(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.

Tel. Tel: 0124-4688 800 Email: cs@misumi.co.in 9:00am - 5:30pm (Monday to Saturday)
Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
  • Viewed
    Products
  • My
    Components
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...
  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

  • How can we improve?

    How can we improve?

    Feedback
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    Thank you for your time.
    Your feedback is essential for our continuous improvement
    Privacy Policy

    Thank you for your cooperation.

    Thank you for your time.
    Your feedback is essential for our continuous improvement
    Please use the inquiry form.

    Privacy Policy

Configure

Clear All

Part number has not been determine

(10 Part Numbers Available)
Configure Remaining Specifications

Part Number Complete

CVDSA30-[50,100,150,200,250,300]-[500-3000/5]-40-NV-[IM,INVM,NM,SCM]-[7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-FS-[A,B,C,R]-[5-100/1]
loading

Specification/Dimensions

  • Belt Width/Belt Pitch B(mm)

    • 50
    • 100
    • 150
    • 200
    • 250
    • 300

    Clear

  • Conveyance Length

     [500-3000/5]

    Clear

  • Number of Guides(pc(s).)

     [5-100/1pc(s). Unit(s)]

    Clear

  • Belt Specifications

    • Belt for Food and Oil Resistance
    • Belt for Food and Oil Resistance, Green [HS]

    Clear

  • Gearhead Reduction Ratio

    • 7.5
    • 9
    • 12.5
    • 15
    • 18
    • 25
    • 30
    • 36
    • 50
    • 60
    • 75
    • 90
    • 100
    • 120
    • 150
    • 180
    • No Gear Heads [NH]

    Clear

  • Motor Manufacturer Selection

    • [B] Oriental Motor
    • [C] Motor made in Taiwan
    • [R] No Motor Gear Head

    Clear

  • Motor Output(W)

    • 40

    Clear

  • Motor Type

    • Induction Motor [IM]
    • No Motor [NM]
    • Variable Speed Motor [SCM]

    Clear

  • Motor Voltage (No Motor)

    • No Motor [NV]

    Clear

  • Motor Voltage S (3-Phase) * For Japan(V)

    • 200

    Clear

  • Motor Voltage SA (3-Phase) * International(V)

    • 200
    • 220
    • 230

    Clear

  • Motor Voltage T (Single Phase) * For Japan(V)

    • 100
    • 200

    Clear

  • Motor Voltage TA (Single Phase) * International(V)

    • 100
    • 110
    • 115
    • 200
    • 220
    • 230

    Clear

  • type

    • CVDSA
    • CVDSB

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 21 Day(s) or Less

    Clear

Specify Alterations

Flat Belt Conveyors - Guided, Head Drive, 3-Slot Frame (Pulley Dia. 50mm) (Part Number)

Flat Belt Conveyors - Guided, Head Drive, 3-Slot Frame (Pulley Dia. 50mm)

Click this image to zoom it.

Move the mouse over or click the image to zoom

You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MISUMI

Part Number :
10 Part Numbers Available

CVDSA30-[50,100,150,200,250,300]-[500-3000/5]-40-NV-[IM,INVM,NM,SCM]-[7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-FS-[A,B,C,R]-[5-100/1]

CVDSA30-[50,100,150,200,250,300]-[500-3000/5]-40-S200-[IM,INVM,NM,SCM]-[7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-FS-[A,B,C,R]-[5-100/1]

CVDSA30-[50,100,150,200,250,300]-[500-3000/5]-40-SA[200,220,230]-[IM,INVM,NM,SCM]-[7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-FS-[A,B,C,R]-[5-100/1]

CVDSA30-[50,100,150,200,250,300]-[500-3000/5]-40-T[100,200]-[IM,INVM,NM,SCM]-[7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-FS-[A,B,C,R]-[5-100/1]

CVDSA30-[50,100,150,200,250,300]-[500-3000/5]-40-TA[100,110,115,200,220,230]-[IM,INVM,NM,SCM]-[7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-FS-[A,B,C,R]-[5-100/1]

CVDSB30-[50,100,150,200,250,300]-[500-3000/5]-40-NV-[IM,INVM,NM,SCM]-[7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HS-[A,B,C,R]-[5-100/1]

CVDSB30-[50,100,150,200,250,300]-[500-3000/5]-40-S200-[IM,INVM,NM,SCM]-[7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HS-[A,B,C,R]-[5-100/1]

CVDSB30-[50,100,150,200,250,300]-[500-3000/5]-40-SA[200,220,230]-[IM,INVM,NM,SCM]-[7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HS-[A,B,C,R]-[5-100/1]

CVDSB30-[50,100,150,200,250,300]-[500-3000/5]-40-T[100,200]-[IM,INVM,NM,SCM]-[7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HS-[A,B,C,R]-[5-100/1]

