(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.

Tel: 0124-4688 800 Email: cs@misumi.co.in 9:00am - 5:30pm (Monday to Saturday)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand

Search by Category

Quote / Order

This translation is a Google translation यह अनुवाद एक Google अनुवाद है இந்த மொழிபெயர்ப்பு ஒரு கூகுள் மொழிபெயர்ப்பு ಈ ಅನುವಾದವು Google ಅನುವಾದವಾಗಿದೆ

Start chat

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(4,756 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

TTPA14-AT10150-A-C[10,12,15,16,18,19,20]

Specification/Dimensions

Belt Type
AT5

AT10
Clear
Belt Width Used(mm)
10

15

20

25
Clear
No. of Teeth(T)
14

15

16

18

20

22

24

25

26

28

30

32

36

40

44

48

50

60
Clear
Pulley Shape
- Shape A
- Shape B
Clear
Surface Treatment
- Clear Anodize
- Black Anodize
- Hard Clear Anodize
- Electroless Nickel Plating
Clear
Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)
[5-85/1mm Unit(s)]
Clear
Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N](mm)
8

10

11

12

13

55
[10-50/1mm Unit(s)]
Clear
Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C](mm)
10

12

15

16

18

19

20
Clear
Shaft Bore Specifications (Round Hole + Tap) [P](mm)
5

6

6.35

7

8

9

10
[5-70/1mm Unit(s)]
Clear
Shaft Bore Specifications (Round Hole) [H](mm)
[5-85/1mm Unit(s)]
Clear
Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]
10
Clear
Shaft Bore Specifications (Stepped Hole) [V](mm)
5

6

6.35

7

8

9

10
[5-85/1mm Unit(s)]
Clear
Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)
5

6

6.35

7

8

9

10
[6-53/1mm Unit(s)]
Clear
Shaft Bore Specifications (Two-stepped Hole) [WB](mm)
[5-85/1mm Unit(s)]
Clear
type
- TTPA□□-AT10
- TTPA□□-AT5
- TTPB□□-AT10
- TTPB□□-AT5
- TTPK□□-AT10
- TTPK□□-AT5
- TTPN□□-AT10
- TTPN□□-AT5
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

7 Day(s) or Less

8 Day(s) or Less

9 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

Timing Pulleys - AT5 / AT10 Type

Name: Timing Pulleys - AT5 / AT10 Type
Brand: MISUMI
Availability: PreOrder

Brand :

MISUMI

Part Number :

TTPA14-AT10150-A-C[10,12,15,16,18,19,20]

TTPA14-AT10150-A-H[10-32/1]

TTPA14-AT10150-A-N[10-26/1]

TTPA14-AT10150-A-NK10

TTPA14-AT10150-A-P[10-26/1]

TTPA14-AT10150-A-V[10-30/1]

TTPA14-AT10150-A-WB[10-30/1]

TTPA14-AT10150-A-Y[10-30/1]

TTPA14-AT10150-B-C[10,12,15,16,18]

TTPA14-AT10150-B-F[10-28/1]

TTPA14-AT10150-B-H[10-30/1]

TTPA14-AT10150-B-N[10-18/1]

TTPA14-AT10150-B-NK10

TTPA14-AT10150-B-P[10-24/1]

TTPA14-AT10150-B-V[10-28/1]

TTPA14-AT10200-A-C[10,12,15,16,18,19,20]

TTPA14-AT10200-A-H[10-32/1]

TTPA14-AT10200-A-N[10-26/1]

TTPA14-AT10200-A-NK10

TTPA14-AT10200-A-P[10-26/1]

TTPA14-AT10150-A-C[10,12,15,16,18,19,20]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.

Product Description

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

[Material]
· Pulley: Aluminum alloy
· Flange: Aluminum alloy
[Surface treatment]
· Clear anodize, black anodize, hard clear anodize (firm hardness 300HV~), electroless nickel plating

■AT5

● Pulley Shape

Shape A

Shape B

Standard Tooth Profile

Tooth groove dimensions slightly vary according to the number of teeth. (AT5 Pitch: 5.0mm)

■Belt Nominal Width / Dimensions

mm	Nominal
mm	AT5100	AT5150
A	11.6	16.6
W	16.5	21.5
L Number of Teeth: 15, 16	25.0	30.0
L Number of Teeth: 18 to 28	27.0	32.0
L Number of Teeth: 30 to 60	29.0	34.0

