Due to an increase in demand, the lead time of some of the electrical items from our eCatalogue has increased abnormally and may cause delays in delivery or order suspension. We apologize for the inconvenience and appreciate your kind understanding. Once the supply will get normalized, we will update the same.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(514 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

RSAFM20-[25-500/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-N[6,8,10,12,16]

Material Heat Treatment Surface Treatment Shaft Dia. D Length L Hardness Change Thread M to Fine One [MMC] Change Thread M to Fine One [MMS] Change Thread N to Fine One [NMC] Change Thread N to Fine One [NMS] F T Threaded (Coarse) [M] Threaded (Coarse) [N] type Shaft Fit Tolerance CAD Days to Ship

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1490/1mm Unit(s)]
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Change Thread M to Fine One [MMC](mm)
6

8

10

12

15

17

20

25

30
Clear
Change Thread M to Fine One [MMS](mm)
10

12

14

18
Clear
Change Thread N to Fine One [NMC](mm)
6

8

10

12

15

17

20

25

30
Clear
Change Thread N to Fine One [NMS](mm)
10

12

14

18
Clear
F(mm)
[5-90/1mm Unit(s)]
Clear
T(mm)
[5-90/1mm Unit(s)]
Clear
Threaded (Coarse) [M](mm)
6

8

10

12

16

20

24

30
Clear
Threaded (Coarse) [N](mm)
6

8

10

12

16

20

24

30
Clear
type
- PSAFM
- PSAGM
- PSFMU
- PSSAFM
- PSSAGM
- PSSFMU
- RSAFM
- SAFM
- SFMU
- SSAFM
- SSFMU
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

8 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Precision Linear Shafts - Both Ends Male Thread with Undercut (Part Number)

Name: Precision Linear Shafts - Both Ends Male Thread with Undercut
Brand: MISUMI

Click this image to zoom it.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

RSAFM20-[25-500/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-N[6,8,10,12,16]

RSAFM20-[25-500/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMC[6,8,10,12,15,17]

RSAFM20-[25-500/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMS[10,12,14,18]

RSAFM20-[25-500/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-N[6,8,10,12,16]

RSAFM20-[25-500/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMC[6,8,10,12,15,17]

RSAFM20-[25-500/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMS[10,12,14,18]

RSAFM20-[25-500/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-N[6,8,10,12,16]

RSAFM20-[25-500/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMC[6,8,10,12,15,17]

RSAFM20-[25-500/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMS[10,12,14,18]

RSAFM25-[25-500/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-N[8,10,12,16,20,24]

RSAFM25-[25-500/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMC[8,10,12,15,17,20]

RSAFM25-[25-500/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMS[10,12,14,18]

RSAFM25-[25-500/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-N[8,10,12,16,20,24]

RSAFM25-[25-500/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-NMC[8,10,12,15,17,20]

RSAFM25-[25-500/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-NMS[10,12,14,18]

RSAFM25-[25-500/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-N[8,10,12,16,20,24]

RSAFM25-[25-500/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMC[8,10,12,15,17,20]

RSAFM25-[25-500/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMS[10,12,14,18]

RSAFM30-[25-500/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-N[8,10,12,16,20,24]

RSAFM30-[25-500/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMC[8,10,12,15,17,20,25]

RSAFM20-[25-500/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-N[6,8,10,12,16]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

[Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with male screw relief grooves on both ends. L size standard expanded! You can now purchase from an even more complete lineup.