CVDSB30-[50,100,150,200,250,300]-[500-3000/5]-40-TA[100,110,115,200,220,230]-[IM,INVM,NM,SCM]-[7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HS-[A,B,C,R]-[5-100/1]

CVDSA30-[50,100,150,200,250,300]-[500-3000/5]-40-NV-[IM,INVM,NM,SCM]-[7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-FS-[A,B,C,R]-[5-100/1]
CVDSA30-[50,100,150,200,250,300]-[500-3000/5]-40-NV-[IM,INVM,NM,SCM]-[7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-FS-[A,B,C,R]-[5-100/1]

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
  • Order Qty :
  • Price :
    ---
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

  • Orders suspended: CVDSA has been temporarily suspended, as the White Belt for Food (WS) has been discontinued. We are currently working on an alternative product.
  • Please check the content on our website as the PDF does not contain the most up-to-date information.

PDFP.1-1251-2014

CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

This conveyor is suitable for pitch conveyance and inclined conveyance of small workpieces, etc. *When the crosspiece thickness is CVDSB, it is 2mm.

 FrameMotor CoverPulley Holder
[ M ]MaterialAluminumAluminumAluminum
[ S ]Surface TreatmentClear AnodizePaintedPainted

Specifications

Part Number H-B-L-Motor-Belt Specification-Motor Manufacturer Selection-Number of Crosspieces
 
Output-Voltage-Specification-Gearhead
Reduction Ratio
CVDSA 30-100-1000-40-T100-IM-25-WS-C-10
          
Ex.) For Regular SpecificationsCVDSA30-100-1200-40-T100-IM-25-WS-C-17Body Price+Motor, Belt Spec. Price+Price for Welding Crosspieces=Unit Price
Ex.) For No Motor, GearheadCVDSA30-100-1000-40-NV-NM-NH-WS-R-10
Part NumberCrosspiece Height H
Selection		B
Selection		L
5mm Increment		MotorBelt SpecificationMotor Manufacturer Selection
[ ! ]The prices vary by manufacturer.		Number of Crosspieces
Specified in increments of 1
Output (W)Voltage (V)SpecificationGearhead Reduction Ratio
CVDSA
(Belt for Food, White)		3050
100
150
200
250
300		500~300040T100 (Single-phase)
T200 (Single-phase)		IM (Induction Motor)
SCM (Variable Speed Motor)		7.5
18
50
100		9
25
60
120		12.5
30
75
150		15
36
90
180		WS
(For Food, White)		A (Panasonic Motor)
B (Oriental Motor)
C (Taiwanese Motor)
*SCM (Variable Speed Motor) is not selectable for A.		5~100
* Number of crosspieces ≤ Perimeter (2L+160) / 50

[ ! ]Please note that the crosspiece pitch is automatically calculated by dividing the perimeter by the number of crosspieces.
S200 (3-Phase)IM (Induction Motor)
NV (No Motor)NM (No Motor)NH (No Gearhead)R (No Motor, Gearhead)
CVDSB
(Oil Resistant Belt for Food, Green)		3050
100
150
200
250
300		500~300040T100 (Single-phase)
T200 (Single-phase)		IM (Induction Motor)
SCM (Variable Speed Motor)		7.5
18
50
100		9
25
60
120		12.5
30
75
150		15
36
90
180		HS
(For Food and Oil Resistance, Green)		A (Panasonic Motor)
B (Oriental Motor)
C (Taiwanese Motor)
*SCM (Variable Speed Motor) is not selectable for A.		5~100
* Number of crosspieces ≤ Perimeter (2L+160)/50

[ ! ]Please note that the crosspiece pitch is automatically calculated by dividing the perimeter by the number of crosspieces.
S200 (3-Phase)IM (Induction Motor)
NV (No Motor)NM (No Motor)NH (No Gearhead)R (No Motor, Gearhead)
[ ! ]Connect the motor so that the belt rotates in the direction of conveyance. For connection diagram, and details of motor and inverter, see >>p1_1267 onward.
[ ! ]When "No motor, gearhead" is selected, the motor mounting hole pitch will vary depending on the motor's power rating. Please see Technical Information in our Conveyor Selection web site for the dimension details.
[ ! ]When "No motor, gearhead" is selected, this unit will be delivered unassembled. The customer is to assemble the unit according to the included assembly instructions. See our Conveyor Selection site for assembly procedures and packaging details.
[ ! ]Installation must be done by two or more persons. Make sure to perform meandering adjustments again when using it on a slope. Using it without readjustments may cause meandering, resulting in a breakage to the belt.
[ ! ]When the operation stops with a workpiece placed on the conveyor on a slope, the belt might rotate in reverse direction, which may cause the workpiece to fall. To avoid this, specify the motor with electromagnetic brake in alterations when using the conveyor on a slope. For details, see >>p1_1265.
[ ! ]Make sure to secure the stand with anchors when using the conveyor on a slope.
[ ! ]When using the conveyor on a slope, the gradient must not exceed 30°.
[ ! ]Belt may deflect up to about 50mm by its own weight.
* The pitch for crosspieces is automatically determined by the specified number of pitches. Please note that pitches with decimal part will be considered as target dimensions.