■Tapped Hole Dimensions (Shaft Bore Specs.: P, N, C)

d_H7 Shaft Bore I.D.	M (Coarse)	Accessory Set Screws
5	M3	M3 × 3
6 to 12	M4	M4 × 3
13 to 17	M5	M5 × 4
18 to 30	M6	M6 × 5
31 to 45	M8	M8 × 6
46 to 50	M10	M10 × 8

* 1 Shaft Bore Specs. H (Round Hole), V or F (Stepped Hole), Y (Both Sides Stepped Hole) and WB (Two-stepped Hole) do not have tapped holes.
[ ! ] The tolerance of the tap position dimension from the boss end face and pulley end face is ±0.3.
[ ! ] Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.

Shaft Bore Specification Select shaft bore spec mark and each dim. from the table below. [!] Surface treatment may not be applied to the shaft bores.

H round hole

P Round Hole + Tap

N New JIS Keyway + Tap
C Old JIS Keyway + Tap

[ ! ] For A-Shape pulley, the screw
holes are set at around 90° to keep
away from peaks.

V stepped hole

F Stepped Hole
(Counterbored Hole on the Hub Side)

Y Both Ends Stepped Hole

WB Two-stepped hole

[ ! ] Z - d ≥ 2
[!] Shape A: 2.0 ≤ J ≤ W－2.0
　　Shape B: 2.0 ≤ J ≤ L－2.0

[ ! ] Applicable to Shape B only
[ ! ] Z - d ≥ 2
[ ! ]2.0 ≤ J ≤ L－2.0

[ ! ] Applicable to Shape A only
[ ! ] Q (R)－Y (d) ≥ 2
[ ! ]S+T ≤ W－3.0
[ ! ]S (T) ≥ 3.0

[ ! ] Applicable to Shape A only
[ ! ]Q－R ≥ 2
[ ! ] R－WB (d) ≥ 2
[ ! ]S+T ≤ W－3.0
[ ! ]S (T) ≥ 3.0

Type	Belt Width		[M] Material		[S] Surface Treatment	[A] Accessory Set Screws
	AT5		Pulley	Flange
	10 mm	15 mm
	AT5100	AT5150
TTPA	●	●	Aluminum alloy	Aluminum alloy	Clear Anodize	SUS304
TTPB	●	●			Black Anodize
TTPK	●	●			Hard Clear Anodize
TTPN	●	●			Electroless nickel plating
TTPS	●	●	SUS304	SUS304	—	SUS304

[ ! ]Flange is already swaged, and set screws are included for Shaft Bores P, N and C.

Specification Table

Part number

—

Pulley Shape

—

Shaft Bore Specs.: I.D.

—

(Shaft Bore Specs.: H, P, N, C)

TTPA30−AT5150

—

NK10

(Shaft Bore Specs.: V, F)

TTPA50−AT5150

—

F20

—

Z30

—

J20.0

(Shaft Bore Specs.: Y, WB)