Product TOP

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
RSAFM20-[25-500/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-N[6,8,10,12,16]
RSAFM20-[25-500/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMC[6,8,10,12,15,17]
RSAFM20-[25-500/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMS[10,12,14,18]
RSAFM20-[25-500/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-N[6,8,10,12,16]
RSAFM20-[25-500/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMC[6,8,10,12,15,17]
RSAFM20-[25-500/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMS[10,12,14,18]
RSAFM20-[25-500/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-N[6,8,10,12,16]
RSAFM20-[25-500/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMC[6,8,10,12,15,17]
RSAFM20-[25-500/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMS[10,12,14,18]
RSAFM25-[25-500/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-N[8,10,12,16,20,24]
RSAFM25-[25-500/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMC[8,10,12,15,17,20]
RSAFM25-[25-500/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMS[10,12,14,18]
RSAFM25-[25-500/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-N[8,10,12,16,20,24]
RSAFM25-[25-500/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-NMC[8,10,12,15,17,20]
RSAFM25-[25-500/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-NMS[10,12,14,18]
RSAFM25-[25-500/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-N[8,10,12,16,20,24]
RSAFM25-[25-500/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMC[8,10,12,15,17,20]
RSAFM25-[25-500/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMS[10,12,14,18]
RSAFM30-[25-500/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-N[8,10,12,16,20,24]
RSAFM30-[25-500/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMC[8,10,12,15,17,20,25]
RSAFM30-[25-500/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMS[10,12,14,18]
RSAFM30-[25-500/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-T[5-72/1]-N[8,10,12,16,20,24]
RSAFM30-[25-500/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-T[5-72/1]-NMC[8,10,12,15,17,20,25]
RSAFM30-[25-500/1]-F[5-72/1]-MMC[8,10,12,15,17,20,25]-T[5-72/1]-NMS[10,12,14,18]
RSAFM30-[25-500/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-N[8,10,12,16,20,24]
RSAFM30-[25-500/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMC[8,10,12,15,17,20,25]
RSAFM30-[25-500/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-NMS[10,12,14,18]
SAFM8-[25-790/1]-F[5-18/1]-M6-T[5-18/1]-N6
SAFM8-[25-790/1]-F[5-18/1]-M6-T[5-18/1]-NMC6
SAFM8-[25-790/1]-F[5-18/1]-MMC6-T[5-18/1]-N6
SAFM8-[25-790/1]-F[5-18/1]-MMC6-T[5-18/1]-NMC6
SAFM10-[25-790/1]-F[5-24/1]-M[6,8]-T[5-24/1]-N[6,8]
SAFM10-[25-790/1]-F[5-24/1]-M[6,8]-T[5-24/1]-NMC[6,8]
SAFM10-[25-790/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-N[6,8]
SAFM10-[25-790/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-NMC[6,8]
SAFM12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-N[6,8,10]
SAFM12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-NMC[6,8,10]
SAFM12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-NMS10
SAFM12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-N[6,8,10]
SAFM12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMC[6,8,10]
SAFM12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMS10
SAFM12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-N[6,8,10]
SAFM12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-NMC[6,8,10]
SAFM12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-NMS10
SAFM13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-N[6,8,10,12]
SAFM13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMC[6,8,10]
SAFM13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMS10
SAFM13-[25-990/1]-F[5-36/1]-MMC[6,8,10]-T[5-36/1]-N[6,8,10,12]
SAFM13-[25-990/1]-F[5-36/1]-MMC[6,8,10]-T[5-36/1]-NMC[6,8,10]
SAFM13-[25-990/1]-F[5-36/1]-MMC[6,8,10]-T[5-36/1]-NMS10
SAFM13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-N[6,8,10,12]
SAFM13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-NMC[6,8,10]
SAFM13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-NMS10
SAFM15-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-N[6,8,10,12]
SAFM15-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]
SAFM15-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMS[10,12]
SAFM15-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-N[6,8,10,12]
SAFM15-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]
SAFM15-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMS[10,12]
SAFM15-[25-990/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-N[6,8,10,12]
SAFM15-[25-990/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-NMC[6,8,10,12]
SAFM15-[25-990/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-NMS[10,12]
SAFM16-[25-1190/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-N[6,8,10,12]
SAFM16-[25-1190/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]
SAFM16-[25-1190/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMS[10,12,14]
SAFM16-[25-1190/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-N[6,8,10,12]
SAFM16-[25-1190/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]
SAFM16-[25-1190/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMS[10,12,14]
SAFM16-[25-1190/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-N[6,8,10,12]
SAFM16-[25-1190/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-NMC[6,8,10,12]
SAFM16-[25-1190/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-NMS[10,12,14]
SAFM18-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-N[6,8,10,12,16]
SAFM18-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMC[6,8,10,12,15]
SAFM18-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMS[10,12,14]
SAFM18-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15]-T[5-48/1]-N[6,8,10,12,16]
SAFM18-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15]-T[5-48/1]-NMC[6,8,10,12,15]
SAFM18-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15]-T[5-48/1]-NMS[10,12,14]
SAFM18-[25-1190/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-N[6,8,10,12,16]
SAFM18-[25-1190/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-NMC[6,8,10,12,15]
SAFM18-[25-1190/1]-F[5-48/1]-MMS[10,12,14]-T[5-48/1]-NMS[10,12,14]
SAFM20-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-N[6,8,10,12,16]
SAFM20-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMC[6,8,10,12,15,17]
SAFM20-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMS[10,12,14,18]
SAFM20-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-N[6,8,10,12,16]
SAFM20-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMC[6,8,10,12,15,17]
SAFM20-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMS[10,12,14,18]
SAFM20-[25-1190/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-N[6,8,10,12,16]
SAFM20-[25-1190/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMC[6,8,10,12,15,17]
SAFM20-[25-1190/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMS[10,12,14,18]
SAFM25-[25-1190/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-N[8,10,12,16,20,24]