Alterations

Motor Position Reversed
Additional Counterbores
Post-Assembly Insertion Nuts Included
Motors with Electromagnetic Brake
Motor with Terminal Box
Stands (Legs)
Inclined Stand (Legs)
For details of alterations, see >>p1_1264 onward.

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
30
60
90
  1. 1
Part Number
CVDSA30-[50,​100,​150,​200,​250,​300]-[500-3000/5]-40-NV-[IM,​INVM,​NM,​SCM]-[7.5,​9,​12.5,​15,​18,​25,​30,​36,​50,​60,​75,​90,​100,​120,​150,​180,​NH]-FS-[A,​B,​C,​R]-[5-100/1]
CVDSA30-[50,​100,​150,​200,​250,​300]-[500-3000/5]-40-S200-[IM,​INVM,​NM,​SCM]-[7.5,​9,​12.5,​15,​18,​25,​30,​36,​50,​60,​75,​90,​100,​120,​150,​180,​NH]-FS-[A,​B,​C,​R]-[5-100/1]
CVDSA30-[50,​100,​150,​200,​250,​300]-[500-3000/5]-40-SA[200,​220,​230]-[IM,​INVM,​NM,​SCM]-[7.5,​9,​12.5,​15,​18,​25,​30,​36,​50,​60,​75,​90,​100,​120,​150,​180,​NH]-FS-[A,​B,​C,​R]-[5-100/1]
CVDSA30-[50,​100,​150,​200,​250,​300]-[500-3000/5]-40-T[100,​200]-[IM,​INVM,​NM,​SCM]-[7.5,​9,​12.5,​15,​18,​25,​30,​36,​50,​60,​75,​90,​100,​120,​150,​180,​NH]-FS-[A,​B,​C,​R]-[5-100/1]
CVDSA30-[50,​100,​150,​200,​250,​300]-[500-3000/5]-40-TA[100,​110,​115,​200,​220,​230]-[IM,​INVM,​NM,​SCM]-[7.5,​9,​12.5,​15,​18,​25,​30,​36,​50,​60,​75,​90,​100,​120,​150,​180,​NH]-FS-[A,​B,​C,​R]-[5-100/1]
CVDSB30-[50,​100,​150,​200,​250,​300]-[500-3000/5]-40-NV-[IM,​INVM,​NM,​SCM]-[7.5,​9,​12.5,​15,​18,​25,​30,​36,​50,​60,​75,​90,​100,​120,​150,​180,​NH]-HS-[A,​B,​C,​R]-[5-100/1]
CVDSB30-[50,​100,​150,​200,​250,​300]-[500-3000/5]-40-S200-[IM,​INVM,​NM,​SCM]-[7.5,​9,​12.5,​15,​18,​25,​30,​36,​50,​60,​75,​90,​100,​120,​150,​180,​NH]-HS-[A,​B,​C,​R]-[5-100/1]
CVDSB30-[50,​100,​150,​200,​250,​300]-[500-3000/5]-40-SA[200,​220,​230]-[IM,​INVM,​NM,​SCM]-[7.5,​9,​12.5,​15,​18,​25,​30,​36,​50,​60,​75,​90,​100,​120,​150,​180,​NH]-HS-[A,​B,​C,​R]-[5-100/1]
CVDSB30-[50,​100,​150,​200,​250,​300]-[500-3000/5]-40-T[100,​200]-[IM,​INVM,​NM,​SCM]-[7.5,​9,​12.5,​15,​18,​25,​30,​36,​50,​60,​75,​90,​100,​120,​150,​180,​NH]-HS-[A,​B,​C,​R]-[5-100/1]
CVDSB30-[50,​100,​150,​200,​250,​300]-[500-3000/5]-40-TA[100,​110,​115,​200,​220,​230]-[IM,​INVM,​NM,​SCM]-[7.5,​9,​12.5,​15,​18,​25,​30,​36,​50,​60,​75,​90,​100,​120,​150,​180,​NH]-HS-[A,​B,​C,​R]-[5-100/1]
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipBelt Width/Belt Pitch B
(mm) 		Conveyance Length Number of Guides
(pc(s).) 		Belt Specifications Gearhead Reduction Ratio Motor Manufacturer Selection Motor Output
(W) 		Motor Type Motor Voltage (No Motor) Motor Voltage S (3-Phase) * For Japan
(V) 		Motor Voltage SA (3-Phase) * International
(V) 		Motor Voltage T (Single Phase) * For Japan
(V) 		Motor Voltage TA (Single Phase) * International
(V)

