Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(352 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

SFEU12-[25-1398/1]-F[2-40/1]-P[3-10/1]-NSC8

End Shape (Left) Material Heat Treatment Surface Treatment Shaft Dia. D Length L Hardness Change Tapped Thread N to Fine One [NSC] F P Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] type Shaft Fit Tolerance CAD Days to Ship

Specification/Dimensions

End Shape (Left)
- No Machining
- Tapped
Clear
Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1498/1mm Unit(s)]
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Change Tapped Thread N to Fine One [NSC](mm)
8

10

12

14

18
Clear
F(mm)
[2-188/1mm Unit(s)]
Clear
P(mm)
6
[3-47/1mm Unit(s)]
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)
6

8

10

12

16

20
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)
6

8

10

12

16

20
Clear
type
- PSFAA
- PSFEU
- PSFGA
- PSFNA
- PSFUE
- PSNGA
- PSSFAA
- PSSFEU
- PSSFGA
- PSSFNA
- PSSFUE
- PSSNGA
- RSFAA
- RSFNA
- SFAA
- SFEU
- SFNA
- SFUE
- SSFAA
- SSFEU
- SSFNA
- SSFUE
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

8 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Linear Shafts-One End Stepped, Both Ends Female Thread- (Part Number)

Name: Linear Shafts-One End Stepped, Both Ends Female Thread-
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

SFEU12-[25-1398/1]-F[2-40/1]-P[3-10/1]-NSC8

SFEU13-[25-1398/1]-F[2-44/1]-P[4-11/1]-N[3,4,5,6,8]

SFEU13-[25-1398/1]-F[2-44/1]-P[4-11/1]-ND[6,8]

SFEU13-[25-1398/1]-F[2-44/1]-P[4-11/1]-NSC8

SFEU15-[25-1398/1]-F[2-52/1]-P[4-13/1]-N[3,4,5,6,8,10]

SFEU15-[25-1398/1]-F[2-52/1]-P[4-13/1]-ND[6,8,10]

SFEU15-[25-1398/1]-F[2-52/1]-P[4-13/1]-NSC[8,10]

SFEU16-[25-1398/1]-F[2-56/1]-P[4-14/1]-N[4,5,6,8,10]

SFEU16-[25-1398/1]-F[2-56/1]-P[4-14/1]-ND[6,8,10]

SFEU16-[25-1398/1]-F[2-56/1]-P[4-14/1]-NSC[8,10]

SFEU18-[25-1398/1]-F[2-60/1]-P[5-16/1]-N[4,5,6,8,10,12]

SFEU18-[25-1398/1]-F[2-60/1]-P[5-16/1]-ND[6,8,10,12]

SFEU18-[25-1398/1]-F[2-60/1]-P[5-16/1]-NSC[8,10,12]

SFEU20-[25-1398/1]-F[2-68/1]-P[5-17/1]-N[4,5,6,8,10,12]

SFEU20-[25-1398/1]-F[2-68/1]-P[5-17/1]-ND[6,8,10,12]

SFEU20-[25-1398/1]-F[2-68/1]-P[5-17/1]-NSC[8,10,12,14]

SFEU25-[25-1398/1]-F[2-88/1]-P[6-22/1]-N[4,5,6,8,10,12,16]

SFEU25-[25-1398/1]-F[2-88/1]-P[6-22/1]-ND[6,8,10,12,16]

SFEU25-[25-1398/1]-F[2-88/1]-P[6-22/1]-NSC[8,10,12,14,18]

SFEU30-[25-1498/1]-F[2-108/1]-P[6-27/1]-N[6,8,10,12,16,20]

SFEU12-[25-1398/1]-F[2-40/1]-P[3-10/1]-NSC8

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

Please check the content on our website as the PDF does not contain the most up-to-date information.

Product Description

[Features] Shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with one end stepped and both ends female threaded/one end stepped and one end female threaded. L size standard expanded! You can now purchase from an even more complete lineup.

