Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(50 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

RSFPA8-[25-798/1]-F[2-24/1]-P6-M3-N[3,4,5]-SC[0-790/1]

Material Heat Treatment Shaft Dia. D Length L Shaft Fit Tolerance Hardness Add Wrench Flats at One Location [SC] Change Tapped Thread N to Fine One [NSC] F P Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] type Surface Treatment CAD Days to Ship

Specification/Dimensions

Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1498/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Add Wrench Flats at One Location [SC](mm)
[0-1483/1mm Unit(s)]
Clear
Change Tapped Thread N to Fine One [NSC](mm)
8

10

12

14

18
Clear
F(mm)
[2-108/1mm Unit(s)]
Clear
P(mm)
6
[6-27/1mm Unit(s)]
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)
6

8

10

12

16

20
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)
6

8

10

12

16

20
Clear
type
- PFPGA
- PSFPA
- PSFPGA
- PSFUP
- PSSFPA
- PSSFUP
- RSFPA
- SFPPA
- SFUP
- SSFPA
- SSFUP
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

8 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats-

Name: Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats-
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

RSFPA8-[25-798/1]-F[2-24/1]-P6-M3-N[3,4,5]-SC[0-790/1]

RSFPA10-[25-798/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-N[3,4,5,6]-SC[0-790/1]

RSFPA12-[25-998/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-N[4,5,6,8]-SC[0-988/1]

RSFPA12-[25-998/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-ND6-SC[0-988/1]

RSFPA12-[25-998/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-NSC8-SC[0-988/1]

RSFPA12-[25-998/1]-F[2-40/1]-P[6-10/1]-MD6-N[4,5,6,8]-SC[0-988/1]

RSFPA12-[25-998/1]-F[2-40/1]-P[6-10/1]-MD6-ND6-SC[0-988/1]

RSFPA12-[25-998/1]-F[2-40/1]-P[6-10/1]-MD6-NSC8-SC[0-988/1]

RSFPA13-[25-998/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-N[4,5,6,8]-SC[0-988/1]

RSFPA13-[25-998/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-ND[6,8]-SC[0-988/1]

RSFPA13-[25-998/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-NSC8-SC[0-988/1]

RSFPA13-[25-998/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-N[4,5,6,8]-SC[0-988/1]

RSFPA13-[25-998/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-ND[6,8]-SC[0-988/1]

RSFPA13-[25-998/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-NSC8-SC[0-988/1]

RSFPA15-[25-998/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-N[4,5,6,8,10]-SC[0-988/1]

RSFPA15-[25-998/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-ND[6,8,10]-SC[0-988/1]

RSFPA15-[25-998/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-NSC[8,10]-SC[0-988/1]

RSFPA15-[25-998/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-N[4,5,6,8,10]-SC[0-988/1]

RSFPA15-[25-998/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-ND[6,8,10]-SC[0-988/1]

RSFPA15-[25-998/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-NSC[8,10]-SC[0-988/1]

RSFPA8-[25-798/1]-F[2-24/1]-P6-M3-N[3,4,5]-SC[0-790/1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

Please check the content on our website as the PDF does not contain the most up-to-date information.

Product Description

[Specification expansion] In response to many requests, a new spanner grooved type with a stepped end and a female thread on one end is now available!

Linear Shafts-One End Male Thread with Thread Dia. Equal to Shaft Dia.-:Related Image

Type				[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
One End Stepped, Both Ends Tapped			One End Stepped, One End Tapped
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6
SFPPA	SFUP	-	SFNNA	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent 58HRC~ SUS440C or 13Cr stainless 56HRC~	-
SSFPA	SSFUP	-	SSFNNA	SUS440C or 13Cr stainless		-
PSFPA	PSFUP	-	PSFNNA	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More ~
PSSFPA	PSSFUP	-	PSSFNNA	SUS440C or 13Cr stainless
RSFPA	-	-	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PFPGA	-	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More ~
-	-	PSFPGA	-	SUS304	-

