Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1,118 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

PSFAD4-[25-298/1]-F[2-28/1]-B[0-28/1]-P[3,4]-N2

Material Heat Treatment Surface Treatment Shaft Dia. D Length L Shaft Fit Tolerance Hardness B Change Tapped Thread N to Fine One [NSC] F Fine Thread [PMC] Fine Thread [PMS] P Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] type CAD Days to Ship

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
4

5

6

8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1498/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
B(mm)
[0-210/1mm Unit(s)]
Clear
Change Tapped Thread N to Fine One [NSC](mm)
8

10

12

14

18
Clear
F(mm)
[2-210/1mm Unit(s)]
Clear
Fine Thread [PMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
Fine Thread [PMS](mm)
10

12

14

18
Clear
P(mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)
2

2.6

3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)
6

8

10

12

16

20
Clear
type
- PSFAD
- PSFGD
- PSFUD
- PSSFAD
- PSSFGD
- PSSFUD
- RSFAD
- SFAD
- SFUD
- SSFAD
- SSFUD
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

8 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Linear Shafts-One End Threaded One End Tapped

Name: Linear Shafts-One End Threaded One End Tapped
Brand: MISUMI
Availability: PreOrder

Brand :

MISUMI

Part Number :

PSFAD4-[25-298/1]-F[2-28/1]-B[0-28/1]-P[3,4]-N2

PSFAD4-[25-298/1]-F[2-28/1]-B[0-28/1]-PMC[3,4]-N2

PSFAD5-[25-398/1]-F[2-35/1]-B[0-35/1]-P[3,4,5]-N[2.6,3]

PSFAD5-[25-398/1]-F[2-35/1]-B[0-35/1]-PMC[3,4,5]-N[2.6,3]

PSFAD6-[25-598/1]-F[2-42/1]-B[0-40/1]-P[3,4,5,6]-N3

PSFAD6-[25-598/1]-F[2-42/1]-B[0-40/1]-PMC[3,4,5,6]-N3

PSFAD8-[25-798/1]-F[2-56/1]-B[0-53/1]-P[3,4,5,6,8]-N[3,4,5]

PSFAD8-[25-798/1]-F[2-56/1]-B[0-53/1]-PMC[3,4,5,6,8]-N[3,4,5]

PSFAD10-[25-798/1]-F[2-70/1]-B[0-70/1]-P[4,5,6,8,10]-N[3,4,5,6]

PSFAD10-[25-798/1]-F[2-70/1]-B[0-70/1]-P[4,5,6,8,10]-ND6

PSFAD10-[25-798/1]-F[2-70/1]-B[0-70/1]-PMC[4,5,6,8,10]-N[3,4,5,6]

PSFAD10-[25-798/1]-F[2-70/1]-B[0-70/1]-PMC[4,5,6,8,10]-ND6

PSFAD10-[25-798/1]-F[2-70/1]-B[0-70/1]-PMS10-N[3,4,5,6]

PSFAD10-[25-798/1]-F[2-70/1]-B[0-70/1]-PMS10-ND6

PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-P[5,6,8,10,12]-N[4,5,6,8]

PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-P[5,6,8,10,12]-ND[6,8]

PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-P[5,6,8,10,12]-NSC8

PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMC[5,6,8,10,12]-N[4,5,6,8]

PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMC[5,6,8,10,12]-ND[6,8]

PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMC[5,6,8,10,12]-NSC8

PSFAD4-[25-298/1]-F[2-28/1]-B[0-28/1]-P[3,4]-N2

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features]A shaft (linear shaft, hardened shaft, guide shaft, slide shaft) with one end male thread and one end female thread. L size standard expanded! You can now purchase from an even more complete lineup.

Linear Shafts-One End Threaded One End Tapped:Related Image

Type			[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
D Tol. g6	D Tol. h5	D Tol. f8	[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
SFAD	SFUD	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSFAD	SSFUD	-	SUS440C or 13Cr stainless		-
PSFAD	PSFUD	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFAD	PSSFUD	-	SUS440C or 13Cr stainless
RSFAD	-	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGD	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSFGD	SUS304	-

[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	F	-	B	-	P	-	N
SFAD20	-	277	-	F25	-	B12	-	P10	-	N12

[ ! ]Full length L requires Nx2.5+4≤L.
[ ! ]When D=P, specify F=B as B dimensions. However, L and F dimensions have manufacturing priority and the B dimension of the product will be F-(Pitchx2).