Linear Shafts-One End Male Thread with Thread Dia. Equal to Shaft Dia.-:Related Image

Type						[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
One End Stepped, Both Ends Tapped			One End Stepped, One End Tapped
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. h5	D Tol. f8
SFAA	SFUE	-	SFNA	SFEU	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent 58HRC~ SUS440C or 13Cr stainless 56HRC~	-
SSFAA	SSFUE	-	SSFNA	SSFEU	-	SUS440C or 13Cr stainless		-
PSFAA	PSFUE	-	PSFNA	PSFEU	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More ~
PSSFAA	PSSFUE	-	PSSFNA	PSSFEU	-	SUS440C or 13Cr stainless
RSFAA	-	-	RSFNA	-	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGA	-	-	PSNGA	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More ~
-	-	PSSFGA	-	-	PSSNGA	SUS304	-

D Tol.
D	g6	h5	f8
8	-0.005 -0.014	0 -0.006	-0.013 -0.035
10
12	-0.006 -0.017	0 -0.008	-0.016 -0.043
13
15
16
18
20	-0.007 -0.020	0 -0.009	-0.020 -0.053
25
30
35	-0.009 -0.025	0 -0.011	-0.025 -0.064
40
50

Specifications

Part Number	-	L	-	F	-	P	-	M	-	N
SFAA20	-	400	-	F25	-	P16	-	M10	-	N10
SFUE20	-	400	-	F25	-	P16	-	M10	-	N10
SFNA20	-	400	-	F25	-	P15			-	N10

Part Number					1mm Increments			M (Coarse) Selection											N (Coarse) Selection											(Y)Max.	R	C
Type				D	L	F	P	M (Coarse) Selection											N (Coarse) Selection											(Y)Max.	R	C
One End Stepped, Both Ends Tapped (D Tol. g6) SFAA SSFAA PSFAA PSSFAA RSFAA (D≤30, L≤500) (D Tol. f8) PSFGA PSSFGA	(D Tol. h5) SFUE SSFUE PSFUE PSSFUE	One End Stepped One End Tapped (D Tol. g6) SFNA SSFNA PSFNA PSSFNA RSFNA (D≤30, L≤500) (D Tol. f8) PSNGA PSSNGA	(D Tol. h5) SFEU SSFEU PSFEU PSSFEU	8	25~ 998	2≤F≤Px4	6	3											3	4	5									800	0.3 or Less	0.5 or Less
				10	25~ 998		6 ~ 8	3	4	5									3	4	5	6								800
				12	25~1198		6~10	3	4	5	6									4	5	6	8							1000
				13	25~1198		6~11	3	4	5	6	8								4	5	6	8							1000
				15	25~1198		6~13	3	4	5	6	8	10							4	5	6	8	10						1000
				16	25~1198		6~14	3	4	5	6	8	10							4	5	6	8	10						1200
				18	25~1198		8~16		4	5	6	8	10	12						4	5	6	8	10	12					1200
				20	25~1198		8~17		4	5	6	8	10	12						4	5	6	8	10	12					1200		1.0 or Less
				25	25~1198		8~22		4	5	6	8	10	12	16					4	5	6	8	10	12	16				1200
				30	25~1498		9~27			5	6	8	10	12	16	20	24					6	8	10	12	16	20			1500
				35	25~1498		9~32			5	6	8	10	12	16	20	24						8	10	12	16	20	24		1500	0.5 or Less
				40	25~1498		11~37				6	8	10	12	16	20	24	30						10	12	16	20	24	30	1500
				50	25~1498		11~47				6	8	10	12	16	20	24	30							12	16	20	24	30	1500

[ ! ]P dimensions require M+3≤P. [ ! ]When D-P≤4, stepped section chamfer C is 0.2 or less. [ ! ]For One End Stepped One End Tapped Type, L dimensions require Nx3≤L.
[ ! ]When Mx2.5+4+Nx2.5+4≥(Y), tap pilot holes may go through. When Mx2+Nx2≥(Y), the effective depth of larger diameter tap has priority.

