8	10							13	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1198					5	6	8	10	12	16					4	5	6	8	10							14	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1198					5	6	8	10	12	16					4	5	6	8	10	12						16	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1198						6	8	10	12	16	20				4	5	6	8	10	12						17	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1198							8	10	12	16	20	24			4	5	6	8	10	12	16					22	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1498							8	10	12	16	20	24	30				6	8	10	12	16	20				27	15	-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1498								10	12	16	20	24	30					8	10	12	16	20	24			30	15	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	40~1498									12	16	20	24	30						10	12	16	20	24	30		36	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	50~1498										16	20	24	30							12	16	20	24	30		41	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Part Number		1mm Increments			P (Coarse) Selection											N (Coarse) Selection									Cross-Drilled Hole Dimensions		D Tol.		(Y)Max.	R	C
Type	D	L	F	B	P (Coarse) Selection											N (Coarse) Selection									H	d	g6	f8	(Y)Max.	R	C
(With Cross-Drilled Hole) (D Tol. g6) SFZH SSFZH PSFZH PSSFZH RSFZH (D Tol. f8) PSGZH [ ! ]8≤D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.	8	25~500	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 [ ! ]B≥Pitchx3	3	4	5	6	8							3	4	5							H=1mm Increment [ ! ]L≥H+d/2+6+Nx2.5 [ ! ]H≥d/2+2	3	-0.005 -0.014	-0.013 -0.035	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8	10						3	4	5	6							3	-0.005 -0.014	-0.013 -0.035	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10	12						4	5	6	8						3	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12						4	5	6	8						4	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12						4	5	6	8	10					4	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12	16					4	5	6	8	10					4	-0.006 -0.017	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16					4	5	6	8	10	12				6	-0.006 -0.017	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16	20				4	5	6	8	10	12				6	-0.007 -0.020	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24			4	5	6	8	10	12	16			7	-0.007 -0.020	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24	30				6	8	10	12	16	20		7	-0.007 -0.020	-0.020 -0.053	1500	0.3 or Less	1.0 or Less

Part Number		1mm Increments			P (Coarse) Selection											N (Coarse) Selection									Wrench Flats Dimensions			D Tol.	(Y)Max.	R	C
Type	D	L	F	B	P (Coarse) Selection											N (Coarse) Selection									SC	W	ℓ₁	g6	(Y)Max.	R	C
(With Wrench Flats) (D Tol. g6) Low Temp. Black Chrome Plating RSFAZ	6	25~500	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 [ ! ]B≥Pitchx3	3	4	5	6								3									SC = 1mm Increment [ ! ]SC+ℓ_1≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	5	8	-0.004 -0.012	600	0.3 or Less	0.5 or Less
	8	25~500			3	4	5	6	8							3	4	5								7	8	-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8	10						3	4	5	6							8	8	-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10	12						4	5	6	8						10	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12						4	5	6	8						11	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12						4	5	6	8	10					13	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12	16					4	5	6	8	10					14	10	-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16					4	5	6	8	10	12				16	10	-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16	20				4	5	6	8	10	12				17	10	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24			4	5	6	8	10	12	16			22	10	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24	30				6	8	10	12	16	20		27	15	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

[ ! ]Full length L requires Nx2.5+4≤L. [ ! ]When D=P, specify F=B as B dimensions. However, L and F dimensions have manufacturing priority and the B dimension of the product will be F-(Pitchx2).

Coarse Thread Dimensions
M	pitch
3	0.5
4	0.7
5	0.8
6	1.0
8	1.25
10	1.5
12	1.75
16	2.0
20	2.5
24	3.0
30	3.5