D Tol.
D	g6	h5	f8
8	-0.005 -0.014	0 -0.006	-0.013 -0.035
10
12	-0.006 -0.017	0 -0.008	-0.016 -0.043
13
15
16
18
20	-0.007 -0.020	0 -0.009	-0.020 -0.053
25
30
35	-0.009 -0.025	0 -0.011	-0.025 -0.064
40
50

Specifications

Part Number	-	L	-	F	-	P	-	M	-	N	-	SC
SFPPA20 SSFPA20	- -	400 400	- -	F25 F25	- -	P16 P16	- -	M10 M10	- -	N10 N10	- -	SC10 SC10

Part Number			1mm Increments			M (Coarse) Selection											N (Coarse) Selection											Wrench Flats Dimensions			(Y)Max.	R	C
Type		D	L	F	P	M (Coarse) Selection											N (Coarse) Selection											SC	W	ℓ₁	(Y)Max.	R	C
• One End Stepped, (D Tol. g6) SFPPA SSFPA PSFPA PSSFPA RSFPA (D≤30, L≤500) (D Tol. f8) PFPGA PSFPGA • One End Stepped, One (D Tol. g6) SFNNA SSFNNA PSFNNA PSSFNNA	Both Ends Tapped Tapped (D Tol. h5) SFUP SSFUP PSFUP PSSFUP End Threaded Tapped	8	25~ 998	2≤F≤Px4	6	3											3	4	5									SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	7	8	800	0.3 or Less	0.5 or Less
		10	25~ 998		6 ~ 8	3	4	5									3	4	5	6									8	8	800
		12	25~1198		6~10	3	4	5	6									4	5	6	8								10	10	1000
		13	25~1198		6~11	3	4	5	6	8								4	5	6	8								11		1000
		15	25~1198		6~13	3	4	5	6	8	10							4	5	6	8	10							13		1000
		16	25~1198		6~14	3	4	5	6	8	10							4	5	6	8	10							14		1200
		18	25~1198		8~16		4	5	6	8	10	12						4	5	6	8	10	12						16		1200
		20	25~1198		8~17		4	5	6	8	10	12						4	5	6	8	10	12						17		1200		1.0 or Less
		25	25~1198		8~22		4	5	6	8	10	12	16					4	5	6	8	10	12	16					22		1200
		30	25~1498		9~27			5	6	8	10	12	16	20	24					6	8	10	12	16	20				27	15	1500
		35	25~1498		9~32			5	6	8	10	12	16	20	24						8	10	12	16	20	24			30	15	1500	0.5 or Less
		40	25~1498		11~37				6	8	10	12	16	20	24	30						10	12	16	20	24	30		36	20	1500
		50	25~1498		11~47				6	8	10	12	16	20	24	30							12	16	20	24	30		41	20	1500

[ ! ]P dimensions require M+3≤P.
[ ! ]When Mx2.5+4+Nx2.5+4≥(Y), tap pilot holes may go through. When Mx2+Nx2≥(Y), the effective depth of larger diameter tap has priority.