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
SFEU12-[25-1398/1]-F[2-40/1]-P[3-10/1]-NSC8
SFEU13-[25-1398/1]-F[2-44/1]-P[4-11/1]-N[3,4,5,6,8]
SFEU13-[25-1398/1]-F[2-44/1]-P[4-11/1]-ND[6,8]
SFEU13-[25-1398/1]-F[2-44/1]-P[4-11/1]-NSC8
SFEU15-[25-1398/1]-F[2-52/1]-P[4-13/1]-N[3,4,5,6,8,10]
SFEU15-[25-1398/1]-F[2-52/1]-P[4-13/1]-ND[6,8,10]
SFEU15-[25-1398/1]-F[2-52/1]-P[4-13/1]-NSC[8,10]
SFEU16-[25-1398/1]-F[2-56/1]-P[4-14/1]-N[4,5,6,8,10]
SFEU16-[25-1398/1]-F[2-56/1]-P[4-14/1]-ND[6,8,10]
SFEU16-[25-1398/1]-F[2-56/1]-P[4-14/1]-NSC[8,10]
SFEU18-[25-1398/1]-F[2-60/1]-P[5-16/1]-N[4,5,6,8,10,12]
SFEU18-[25-1398/1]-F[2-60/1]-P[5-16/1]-ND[6,8,10,12]
SFEU18-[25-1398/1]-F[2-60/1]-P[5-16/1]-NSC[8,10,12]
SFEU20-[25-1398/1]-F[2-68/1]-P[5-17/1]-N[4,5,6,8,10,12]
SFEU20-[25-1398/1]-F[2-68/1]-P[5-17/1]-ND[6,8,10,12]
SFEU20-[25-1398/1]-F[2-68/1]-P[5-17/1]-NSC[8,10,12,14]
SFEU25-[25-1398/1]-F[2-88/1]-P[6-22/1]-N[4,5,6,8,10,12,16]
SFEU25-[25-1398/1]-F[2-88/1]-P[6-22/1]-ND[6,8,10,12,16]
SFEU25-[25-1398/1]-F[2-88/1]-P[6-22/1]-NSC[8,10,12,14,18]
SFEU30-[25-1498/1]-F[2-108/1]-P[6-27/1]-N[6,8,10,12,16,20]
SFEU30-[25-1498/1]-F[2-108/1]-P[6-27/1]-ND[6,8,10,12,16,20]
SFEU30-[25-1498/1]-F[2-108/1]-P[6-27/1]-NSC[8,10,12,14,18]
SFEU35-[25-1498/1]-F[2-128/1]-P[9-32/1]-N[8,10,12,16,20,24]
SFEU35-[25-1498/1]-F[2-128/1]-P[9-32/1]-NSC[8,10,12,14,18]
SFEU40-[25-1498/1]-F[2-148/1]-P[11-37/1]-N[10,12,16,20,24,30]
SFEU40-[25-1498/1]-F[2-148/1]-P[11-37/1]-NSC[10,12,14,18]
SFEU50-[25-1498/1]-F[2-188/1]-P[11-47/1]-N[12,16,20,24,30]
SFEU50-[25-1498/1]-F[2-188/1]-P[11-47/1]-NSC[12,14,18]
SFUE8-[25-1098/1]-F[2-24/1]-P6-M3-N[3,4,5]
SFUE10-[25-1198/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-N[3,4,5,6]
SFUE12-[25-1398/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-N[3,4,5,6,8]
SFUE12-[25-1398/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-ND6
SFUE12-[25-1398/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-NSC8
SFUE12-[25-1398/1]-F[2-40/1]-P[6-10/1]-MD6-N[3,4,5,6,8]
SFUE12-[25-1398/1]-F[2-40/1]-P[6-10/1]-MD6-ND6
SFUE12-[25-1398/1]-F[2-40/1]-P[6-10/1]-MD6-NSC8
SFUE13-[25-1398/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-N[3,4,5,6,8]
SFUE13-[25-1398/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-ND[6,8]
SFUE13-[25-1398/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-NSC8
SFUE13-[25-1398/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-N[3,4,5,6,8]
SFUE13-[25-1398/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-ND[6,8]
SFUE13-[25-1398/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-NSC8
SFUE15-[25-1398/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-N[3,4,5,6,8,10]
SFUE15-[25-1398/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-ND[6,8,10]
SFUE15-[25-1398/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-NSC[8,10]
SFUE15-[25-1398/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-N[3,4,5,6,8,10]
SFUE15-[25-1398/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-ND[6,8,10]
SFUE15-[25-1398/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-NSC[8,10]
SFUE16-[25-1398/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-N[4,5,6,8,10]