TTPA24−AT5150

—

Y10

—

Q18

—

R18

—

Part number			Pulley Shape	Pulley Shape						P.D.	O.D	D	F	E
Type	Number of Teeth	Type Nominal Width		A			B
				Shaft Bore Specs.: 1 mm Increments / Selectable
				H (d) Round Hole V (d), Y (d), WB (d) Z·Q·R Stepped Hole	P (d) Round Hole + Tapped	N (d), C (d) Keyway + Tapped	H (d) Round Hole V (d), F (d), Z Stepped Hole	P (d) Round Hole + Tapped	N (d), C (d) Keyway + Tapped
Aluminum TTPA TTPB TTPK TTPN Stainless Steel TTPS	15	AT5100 AT5150	A B	5 to 14	5 to 10	8·10	5 to 10	5 to 8	—	23.87	22.65	13	28	18
	16			6 to 16	6 to 12	8 to 12	6 to 12	6 to 10	8	25.46	24.20	16	32	20
	17									27.06	25.81
	18			6 to 18	6 to 12	8 to 12	6 to 12	6 to 11	8·10	28.65	27.40		33	22
	19			6 to 20	6 to 16	8 to 16	6 to 16	6 to 12		30.24	29.00	20	36	24
	20									31.83	30.60
	21			7 to 23	7 to 18	8 to 18	7 to 16	7 to 15	8 to 12	33.42	32.23		40	27
	22									35.01	33.85
	23			7 to 26	7 to 20	8 to 20	7 to 22	7 to 17	8 to 13	36.61	35.43	25	45	30
	24									38.20	37.00
	25							7 to 18	8 to 15	39.79	38.60
	26			8 to 31	8 to 22	8 to 22	8 to 27	8 to 21	8 to 17	41.38	40.20	30	48	35
	27				8 to 24	8 to 24		8 to 22	8 to 18	42.97	41.78
	28									44.56	43.35
	29									46.15	44.95
	30			10 to 33	10 to 26	10 to 26	10 to 31	10 to 23	10 to 18	47.75	46.55	35	55	40
	31									49.34	48.13
	32			10 to 36	10 to 28	10 to 28	10 to 31	10 to 27	10 to 22	50.93	49.70
	33			10 to 41	10 to 30	10 to 30	10 to 36	10 to 30	10 to 25	52.52	51.28	40	61	45
	34									54.11	52.87
	35									55.70	54.46
	36									57.30	56.05
	37			10 to 46	10 to 38	10 to 38	10 to 40	10 to 35	10 to 29	58.89	57.66	45	67	50
	38									60.48	59.25
	39									62.07	60.84
	40									63.66	62.45
	41						12 to 40	12 to 35	12 to 30	65.25	64.03		74	58
	42									66.84	65.62
	43									68.44	67.22
	44			12 to 54	12 to 42	12 to 40				70.03	68.80
	45			12 to 56						71.62	70.39		80	60
	46									73.21	71.98
	47			12 to 59	12 to 45					74.80	73.57		83	63
	48									76.39	75.15
	49			12 to 63	12 to 47	12 to 45				77.99	76.76		87	67
	50									79.58	78.35
	51									81.17	79.94
	52									82.76	81.53
	53									84.35	83.12		95	75
	54									85.94	84.71
	55									87.54	86.31
	56									89.13	87.90
	57			12 to 76	12 to 50	12 to 50				90.72	89.49		99	80
	58									92.31	91.08
	59									93.90	92.67
	60									95.49	94.25
[NG]Shaft Bore Dia.9 is not available for Shaft Bore Spec. N. [!]Shaft Bore Dia.6.35 is selectable for Shaft Bore Specs. H, P, V, and F. [!]NK10 is selectable for Shaft Bore Spec. N. [NG]Shaft Bore Dia. 8, 11, 13, 14, 17, or 21 to 50 are not available for Shaft Bore Spec. C.

Alterations

Part number

—

Pulley Shape

—

Shaft Bore Specs.: I.D.

—

(KC90, etc.)

TTPA18 − AT5100

—

P10

—

NFC

Alterations	Set Screw Angle Change	No Flange	Single Flange	Flange Cut
Code	KC90	NFC	RFC·LFC	FC
Spec.	Changes an angle of set screw to 120°. [ ! ] For A-Shape pulley, the screw holes are set at around 120° to keep away from peaks.	(Flange 2 pcs. Included) Ordering Code NFC	(Flange 1 pc. Included) Ordering Code RFC	Cut the flange O.D. in 0.5 mm increments. Ordering Code FC17 Application Notes [ ! ]FC ≥ (O. D.) +1 [ ! ]FC ≤ F－2 [ ! ] No surface treatment is applied on flange circumference.

Alterations

Retaining Ring Groove

Taper for Bearing Holder

Hub Shortening

Tapped Hole Dimensions

Included Set Screw Length Change

Code

SRG

BTC

TPC

SLH

Spec.

Retaining Ring Groove applicable to the shaft dia. of stepped hole is machined.

