Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(136 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

PSFUH8-[25-1096/1]-F[2-24/1]-P6-M3-T[2-24/1]

End Shape (Left) End Shape (Right) Material Heat Treatment Surface Treatment Shaft Dia. D Length L Hardness F P T Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] type Shaft Fit Tolerance CAD Days to Ship

Specification/Dimensions

End Shape (Left)
- No Machining
- Tapped
Clear
End Shape (Right)
- No Machining
- Tapped
Clear
Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1496/1mm Unit(s)]
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
F(mm)
[2-188/1mm Unit(s)]
Clear
P(mm)
6
[3-47/1mm Unit(s)]
Clear
T(mm)
[2-188/1mm Unit(s)]
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
type
- PSFAH
- PSFAJ
- PSFGH
- PSFGJ
- PSFUH
- PSFUJ
- PSSFAH
- PSSFAJ
- PSSFGH
- PSSFGJ
- PSSFUH
- PSSFUJ
- RSFAH
- RSFAJ
- SFAH
- SFAJ
- SFUH
- SFUJ
- SSFAH
- SSFAJ
- SSFUH
- SSFUJ
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

8 Day(s) or Less

13 Day(s) or Less
Clear

Specify Alterations

Linear Shafts-Both Ends Stepped and Female Thread-

Name: Linear Shafts-Both Ends Stepped and Female Thread-
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

PSFUH8-[25-1096/1]-F[2-24/1]-P6-M3-T[2-24/1]

PSFUH10-[25-1196/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-32/1]

PSFUH12-[25-1396/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-40/1]

PSFUH12-[25-1396/1]-F[2-40/1]-P[6-10/1]-MD6-T[2-40/1]

PSFUH13-[25-1396/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-44/1]

PSFUH13-[25-1396/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-T[2-44/1]

PSFUH15-[25-1396/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-T[2-52/1]

PSFUH15-[25-1396/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-T[2-52/1]

PSFUH16-[25-1396/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-56/1]

PSFUH16-[25-1396/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10]-T[2-56/1]

PSFUH18-[25-1396/1]-F[2-64/1]-P[7-16/1]-M[4,5,6,8,10,12]-T[2-64/1]

PSFUH18-[25-1396/1]-F[2-64/1]-P[7-16/1]-MD[6,8,10,12]-T[2-64/1]

PSFUH20-[25-1396/1]-F[2-68/1]-P[7-17/1]-M[4,5,6,8,10,12]-T[2-68/1]

PSFUH20-[25-1396/1]-F[2-68/1]-P[7-17/1]-MD[6,8,10,12]-T[2-68/1]

PSFUH25-[25-1396/1]-F[2-88/1]-P[7-22/1]-M[4,5,6,8,10,12,16]-T[2-88/1]

PSFUH25-[25-1396/1]-F[2-88/1]-P[7-22/1]-MD[6,8,10,12,16]-T[2-88/1]

PSFUH30-[25-1496/1]-F[2-108/1]-P[8-27/1]-M[5,6,8,10,12,16,20,24]-T[2-108/1]

PSFUH30-[25-1496/1]-F[2-108/1]-P[8-27/1]-MD[6,8,10,12,16,20]-T[2-108/1]

PSFUH35-[25-1496/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24]-T[2-128/1]

PSFUH40-[25-1496/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30]-T[2-148/1]

PSFUH8-[25-1096/1]-F[2-24/1]-P6-M3-T[2-24/1]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

Please check the content on our website as the PDF does not contain the most up-to-date information.

Product Description

[Features] A stepped female thread on both ends/a stepped shaft on both ends (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

Linear Shafts-One End Male Thread with Thread Dia. Equal to Shaft Dia.-:Related Image

Type						[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
Both Ends Stepped and Tapped			Both Ends Stepped
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. h5	D Tol. f8
SFAH	SFUH	-	SFAJ	SFUJ	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent 58HRC~ SUS440C or 13Cr stainless 56HRC~	-
SSFAH	SSFUH	-	SSFAJ	SSFUJ	-	SUS440C or 13Cr stainless		-
PSFAH	PSFUH	-	PSFAJ	PSFUJ	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFAH	PSSFUH	-	PSSFAJ	PSSFUJ	-	SUS440C or 13Cr stainless
RSFAH	-	-	RSFAJ	-	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGH	-	-	PSFGJ	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSFGH	-	-	PSSFGJ	SUS304	-