-

1 Piece(s) 21 Day(s) or more 50 ～ 300500 ～ 30005 ～ 100-7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gear Heads [NH][B] Oriental Motor / [C] Motor made in Taiwan / [R] No Motor Gear Head40Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]No Motor [NV]----

-

1 Piece(s) 21 Day(s) or more 50 ～ 300500 ～ 30005 ～ 100-7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gear Heads [NH][B] Oriental Motor / [C] Motor made in Taiwan / [R] No Motor Gear Head40Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]-200---

-

1 Piece(s) 21 Day(s) or more 50 ～ 300500 ～ 30005 ～ 100-7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gear Heads [NH][B] Oriental Motor / [C] Motor made in Taiwan / [R] No Motor Gear Head40Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]--200 ～ 230--

-

1 Piece(s) 21 Day(s) or more 50 ～ 300500 ～ 30005 ～ 100-7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gear Heads [NH][B] Oriental Motor / [C] Motor made in Taiwan / [R] No Motor Gear Head40Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]---100 ～ 200-

-

1 Piece(s) 21 Day(s) or more 50 ～ 300500 ～ 30005 ～ 100-7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gear Heads [NH][B] Oriental Motor / [C] Motor made in Taiwan / [R] No Motor Gear Head40Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]----100 ～ 230

-

1 Piece(s) 21 Day(s) or more 50 ～ 300500 ～ 30005 ～ 100Belt for Food and Oil Resistance, Green [HS]7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gear Heads [NH][B] Oriental Motor / [C] Motor made in Taiwan / [R] No Motor Gear Head40Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]No Motor [NV]----

-

1 Piece(s) 21 Day(s) or more 50 ～ 300500 ～ 30005 ～ 100Belt for Food and Oil Resistance, Green [HS]7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gear Heads [NH][B] Oriental Motor / [C] Motor made in Taiwan / [R] No Motor Gear Head40Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]-200---

-

1 Piece(s) 21 Day(s) or more 50 ～ 300500 ～ 30005 ～ 100Belt for Food and Oil Resistance, Green [HS]7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gear Heads [NH][B] Oriental Motor / [C] Motor made in Taiwan / [R] No Motor Gear Head40Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]--200 ～ 230--

-

1 Piece(s) 21 Day(s) or more 50 ～ 300500 ～ 30005 ～ 100Belt for Food and Oil Resistance, Green [HS]7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gear Heads [NH][B] Oriental Motor / [C] Motor made in Taiwan / [R] No Motor Gear Head40Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]---100 ～ 200-

-

1 Piece(s) 21 Day(s) or more 50 ～ 300500 ～ 30005 ～ 100Belt for Food and Oil Resistance, Green [HS]7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gear Heads [NH][B] Oriental Motor / [C] Motor made in Taiwan / [R] No Motor Gear Head40Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]----100 ～ 230

Loading...

  1. 1

Example

 

Basic Information

Drive Module Position Head Drive Belt Type Flat Belt Meandering Prevention Pulley crowned for meandering prevention
Tail Roller Dia. D (Tail Transfer Part R)(mm) 50 Drive Roller Dia.(mm) 50 Reverse Switch Option Not Provided

Payment Method

Credit Card
  • American Express
  • Diners Club
  • MasterCard
  • RuPay
Debit Cart
  • VISA
  • MasterCard
  • Maestro
  • RuPay
Net Banking
  • State Bank of India
  • ICICI Bank
  • HDFC Bank
  • Kotak Mahindra Bank
  • Axis Bank
UPI
  • Bharat Interface for Money
  • PhonePe
  • Google Pay
  • paytm
  • WhatsApp
  • BharatQR
Cheque on delivery
  • Cheque on delivery
Online payment
  • easebuzz
  • qr code

Customer Service

My Account

About MISUMI

Related Sites

Social Media

  • LinkedIn
  • YouTube
  • Twitter

MISUMI India Contact

Customer Service

  • Tel:+91-124-468-8800　(9:00AM - 5:30PM Monday to Saturday)
  • Mail:CS@misumi.co.in　(English Only)
Web Inquiry

日本語でのお問い合わせはジャパンデスクまで

  • Tel:+91-124-468-8808　(9:00AM - 5:30PM 月-金、9:00AM - 1:00PM 土)
  • Mail:japandesk@misumi.co.in　(Japanese Language Only)
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.

X
whatsapp-qr whatsapp-icon