Part Number			1mm Increments			P (Coarse) Selection											N (Coarse) Selection													D Tol.			(Y)Max.	R	C
Type		D	L	F	B	P (Coarse) Selection											N (Coarse) Selection													g6	h5	f8	(Y)Max.	R	C
(D Tol. g6) SFAD SSFAD PSFAD PSSFAD (D Tol. f8) PSFGD PSSFGD	(D Tol. h5) SFUD SSFUD PSFUD PSSFUD	4	25~298	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 [ ! ]B≥Pitchx3	3	4										2													-0.004 -0.012	0 -0.005	-	300	0.2 or Less	0.2 or Less
		5	25~398			3	4	5										2.6	3											-0.004 -0.012	0 -0.005	-	400	0.2 or Less	0.2 or Less
		6	25~798			3	4	5	6										3											-0.004 -0.012	0 -0.005	-0.010 -0.028	600	0.3 or Less	0.5 or Less
		8	25~998			3	4	5	6	8									3	4	5									-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~998				4	5	6	8	10								3	4	5	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~1198					5	6	8	10	12								4	5	6	8							-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~1198					5	6	8	10	12								4	5	6	8							-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~1198					5	6	8	10	12								4	5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1198					5	6	8	10	12	16							4	5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1198					5	6	8	10	12	16							4	5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1198						6	8	10	12	16	20						4	5	6	8	10	12					-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1198							8	10	12	16	20	24					4	5	6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1498							8	10	12	16	20	24	30						6	8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1498								10	12	16	20	24	30							8	10	12	16	20	24		-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	40~1498									12	16	20	24	30								10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	50~1498										16	20	24	30									12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Part Number		1mm Increments			P (Coarse) Selection											M (Coarse) Selection											D Tol.	(Y)Max.	R	C
Type	D	L	F	B	P (Coarse) Selection											M (Coarse) Selection											g6	(Y)Max.	R	C
(D Tol. g6) Low Temp. Black Chrome Plating RSFAD	4	25~298	2≤F≤Px5	(When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 [ ! ]B≥Pitchx3	3	4										2											-0.004 -0.012	300	0.2 or Less	0.2 or Less
	5	25~398			3	4	5										2.6	3									-0.004 -0.012	400	0.2 or Less	0.2 or Less
	6	25~500			3	4	5	6										3									-0.004 -0.012	600	0.3 or Less	0.5 or Less
	8	25~500			3	4	5	6	8									3	4	5							-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8	10								3	4	5	6						-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10	12								4	5	6	8					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12								4	5	6	8					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12								4	5	6	8	10				-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12	16							4	5	6	8	10				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16							4	5	6	8	10	12			-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16	20						4	5	6	8	10	12			-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24					4	5	6	8	10	12	16		-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24	30						6	8	10	12	16	20	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

Coarse Thread Dimensions
M	Pitch
3	0.5
4	0.7
5	0.8
6	1.0
8	1.25
10	1.5
12	1.75
16	2.0
20	2.5
24	3.0
30	3.5

