Flanged Linear Bushing - Compact, Double
Brand :
MISUMI
Caution
- Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.
Product Description
Linear Bushings Flanged Compact Type - Double
The linear bushing supports and guides a load, enabling smooth and accurate linear motion along a specified path. It provides a variety of sizes to choose from.
[Feature]
● Support Shaft Diameter (mm.): 6, 8, 10, 12, and 16
● Overall Length Minimum/Maximum (mm.): 35, 45, 55, 57, and 70
● Shape : Flanged Compact Type
● Flange Shape : Center Flanged with Round Flange, Square Flange, and Compact Flange
● Material:
- Outer Cylinder - SUJ2 Equivalent
- Ball - SUJ2 Equivalent
[Application]
It is used in industrial machinery such as conveyor systems, packaging machines, and robotic equipment.
Round Flange
Square flange
Compact Flange
dr = 6 to 12
dr = 16
| Type | Outer Cylinder | Balls | Retainer | Operating Ambient Temperature | [A] Accessory | ||||
| Round Flange | Square flange | Compact Flange | [M] Material | [H] Hardness | [S] Surface Treatment | [M] Material | [M] Material | ||
| LHRKW | LHSKW | LHCKW | SUJ2 Equivalent | 58HRC or more | — | SUJ2 Equivalent | Plastic (Duracon M90 Equivalent) | −20 to 80°C | Seal [M] Material Nitrile Rubber (−20 to 120°C) |
| LHRKWM | LHSKWM | LHCKWM | Electroless Nickel Plating | SUS440C Equivalent | |||||
Specification Table
| Part Number | |
LHRKW10 LHRKW12L LHRKW12G LHRKW12H | (L Type Greased) (G Type Greased) (H Type Greased) |
| dr | D Tolerance | L | H | T | d | d1 | t | r | P.C.D. | W | F | A | Eccentricity (Max.) * 1 | Balls Rows | Perpendicularity * 2 | Basic Load Rating | Allowable Static Moment (N⋅m) | Mass (g) | |||||||
| Tolerance | Surface Treatment Not Provided | Surface Treatment Provided | Tolerance | C (Dynamic) N | Co (Static) N | Round Flange | Square flange | Compact Flange | |||||||||||||||||
| 6 | 0 −0.01 | 10 | 0 − 0.011 | 0 − 0.015 | 35 | ±0.3 | 25 | 5 | 3.5 | 6 | 3.1 | 3 | 19 | 20 | — | 19 | 0.015 | 6 | 0.015 | 206 | 309 | 2.46 | 24 | 20 | 21 |
| 8 | 13 | 0 − 0.013 | 0 − 0.018 | 45 | 28 | 22 | 23 | — | 22 | 383 | 555 | 5.76 | 38 | 34 | 35 | ||||||||||
| 10 | 17 | 55 | 35 | 6 | 4.5 | 7.5 | 4.1 | 3.75 | 27 | 27 | — | 27 | 585 | 867 | 10.99 | 79 | 68 | 73 | |||||||
| 12 | 19 | 0 − 0.016 | 0 − 0.021 | 57 | 38 | 30 | 29 | — | 30 | 608 | 899 | 11.85 | 95 | 82 | 87 | ||||||||||
| 16 | 26 | 70 | 44 | 36 | 34 | 24 | 27 | 965 | 1431 | 23.48 | 154 | 135 | 141 | ||||||||||||
* 1. The maximum amount of misalignment between the center point of the outer diameter D and the center point of the inner diameter dr.
* 2. Perpendicularity of D to flange mounting surface.
[ ! ] Anti-rust oil is applied at the time of delivery.