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
RSFPA8-[25-798/1]-F[2-24/1]-P6-M3-N[3,4,5]-SC[0-790/1]
RSFPA10-[25-798/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-N[3,4,5,6]-SC[0-790/1]
RSFPA12-[25-998/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-N[4,5,6,8]-SC[0-988/1]
RSFPA12-[25-998/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-ND6-SC[0-988/1]
RSFPA12-[25-998/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-NSC8-SC[0-988/1]
RSFPA12-[25-998/1]-F[2-40/1]-P[6-10/1]-MD6-N[4,5,6,8]-SC[0-988/1]
RSFPA12-[25-998/1]-F[2-40/1]-P[6-10/1]-MD6-ND6-SC[0-988/1]
RSFPA12-[25-998/1]-F[2-40/1]-P[6-10/1]-MD6-NSC8-SC[0-988/1]
RSFPA13-[25-998/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-N[4,5,6,8]-SC[0-988/1]
RSFPA13-[25-998/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-ND[6,8]-SC[0-988/1]
RSFPA13-[25-998/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-NSC8-SC[0-988/1]
RSFPA13-[25-998/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-N[4,5,6,8]-SC[0-988/1]
RSFPA13-[25-998/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-ND[6,8]-SC[0-988/1]
RSFPA13-[25-998/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-NSC8-SC[0-988/1]
RSFPA15-[25-998/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-N[4,5,6,8,10]-SC[0-988/1]
RSFPA15-[25-998/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-ND[6,8,10]-SC[0-988/1]
RSFPA15-[25-998/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-NSC[8,10]-SC[0-988/1]
RSFPA15-[25-998/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-N[4,5,6,8,10]-SC[0-988/1]
RSFPA15-[25-998/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-ND[6,8,10]-SC[0-988/1]
RSFPA15-[25-998/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-NSC[8,10]-SC[0-988/1]
RSFPA16-[25-1198/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-N[4,5,6,8,10]-SC[0-1188/1]
RSFPA16-[25-1198/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-ND[6,8,10]-SC[0-1188/1]
RSFPA16-[25-1198/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-NSC[8,10]-SC[0-1188/1]
RSFPA16-[25-1198/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10]-N[4,5,6,8,10]-SC[0-1188/1]
RSFPA16-[25-1198/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10]-ND[6,8,10]-SC[0-1188/1]
RSFPA16-[25-1198/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10]-NSC[8,10]-SC[0-1188/1]
RSFPA18-[25-1198/1]-F[2-60/1]-P[6-16/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]-SC[0-1188/1]
RSFPA18-[25-1198/1]-F[2-60/1]-P[6-16/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]-SC[0-1188/1]
RSFPA18-[25-1198/1]-F[2-60/1]-P[6-16/1]-M[4,5,6,8,10,12]-NSC[8,10,12]-SC[0-1188/1]
RSFPA18-[25-1198/1]-F[2-60/1]-P[6-16/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]-SC[0-1188/1]
RSFPA18-[25-1198/1]-F[2-60/1]-P[6-16/1]-MD[6,8,10,12]-ND[6,8,10,12]-SC[0-1188/1]
RSFPA18-[25-1198/1]-F[2-60/1]-P[6-16/1]-MD[6,8,10,12]-NSC[8,10,12]-SC[0-1188/1]
RSFPA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]-SC[0-1188/1]
RSFPA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]-SC[0-1188/1]
RSFPA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12]-NSC[8,10,12,14]-SC[0-1188/1]
RSFPA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]-SC[0-1188/1]
RSFPA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-MD[6,8,10,12]-ND[6,8,10,12]-SC[0-1188/1]
RSFPA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-MD[6,8,10,12]-NSC[8,10,12,14]-SC[0-1188/1]
RSFPA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16]-SC[0-1188/1]
RSFPA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16]-ND[6,8,10,12,16]-SC[0-1188/1]
RSFPA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16]-NSC[8,10,12,14,18]-SC[0-1188/1]
RSFPA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-MD[6,8,10,12,16]-N[4,5,6,8,10,12,16]-SC[0-1188/1]
RSFPA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-MD[6,8,10,12,16]-ND[6,8,10,12,16]-SC[0-1188/1]
RSFPA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-MD[6,8,10,12,16]-NSC[8,10,12,14,18]-SC[0-1188/1]
RSFPA30-[25-1498/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20,24]-N[6,8,10,12,16,20]-SC[0-1483/1]
RSFPA30-[25-1498/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20,24]-ND[6,8,10,12,16,20]-SC[0-1483/1]
RSFPA30-[25-1498/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20,24]-NSC[8,10,12,14,18]-SC[0-1483/1]
RSFPA30-[25-1498/1]-F[2-108/1]-P[9-27/1]-MD[6,8,10,12,16,20]-N[6,8,10,12,16,20]-SC[0-1483/1]
RSFPA30-[25-1498/1]-F[2-108/1]-P[9-27/1]-MD[6,8,10,12,16,20]-ND[6,8,10,12,16,20]-SC[0-1483/1]