Alterations

Linear Shafts-Both Ends Threaded:Related Image

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

1
2
3
4
5
Next >>

Part Number
PSFAZ6-[25-598/1]-F[2-30/1]-B[0-28/1]-P[3,4,5,6]-N3-SC[0-590/1]
PSFAZ6-[25-598/1]-F[2-30/1]-B[0-28/1]-PMC[3,4,5,6]-N3-SC[0-590/1]
PSFAZ8-[25-798/1]-F[2-40/1]-B[0-38/1]-P[3,4,5,6,8]-N[3,4,5]-SC[0-790/1]
PSFAZ8-[25-798/1]-F[2-40/1]-B[0-38/1]-PMC[3,4,5,6,8]-N[3,4,5]-SC[0-790/1]
PSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-P[4,5,6,8,10]-N[3,4,5,6]-SC[0-780/1]
PSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-P[4,5,6,8,10]-ND6-SC[0-780/1]
PSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-PMC[4,5,6,8,10]-N[3,4,5,6]-SC[0-780/1]
PSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-PMC[4,5,6,8,10]-ND6-SC[0-780/1]
PSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-PMS10-N[3,4,5,6]-SC[0-780/1]
PSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-PMS10-ND6-SC[0-780/1]
PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-N[4,5,6,8]-SC[0-988/1]
PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-ND[6,8]-SC[0-988/1]
PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-NSC8-SC[0-988/1]
PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-N[4,5,6,8]-SC[0-988/1]
PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-ND[6,8]-SC[0-988/1]
PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-NSC8-SC[0-988/1]
PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-N[4,5,6,8]-SC[0-988/1]
PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-ND[6,8]-SC[0-988/1]
PSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-NSC8-SC[0-988/1]
PSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-N[4,5,6,8]-SC[0-988/1]
PSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-ND[6,8]-SC[0-988/1]
PSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-NSC8-SC[0-988/1]
PSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-N[4,5,6,8]-SC[0-988/1]
PSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-ND[6,8]-SC[0-988/1]
PSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-NSC8-SC[0-988/1]
PSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS10-N[4,5,6,8]-SC[0-988/1]
PSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS10-ND[6,8]-SC[0-988/1]
PSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS10-NSC8-SC[0-988/1]
PSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-N[4,5,6,8,10]-SC[0-988/1]
PSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-ND[6,8,10]-SC[0-988/1]
PSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-NSC[8,10]-SC[0-988/1]
PSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12,15]-N[4,5,6,8,10]-SC[0-988/1]
PSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12,15]-ND[6,8,10]-SC[0-988/1]
PSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12,15]-NSC[8,10]-SC[0-988/1]
PSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-N[4,5,6,8,10]-SC[0-988/1]
PSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-ND[6,8,10]-SC[0-988/1]
PSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-NSC[8,10]-SC[0-988/1]
PSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-N[4,5,6,8,10]-SC[0-1188/1]
PSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-ND[6,8,10]-SC[0-1188/1]
PSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-NSC[8,10]-SC[0-1188/1]
PSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15]-N[4,5,6,8,10]-SC[0-1188/1]
PSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15]-ND[6,8,10]-SC[0-1188/1]
PSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15]-NSC[8,10]-SC[0-1188/1]
PSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14,16]-N[4,5,6,8,10]-SC[0-1188/1]
PSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14,16]-ND[6,8,10]-SC[0-1188/1]
PSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14,16]-NSC[8,10]-SC[0-1188/1]
PSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-N[4,5,6,8,10,12]-SC[0-1188/1]
PSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-ND[6,8,10,12]-SC[0-1188/1]
PSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-NSC[8,10,12]-SC[0-1188/1]
PSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15,17]-N[4,5,6,8,10,12]-SC[0-1188/1]
PSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15,17]-ND[6,8,10,12]-SC[0-1188/1]
PSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15,17]-NSC[8,10,12]-SC[0-1188/1]
PSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14,18]-N[4,5,6,8,10,12]-SC[0-1188/1]
PSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14,18]-ND[6,8,10,12]-SC[0-1188/1]
PSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14,18]-NSC[8,10,12]-SC[0-1188/1]
PSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-P[6,8,10,12,16,20]-N[4,5,6,8,10,12]-SC[0-1188/1]
PSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-P[6,8,10,12,16,20]-ND[6,8,10,12]-SC[0-1188/1]
PSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-P[6,8,10,12,16,20]-NSC[8,10,12,14]-SC[0-1188/1]
PSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-PMC[6,8,10,12,15,17,20]-N[4,5,6,8,10,12]-SC[0-1188/1]
PSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-PMC[6,8,10,12,15,17,20]-ND[6,8,10,12]-SC[0-1188/1]
PSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-PMC[6,8,10,12,15,17,20]-NSC[8,10,12,14]-SC[0-1188/1]
PSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-PMS[10,12,14,18]-N[4,5,6,8,10,12]-SC[0-1188/1]
PSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-PMS[10,12,14,18]-ND[6,8,10,12]-SC[0-1188/1]
PSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-PMS[10,12,14,18]-NSC[8,10,12,14]-SC[0-1188/1]
PSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-P[8,10,12,16,20,24]-N[4,5,6,8,10,12,16]-SC[0-1188/1]
PSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-P[8,10,12,16,20,24]-ND[6,8,10,12,16]-SC[0-1188/1]
PSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-P[8,10,12,16,20,24]-NSC[8,10,12,14,18]-SC[0-1188/1]
PSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-PMC[8,10,12,15,17,20,25]-N[4,5,6,8,10,12,16]-SC[0-1188/1]
PSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-PMC[8,10,12,15,17,20,25]-ND[6,8,10,12,16]-SC[0-1188/1]
PSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-PMC[8,10,12,15,17,20,25]-NSC[8,10,12,14,18]-SC[0-1188/1]
PSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-PMS[10,12,14,18]-N[4,5,6,8,10,12,16]-SC[0-1188/1]
PSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-PMS[10,12,14,18]-ND[6,8,10,12,16]-SC[0-1188/1]
PSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-PMS[10,12,14,18]-NSC[8,10,12,14,18]-SC[0-1188/1]
PSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-P[8,10,12,16,20,24,30]-N[6,8,10,12,16,20]-SC[0-1483/1]
PSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-P[8,10,12,16,20,24,30]-ND[6,8,10,12,16,20]-SC[0-1483/1]
PSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-P[8,10,12,16,20,24,30]-NSC[8,10,12,14,18]-SC[0-1483/1]
PSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-PMC[8,10,12,15,17,20,25,30]-N[6,8,10,12,16,20]-SC[0-1483/1]
PSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-PMC[8,10,12,15,17,20,25,30]-ND[6,8,10,12,16,20]-SC[0-1483/1]
PSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-PMC[8,10,12,15,17,20,25,30]-NSC[8,10,12,14,18]-SC[0-1483/1]
PSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-PMS[10,12,14,18]-N[6,8,10,12,16,20]-SC[0-1483/1]
PSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-PMS[10,12,14,18]-ND[6,8,10,12,16,20]-SC[0-1483/1]
PSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-PMS[10,12,14,18]-NSC[8,10,12,14,18]-SC[0-1483/1]
PSFAZ35-[25-1498/1]-F[2-150/1]-B[0-145/1]-P[10,12,16,20,24,30]-N[8,10,12,16,20,24]-SC[0-1483/1]
PSFAZ35-[25-1498/1]-F[2-150/1]-B[0-145/1]-P[10,12,16,20,24,30]-NSC[8,10,12,14,18]-SC[0-1483/1]
PSFAZ35-[25-1498/1]-F[2-150/1]-B[0-145/1]-PMC[10,12,15,17,20,25,30]-N[8,10,12,16,20,24]-SC[0-1483/1]
PSFAZ35-[25-1498/1]-F[2-150/1]-B[0-145/1]-PMC[10,12,15,17,20,25,30]-NSC[8,10,12,14,18]-SC[0-1483/1]
PSFAZ35-[25-1498/1]-F[2-150/1]-B[0-145/1]-PMS[10,12,14,18]-N[8,10,12,16,20,24]-SC[0-1483/1]
PSFAZ35-[25-1498/1]-F[2-150/1]-B[0-145/1]-PMS[10,12,14,18]-NSC[8,10,12,14,18]-SC[0-1483/1]
PSFAZ40-[40-1498/1]-F[2-150/1]-B[0-145/1]-P[12,16,20,24,30]-N[10,12,16,20,24,30]-SC[0-1478/1]
PSFAZ40-[40-1498/1]-F[2-150/1]-B[0-145/1]-PMC[12,15,17,20,25,30]-N[10,12,16,20,24,30]-SC[0-1478/1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Add Wrench Flats at One Location [SC] (mm)	B (mm)	Change Tapped Thread N to Fine One [NSC] (mm)	F (mm)	Fine Thread [PMC] (mm)	Fine Thread [PMS] (mm)	H (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] (mm)	Threaded (Coarse) [P] (mm)