Specify SRG 2.5 to 24 mm
　　　　　0.5 mm Increments
Applicable Conditions [ ! ] Minimum Thickness: 2 mm
[ ! ] Applicable to Shaft Bore Specs. V and F only
[ ! ] Standards of retaining ring groove for Z dim. is applied
　　　
[ ! ] n ≤ J−SRG−m
Ordering Code SRG7

Taper for retaining bearing inner ring
　
Ordering Code BTC4−TL1.5
Application Notes
[ ! ] Applicable to Shape A only
[ ! ] Applicable to Shaft Bore Specs. H and P only
[ ! ]LT < L－W
[ ! ] When E-D ≤ 6, one side installed and 1 pc. of flange included
　　　

Cuts the hub length in 0.5 mm increments

Ordering Code BC6.5
Application Notes
[!] Shaft Bore Specs. H, V, F:
　　3 ≤ BC < L－W
[!] Shaft Bore Specs. P, N, C:
　　M+3 ≤ BC < L－W
[NG] Not applicable to Shape A

Ordering Code TPC5
Application Notes
[ ! ] Applicable to Shaft Bore Specs. P, N, C only
　　　
[NG] Not applicable to Shape A

M	TPC
M3	M4
M4	M3·M5
M5	M4·M6
M6	M5·M8
M8	M6·M10
M10	M8

Ordering Code SLH10
Application Notes
[ ! ] Applicable to Shaft Bore Specs. P, N, C only
　　　

Set Screws	SLH
M3 × 3	6
M4 × 3	5·8
M5 × 4	6·10
M6 × 5	10
M8 × 6	10·12
M10 × 8	12·15

Alterations	Add Side Holes [!] Conditions may vary depending on the shaft bore specs.
Alterations	Side Tapped Hole	Side Through Hole	Side Counterbored
Code	QTC·QFC·QSC	KTC·KFC·KSC	ZTC·ZFC·ZSC
Spec.	Machines tapped hole on the side surface of hub side. Ordering Code QTC28-M4 Q□C Selection Specify the hole position (P. C. D. dim.).　 M Selection M3, M4, M5, M6, M8 Application Notes [ ! ] Minimum Thickness: 2 mm [!] Conditions may vary depending on the shaft bore specs.	Machines through hole on the side surface. Ordering Code KTC28－K4.5 K□C Selection Specify the hole position (P. C. D. dim.).　 Specify K K4.0 to 13.0 (0.5 mm Increments) Application Notes [ ! ] Minimum Thickness: 2 mm [!] Conditions may vary depending on the shaft bore specs.	Machines counterbored hole on the side surface. Ordering Code ZTC28－ZM4 Z□C Selection Specify the hole position (P. C. D. dim.).　 ZM Selection ZM3, ZM4, ZM5, ZM6, ZM8 Application Notes [ ! ] Minimum Thickness: 2 mm [!] Conditions may vary depending on the shaft bore specs.
Spec.	(6 Locations) (4 Locations) (3 Locations)	(6 Locations) (4 Locations) (3 Locations)	(6 Locations) (4 Locations) (3 Locations)