Price	Minimum Order Qty.	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Change Thread M to Fine One [MMC] (mm)	Change Thread M to Fine One [MMS] (mm)	Change Thread N to Fine One [NMC] (mm)	Change Thread N to Fine One [NMS] (mm)	F (mm)	T (mm)	Threaded (Coarse) [M] (mm)	Threaded (Coarse) [N] (mm)
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 48	5 ～ 48	6 ～ 16	6 ～ 16
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	6 ～ 17	-	5 ～ 48	5 ～ 48	6 ～ 16	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	10 ～ 18	5 ～ 48	5 ～ 48	6 ～ 16	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	6 ～ 17	-	-	-	5 ～ 48	5 ～ 48	-	6 ～ 16
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	6 ～ 17	-	6 ～ 17	-	5 ～ 48	5 ～ 48	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	6 ～ 17	-	-	10 ～ 18	5 ～ 48	5 ～ 48	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	10 ～ 18	-	-	5 ～ 48	5 ～ 48	-	6 ～ 16
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	10 ～ 18	6 ～ 17	-	5 ～ 48	5 ～ 48	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	10 ～ 18	-	10 ～ 18	5 ～ 48	5 ～ 48	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 72	5 ～ 72	8 ～ 24	8 ～ 24
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	8 ～ 20	-	5 ～ 72	5 ～ 72	8 ～ 24	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	10 ～ 18	5 ～ 72	5 ～ 72	8 ～ 24	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	8 ～ 20	-	-	-	5 ～ 72	5 ～ 72	-	8 ～ 24
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	8 ～ 20	-	8 ～ 20	-	5 ～ 72	5 ～ 72	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	8 ～ 20	-	-	10 ～ 18	5 ～ 72	5 ～ 72	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	10 ～ 18	-	-	5 ～ 72	5 ～ 72	-	8 ～ 24
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	10 ～ 18	8 ～ 20	-	5 ～ 72	5 ～ 72	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	10 ～ 18	-	10 ～ 18	5 ～ 72	5 ～ 72	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 72	5 ～ 72	8 ～ 24	8 ～ 24
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	8 ～ 25	-	5 ～ 72	5 ～ 72	8 ～ 24	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	-	-	10 ～ 18	5 ～ 72	5 ～ 72	8 ～ 24	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	8 ～ 25	-	-	-	5 ～ 72	5 ～ 72	-	8 ～ 24
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	8 ～ 25	-	8 ～ 25	-	5 ～ 72	5 ～ 72	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	8 ～ 25	-	-	10 ～ 18	5 ～ 72	5 ～ 72	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	10 ～ 18	-	-	5 ～ 72	5 ～ 72	-	8 ～ 24
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	10 ～ 18	8 ～ 25	-	5 ～ 72	5 ～ 72	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	10 ～ 18	-	10 ～ 18	5 ～ 72	5 ～ 72	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 790	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 18	5 ～ 18	6	6
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 790	g6	Induction Hardened (58HRC~)	-	-	6	-	5 ～ 18	5 ～ 18	6	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 790	g6	Induction Hardened (58HRC~)	6	-	-	-	5 ～ 18	5 ～ 18	-	6
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 790	g6	Induction Hardened (58HRC~)	6	-	6	-	5 ～ 18	5 ～ 18	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 790	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 24	5 ～ 24	6 ～ 8	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 790	g6	Induction Hardened (58HRC~)	-	-	6 ～ 8	-	5 ～ 24	5 ～ 24	6 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 790	g6	Induction Hardened (58HRC~)	6 ～ 8	-	-	-	5 ～ 24	5 ～ 24	-	6 ～ 8
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 790	g6	Induction Hardened (58HRC~)	6 ～ 8	-	6 ～ 8	-	5 ～ 24	5 ～ 24	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 30	5 ～ 30	6 ～ 10	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	6 ～ 10	-	5 ～ 30	5 ～ 30	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	10	5 ～ 30	5 ～ 30	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 10	-	-	-	5 ～ 30	5 ～ 30	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 10	-	6 ～ 10	-	5 ～ 30	5 ～ 30	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 10	-	-	10	5 ～ 30	5 ～ 30	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10	-	-	5 ～ 30	5 ～ 30	-	6 ～ 10