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	6	25 ～ 598	g6	Induction Hardened (58HRC~)	0 ～ 590	0 ～ 28	-	2 ～ 30	-	-	-	3	-	3 ～ 6
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	6	25 ～ 598	g6	Induction Hardened (58HRC~)	0 ～ 590	0 ～ 28	-	2 ～ 30	3 ～ 6	-	-	3	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 790	0 ～ 38	-	2 ～ 40	-	-	-	3 ～ 5	-	3 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 790	0 ～ 38	-	2 ～ 40	3 ～ 8	-	-	3 ～ 5	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 780	0 ～ 48	-	2 ～ 50	-	-	-	3 ～ 6	-	4 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 780	0 ～ 48	-	2 ～ 50	-	-	-	-	6	4 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 780	0 ～ 48	-	2 ～ 50	4 ～ 10	-	-	3 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 780	0 ～ 48	-	2 ～ 50	4 ～ 10	-	-	-	6	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 780	0 ～ 48	-	2 ～ 50	-	10	-	3 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 780	0 ～ 48	-	2 ～ 50	-	10	-	-	6	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	-	-	-	4 ～ 8	-	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	-	-	-	-	6 ～ 8	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	8	2 ～ 60	-	-	-	-	-	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	5 ～ 12	-	-	4 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	5 ～ 12	-	-	-	6 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	8	2 ～ 60	5 ～ 12	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	-	10 ～ 12	-	4 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	-	10 ～ 12	-	-	6 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	8	2 ～ 60	-	10 ～ 12	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	-	-	-	4 ～ 8	-	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	-	-	-	-	6 ～ 8	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	8	2 ～ 60	-	-	-	-	-	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	5 ～ 12	-	-	4 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	5 ～ 12	-	-	-	6 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	8	2 ～ 60	5 ～ 12	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	-	10	-	4 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	-	10	-	-	6 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	8	2 ～ 60	-	10	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	-	-	-	4 ～ 10	-	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	-	-	-	-	6 ～ 10	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	8 ～ 10	2 ～ 60	-	-	-	-	-	5 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	5 ～ 15	-	-	4 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	5 ～ 15	-	-	-	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	8 ～ 10	2 ～ 60	5 ～ 15	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	-	10 ～ 12	-	4 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	-	2 ～ 60	-	10 ～ 12	-	-	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	0 ～ 58	8 ～ 10	2 ～ 60	-	10 ～ 12	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	-	2 ～ 80	-	-	-	4 ～ 10	-	5 ～ 16
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	-	2 ～ 80	-	-	-	-	6 ～ 10	5 ～ 16
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	8 ～ 10	2 ～ 80	-	-	-	-	-	5 ～ 16
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	-	2 ～ 80	5 ～ 15	-	-	4 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	-	2 ～ 80	5 ～ 15	-	-	-	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	8 ～ 10	2 ～ 80	5 ～ 15	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	-	2 ～ 80	-	10 ～ 16	-	4 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	-	2 ～ 80	-	10 ～ 16	-	-	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	8 ～ 10	2 ～ 80	-	10 ～ 16	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	-	2 ～ 80	-	-	-	4 ～ 12	-	5 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	-	2 ～ 80	-	-	-	-	6 ～ 12	5 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	8 ～ 12	2 ～ 80	-	-	-	-	-	5 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	-	2 ～ 80	5 ～ 17	-	-	4 ～ 12	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	-	2 ～ 80	5 ～ 17	-	-	-	6 ～ 12	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	8 ～ 12	2 ～ 80	5 ～ 17	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	-	2 ～ 80	-	10 ～ 18	-	4 ～ 12	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	-	2 ～ 80	-	10 ～ 18	-	-	6 ～ 12	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 78	8 ～ 12	2 ～ 80	-	10 ～ 18	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 98	-	2 ～ 100	-	-	-	4 ～ 12	-	6 ～ 20