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
TTPA14-AT10150-A-C[10,12,15,16,18,19,20]
TTPA14-AT10150-A-H[10-32/1]
TTPA14-AT10150-A-N[10-26/1]
TTPA14-AT10150-A-NK10
TTPA14-AT10150-A-P[10-26/1]
TTPA14-AT10150-A-V[10-30/1]
TTPA14-AT10150-A-WB[10-30/1]
TTPA14-AT10150-A-Y[10-30/1]
TTPA14-AT10150-B-C[10,12,15,16,18]
TTPA14-AT10150-B-F[10-28/1]
TTPA14-AT10150-B-H[10-30/1]
TTPA14-AT10150-B-N[10-18/1]
TTPA14-AT10150-B-NK10
TTPA14-AT10150-B-P[10-24/1]
TTPA14-AT10150-B-V[10-28/1]
TTPA14-AT10200-A-C[10,12,15,16,18,19,20]
TTPA14-AT10200-A-H[10-32/1]
TTPA14-AT10200-A-N[10-26/1]
TTPA14-AT10200-A-NK10
TTPA14-AT10200-A-P[10-26/1]
TTPA14-AT10200-A-V[10-30/1]
TTPA14-AT10200-A-WB[10-30/1]
TTPA14-AT10200-A-Y[10-30/1]
TTPA14-AT10200-B-C[10,12,15,16,18]
TTPA14-AT10200-B-F[10-28/1]
TTPA14-AT10200-B-H[10-30/1]
TTPA14-AT10200-B-N[10-18/1]
TTPA14-AT10200-B-NK10
TTPA14-AT10200-B-P[10-24/1]
TTPA14-AT10200-B-V[10-28/1]
TTPA14-AT10250-A-C[10,12,15,16,18,19,20]
TTPA14-AT10250-A-H[10-32/1]
TTPA14-AT10250-A-N[10-26/1]
TTPA14-AT10250-A-NK10
TTPA14-AT10250-A-P[10-26/1]
TTPA14-AT10250-A-V[10-30/1]
TTPA14-AT10250-A-WB[10-30/1]
TTPA14-AT10250-A-Y[10-30/1]
TTPA14-AT10250-B-C[10,12,15,16,18]
TTPA14-AT10250-B-F[10-28/1]
TTPA14-AT10250-B-H[10-30/1]
TTPA14-AT10250-B-N[10-18/1]
TTPA14-AT10250-B-NK10
TTPA14-AT10250-B-P[10-24/1]
TTPA14-AT10250-B-V[10-28/1]
TTPA15-AT10150-A-C[10,12,15,16,18,19,20]
TTPA15-AT10150-A-H[10-33/1]
TTPA15-AT10150-A-N[10-26/1]
TTPA15-AT10150-A-NK10
TTPA15-AT10150-A-P[10-26/1]
TTPA15-AT10150-A-V[10-31/1]
TTPA15-AT10150-A-WB[10-31/1]
TTPA15-AT10150-A-Y[10-31/1]
TTPA15-AT10150-B-C[10,12,15,16,18,19,20]
TTPA15-AT10150-B-F[10-29/1]
TTPA15-AT10150-B-H[10-31/1]
TTPA15-AT10150-B-N[10-20/1]
TTPA15-AT10150-B-NK10
TTPA15-AT10150-B-P[10-25/1]
TTPA15-AT10150-B-V[10-29/1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Belt Type	Belt Width Used (mm)	No. of Teeth (T)	Pulley Shape	Surface Treatment	Shaft Bore Specifications (Both Ends Stepped Hole) [Y] (mm)	Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N] (mm)	Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C] (mm)	Shaft Bore Specifications (Round Hole + Tap) [P] (mm)	Shaft Bore Specifications (Round Hole) [H] (mm)	Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]	Shaft Bore Specifications (Stepped Hole) [V] (mm)	Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F] (mm)	Shaft Bore Specifications (Two-stepped Hole) [WB] (mm)
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape A	Clear Anodize	-	-	10 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape A	Clear Anodize	-	-	-	-	10 ～ 32	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape A	Clear Anodize	-	10 ～ 26	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape A	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape A	Clear Anodize	-	-	-	10 ～ 26	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape A	Clear Anodize	-	-	-	-	-	-	10 ～ 30	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape A	Clear Anodize	-	-	-	-	-	-	-	-	10 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape A	Clear Anodize	10 ～ 30	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape B	Clear Anodize	-	-	10 ～ 18	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape B	Clear Anodize	-	-	-	-	-	-	-	10 ～ 28	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape B	Clear Anodize	-	-	-	-	10 ～ 30	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape B	Clear Anodize	-	10 ～ 18	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape B	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape B	Clear Anodize	-	-	-	10 ～ 24	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	14	Shape B	Clear Anodize	-	-	-	-	-	-	10 ～ 28	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape A	Clear Anodize	-	-	10 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape A	Clear Anodize	-	-	-	-	10 ～ 32	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape A	Clear Anodize	-	10 ～ 26	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape A	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape A	Clear Anodize	-	-	-	10 ～ 26	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape A	Clear Anodize	-	-	-	-	-	-	10 ～ 30	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape A	Clear Anodize	-	-	-	-	-	-	-	-	10 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape A	Clear Anodize	10 ～ 30	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape B	Clear Anodize	-	-	10 ～ 18	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape B	Clear Anodize	-	-	-	-	-	-	-	10 ～ 28	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape B	Clear Anodize	-	-	-	-	10 ～ 30	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape B	Clear Anodize	-	10 ～ 18	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape B	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape B	Clear Anodize	-	-	-	10 ～ 24	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	20	14	Shape B	Clear Anodize	-	-	-	-	-	-	10 ～ 28	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape A	Clear Anodize	-	-	10 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape A	Clear Anodize	-	-	-	-	10 ～ 32	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape A	Clear Anodize	-	10 ～ 26	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape A	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape A	Clear Anodize	-	-	-	10 ～ 26	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape A	Clear Anodize	-	-	-	-	-	-	10 ～ 30	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape A	Clear Anodize	-	-	-	-	-	-	-	-	10 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape A	Clear Anodize	10 ～ 30	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape B	Clear Anodize	-	-	10 ～ 18	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape B	Clear Anodize	-	-	-	-	-	-	-	10 ～ 28	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape B	Clear Anodize	-	-	-	-	10 ～ 30	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape B	Clear Anodize	-	10 ～ 18	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape B	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape B	Clear Anodize	-	-	-	10 ～ 24	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	25	14	Shape B	Clear Anodize	-	-	-	-	-	-	10 ～ 28	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape A	Clear Anodize	-	-	10 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape A	Clear Anodize	-	-	-	-	10 ～ 33	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape A	Clear Anodize	-	10 ～ 26	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape A	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape A	Clear Anodize	-	-	-	10 ～ 26	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape A	Clear Anodize	-	-	-	-	-	-	10 ～ 31	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape A	Clear Anodize	-	-	-	-	-	-	-	-	10 ～ 31
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape A	Clear Anodize	10 ～ 31	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape B	Clear Anodize	-	-	10 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape B	Clear Anodize	-	-	-	-	-	-	-	10 ～ 29	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape B	Clear Anodize	-	-	-	-	10 ～ 31	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape B	Clear Anodize	-	10 ～ 20	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape B	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape B	Clear Anodize	-	-	-	10 ～ 25	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	AT10	15	15	Shape B	Clear Anodize	-	-	-	-	-	-	10 ～ 29	-	-

