Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(823 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

PSFHZ8-[20-500/1]-M[3,4,5]-N[3,4,5]-H[0-496/1]

Material Heat Treatment Surface Treatment Shaft Dia. D Length L Hardness Add Wrench Flats at One Location [SC] Change Tapped Thread M to Fine One [MSC] Change Tapped Thread N to Fine One [NSC] H Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] type Shaft Fit Tolerance CAD Days to Ship

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
6

8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[20-1500/1mm Unit(s)]
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Add Wrench Flats at One Location [SC](mm)
[0-1485/1mm Unit(s)]
Clear
Change Tapped Thread M to Fine One [MSC](mm)
8

10

12

14

18
Clear
Change Tapped Thread N to Fine One [NSC](mm)
8

10

12

14

18
Clear
H(mm)
[0-496/1mm Unit(s)]
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)
6

8

10

12

16

20
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)
6

8

10

12

16

20
Clear
type
- PSFGZ
- PSFHZ
- PSFJZ
- PSFUZ
- PSGHZ
- PSSFGZ
- PSSFHZ
- PSSFJZ
- PSSFUZ
- RSFHZ
- RSFJZ
- SFHZ
- SFJZ
- SFUZ
- SSFHZ
- SSFJZ
- SSFUZ
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

7 Day(s) or Less

8 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Linear Shafts-Both Ends Tapped with Wrench Flats / Both Ends Tapped with Cross-Drilled Hole

Name: Linear Shafts-Both Ends Tapped with Wrench Flats / Both Ends Tapped with Cross-Drilled Hole
Brand: MISUMI
Availability: PreOrder

Brand :

MISUMI

Part Number :

PSFHZ8-[20-500/1]-M[3,4,5]-N[3,4,5]-H[0-496/1]

PSFHZ10-[20-500/1]-M[3,4,5,6]-N[3,4,5,6]-H[0-496/1]

PSFHZ10-[20-500/1]-M[3,4,5,6]-ND6-H[0-496/1]

PSFHZ10-[20-500/1]-MD6-N[3,4,5,6]-H[0-496/1]

PSFHZ10-[20-500/1]-MD6-ND6-H[0-496/1]

PSFHZ12-[20-500/1]-M[4,5,6,8]-N[4,5,6,8]-H[0-496/1]

PSFHZ12-[20-500/1]-M[4,5,6,8]-ND[6,8]-H[0-496/1]

PSFHZ12-[20-500/1]-M[4,5,6,8]-NSC8-H[0-496/1]

PSFHZ12-[20-500/1]-MD[6,8]-N[4,5,6,8]-H[0-496/1]

PSFHZ12-[20-500/1]-MD[6,8]-ND[6,8]-H[0-496/1]

PSFHZ12-[20-500/1]-MD[6,8]-NSC8-H[0-496/1]

PSFHZ12-[20-500/1]-MSC8-N[4,5,6,8]-H[0-496/1]

PSFHZ12-[20-500/1]-MSC8-ND[6,8]-H[0-496/1]

PSFHZ12-[20-500/1]-MSC8-NSC8-H[0-496/1]

PSFHZ13-[25-500/1]-M[4,5,6,8]-N[4,5,6,8]-H[0-496/1]

PSFHZ13-[25-500/1]-M[4,5,6,8]-ND[6,8]-H[0-496/1]

PSFHZ13-[25-500/1]-M[4,5,6,8]-NSC8-H[0-496/1]

PSFHZ13-[25-500/1]-MD[6,8]-N[4,5,6,8]-H[0-496/1]

PSFHZ13-[25-500/1]-MD[6,8]-ND[6,8]-H[0-496/1]

PSFHZ13-[25-500/1]-MD[6,8]-NSC8-H[0-496/1]

PSFHZ8-[20-500/1]-M[3,4,5]-N[3,4,5]-H[0-496/1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features] A shaft (linear shaft, hardened shaft, guide shaft, slide shaft) with female screw holes on both ends and a spanner groove. L size standard expanded! You can now purchase from an even more complete lineup.