SFUE16-[25-1398/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-ND[6,8,10]
SFUE16-[25-1398/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-NSC[8,10]
SFUE16-[25-1398/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10]-N[4,5,6,8,10]
SFUE16-[25-1398/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10]-ND[6,8,10]
SFUE16-[25-1398/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10]-NSC[8,10]
SFUE18-[25-1398/1]-F[2-60/1]-P[7-16/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]
SFUE18-[25-1398/1]-F[2-60/1]-P[7-16/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]
SFUE18-[25-1398/1]-F[2-60/1]-P[7-16/1]-M[4,5,6,8,10,12]-NSC[8,10,12]
SFUE18-[25-1398/1]-F[2-60/1]-P[7-16/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]
SFUE18-[25-1398/1]-F[2-60/1]-P[7-16/1]-MD[6,8,10,12]-ND[6,8,10,12]
SFUE18-[25-1398/1]-F[2-60/1]-P[7-16/1]-MD[6,8,10,12]-NSC[8,10,12]
SFUE20-[25-1398/1]-F[2-68/1]-P[7-17/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]
SFUE20-[25-1398/1]-F[2-68/1]-P[7-17/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]
SFUE20-[25-1398/1]-F[2-68/1]-P[7-17/1]-M[4,5,6,8,10,12]-NSC[8,10,12,14]
SFUE20-[25-1398/1]-F[2-68/1]-P[7-17/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]
SFUE20-[25-1398/1]-F[2-68/1]-P[7-17/1]-MD[6,8,10,12]-ND[6,8,10,12]
SFUE20-[25-1398/1]-F[2-68/1]-P[7-17/1]-MD[6,8,10,12]-NSC[8,10,12,14]
SFUE25-[25-1398/1]-F[2-88/1]-P[7-22/1]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16]
SFUE25-[25-1398/1]-F[2-88/1]-P[7-22/1]-M[4,5,6,8,10,12,16]-ND[6,8,10,12,16]
SFUE25-[25-1398/1]-F[2-88/1]-P[7-22/1]-M[4,5,6,8,10,12,16]-NSC[8,10,12,14,18]
SFUE25-[25-1398/1]-F[2-88/1]-P[7-22/1]-MD[6,8,10,12,16]-N[4,5,6,8,10,12,16]
SFUE25-[25-1398/1]-F[2-88/1]-P[7-22/1]-MD[6,8,10,12,16]-ND[6,8,10,12,16]
SFUE25-[25-1398/1]-F[2-88/1]-P[7-22/1]-MD[6,8,10,12,16]-NSC[8,10,12,14,18]
SFUE30-[25-1498/1]-F[2-108/1]-P[8-27/1]-M[5,6,8,10,12,16,20,24]-N[6,8,10,12,16,20]
SFUE30-[25-1498/1]-F[2-108/1]-P[8-27/1]-M[5,6,8,10,12,16,20,24]-ND[6,8,10,12,16,20]
SFUE30-[25-1498/1]-F[2-108/1]-P[8-27/1]-M[5,6,8,10,12,16,20,24]-NSC[8,10,12,14,18]
SFUE30-[25-1498/1]-F[2-108/1]-P[8-27/1]-MD[6,8,10,12,16,20]-N[6,8,10,12,16,20]
SFUE30-[25-1498/1]-F[2-108/1]-P[8-27/1]-MD[6,8,10,12,16,20]-ND[6,8,10,12,16,20]
SFUE30-[25-1498/1]-F[2-108/1]-P[8-27/1]-MD[6,8,10,12,16,20]-NSC[8,10,12,14,18]
SFUE35-[25-1498/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24]-N[8,10,12,16,20,24]
SFUE35-[25-1498/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24]-NSC[8,10,12,14,18]
SFUE40-[25-1498/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30]-N[10,12,16,20,24,30]
SFUE40-[25-1498/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30]-NSC[10,12,14,18]
SFUE50-[25-1498/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30]-N[12,16,20,24,30]
SFUE50-[25-1498/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30]-NSC[12,14,18]
SSFEU8-[25-1098/1]-F[2-24/1]-P[3-6/1]-N[3,4,5]
SSFEU10-[25-1198/1]-F[2-32/1]-P[3-8/1]-N[3,4,5,6]
SSFEU12-[25-1398/1]-F[2-40/1]-P[3-10/1]-N[3,4,5,6,8]
SSFEU12-[25-1398/1]-F[2-40/1]-P[3-10/1]-ND6
SSFEU12-[25-1398/1]-F[2-40/1]-P[3-10/1]-NSC8
SSFEU13-[25-1398/1]-F[2-44/1]-P[4-11/1]-N[3,4,5,6,8]