D Tol.
D	g6	h5	f8
8	-0.005 -0.014	0 -0.006	-0.013 -0.035
10
12	-0.006 -0.017	0 -0.008	-0.016 -0.043
13
15
16
18
20	-0.007 -0.020	0 -0.009	-0.020 -0.053
25
30
35	-0.009 -0.025	0 -0.011	-0.025 -0.064
40
50

Specifications

Part Number	-	L	-	F	-	P	-	M	-	T
SSFAH18 SFAH20 SFAJ20	- - -	200 400 400	- - -	F20 F25 F25	- - -	P15 P16 P16	- -	M8 M10	- - -	T20 T20 T20

Part Number					1mm Increments			M (Coarse) Selection											(Y)Max.	R	C
Type				D	L	F, T	P	M (Coarse) Selection											(Y)Max.	R	C
Both Ends Stepped and Tapped		Both Ends Stepped		8	25~ 996	2≤F≤Px4 2≤T≤Px4	6	3											800	0.3 or Less	0.5 or Less
(D Tol. g6)	(D Tol. h5)	(D Tol. g6)	(D Tol. h5)	10	25~ 996		6 ~ 8	3	4	5									800
SFAH SSFAH PSFAH PSSFAH RSFAH (D≤30, L≤500) (D Tol. f8) PSFGH PSSFGH	SFUH SSFUH PSFUH PSSFUH	SFAJ SSFAJ PSFAJ PSSFAJ RSFAJ (D≤30, L≤500) (D Tol. f8) PSFGJ PSSFGJ	SFUJ SSFUJ PSFUJ PSSFUJ	12	25~1196		6~10	3	4	5	6								1000
				13	25~1196		6~11	3	4	5	6	8							1000
				15	25~1196		6~13	3	4	5	6	8	10						1000
				16	25~1196		6~14	3	4	5	6	8	10						1200
				18	25~1196		8~16		4	5	6	8	10	12					1200
				20	25~1196		8~17		4	5	6	8	10	12					1200		1.0 or Less
				25	25~1196		8~22		4	5	6	8	10	12	16				1200
				30	25~1496		9~27			5	6	8	10	12	16	20	24		1500
				35	25~1496		9~32			5	6	8	10	12	16	20	24		1500	0.5 or Less
				40	25~1496		11~37				6	8	10	12	16	20	24	30	1500
				50	25~1496		11~47				6	8	10	12	16	20	24	30	1500

• Both Ends Tapped [ ! ]P dimensions require M+3≤P. [ ! ]When (Mx2.5+4)x2≥(Y), tap pilot hole may go through and the effective length of the smaller tap part may be shortened.