Both Ends Tapped with Cross-Drilled Hole/Wrench Flats:Related Image

Type					[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
With Wrench Flats			With Cross-Drilled Hole
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. f8
SFJZ	SFUZ	-	SFHZ	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSFJZ	SSFUZ	-	SSFHZ	-	SUS440C or 13Cr stainless		-
PSFJZ	PSFUZ	-	PSFHZ	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFJZ	PSSFUZ	-	PSSFHZ	-	SUS440C or 13Cr stainless
RSFJZ	-	-	RSFHZ	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGZ	-	PSGHZ	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSFGZ	-	-	SUS304	-

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	M	-	N	-	SC	-	H
SFJZ10 SSFHZ20	- -	200 500	- -	M5 M6	- -	N5 N10	-	SC10	-	H20

Part Number			L 1mm Increments	M (Coarse), N (Coarse) Selection											Wrench Flats Dimensions			D Tol.			C
Type		D	L 1mm Increments	M (Coarse), N (Coarse) Selection											SC	W	ℓ₁	g6	h5	f8	C
(With Wrench Flats) (D Tol. g6) SFJZ SSFJZ PSFJZ PSSFJZ (D Tol. f8) PSFGZ PSSFGZ	(D Tol. h5) SFUZ SSFUZ PSFUZ PSSFUZ	6	20~ 800	3											SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]For Details of Wrench Flats, see >> P.142	5	8	-0.004 -0.012	0 -0.005	-0.010 -0.028	0.5 or Less
		8	20~1000	3	4	5										7	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	0.5 or Less
		10	20~1000	3	4	5	6									8	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	0.5 or Less
		12	20~1200		4	5	6	8								10	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		13	25~1200		4	5	6	8								11	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		15	25~1200		4	5	6	8	10							13	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		16	30~1200		4	5	6	8	10							14	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		18	30~1200		4	5	6	8	10	12						16	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		20	30~1200		4	5	6	8	10	12						17	10	-0.007 -0.020	0 -0.008	-0.020 -0.053	1.0 or Less
		25	35~1200		4	5	6	8	10	12	16					22	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		30	35~1500				6	8	10	12	16	20				27	15	-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		35	35~1500					8	10	12	16	20	24			30	15	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less
		40	50~1500						10	12	16	20	24	30		36	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less
		50	65~1500							12	16	20	24	30		41	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less

Part Number		L 1mm Increments	M (Coarse), N (Coarse) Selection									Wrench Flats Dimensions			D Tol.	C
Type	D	L 1mm Increments	M (Coarse), N (Coarse) Selection									SC	W	ℓ₁	g6	C
(With Wrench Flats) (D Tol. g6) Low Temp. Black Chrome Plating RSFJZ	6	20~500	3									SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]For Details of Wrench Flats, see >> P.142	5	8	-0.004 -0.012	0.5 or Less
	8	20~500	3	4	5								7	8	-0.005 -0.014	0.5 or Less
	10	20~500	3	4	5	6							8	8	-0.005 -0.014	0.5 or Less
	12	20~500		4	5	6	8						10	10	-0.006 -0.017	0.5 or Less
	13	25~500		4	5	6	8						11	10	-0.006 -0.017	0.5 or Less
	15	25~500		4	5	6	8	10					13	10	-0.006 -0.017	0.5 or Less
	16	30~500		4	5	6	8	10					14	10	-0.006 -0.017	0.5 or Less
	18	30~500		4	5	6	8	10	12				16	10	-0.006 -0.017	0.5 or Less
	20	30~500		4	5	6	8	10	12				17	10	-0.007 -0.020	1.0 or Less
	25	35~500		4	5	6	8	10	12	16			22	10	-0.007 -0.020	1.0 or Less
	30	35~500				6	8	10	12	16	20		27	15	-0.007 -0.020	1.0 or Less