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 98	-	2 ～ 100	-	-	-	-	6 ～ 12	6 ～ 20
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 98	8 ～ 14	2 ～ 100	-	-	-	-	-	6 ～ 20
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 98	-	2 ～ 100	6 ～ 20	-	-	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 98	-	2 ～ 100	6 ～ 20	-	-	-	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 98	8 ～ 14	2 ～ 100	6 ～ 20	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 98	-	2 ～ 100	-	10 ～ 18	-	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 98	-	2 ～ 100	-	10 ～ 18	-	-	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 98	8 ～ 14	2 ～ 100	-	10 ～ 18	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 117	-	2 ～ 120	-	-	-	4 ～ 16	-	8 ～ 24
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 117	-	2 ～ 120	-	-	-	-	6 ～ 16	8 ～ 24
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 117	8 ～ 18	2 ～ 120	-	-	-	-	-	8 ～ 24
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 117	-	2 ～ 120	8 ～ 25	-	-	4 ～ 16	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 117	-	2 ～ 120	8 ～ 25	-	-	-	6 ～ 16	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 117	8 ～ 18	2 ～ 120	8 ～ 25	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 117	-	2 ～ 120	-	10 ～ 18	-	4 ～ 16	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 117	-	2 ～ 120	-	10 ～ 18	-	-	6 ～ 16	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	0 ～ 117	8 ～ 18	2 ～ 120	-	10 ～ 18	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 147	-	2 ～ 150	-	-	-	6 ～ 20	-	8 ～ 30
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 147	-	2 ～ 150	-	-	-	-	6 ～ 20	8 ～ 30
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 147	8 ～ 18	2 ～ 150	-	-	-	-	-	8 ～ 30
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 147	-	2 ～ 150	8 ～ 30	-	-	6 ～ 20	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 147	-	2 ～ 150	8 ～ 30	-	-	-	6 ～ 20	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 147	8 ～ 18	2 ～ 150	8 ～ 30	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 147	-	2 ～ 150	-	10 ～ 18	-	6 ～ 20	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 147	-	2 ～ 150	-	10 ～ 18	-	-	6 ～ 20	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 147	8 ～ 18	2 ～ 150	-	10 ～ 18	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	35	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 145	-	2 ～ 150	-	-	-	8 ～ 24	-	10 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	35	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 145	8 ～ 18	2 ～ 150	-	-	-	-	-	10 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	35	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 145	-	2 ～ 150	10 ～ 30	-	-	8 ～ 24	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	35	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 145	8 ～ 18	2 ～ 150	10 ～ 30	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	35	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 145	-	2 ～ 150	-	10 ～ 18	-	8 ～ 24	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	35	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	0 ～ 145	8 ～ 18	2 ～ 150	-	10 ～ 18	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	40	40 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1478	0 ～ 145	-	2 ～ 150	-	-	-	10 ～ 30	-	12 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	40	40 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1478	0 ～ 145	-	2 ～ 150	12 ～ 30	-	-	10 ～ 30	-	-

1
2
3
4
5
Next >>

Example

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	Tapped
Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?

Configure

Specification/Dimensions

Material

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Hardness

Add Wrench Flats at One Location [SC](mm)

B(mm)

Change Tapped Thread N to Fine One [NSC](mm)

F(mm)

Fine Thread [PMC](mm)

Fine Thread [PMS](mm)

H(mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)

Threaded (Coarse) [P](mm)

type

Shaft Fit Tolerance

CAD

Days to Ship

Specify Alterations

Linear Shafts-One Ends Threaded (Part Number)

Copy Part Number URL to Clipboard

Product Description

Specifications

Alterations

Part Number

Example

Basic Information

Payment Method

Customer Service

My Account

About MISUMI

Related Sites

Social Media

MISUMI India Contact

Customer Service

日本語でのお問い合わせはジャパンデスクまで