Price	Minimum Order Qty.	Days to Ship	RoHS	End Shape (Left)	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Change Tapped Thread N to Fine One [NSC] (mm)	F (mm)	P (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] (mm)
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (58HRC~)	8	2 ～ 40	3 ～ 10	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 44	4 ～ 11	-	3 ～ 8	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 44	4 ～ 11	-	-	-	6 ～ 8
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (58HRC~)	8	2 ～ 44	4 ～ 11	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 52	4 ～ 13	-	3 ～ 10	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 52	4 ～ 13	-	-	-	6 ～ 10
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 10	2 ～ 52	4 ～ 13	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 56	4 ～ 14	-	4 ～ 10	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 56	4 ～ 14	-	-	-	6 ～ 10
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 10	2 ～ 56	4 ～ 14	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 60	5 ～ 16	-	4 ～ 12	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 60	5 ～ 16	-	-	-	6 ～ 12
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 12	2 ～ 60	5 ～ 16	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 68	5 ～ 17	-	4 ～ 12	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 68	5 ～ 17	-	-	-	6 ～ 12
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 14	2 ～ 68	5 ～ 17	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 88	6 ～ 22	-	4 ～ 16	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 88	6 ～ 22	-	-	-	6 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 18	2 ～ 88	6 ～ 22	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	h5	Induction Hardened (58HRC~)	-	2 ～ 108	6 ～ 27	-	6 ～ 20	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	h5	Induction Hardened (58HRC~)	-	2 ～ 108	6 ～ 27	-	-	-	6 ～ 20
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	h5	Induction Hardened (58HRC~)	8 ～ 18	2 ～ 108	6 ～ 27	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1498	h5	Induction Hardened (58HRC~)	-	2 ～ 128	9 ～ 32	-	8 ～ 24	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1498	h5	Induction Hardened (58HRC~)	8 ～ 18	2 ～ 128	9 ～ 32	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1498	h5	Induction Hardened (58HRC~)	-	2 ～ 148	11 ～ 37	-	10 ～ 30	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1498	h5	Induction Hardened (58HRC~)	10 ～ 18	2 ～ 148	11 ～ 37	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1498	h5	Induction Hardened (58HRC~)	-	2 ～ 188	11 ～ 47	-	12 ～ 30	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1498	h5	Induction Hardened (58HRC~)	12 ～ 18	2 ～ 188	11 ～ 47	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 1098	h5	Induction Hardened (58HRC~)	-	2 ～ 24	6	3	3 ～ 5	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 1198	h5	Induction Hardened (58HRC~)	-	2 ～ 32	6 ～ 8	3 ～ 5	3 ～ 6	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 40	6 ～ 10	3 ～ 6	3 ～ 8	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 40	6 ～ 10	3 ～ 6	-	-	6
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (58HRC~)	8	2 ～ 40	6 ～ 10	3 ～ 6	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 40	6 ～ 10	-	3 ～ 8	6	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 40	6 ～ 10	-	-	6	6
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (58HRC~)	8	2 ～ 40	6 ～ 10	-	-	6	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 44	6 ～ 11	3 ～ 8	3 ～ 8	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 44	6 ～ 11	3 ～ 8	-	-	6 ～ 8
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (58HRC~)	8	2 ～ 44	6 ～ 11	3 ～ 8	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 44	6 ～ 11	-	3 ～ 8	6 ～ 8	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 44	6 ～ 11	-	-	6 ～ 8	6 ～ 8
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (58HRC~)	8	2 ～ 44	6 ～ 11	-	-	6 ～ 8	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 52	6 ～ 13	3 ～ 10	3 ～ 10	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 52	6 ～ 13	3 ～ 10	-	-	6 ～ 10
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 10	2 ～ 52	6 ～ 13	3 ～ 10	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 52	6 ～ 13	-	3 ～ 10	6 ～ 10	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 52	6 ～ 13	-	-	6 ～ 10	6 ～ 10