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
PSFAD4-[25-298/1]-F[2-28/1]-B[0-28/1]-P[3,4]-N2
PSFAD4-[25-298/1]-F[2-28/1]-B[0-28/1]-PMC[3,4]-N2
PSFAD5-[25-398/1]-F[2-35/1]-B[0-35/1]-P[3,4,5]-N[2.6,3]
PSFAD5-[25-398/1]-F[2-35/1]-B[0-35/1]-PMC[3,4,5]-N[2.6,3]
PSFAD6-[25-598/1]-F[2-42/1]-B[0-40/1]-P[3,4,5,6]-N3
PSFAD6-[25-598/1]-F[2-42/1]-B[0-40/1]-PMC[3,4,5,6]-N3
PSFAD8-[25-798/1]-F[2-56/1]-B[0-53/1]-P[3,4,5,6,8]-N[3,4,5]
PSFAD8-[25-798/1]-F[2-56/1]-B[0-53/1]-PMC[3,4,5,6,8]-N[3,4,5]
PSFAD10-[25-798/1]-F[2-70/1]-B[0-70/1]-P[4,5,6,8,10]-N[3,4,5,6]
PSFAD10-[25-798/1]-F[2-70/1]-B[0-70/1]-P[4,5,6,8,10]-ND6
PSFAD10-[25-798/1]-F[2-70/1]-B[0-70/1]-PMC[4,5,6,8,10]-N[3,4,5,6]
PSFAD10-[25-798/1]-F[2-70/1]-B[0-70/1]-PMC[4,5,6,8,10]-ND6
PSFAD10-[25-798/1]-F[2-70/1]-B[0-70/1]-PMS10-N[3,4,5,6]
PSFAD10-[25-798/1]-F[2-70/1]-B[0-70/1]-PMS10-ND6
PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-P[5,6,8,10,12]-N[4,5,6,8]
PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-P[5,6,8,10,12]-ND[6,8]
PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-P[5,6,8,10,12]-NSC8
PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMC[5,6,8,10,12]-N[4,5,6,8]
PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMC[5,6,8,10,12]-ND[6,8]
PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMC[5,6,8,10,12]-NSC8
PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMS[10,12]-N[4,5,6,8]
PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMS[10,12]-ND[6,8]
PSFAD12-[25-998/1]-F[2-84/1]-B[0-84/1]-PMS[10,12]-NSC8
PSFAD13-[25-998/1]-F[2-84/1]-B[0-79/1]-P[5,6,8,10,12]-N[4,5,6,8]
PSFAD13-[25-998/1]-F[2-84/1]-B[0-79/1]-P[5,6,8,10,12]-ND[6,8]
PSFAD13-[25-998/1]-F[2-84/1]-B[0-79/1]-P[5,6,8,10,12]-NSC8
PSFAD13-[25-998/1]-F[2-84/1]-B[0-79/1]-PMC[5,6,8,10,12]-N[4,5,6,8]
PSFAD13-[25-998/1]-F[2-84/1]-B[0-79/1]-PMC[5,6,8,10,12]-ND[6,8]
PSFAD13-[25-998/1]-F[2-84/1]-B[0-79/1]-PMC[5,6,8,10,12]-NSC8
PSFAD13-[25-998/1]-F[2-84/1]-B[0-79/1]-PMS[10,12]-N[4,5,6,8]
PSFAD13-[25-998/1]-F[2-84/1]-B[0-79/1]-PMS[10,12]-ND[6,8]
PSFAD13-[25-998/1]-F[2-84/1]-B[0-79/1]-PMS[10,12]-NSC8
PSFAD15-[25-998/1]-F[2-84/1]-B[0-79/1]-P[5,6,8,10,12]-N[4,5,6,8,10]
PSFAD15-[25-998/1]-F[2-84/1]-B[0-79/1]-P[5,6,8,10,12]-ND[6,8,10]
PSFAD15-[25-998/1]-F[2-84/1]-B[0-79/1]-P[5,6,8,10,12]-NSC[8,10]
PSFAD15-[25-998/1]-F[2-84/1]-B[0-79/1]-PMC[5,6,8,10,12,15]-N[4,5,6,8,10]
PSFAD15-[25-998/1]-F[2-84/1]-B[0-79/1]-PMC[5,6,8,10,12,15]-ND[6,8,10]
PSFAD15-[25-998/1]-F[2-84/1]-B[0-79/1]-PMC[5,6,8,10,12,15]-NSC[8,10]
PSFAD15-[25-998/1]-F[2-84/1]-B[0-79/1]-PMS[10,12,14]-N[4,5,6,8,10]
PSFAD15-[25-998/1]-F[2-84/1]-B[0-79/1]-PMS[10,12,14]-ND[6,8,10]
PSFAD15-[25-998/1]-F[2-84/1]-B[0-79/1]-PMS[10,12,14]-NSC[8,10]
PSFAD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,6,8,10,12,16]-N[4,5,6,8,10]
PSFAD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,6,8,10,12,16]-ND[6,8,10]
PSFAD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,6,8,10,12,16]-NSC[8,10]
PSFAD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,6,8,10,12,15]-N[4,5,6,8,10]
PSFAD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,6,8,10,12,15]-ND[6,8,10]
PSFAD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,6,8,10,12,15]-NSC[8,10]
PSFAD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,12,14]-N[4,5,6,8,10]
PSFAD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,12,14]-ND[6,8,10]
PSFAD16-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,12,14]-NSC[8,10]
PSFAD18-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,6,8,10,12,16]-N[4,5,6,8,10,12]
PSFAD18-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,6,8,10,12,16]-ND[6,8,10,12]
PSFAD18-[25-1198/1]-F[2-112/1]-B[0-107/1]-P[5,6,8,10,12,16]-NSC[8,10,12]
PSFAD18-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,6,8,10,12,15,17]-N[4,5,6,8,10,12]
PSFAD18-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,6,8,10,12,15,17]-ND[6,8,10,12]
PSFAD18-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMC[5,6,8,10,12,15,17]-NSC[8,10,12]
PSFAD18-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,12,14,18]-N[4,5,6,8,10,12]
PSFAD18-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,12,14,18]-ND[6,8,10,12]
PSFAD18-[25-1198/1]-F[2-112/1]-B[0-107/1]-PMS[10,12,14,18]-NSC[8,10,12]
PSFAD20-[25-1198/1]-F[2-140/1]-B[0-135/1]-P[6,8,10,12,16,20]-N[4,5,6,8,10,12]