Alterations

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
PSFUH8-[25-1096/1]-F[2-24/1]-P6-M3-T[2-24/1]
PSFUH10-[25-1196/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-32/1]
PSFUH12-[25-1396/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-40/1]
PSFUH12-[25-1396/1]-F[2-40/1]-P[6-10/1]-MD6-T[2-40/1]
PSFUH13-[25-1396/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-44/1]
PSFUH13-[25-1396/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-T[2-44/1]
PSFUH15-[25-1396/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-T[2-52/1]
PSFUH15-[25-1396/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-T[2-52/1]
PSFUH16-[25-1396/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-56/1]
PSFUH16-[25-1396/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10]-T[2-56/1]
PSFUH18-[25-1396/1]-F[2-64/1]-P[7-16/1]-M[4,5,6,8,10,12]-T[2-64/1]
PSFUH18-[25-1396/1]-F[2-64/1]-P[7-16/1]-MD[6,8,10,12]-T[2-64/1]
PSFUH20-[25-1396/1]-F[2-68/1]-P[7-17/1]-M[4,5,6,8,10,12]-T[2-68/1]
PSFUH20-[25-1396/1]-F[2-68/1]-P[7-17/1]-MD[6,8,10,12]-T[2-68/1]
PSFUH25-[25-1396/1]-F[2-88/1]-P[7-22/1]-M[4,5,6,8,10,12,16]-T[2-88/1]
PSFUH25-[25-1396/1]-F[2-88/1]-P[7-22/1]-MD[6,8,10,12,16]-T[2-88/1]
PSFUH30-[25-1496/1]-F[2-108/1]-P[8-27/1]-M[5,6,8,10,12,16,20,24]-T[2-108/1]
PSFUH30-[25-1496/1]-F[2-108/1]-P[8-27/1]-MD[6,8,10,12,16,20]-T[2-108/1]
PSFUH35-[25-1496/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24]-T[2-128/1]
PSFUH40-[25-1496/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30]-T[2-148/1]
PSFUH50-[25-1496/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30]-T[2-188/1]
PSFUJ8-[25-1096/1]-F[2-24/1]-P[3-6/1]-T[2-24/1]
PSFUJ10-[25-1196/1]-F[2-32/1]-P[3-8/1]-T[2-32/1]
PSFUJ12-[25-1396/1]-F[2-40/1]-P[3-10/1]-T[2-40/1]
PSFUJ13-[25-1396/1]-F[2-44/1]-P[4-11/1]-T[2-44/1]
PSFUJ15-[25-1396/1]-F[2-52/1]-P[4-13/1]-T[2-52/1]
PSFUJ16-[25-1396/1]-F[2-56/1]-P[4-14/1]-T[2-56/1]
PSFUJ18-[25-1396/1]-F[2-64/1]-P[5-16/1]-T[2-64/1]
PSFUJ20-[25-1396/1]-F[2-68/1]-P[5-17/1]-T[2-68/1]
PSFUJ25-[25-1396/1]-F[2-88/1]-P[6-22/1]-T[2-88/1]
PSFUJ30-[25-1496/1]-F[2-108/1]-P[6-27/1]-T[2-108/1]
PSFUJ35-[25-1496/1]-F[2-128/1]-P[9-32/1]-T[2-128/1]
PSFUJ40-[25-1496/1]-F[2-148/1]-P[11-37/1]-T[2-148/1]
PSFUJ50-[25-1496/1]-F[2-188/1]-P[11-47/1]-T[2-188/1]
PSSFUH8-[25-1096/1]-F[2-24/1]-P6-M3-T[2-24/1]
PSSFUH10-[25-1196/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-T[2-32/1]
PSSFUH12-[25-1396/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-T[2-40/1]
PSSFUH12-[25-1396/1]-F[2-40/1]-P[6-10/1]-MD6-T[2-40/1]
PSSFUH13-[25-1396/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-T[2-44/1]
PSSFUH13-[25-1396/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-T[2-44/1]
PSSFUH15-[25-1396/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-T[2-52/1]
PSSFUH15-[25-1396/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-T[2-52/1]
PSSFUH16-[25-1396/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-T[2-56/1]
PSSFUH16-[25-1396/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10]-T[2-56/1]
PSSFUH18-[25-1396/1]-F[2-64/1]-P[7-16/1]-M[4,5,6,8,10,12]-T[2-64/1]
PSSFUH18-[25-1396/1]-F[2-64/1]-P[7-16/1]-MD[6,8,10,12]-T[2-64/1]
PSSFUH20-[25-1396/1]-F[2-68/1]-P[7-17/1]-M[4,5,6,8,10,12]-T[2-68/1]
PSSFUH20-[25-1396/1]-F[2-68/1]-P[7-17/1]-MD[6,8,10,12]-T[2-68/1]
PSSFUH25-[25-1396/1]-F[2-88/1]-P[7-22/1]-M[4,5,6,8,10,12,16]-T[2-88/1]
PSSFUH25-[25-1396/1]-F[2-88/1]-P[7-22/1]-MD[6,8,10,12,16]-T[2-88/1]
PSSFUH30-[25-1496/1]-F[2-108/1]-P[8-27/1]-M[5,6,8,10,12,16,20,24]-T[2-108/1]
PSSFUH30-[25-1496/1]-F[2-108/1]-P[8-27/1]-MD[6,8,10,12,16,20]-T[2-108/1]
PSSFUH35-[25-1496/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24]-T[2-128/1]
PSSFUH40-[25-1496/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30]-T[2-148/1]
PSSFUH50-[25-1496/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30]-T[2-188/1]
PSSFUJ8-[25-1096/1]-F[2-24/1]-P[3-6/1]-T[2-24/1]
PSSFUJ10-[25-1196/1]-F[2-32/1]-P[3-8/1]-T[2-32/1]
PSSFUJ12-[25-1396/1]-F[2-40/1]-P[3-10/1]-T[2-40/1]
PSSFUJ13-[25-1396/1]-F[2-44/1]-P[4-11/1]-T[2-44/1]
PSSFUJ15-[25-1396/1]-F[2-52/1]-P[4-13/1]-T[2-52/1]