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10	6 ～ 10	-	5 ～ 30	5 ～ 30	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10	-	10	5 ～ 30	5 ～ 30	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 36	5 ～ 36	6 ～ 12	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	6 ～ 10	-	5 ～ 36	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	10	5 ～ 36	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 10	-	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 10	-	6 ～ 10	-	5 ～ 36	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 10	-	-	10	5 ～ 36	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10	6 ～ 10	-	5 ～ 36	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10	-	10	5 ～ 36	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 36	5 ～ 36	6 ～ 12	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	6 ～ 12	-	5 ～ 36	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 990	g6	Induction Hardened (58HRC~)	-	-	-	10 ～ 12	5 ～ 36	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 12	-	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 12	-	6 ～ 12	-	5 ～ 36	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 12	-	-	10 ～ 12	5 ～ 36	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 12	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 12	6 ～ 12	-	5 ～ 36	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 990	g6	Induction Hardened (58HRC~)	-	10 ～ 12	-	10 ～ 12	5 ～ 36	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 36	5 ～ 36	6 ～ 12	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	-	6 ～ 12	-	5 ～ 36	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	-	-	10 ～ 14	5 ～ 36	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 12	-	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 12	-	6 ～ 12	-	5 ～ 36	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 12	-	-	10 ～ 14	5 ～ 36	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	10 ～ 14	-	-	5 ～ 36	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	10 ～ 14	6 ～ 12	-	5 ～ 36	5 ～ 36	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	10 ～ 14	-	10 ～ 14	5 ～ 36	5 ～ 36	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 48	5 ～ 48	6 ～ 16	6 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	-	6 ～ 15	-	5 ～ 48	5 ～ 48	6 ～ 16	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	-	-	10 ～ 14	5 ～ 48	5 ～ 48	6 ～ 16	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 15	-	-	-	5 ～ 48	5 ～ 48	-	6 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 15	-	6 ～ 15	-	5 ～ 48	5 ～ 48	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 15	-	-	10 ～ 14	5 ～ 48	5 ～ 48	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	10 ～ 14	-	-	5 ～ 48	5 ～ 48	-	6 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	10 ～ 14	6 ～ 15	-	5 ～ 48	5 ～ 48	-	-
-	1 Piece(s)	8 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	10 ～ 14	-	10 ～ 14	5 ～ 48	5 ～ 48	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 48	5 ～ 48	6 ～ 16	6 ～ 16
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	-	6 ～ 17	-	5 ～ 48	5 ～ 48	6 ～ 16	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	-	-	10 ～ 18	5 ～ 48	5 ～ 48	6 ～ 16	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 17	-	-	-	5 ～ 48	5 ～ 48	-	6 ～ 16
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 17	-	6 ～ 17	-	5 ～ 48	5 ～ 48	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 17	-	-	10 ～ 18	5 ～ 48	5 ～ 48	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	10 ～ 18	-	-	5 ～ 48	5 ～ 48	-	6 ～ 16
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	10 ～ 18	6 ～ 17	-	5 ～ 48	5 ～ 48	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	10 ～ 18	-	10 ～ 18	5 ～ 48	5 ～ 48	-	-
-	1 Piece(s)	6 Day(s)	10	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1190	g6	Induction Hardened (58HRC~)	-	-	-	-	5 ～ 72	5 ～ 72	8 ～ 24	8 ～ 24

Basic Information

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	Threaded
Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand

Search by Category

How can we improve?