• MISUMI India HO Gurgaon & Pune regional office will be closed on 21st Oct, 2019 on account of assembly elections in Haryana & Maharashtra constituencies.

[Motorized] X-Axis - Linear Ball, CAVE-X POSITIONER

[Motorized] X-Axis - Linear Ball, CAVE-X POSITIONER

(i)Caution

  • Please confirm the suitable power supply for each motor option.
    5-Phase Stepping Motor with Brake (MA) works with single-phase AC100-120V.
    α-Step Motor (PA) works with DC24V.
    AC Servo Motor (U) works with single-phase or three-phase AC200-230V.
  • After November 1, 2018, there will be some slight specification changes of photo Sensor as below.
    [Current Type]EE-SX4134→[New Type]EE-SX4320
High Precision Motorized X-Axis, Linear Ball Slide Stages:Related Image
[ ! ]For the detailed dimensions of CAVE-X Positioner with the Motor P installed, see the applicable CAD data.

[ M ] Material:SUS440C Equivalent
[ S ] Surface Treatment: Electroless Nickel Plating
[ A ] Accessory: SCB4-12 (4 pcs.)

Specifications

 Part Number-Motor-Cable
 XCV620-C-N
Part NumberMotorCableMechanical StandardsAccuracy Standards
Stage Surface (mm)Travel Distance (mm)Weight
(kg)
Unidirectional Positioning AccuracyMoment Rigidity ("/N•cm)PitchingYawing
PitchingYawingRolling
XCV620C
(Standard)
F
(High Torque)
G
(High Resolution)
MA
(With Electromagnetic Brake)
PA
(α-Step)
N
(Cable not included (separately sold))
M
(For Motor with Electromagnetic Brake)
P
(For α-Step)
[ ! ]For combination of motors and cables, see the table below.
60×60200.78
(0.87)
5µm or less0.080.050.0520" or less15" or less
XCV63060×70300.9
(0.99)
5µm or less0.080.050.0520" or less15" or less
[ ! ]*1 For motor options MA and PA, the driver is included in the set. With option MA, only cable option M is selectable. With option PA, only cable option P is selectable. In both cases, cable option N (no cable) is not selectable.
*1: The value differs depending on the type of motor. The above raw values are for stages incorporating Motor C (Standard) and the values in ( ) for stages incorporating Motor F (High Torque).
 

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
XCV620-C-N
XCV620-F-N
XCV620-G-N
XCV620-PA-P
XCV630-C-N
XCV630-F-N
XCV630-G-N
XCV630-PA-P
Part NumberVolume DiscountDays to ShipRoHSMotor, Motor Characteristics Resolution
(µm)
Table Length
(mm)
Stroke (X Distance)
(mm)
Maximum Speed
(mm/sec)
Table Straightness
(µm)
Table Parallelism
(µm)
Moment Rigidity (Pitching)
("/N•cm)
Moment Rigidity (Yawing)
("/N•cm)
Moment Rigidity (Rolling)
("/N•cm)
13 Day(s) or more 105-Phase Stepping Motor2µm6020203150.080.050.05
13 Day(s) or more 105-Phase Stepping Motor - High Torque2µm6020303150.080.050.05
13 Day(s) or more 105-Phase Stepping Motor - High Resolution1µm6020203150.080.050.05
13 Day(s) or more 10[α-Step Motor] α-Step Motor1µm6020203150.080.050.05
13 Day(s) or more 105-Phase Stepping Motor2µm7030203150.080.050.05
13 Day(s) or more 105-Phase Stepping Motor - High Torque2µm7030303150.080.050.05
13 Day(s) or more 105-Phase Stepping Motor - High Resolution1µm7030203150.080.050.05
13 Day(s) or more 10[α-Step Motor] α-Step Motor1µm7030203150.080.050.05

Loading...