Price	Minimum Order Qty.	Days to Ship	RoHS	End Shape (Left)	End Shape (Right)	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	F (mm)	P (mm)	T (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] (mm)
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 1096	h5	Induction Hardened (58HRC~)	2 ～ 24	6	2 ～ 24	3
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 1196	h5	Induction Hardened (58HRC~)	2 ～ 32	6 ～ 8	2 ～ 32	3 ～ 5
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 40	6 ～ 10	2 ～ 40	3 ～ 6
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 40	6 ～ 10	2 ～ 40	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 44	6 ～ 11	2 ～ 44	3 ～ 8
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 44	6 ～ 11	2 ～ 44	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 52	6 ～ 13	2 ～ 52	3 ～ 10
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 52	6 ～ 13	2 ～ 52	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 56	6 ～ 14	2 ～ 56	3 ～ 10
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 56	6 ～ 14	2 ～ 56	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 64	7 ～ 16	2 ～ 64	4 ～ 12
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 64	7 ～ 16	2 ～ 64	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 68	7 ～ 17	2 ～ 68	4 ～ 12
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 68	7 ～ 17	2 ～ 68	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 88	7 ～ 22	2 ～ 88	4 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 88	7 ～ 22	2 ～ 88	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1496	h5	Induction Hardened (58HRC~)	2 ～ 108	8 ～ 27	2 ～ 108	5 ～ 24
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1496	h5	Induction Hardened (58HRC~)	2 ～ 108	8 ～ 27	2 ～ 108	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	35	25 ～ 1496	h5	Induction Hardened (58HRC~)	2 ～ 128	9 ～ 32	2 ～ 128	5 ～ 24
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	40	25 ～ 1496	h5	Induction Hardened (58HRC~)	2 ～ 148	11 ～ 37	2 ～ 148	6 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	50	25 ～ 1496	h5	Induction Hardened (58HRC~)	2 ～ 188	11 ～ 47	2 ～ 188	6 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 1096	h5	Induction Hardened (58HRC~)	2 ～ 24	3 ～ 6	2 ～ 24	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 1196	h5	Induction Hardened (58HRC~)	2 ～ 32	3 ～ 8	2 ～ 32	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 40	3 ～ 10	2 ～ 40	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 44	4 ～ 11	2 ～ 44	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 52	4 ～ 13	2 ～ 52	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 56	4 ～ 14	2 ～ 56	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 64	5 ～ 16	2 ～ 64	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 68	5 ～ 17	2 ～ 68	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1396	h5	Induction Hardened (58HRC~)	2 ～ 88	6 ～ 22	2 ～ 88	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1496	h5	Induction Hardened (58HRC~)	2 ～ 108	6 ～ 27	2 ～ 108	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	35	25 ～ 1496	h5	Induction Hardened (58HRC~)	2 ～ 128	9 ～ 32	2 ～ 128	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	40	25 ～ 1496	h5	Induction Hardened (58HRC~)	2 ～ 148	11 ～ 37	2 ～ 148	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	50	25 ～ 1496	h5	Induction Hardened (58HRC~)	2 ～ 188	11 ～ 47	2 ～ 188	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	8	25 ～ 1096	h5	Induction Hardened (56HRC~)	2 ～ 24	6	2 ～ 24	3
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	25 ～ 1196	h5	Induction Hardened (56HRC~)	2 ～ 32	6 ～ 8	2 ～ 32	3 ～ 5
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 40	6 ～ 10	2 ～ 40	3 ～ 6
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 40	6 ～ 10	2 ～ 40	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 44	6 ～ 11	2 ～ 44	3 ～ 8
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 44	6 ～ 11	2 ～ 44	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 52	6 ～ 13	2 ～ 52	3 ～ 10
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 52	6 ～ 13	2 ～ 52	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 56	6 ～ 14	2 ～ 56	3 ～ 10
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 56	6 ～ 14	2 ～ 56	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	18	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 64	7 ～ 16	2 ～ 64	4 ～ 12
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	18	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 64	7 ～ 16	2 ～ 64	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 68	7 ～ 17	2 ～ 68	4 ～ 12
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 68	7 ～ 17	2 ～ 68	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	25	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 88	7 ～ 22	2 ～ 88	4 ～ 16
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	25	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 88	7 ～ 22	2 ～ 88	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	30	25 ～ 1496	h5	Induction Hardened (56HRC~)	2 ～ 108	8 ～ 27	2 ～ 108	5 ～ 24
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	30	25 ～ 1496	h5	Induction Hardened (56HRC~)	2 ～ 108	8 ～ 27	2 ～ 108	-
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	35	25 ～ 1496	h5	Induction Hardened (56HRC~)	2 ～ 128	9 ～ 32	2 ～ 128	5 ～ 24
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	40	25 ～ 1496	h5	Induction Hardened (56HRC~)	2 ～ 148	11 ～ 37	2 ～ 148	6 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	50	25 ～ 1496	h5	Induction Hardened (56HRC~)	2 ～ 188	11 ～ 47	2 ～ 188	6 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	8	25 ～ 1096	h5	Induction Hardened (56HRC~)	2 ～ 24	3 ～ 6	2 ～ 24	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	25 ～ 1196	h5	Induction Hardened (56HRC~)	2 ～ 32	3 ～ 8	2 ～ 32	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 40	3 ～ 10	2 ～ 40	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 44	4 ～ 11	2 ～ 44	-
-	1 Piece(s)	8 Day(s) or more	10	No Machining	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 1396	h5	Induction Hardened (56HRC~)	2 ～ 52	4 ～ 13	2 ～ 52	-