Part Number		L 1mm Increments	M (Coarse), N (Coarse) Selection									Cross-Drilled Hole Dimensions		D Tol.		C
Type	D	L 1mm Increments	M (Coarse), N (Coarse) Selection									H	d	g6	f8	C
(With Cross-Drilled Hole) (D Tol. g6) SFHZ SSFHZ PSFHZ PSSFHZ RSFHZ (D Tol. f8) PSGHZ [ ! ]8≤D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.	8	20~500	3	4	5							H=1mm Increment [ ! ]L≥H+d/2+Nx2.5+6 [ ! ]H≥Mx2.5+d/2+6	3	-0.005 -0.014	-0.013 -0.035	0.5 or Less
	10	20~500	3	4	5	6							3	-0.005 -0.014	-0.013 -0.035	0.5 or Less
	12	20~500		4	5	6	8						3	-0.006 -0.017	-0.016 -0.043	0.5 or Less
	13	25~500		4	5	6	8						4	-0.006 -0.017	-0.016 -0.043	0.5 or Less
	15	25~500		4	5	6	8	10					4	-0.006 -0.017	-0.016 -0.043	0.5 or Less
	16	30~500		4	5	6	8	10					4	-0.006 -0.017	-0.016 -0.043	0.5 or Less
	18	30~500		4	5	6	8	10	12				6	-0.006 -0.017	-0.016 -0.043	0.5 or Less
	20	30~500		4	5	6	8	10	12				6	-0.007 -0.020	-0.020 -0.053	1.0 or Less
	25	35~500		4	5	6	8	10	12	16			7	-0.007 -0.020	-0.020 -0.053	1.0 or Less
	30	35~500				6	8	10	12	16	20		7	-0.007 -0.020	-0.020 -0.053	1.0 or Less

[ ! ]L requires Mx2+Nx2≤L. [ ! ]When Mx2.5+4+Nx2.5+4≥L, tap pilot holes may go through and the effective length of the smaller tap part may be shortened.