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 10	2 ～ 52	6 ～ 13	-	-	6 ～ 10	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 56	6 ～ 14	3 ～ 10	4 ～ 10	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 56	6 ～ 14	3 ～ 10	-	-	6 ～ 10
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 10	2 ～ 56	6 ～ 14	3 ～ 10	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 56	6 ～ 14	-	4 ～ 10	6 ～ 10	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 56	6 ～ 14	-	-	6 ～ 10	6 ～ 10
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 10	2 ～ 56	6 ～ 14	-	-	6 ～ 10	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 60	7 ～ 16	4 ～ 12	4 ～ 12	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 60	7 ～ 16	4 ～ 12	-	-	6 ～ 12
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 12	2 ～ 60	7 ～ 16	4 ～ 12	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 60	7 ～ 16	-	4 ～ 12	6 ～ 12	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 60	7 ～ 16	-	-	6 ～ 12	6 ～ 12
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	18	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 12	2 ～ 60	7 ～ 16	-	-	6 ～ 12	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 68	7 ～ 17	4 ～ 12	4 ～ 12	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 68	7 ～ 17	4 ～ 12	-	-	6 ～ 12
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 14	2 ～ 68	7 ～ 17	4 ～ 12	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 68	7 ～ 17	-	4 ～ 12	6 ～ 12	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 68	7 ～ 17	-	-	6 ～ 12	6 ～ 12
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 14	2 ～ 68	7 ～ 17	-	-	6 ～ 12	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 88	7 ～ 22	4 ～ 16	4 ～ 16	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 88	7 ～ 22	4 ～ 16	-	-	6 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 18	2 ～ 88	7 ～ 22	4 ～ 16	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 88	7 ～ 22	-	4 ～ 16	6 ～ 16	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1398	h5	Induction Hardened (58HRC~)	-	2 ～ 88	7 ～ 22	-	-	6 ～ 16	6 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1398	h5	Induction Hardened (58HRC~)	8 ～ 18	2 ～ 88	7 ～ 22	-	-	6 ～ 16	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	h5	Induction Hardened (58HRC~)	-	2 ～ 108	8 ～ 27	5 ～ 24	6 ～ 20	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	h5	Induction Hardened (58HRC~)	-	2 ～ 108	8 ～ 27	5 ～ 24	-	-	6 ～ 20
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	h5	Induction Hardened (58HRC~)	8 ～ 18	2 ～ 108	8 ～ 27	5 ～ 24	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	h5	Induction Hardened (58HRC~)	-	2 ～ 108	8 ～ 27	-	6 ～ 20	6 ～ 20	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	h5	Induction Hardened (58HRC~)	-	2 ～ 108	8 ～ 27	-	-	6 ～ 20	6 ～ 20
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	h5	Induction Hardened (58HRC~)	8 ～ 18	2 ～ 108	8 ～ 27	-	-	6 ～ 20	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1498	h5	Induction Hardened (58HRC~)	-	2 ～ 128	9 ～ 32	5 ～ 24	8 ～ 24	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	35	25 ～ 1498	h5	Induction Hardened (58HRC~)	8 ～ 18	2 ～ 128	9 ～ 32	5 ～ 24	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1498	h5	Induction Hardened (58HRC~)	-	2 ～ 148	11 ～ 37	6 ～ 30	10 ～ 30	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	40	25 ～ 1498	h5	Induction Hardened (58HRC~)	10 ～ 18	2 ～ 148	11 ～ 37	6 ～ 30	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1498	h5	Induction Hardened (58HRC~)	-	2 ～ 188	11 ～ 47	6 ～ 30	12 ～ 30	-	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Not Provided	50	25 ～ 1498	h5	Induction Hardened (58HRC~)	12 ～ 18	2 ～ 188	11 ～ 47	6 ～ 30	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 1098	h5	Induction Hardened (56HRC~)	-	2 ～ 24	3 ～ 6	-	3 ～ 5	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 1198	h5	Induction Hardened (56HRC~)	-	2 ～ 32	3 ～ 8	-	3 ～ 6	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (56HRC~)	-	2 ～ 40	3 ～ 10	-	3 ～ 8	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (56HRC~)	-	2 ～ 40	3 ～ 10	-	-	-	6
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 1398	h5	Induction Hardened (56HRC~)	8	2 ～ 40	3 ～ 10	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 1398	h5	Induction Hardened (56HRC~)	-	2 ～ 44	4 ～ 11	-	3 ～ 8	-	-