Price list

Part Number		Unit Price
Type	D	Min. L ~ 50	L51 ~ 100	L101 ~ 150	L151 ~ 200	L201 ~ 250	L251 ~ 300	L301 ~ 350	L351 ~ 400	L401 ~ 450	L451 ~ 500	L501 ~ 550	L551 ~ 600	L601 ~ 650	L651 ~ 700	L701 ~ 750	L751 ~ 800	L801 ~ 850	L851 ~ 900	L901 ~ 950	L951 ~ 1000	L1001 ~ 1100	L1101 ~ 1200	L1201 ~ 1300	L1301 ~ 1400	L1401 ~ 1496
SFAH [ ! ]SFUH [ ! ]SFAJ [ ! ]SFUJ	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50
SSFAH [ ! ]SSFUH [ ! ]SSFAJ [ ! ]SSFUJ	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50
PSFAH [ ! ]PSFUH [ ! ]PSFAJ [ ! ]PSFUJ	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50
PSSFAH [ ! ]PSSFUH [ ! ]PSSFAJ [ ! ]PSSFUJ	8																					-	-	-	-	-
	10																					-	-	-	-	-
	12																							-	-	-
	13																							-	-	-
	15																							-	-	-
	16																							-	-	-
	18																							-	-	-
	20																							-	-	-
	25																							-	-	-
	30
	35
	40
	50

• Both Ends Stepped and Tapped
[ ! ]For D tolerance h5, add the relevant surcharge to the prices above.

Part Number		Unit Price
Type	D	Min. L ~ 50	L51 ~ 100	L101 ~ 150	L151 ~ 200	L201 ~ 300	L301 ~ 400	L401 ~ 500
RSFAH [ ! ]RSFAJ	8
	10
	12
	13
	15
	16
	18
	20
	25
	30

Part Number		Unit Price
Type	D	Min. L ~ 100	L101 ~ 200	L201 ~ 400	L401 ~ 600	L601 ~ 800	L801 ~ 1000	L1001 ~ 1200	L1201 ~ 1500
PSFGH [ ! ]PSFGJ	8, 10						-	-	-
	12, 13							-	-
	15, 16								-
	18, 20								-
	25								-
	30
	35
	40
	50

Part Number		Unit Price
Type	D	Min. L ~ 100	L101 ~ 200	L201 ~ 400	L401 ~ 600	L601 ~ 800	L801 ~ 1000	L1001 ~ 1200	L1201 ~ 1500
PSSFGH [ ! ]PSSFGJ	8, 10						-	-	-
	12, 13							-	-
	15, 16								-
	18, 20								-
	25								-
	30
	35
	40
	50

• Both Ends Stepped
[ ! ]For D tolerance h5, add the relevant surcharge to the prices above.
[ ! ]For D tolerance g6, subtract the relevant charge from the prices above.
[ ! ]For Both Ends Stepped Type, subtract the relevant charge from the prices above.
[ ! ]For Both Ends Stepped Type, subtract the relevant charge from the prices above.
[ ! ]For Both Ends Stepped Type, subtract the relevant charge from the prices above.

Product TOP

Basic Information

Basic Shape	Both Ends Stepped	Shaft End Perpendicularity	Perpendicularity (0.2)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Search by Category / Brand

Search by Category

How can we improve?