RSFPA30-[25-1498/1]-F[2-108/1]-P[9-27/1]-MD[6,8,10,12,16,20]-NSC[8,10,12,14,18]-SC[0-1483/1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Add Wrench Flats at One Location [SC] (mm)	Change Tapped Thread N to Fine One [NSC] (mm)	F (mm)	P (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] (mm)
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	8	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 790	-	2 ～ 24	6	3	3 ～ 5	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	10	25 ～ 798	g6	Induction Hardened (58HRC~)	0 ～ 790	-	2 ～ 32	6 ～ 8	3 ～ 5	3 ～ 6	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 40	6 ～ 10	3 ～ 6	4 ～ 8	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 40	6 ～ 10	3 ～ 6	-	-	6
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	8	2 ～ 40	6 ～ 10	3 ～ 6	-	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 40	6 ～ 10	-	4 ～ 8	6	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 40	6 ～ 10	-	-	6	6
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	12	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	8	2 ～ 40	6 ～ 10	-	-	6	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 44	6 ～ 11	3 ～ 8	4 ～ 8	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 44	6 ～ 11	3 ～ 8	-	-	6 ～ 8
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	8	2 ～ 44	6 ～ 11	3 ～ 8	-	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 44	6 ～ 11	-	4 ～ 8	6 ～ 8	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 44	6 ～ 11	-	-	6 ～ 8	6 ～ 8
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	8	2 ～ 44	6 ～ 11	-	-	6 ～ 8	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 52	6 ～ 13	3 ～ 10	4 ～ 10	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 52	6 ～ 13	3 ～ 10	-	-	6 ～ 10
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	8 ～ 10	2 ～ 52	6 ～ 13	3 ～ 10	-	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 52	6 ～ 13	-	4 ～ 10	6 ～ 10	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	-	2 ～ 52	6 ～ 13	-	-	6 ～ 10	6 ～ 10
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 988	8 ～ 10	2 ～ 52	6 ～ 13	-	-	6 ～ 10	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 56	6 ～ 14	3 ～ 10	4 ～ 10	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 56	6 ～ 14	3 ～ 10	-	-	6 ～ 10
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	8 ～ 10	2 ～ 56	6 ～ 14	3 ～ 10	-	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 56	6 ～ 14	-	4 ～ 10	6 ～ 10	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 56	6 ～ 14	-	-	6 ～ 10	6 ～ 10
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	8 ～ 10	2 ～ 56	6 ～ 14	-	-	6 ～ 10	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 60	6 ～ 16	4 ～ 12	4 ～ 12	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 60	6 ～ 16	4 ～ 12	-	-	6 ～ 12
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	8 ～ 12	2 ～ 60	6 ～ 16	4 ～ 12	-	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 60	6 ～ 16	-	4 ～ 12	6 ～ 12	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 60	6 ～ 16	-	-	6 ～ 12	6 ～ 12
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	18	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	8 ～ 12	2 ～ 60	6 ～ 16	-	-	6 ～ 12	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 68	8 ～ 17	4 ～ 12	4 ～ 12	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 68	8 ～ 17	4 ～ 12	-	-	6 ～ 12
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	8 ～ 14	2 ～ 68	8 ～ 17	4 ～ 12	-	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 68	8 ～ 17	-	4 ～ 12	6 ～ 12	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 68	8 ～ 17	-	-	6 ～ 12	6 ～ 12
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	8 ～ 14	2 ～ 68	8 ～ 17	-	-	6 ～ 12	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 88	8 ～ 22	4 ～ 16	4 ～ 16	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 88	8 ～ 22	4 ～ 16	-	-	6 ～ 16
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	8 ～ 18	2 ～ 88	8 ～ 22	4 ～ 16	-	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 88	8 ～ 22	-	4 ～ 16	6 ～ 16	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	-	2 ～ 88	8 ～ 22	-	-	6 ～ 16	6 ～ 16
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1188	8 ～ 18	2 ～ 88	8 ～ 22	-	-	6 ～ 16	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	-	2 ～ 108	9 ～ 27	5 ～ 24	6 ～ 20	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	-	2 ～ 108	9 ～ 27	5 ～ 24	-	-	6 ～ 20
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	8 ～ 18	2 ～ 108	9 ～ 27	5 ～ 24	-	-	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	-	2 ～ 108	9 ～ 27	-	6 ～ 20	6 ～ 20	-
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	-	2 ～ 108	9 ～ 27	-	-	6 ～ 20	6 ～ 20
-	1 Piece(s)	13 Day(s) or more	10	[Steel] SUJ2 Equivalent	Induction Hardened	Low Temperature Black Chrome Plating	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1483	8 ～ 18	2 ～ 108	9 ～ 27	-	-	6 ～ 20	-