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
PSFHZ8-[20-500/1]-M[3,4,5]-N[3,4,5]-H[0-496/1]
PSFHZ10-[20-500/1]-M[3,4,5,6]-N[3,4,5,6]-H[0-496/1]
PSFHZ10-[20-500/1]-M[3,4,5,6]-ND6-H[0-496/1]
PSFHZ10-[20-500/1]-MD6-N[3,4,5,6]-H[0-496/1]
PSFHZ10-[20-500/1]-MD6-ND6-H[0-496/1]
PSFHZ12-[20-500/1]-M[4,5,6,8]-N[4,5,6,8]-H[0-496/1]
PSFHZ12-[20-500/1]-M[4,5,6,8]-ND[6,8]-H[0-496/1]
PSFHZ12-[20-500/1]-M[4,5,6,8]-NSC8-H[0-496/1]
PSFHZ12-[20-500/1]-MD[6,8]-N[4,5,6,8]-H[0-496/1]
PSFHZ12-[20-500/1]-MD[6,8]-ND[6,8]-H[0-496/1]
PSFHZ12-[20-500/1]-MD[6,8]-NSC8-H[0-496/1]
PSFHZ12-[20-500/1]-MSC8-N[4,5,6,8]-H[0-496/1]
PSFHZ12-[20-500/1]-MSC8-ND[6,8]-H[0-496/1]
PSFHZ12-[20-500/1]-MSC8-NSC8-H[0-496/1]
PSFHZ13-[25-500/1]-M[4,5,6,8]-N[4,5,6,8]-H[0-496/1]
PSFHZ13-[25-500/1]-M[4,5,6,8]-ND[6,8]-H[0-496/1]
PSFHZ13-[25-500/1]-M[4,5,6,8]-NSC8-H[0-496/1]
PSFHZ13-[25-500/1]-MD[6,8]-N[4,5,6,8]-H[0-496/1]
PSFHZ13-[25-500/1]-MD[6,8]-ND[6,8]-H[0-496/1]
PSFHZ13-[25-500/1]-MD[6,8]-NSC8-H[0-496/1]
PSFHZ13-[25-500/1]-MSC8-N[4,5,6,8]-H[0-496/1]
PSFHZ13-[25-500/1]-MSC8-ND[6,8]-H[0-496/1]
PSFHZ13-[25-500/1]-MSC8-NSC8-H[0-496/1]
PSFHZ15-[25-500/1]-M[4,5,6,8,10]-N[4,5,6,8,10]-H[0-496/1]
PSFHZ15-[25-500/1]-M[4,5,6,8,10]-ND[6,8,10]-H[0-496/1]
PSFHZ15-[25-500/1]-M[4,5,6,8,10]-NSC[8,10]-H[0-496/1]
PSFHZ15-[25-500/1]-MD[6,8,10]-N[4,5,6,8,10]-H[0-496/1]
PSFHZ15-[25-500/1]-MD[6,8,10]-ND[6,8,10]-H[0-496/1]
PSFHZ15-[25-500/1]-MD[6,8,10]-NSC[8,10]-H[0-496/1]
PSFHZ15-[25-500/1]-MSC[8,10]-N[4,5,6,8,10]-H[0-496/1]
PSFHZ15-[25-500/1]-MSC[8,10]-ND[6,8,10]-H[0-496/1]
PSFHZ15-[25-500/1]-MSC[8,10]-NSC[8,10]-H[0-496/1]
PSFHZ16-[30-500/1]-M[4,5,6,8,10]-N[4,5,6,8,10]-H[0-496/1]
PSFHZ16-[30-500/1]-M[4,5,6,8,10]-ND[6,8,10]-H[0-496/1]
PSFHZ16-[30-500/1]-M[4,5,6,8,10]-NSC[8,10]-H[0-496/1]
PSFHZ16-[30-500/1]-MD[6,8,10]-N[4,5,6,8,10]-H[0-496/1]
PSFHZ16-[30-500/1]-MD[6,8,10]-ND[6,8,10]-H[0-496/1]
PSFHZ16-[30-500/1]-MD[6,8,10]-NSC[8,10]-H[0-496/1]
PSFHZ16-[30-500/1]-MSC[8,10]-N[4,5,6,8,10]-H[0-496/1]
PSFHZ16-[30-500/1]-MSC[8,10]-ND[6,8,10]-H[0-496/1]
PSFHZ16-[30-500/1]-MSC[8,10]-NSC[8,10]-H[0-496/1]
PSFHZ18-[30-500/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]-H[0-495/1]
PSFHZ18-[30-500/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]-H[0-495/1]
PSFHZ18-[30-500/1]-M[4,5,6,8,10,12]-NSC[8,10,12]-H[0-495/1]
PSFHZ18-[30-500/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]-H[0-495/1]
PSFHZ18-[30-500/1]-MD[6,8,10,12]-ND[6,8,10,12]-H[0-495/1]
PSFHZ18-[30-500/1]-MD[6,8,10,12]-NSC[8,10,12]-H[0-495/1]
PSFHZ18-[30-500/1]-MSC[8,10,12]-N[4,5,6,8,10,12]-H[0-495/1]
PSFHZ18-[30-500/1]-MSC[8,10,12]-ND[6,8,10,12]-H[0-495/1]
PSFHZ18-[30-500/1]-MSC[8,10,12]-NSC[8,10,12]-H[0-495/1]
PSFHZ20-[30-500/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]-H[0-495/1]
PSFHZ20-[30-500/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]-H[0-495/1]
PSFHZ20-[30-500/1]-M[4,5,6,8,10,12]-NSC[8,10,12,14]-H[0-495/1]
PSFHZ20-[30-500/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]-H[0-495/1]
PSFHZ20-[30-500/1]-MD[6,8,10,12]-ND[6,8,10,12]-H[0-495/1]
PSFHZ20-[30-500/1]-MD[6,8,10,12]-NSC[8,10,12,14]-H[0-495/1]
PSFHZ20-[30-500/1]-MSC[8,10,12,14]-N[4,5,6,8,10,12]-H[0-495/1]
PSFHZ20-[30-500/1]-MSC[8,10,12,14]-ND[6,8,10,12]-H[0-495/1]
PSFHZ20-[30-500/1]-MSC[8,10,12,14]-NSC[8,10,12,14]-H[0-495/1]
PSFHZ25-[35-500/1]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16]-H[0-494/1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Add Wrench Flats at One Location [SC] (mm)	Change Tapped Thread M to Fine One [MSC] (mm)	Change Tapped Thread N to Fine One [NSC] (mm)	H (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] (mm)
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	20 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	3 ～ 5	3 ～ 5	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	20 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	3 ～ 6	3 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	20 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	3 ～ 6	-	-	6
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	20 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	-	3 ～ 6	6	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	20 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	-	-	6	6