  1. 1

More Information

■Motor/Cable Application Table

Motor/Cable
Application Table
MotorCable
C,F,GN (Not Provided)
MAM
PAP

[ ! ]For the cable for C, F or G, see MSCB_on P.1-2014-3 
 
■Max. speed

Motor(mm/sec)
C30
F35
G25
MA25
PA40

Note that the speed and positioning time will vary depending on the usage conditions.
The values shown here are MISUMI’s reference values. Operation at these values is not guaranteed.

High Precision Motorized X-Axis, Linear Ball Slide Stages:Related Image
High Precision Motorized X-Axis, Linear Ball Slide Stages:Related Image
High Precision Motorized X-Axis, Linear Ball Slide Stages:Related Image
High Precision Motorized X-Axis, Linear Ball Slide Stages:Related Image

 

■Recommended Homing Method
Type3After detection is executed in the CCW direction, the process of detecting in the CCW direction is begun based on the ORG signal.
Type4After detection is executed in the CW direction, the process of detecting in the CW direction is begun based on the ORG signal.
Type9After Type 3 is executed, the process of detecting in the CCW direction is begun based on the TIMING signal.
Type10After Type 4 is executed, the process of detecting in the CW direction is begun based on the TIMING signal.
■Electrical Specifications
MotorCFGMAPA
StandardHigh TorqueHigh ResolutionWith brakeTuningless
MotorType5-Phase Stepping Motor 0.75A/Phase (Oriental Motor Co., Ltd.)α- Step Motor
Step Angle0.72°0.72°0.36°0.72°0.36°
ConnectorApplicable Receptacle ConnectorHR10A-10P-12S(73)(Hirose Electric Co., LTD.)motor side:5557-06P-210
electromagnetic brake side:
5557-02P-210(MOLEX)
43020-1000 (MOLEX)
SensorLimit SensorProvided
Home SensorPhotomicrosensor: EE-SX4320 (OMRON Corp.)
Near Home Sensor-
Power Supply VoltageDC5~24V ±10%
Current Consumption60mA or less in Total
Control OutputNPN Open Collector Output DC5~24V, 8mA or less
Residual Voltage 0.3V or less (when load current is 2mA)
Output LogicDetecting (Dark): Output Transistor OFF (Non-Conducting)
[ ! ]Sensors with Part Number EE-SX4134 will be discontinued and replaced by next-generation products with Part Number EE-SX4320 from November 2018.

■Common Specifications
Feed ScrewBall Screw Ø8, Lead 1
GuideLinear Ball Guide
Resolution*2Full2μm/Pulse (1μm/Pulse) *3
1μm/Pulse (0.5μm/Pulse) *3
Half
Fine
(Upon 1/20 partitioned)
0.1μm(0.05μm)
Max. Speed*420mm/sec(30mm/sec)*5
(Pulse Rate: 5kHz)
Positioning repeatability±0.5μm or less
Load Capacity49N
Lost Motion1μm or less
Backlash1μm or less
Straightness3μm or less
Parallelism15μm or less
Motion Parallelism10μm or less

*2 This represents the travel distance of stage per one pulse signal.
*3 The values in ( ) are for Motor Option G (High Resolution).
*4 This represents the max. speed that can be driven by the recommended controller switched to Full Step mode,
with the max. load applied. (The value differs depending on the current driving controller and the current load.)
*5 The values in ( ) are for Motor Option F (High Torque).
High Precision Motorized X-Axis, Linear Ball Slide Stages:Related ImageThe value differs depending on the motor option.

 

Basic Information

Type X-Axis Motorized Stage Material SUS440C Guide Linear Ball Guide
Table Feeding Method Ball Screw Table Width(mm) 60 Surface Treatment Electroless Nickel Plating
Through Hole (Table Center Hole) Not Provided Load Capacity (Range)(N) 30.1~50 Load Capacity(N) 49
Positioning Accuracy(µm) 5 Sensor Limit + Home

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation
TEL:124- 468-8841 / FAX:124-468-8811
9:00am - 5:30pm (Monday -Saturday)