Price list

Part Number		Unit Price
Type	D	Min. L ~ 50	L51 ~ 100	L101 ~ 150	L151 ~ 200	L201 ~ 250	L251 ~ 300	L301 ~ 350	L351 ~ 400	L401 ~ 450	L451 ~ 500	L501 ~ 550	L551 ~ 600	L601 ~ 650	L651 ~ 700	L701 ~ 750	L751 ~ 800	L801 ~ 850	L851 ~ 900	L901 ~ 950	L951 ~ 1000	L1001 ~ 1100	L1101 ~ 1200	L1201 ~ 1300	L1301 ~ 1400	L1401 ~ 1498
SFAA [ ! ]SFUE [ ! ]SFNA [ ! ]SFEU	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50
SSFAA [ ! ]SSFUE [ ! ]SSFNA [ ! ]SSFEU	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50
PSFAA [ ! ]PSFUE [ ! ]PSFNA [ ! ]PSFEU	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50
PSSFAA [ ! ]PSSFUE [ ! ]PSSFNA [ ! ]PSSFEU	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50

• One End Stepped, Both Ends Tapped
[ ! ]For D tolerance h5, add the relevant surcharge to the prices above.

• One End Stepped, One End Tapped
[ ! ]For D tolerance h5, add the relevant surcharge to the prices above.
[ ! ]For D tolerance g6, subtract the relevant charge from the prices above.

Part Number		Unit Price
Type	D	Min. L ~ 50	L51 ~ 100	L101 ~ 150	L151 ~ 200	L201 ~ 300	L301 ~ 400	L401 ~ 500
RSFAA [ ! ]RSFNA	8
	10
	12
	13
	15
	16
	18
	20
	25
	30

[ ! ]For One End Stepped One End Tapped Shafts, subtract the relevant charge from the prices above.

Part Number		Unit Price
Type	D	Min. L ~ 100	L101 ~ 200	L201 ~ 400	L401 ~ 600	L601 ~ 800	L801 ~ 1000	L1001 ~ 1200	L1201 ~ 1498
PSFGA [ ! ]PSNGA	8						-	-	-
	10						-	-	-
	12							-	-
	13							-	-
	15 • 16								-
	18 • 20								-
	25								-
	30
	35
	40
	50

[ ! ]For One End Stepped One End Tapped Shafts, subtract the relevant charge from the prices above.

Part Number		Unit Price
Type	D	Min. L ~ 100	L101 ~ 200	L201 ~ 400	L401 ~ 600	L601 ~ 800	L801 ~ 1000	L1001 ~ 1200	L1201 ~ 1498
PSSFGA [ ! ]PSSNGA	8						-	-	-
	10						-	-	-
	12							-	-
	13							-	-
	15 • 16								-
	18 • 20								-
	25								-
	30
	35
	40
	50

[ ! ]For One End Stepped One End Tapped Shafts, subtract the relevant charge from the prices above.

Product TOP

Basic Information

Basic Shape	One End Stepped	End Shape (Right)	Tapped	Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?

Configure

Specification/Dimensions

End Shape (Left)

Material

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Hardness

Change Tapped Thread N to Fine One [NSC](mm)

F(mm)

P(mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)

type

Shaft Fit Tolerance

CAD

Days to Ship

Specify Alterations

Linear Shafts-One End Stepped, Both Ends Female Thread- (Part Number)

Copy Part Number URL to Clipboard

(i) Caution

Product Description

Specifications

Alterations

Part Number

Price list

Basic Information

Payment Method

Customer Service

My Account

About MISUMI

Related Sites

Social Media

MISUMI India Contact

Customer Service

日本語でのお問い合わせはジャパンデスクまで

(i)
Caution