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	20 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	4 ～ 8	4 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	20 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	4 ～ 8	-	-	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	20 ～ 500	g6	Induction Hardened (58HRC~)	-	-	8	0 ～ 496	4 ～ 8	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	20 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	-	4 ～ 8	6 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	20 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	-	-	6 ～ 8	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	20 ～ 500	g6	Induction Hardened (58HRC~)	-	-	8	0 ～ 496	-	-	6 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	20 ～ 500	g6	Induction Hardened (58HRC~)	-	8	-	0 ～ 496	-	4 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	20 ～ 500	g6	Induction Hardened (58HRC~)	-	8	-	0 ～ 496	-	-	-	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	20 ～ 500	g6	Induction Hardened (58HRC~)	-	8	8	0 ～ 496	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	4 ～ 8	4 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	4 ～ 8	-	-	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	8	0 ～ 496	4 ～ 8	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	-	4 ～ 8	6 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	-	-	6 ～ 8	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	8	0 ～ 496	-	-	6 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	8	-	0 ～ 496	-	4 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	8	-	0 ～ 496	-	-	-	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	8	8	0 ～ 496	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	4 ～ 10	4 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	4 ～ 10	-	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	8 ～ 10	0 ～ 496	4 ～ 10	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	-	4 ～ 10	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	-	-	6 ～ 10	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	8 ～ 10	0 ～ 496	-	-	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 10	-	0 ～ 496	-	4 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 10	-	0 ～ 496	-	-	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 10	8 ～ 10	0 ～ 496	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	4 ～ 10	4 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	4 ～ 10	-	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	8 ～ 10	0 ～ 496	4 ～ 10	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	-	4 ～ 10	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 496	-	-	6 ～ 10	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	8 ～ 10	0 ～ 496	-	-	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	30 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 10	-	0 ～ 496	-	4 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	30 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 10	-	0 ～ 496	-	-	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	30 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 10	8 ～ 10	0 ～ 496	-	-	-	-
-	1 Piece(s)	7 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 495	4 ～ 12	4 ～ 12	-	-
-	1 Piece(s)	7 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 495	4 ～ 12	-	-	6 ～ 12
-	1 Piece(s)	7 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	8 ～ 12	0 ～ 495	4 ～ 12	-	-	-
-	1 Piece(s)	7 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 495	-	4 ～ 12	6 ～ 12	-
-	1 Piece(s)	7 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 495	-	-	6 ～ 12	6 ～ 12
-	1 Piece(s)	7 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	8 ～ 12	0 ～ 495	-	-	6 ～ 12	-
-	1 Piece(s)	7 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	30 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 12	-	0 ～ 495	-	4 ～ 12	-	-
-	1 Piece(s)	7 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	30 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 12	-	0 ～ 495	-	-	-	6 ～ 12
-	1 Piece(s)	7 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	30 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 12	8 ～ 12	0 ～ 495	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 495	4 ～ 12	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 495	4 ～ 12	-	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	8 ～ 14	0 ～ 495	4 ～ 12	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 495	-	4 ～ 12	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 495	-	-	6 ～ 12	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 500	g6	Induction Hardened (58HRC~)	-	-	8 ～ 14	0 ～ 495	-	-	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 14	-	0 ～ 495	-	4 ～ 12	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 14	-	0 ～ 495	-	-	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 500	g6	Induction Hardened (58HRC~)	-	8 ～ 14	8 ～ 14	0 ～ 495	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	35 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	0 ～ 494	4 ～ 16	4 ～ 16	-	-

1
2
3
4
5
Next >>

Example

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Tapped	End Shape (Right)	Tapped
Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?