Part Number

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Belt Type	Belt Width Used (mm)	No. of Teeth (T)	Pulley Shape	Surface Treatment	Shaft Bore Specifications (Both Ends Stepped Hole) [Y] (mm)	Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N] (mm)	Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C] (mm)	Shaft Bore Specifications (Round Hole + Tap) [P] (mm)	Shaft Bore Specifications (Round Hole) [H] (mm)	Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]	Shaft Bore Specifications (Stepped Hole) [V] (mm)	Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F] (mm)	Shaft Bore Specifications (Two-stepped Hole) [WB] (mm)

1
2
3
4
5
Next >>

Download (PDF)

Catalog (2 page view)

Product TOP

Basic Information

Type	Timing Pulleys	Material	Aluminum Alloy	Timing Pulley / Idler	Pulleys

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Top of the page

Payment Method

Credit Card

Debit Cart

Net Banking

UPI

Cheque on delivery

Online payment

Customer Service

My Account

About MISUMI

Related Sites

Social Media

MISUMI India Contact

Customer Service

Tel:+91-124-468-8800　(9:00AM - 5:30PM Monday to Saturday)
Mail:CS@misumi.co.in　(English Only)

Web Inquiry

日本語でのお問い合わせはジャパンデスクまで

Tel:+91-124-468-8808　(9:00AM - 5:30PM 月-金、9:00AM - 1:00PM 土)
Mail:japandesk@misumi.co.in　(Japanese Language Only)

Not a MISUMI customer yet?
Register and enjoy 20% Off
on your 1st order! *

Download CAD data and product data for more than 12 Mio. products.
Configure your drawing parts in the MISUMI Online Shop and save time and resources.
Reduce your process costs with the MISUMI Online Shop.

*Click here for 20% OFF T&C

Search by Category / Brand

Search by Category

How can we improve?

Configure

Specification/Dimensions

Belt Type

Belt Width Used(mm)

No. of Teeth(T)

Pulley Shape

Surface Treatment

Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)

Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N](mm)

Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C](mm)

Shaft Bore Specifications (Round Hole + Tap) [P](mm)

Shaft Bore Specifications (Round Hole) [H](mm)

Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]

Shaft Bore Specifications (Stepped Hole) [V](mm)

Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)

Shaft Bore Specifications (Two-stepped Hole) [WB](mm)

type

CAD

Days to Ship

Specify Alterations

Timing Pulleys - AT5 / AT10 Type

Copy Part Number URL to Clipboard

(i) Caution

2D/3D CAD ?

2D CAD Data with Dim. Fixed

Product Description

Specification Table

Alterations

Part Number

Basic Information

Payment Method

Customer Service

My Account

About MISUMI

Related Sites

Social Media

MISUMI India Contact

Customer Service

日本語でのお問い合わせはジャパンデスクまで

Comparison list

(i)
Caution