Price	Minimum Order Qty.	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	B (mm)	Change Tapped Thread N to Fine One [NSC] (mm)	F (mm)	Fine Thread [PMC] (mm)	Fine Thread [PMS] (mm)	P (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] (mm)
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	4	25 ～ 298	g6	Induction Hardened (58HRC~)	0 ～ 28	-	2 ～ 28	-	-	3 ～ 4	2	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	4	25 ～ 298	g6	Induction Hardened (58HRC~)	0 ～ 28	-	2 ～ 28	3 ～ 4	-	-	2	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	5	25 ～ 398	g6	Induction Hardened (58HRC~)	0 ～ 35	-	2 ～ 35	-	-	3 ～ 5	2.6 ～ 3	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	5	25 ～ 398	g6	Induction Hardened (58HRC~)	0 ～ 35	-	2 ～ 35	3 ～ 5	-	-	2.6 ～ 3	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	6	25 ～ 598	g6	Induction Hardened (58HRC~)	0 ～ 40	-	2 ～ 42	-	-	3 ～ 6	3	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	6	25 ～ 598	g6	Induction Hardened (58HRC~)	0 ～ 40	-	2 ～ 42	3 ～ 6	-	-	3	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 53	-	2 ～ 56	-	-	3 ～ 8	3 ～ 5	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 53	-	2 ～ 56	3 ～ 8	-	-	3 ～ 5	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 70	-	2 ～ 70	-	-	4 ～ 10	3 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 70	-	2 ～ 70	-	-	4 ～ 10	-	6
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 70	-	2 ～ 70	4 ～ 10	-	-	3 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 70	-	2 ～ 70	4 ～ 10	-	-	-	6
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 70	-	2 ～ 70	-	10	-	3 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 70	-	2 ～ 70	-	10	-	-	6
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 84	-	2 ～ 84	-	-	5 ～ 12	4 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 84	-	2 ～ 84	-	-	5 ～ 12	-	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 84	8	2 ～ 84	-	-	5 ～ 12	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 84	-	2 ～ 84	5 ～ 12	-	-	4 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 84	-	2 ～ 84	5 ～ 12	-	-	-	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 84	8	2 ～ 84	5 ～ 12	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 84	-	2 ～ 84	-	10 ～ 12	-	4 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 84	-	2 ～ 84	-	10 ～ 12	-	-	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 84	8	2 ～ 84	-	10 ～ 12	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	-	2 ～ 84	-	-	5 ～ 12	4 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	-	2 ～ 84	-	-	5 ～ 12	-	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	8	2 ～ 84	-	-	5 ～ 12	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	-	2 ～ 84	5 ～ 12	-	-	4 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	-	2 ～ 84	5 ～ 12	-	-	-	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	8	2 ～ 84	5 ～ 12	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	-	2 ～ 84	-	10 ～ 12	-	4 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	-	2 ～ 84	-	10 ～ 12	-	-	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	8	2 ～ 84	-	10 ～ 12	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	-	2 ～ 84	-	-	5 ～ 12	4 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	-	2 ～ 84	-	-	5 ～ 12	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	8 ～ 10	2 ～ 84	-	-	5 ～ 12	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	-	2 ～ 84	5 ～ 15	-	-	4 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	-	2 ～ 84	5 ～ 15	-	-	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	8 ～ 10	2 ～ 84	5 ～ 15	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	-	2 ～ 84	-	10 ～ 14	-	4 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	-	2 ～ 84	-	10 ～ 14	-	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 79	8 ～ 10	2 ～ 84	-	10 ～ 14	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	-	2 ～ 112	-	-	5 ～ 16	4 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	-	2 ～ 112	-	-	5 ～ 16	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	8 ～ 10	2 ～ 112	-	-	5 ～ 16	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	-	2 ～ 112	5 ～ 15	-	-	4 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	-	2 ～ 112	5 ～ 15	-	-	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	8 ～ 10	2 ～ 112	5 ～ 15	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	-	2 ～ 112	-	10 ～ 14	-	4 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	-	2 ～ 112	-	10 ～ 14	-	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	8 ～ 10	2 ～ 112	-	10 ～ 14	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	-	2 ～ 112	-	-	5 ～ 16	4 ～ 12	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	-	2 ～ 112	-	-	5 ～ 16	-	6 ～ 12
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	8 ～ 12	2 ～ 112	-	-	5 ～ 16	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	-	2 ～ 112	5 ～ 17	-	-	4 ～ 12	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	-	2 ～ 112	5 ～ 17	-	-	-	6 ～ 12
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	8 ～ 12	2 ～ 112	5 ～ 17	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	-	2 ～ 112	-	10 ～ 18	-	4 ～ 12	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	-	2 ～ 112	-	10 ～ 18	-	-	6 ～ 12
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 107	8 ～ 12	2 ～ 112	-	10 ～ 18	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 135	-	2 ～ 140	-	-	6 ～ 20	4 ～ 12	-

1
2
3
4
5
Next >>

Example

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	Tapped
Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?