Price list

Part Number		Unit Price
Type	D	Min. L ~ 50	L51 ~ 100	L101 ~ 150	L151 ~ 200	L201 ~ 250	L251 ~ 300	L301 ~ 350	L351 ~ 400	L401 ~ 450	L451 ~ 500	L501 ~ 550	L551 ~ 600	L601 ~ 650	L651 ~ 700	L701 ~ 750	L751 ~ 800	L801 ~ 850	L851 ~ 900	L901 ~ 950	L951 ~ 1000	L1001 ~ 1100	L1101 ~ 1200	L1201 ~ 1300	L1301 ~ 1400	L1401 ~ 1498
SFPPA [ ! ]SFUP [ ! ]SFNNA	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50
SSFPA [ ! ]SSFUP [ ! ]SSFNNA	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50
PSFPA [ ! ]PSFUP [ ! ]PSFNNA	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50
PSSFPA [ ! ]PSSFUP [ ! ]PSSFNNA	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50

[ ! ]For D tolerance h5, add the relevant surcharge to the prices above. [ ! ]For One End Stepped One End Tapped Shafts, subtract the relevant charge from the prices above.

Part Number		Unit Price
Type	D	Min. L ~ 50	L51 ~ 100	L101 ~ 150	L151 ~ 200	L201 ~ 300	L301 ~ 400	L401 ~ 500
RSFPA	8
	10
	12
	13
	15
	16
	18
	20
	25
	30

Part Number		Unit Price
Type	D	Min. L ~ 100	L101 ~ 200	L201 ~ 400	L401 ~ 600	L601 ~ 800	L801 ~ 1000	L1001 ~ 1200	L1201 ~ 1496
PFPGA	8						-	-	-
	10						-	-	-
	12							-	-
	13							-	-
	15, 16								-
	18, 20								-
	25								-
	30
	35
	40
	50

Part Number		Unit Price
Type	D	Min. L ~ 100	L101 ~ 200	L201 ~ 400	L401 ~ 600	L601 ~ 800	L801 ~ 1000	L1001 ~ 1200	L1201 ~ 1496
PSFPGA	8						-	-	-
	10						-	-	-
	12							-	-
	13							-	-
	15, 16								-
	18, 20								-
	25								-
	30
	35
	40
	50

Product TOP

Basic Information

Basic Shape	One End Stepped	End Shape (Left)	Tapped	End Shape (Right)	Tapped
Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?

Configure

Specification/Dimensions

Material

Heat Treatment

Shaft Dia. D(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

Add Wrench Flats at One Location [SC](mm)

Change Tapped Thread N to Fine One [NSC](mm)

F(mm)

P(mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)

type

Surface Treatment

CAD

Days to Ship

Specify Alterations

Linear Shafts-One End Stepped, Both Ends Female Thread with Wrench Flats-

Copy Part Number URL to Clipboard

(i) Caution

Product Description

Specifications

Alterations

Part Number

Price list

Basic Information

Payment Method

Customer Service

My Account

About MISUMI

Related Sites

Social Media

MISUMI India Contact

Customer Service

日本語でのお問い合わせはジャパンデスクまで

(i)
Caution