Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

HBLFSSW8-45-SEC

Applicable Frame Width type Mounting Hole Alteration for Covers Accessory CAD Days to Ship

Specification/Dimensions

Applicable Frame Width(mm)
45

50

60

80

90

100

180

200
Clear
type
- HBLFSSW8-45
Clear
Mounting Hole Alteration for Covers
- C (Tap for Cover Mounting)
- Not Provided
Clear
Accessory
- Not Provided
- SEC (Screws with Captured Washers and Nuts Set)
- SEP (Screws, Post-Assembly Insertion Spring Nuts Set)
- SET (Screws, Nuts Set)
- SEU (Screws, Pre-Assembly Insertion Spring Nuts Set)
- SSP (Set of Stainless Steel Screw and Post-assy. Insertion Spring Nut)
- SST (Set of Stainless Steel Screws and Nuts)
- SSU (Set of Stainless Steel Screws and Pre-Assembly Insertion Spring Nuts)
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

7 Day(s) or Less
Clear

Specify Alterations

8-45 Series (Groove Width 10 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type (HBLFSSW8-45-SEC)

Name: 8-45 Series (Groove Width 10 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type
Brand: MISUMI
Price: 515 INR
Availability: InStock

8-45 Series (Groove Width 10 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type (HBLFSSW8-45-SEC)

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Brand :

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

A bracket with 2 mounting holes on 1 side. You can connect the frame more firmly.

Dimensional Drawing of 90 degree Brackets

HBLFSSW8-45

8-45 series (groove width 10 mm) - for single row grooves - Reversed bracket with protrusions, 4 mounting holes type: Related images

[M] Material: ADC12

Specification Table of 90 degree Brackets

Model

HBLFSSW8-45

・The price list below is current as of April 2011.
・To check the latest price, please click the "Check Price" button after confirming the model number.

Model	Mass (g)	Suitable bolts and T-nuts				Allowable load (N)
Model	Mass (g)	bolt	Quantity	T-Nut	Quantity	Allowable load (N)
HBLFSSW8-45	136	CBM8-20	4	HNTT8-8	4	3087

Additional Processing of 90 degree Brackets

Model	−	(C・SET・SST・SEU・SSU・SEP・SSP・SEC)
HBLFSSW8-45	−	SET
HBLFSSW8-45	−	C-SET

Alterations	Code	Spec.	Applicable bracket
Additional cover mounting holes	C	The 90 degree Brackets is tapped for mounting the cover (M5 on both sides) (Mounting screws are HCBM) .	HBLFSN8-45
			HBLFSNB8-45
			HBLFSNM8-45
			CHBLFSN8-45
			HBLFSN8-50
			HBLFSNK8-45
			HBLFSNE8−45
			HBLFSSW8-45

Alterations

Code

Spec.

Applicable bracket

Applicable bolts and nuts included

SET
SST
(stainless steel)
SEU
(pre-
assembly spring nut)
SSU
(pre-assembly
spring nut
stainless steel)
SEP
(post-
assembly spring nut)
SSP
(post-assembly
spring nut stainless
steel)
SEC ( bolt and nut
with washer )

The applicable bolts and nuts for attaching the bracket to the frame are included in the set.
(Added to the bracket price)

(Example) When HBLFSN8-45 is specified

	bolt		nut
Code	Model	Quantity	Model	Quantity
SET	CBM8-20	2	HNTT8-8	2
SST	SCB8-20		HNTTSN8-8
SEU	CBM8-20		HNTU8-8
SSU	SCB8-20		SHNTU8-8
SEP	CBM8-20		HNTP8-8
SSP	SCB8-20		SHNTP8-8
SEC	HCBST8-24		HNTT8-8

[ ! ] When specifying a part other than HBLFSN8-45, please check the appropriate bolts and nuts.

−

HBLFSN8-45

HBLFSNB8-45

HBLFSNM8-45

CHBLFSN8-45

HBLFSN8-50

HBLFSNK8-45

HBLFSNE8−45

HBLFSNT8-45

HBLFSSW8-45

[ ! ] The bolts for the black anodized bracket are HCBMTB (black trivalent chromate). [
! ] When specifying -SET, -SEU, or -SEP with a bracket other than the black anodized bracket, the included bolts are not RoHS compliant.

Additional Processing Details of 90 degree Brackets

■ Hole processing for cover installation (-C) of 90 degree Brackets
M5 tapped holes can be added on both sides.
Example of additional processing model: HBLFSSW8-45-C

■ Details 90 degree Brackets of applicable bolt and nut sets

Additional processing model	bolt		nut
Additional processing model	Model	Material	type	Model	Material	Stopper
SET	CBM8-20	iron	First in	HNTT8-8	iron	none
SST	SCB8-20	stainless	First in	HNTTSN8-8	stainless	none
SEU	CBM8-20	iron	First in	HNTU8-8	iron	Yes
SSU	SCB8-20	stainless	First in	SHNTU8-8	stainless	Yes
SEP	CBM8-20	iron	Later insertion	HNTP8-8	iron	Yes
SSP	SCB8-20	stainless	Later insertion	SHNTP8-8	stainless	Yes
SEC	HCBST8-24	Iron (with washer)	First in	HNTT8-8	iron	none

How to Use of 90 degree Brackets

Features of 90 degree Brackets: This type has a protrusion that fits into the frame groove.
The protrusion acts as a rotation stopper during fastening work, making it easy to work with.

Intersecting frames
are also possible.

Supported Frames
8-45 series for 45 and 90 square

Technical Information of 90 degree Brackets

■ 90 degree Brackets allowable load concept

As shown in the left figure, two frames are set up, a frame is placed between them, and two 90 degree Brackets are attached underneath, and the allowable load per unit is shown. The allowable load
here indicates the load at which the 90 degree Brackets can maintain its position (without breaking or slipping) when all mounting holes on the bracket are fixed with bolts and a load is applied.

How to Install the Washer Bolt (-SEC) of 90 degree Brackets

■ How to install bolts with spring washers (-SEC) of 90 degree Brackets

This product requires more care when tightening than other series of spring washer bolt sets, as the bolt head interferes with the bolt.
We will introduce how to install it.

STEP 1 Installation sequence

STEP 2 Tightening the hexagonal bolts

Tighten the hexagonal bolt securely. 8-45 series (groove width 10 mm) - for single row grooves - Reversed bracket with protrusions, 4 mounting holes type: Related images

Of the two holes, installation will be done through the hole mentioned above.

STEP 3 Adjust the position of the spring washer on the bolt

Then, press down on the spring washer part of the bolt with your hand.If you leave it in this state when you try to tighten the remaining bolts
, the heads of the previously tightened bolts
will interfere and installation will be impossible. 8-45 series (groove width 10 mm) - for single row grooves - Reversed bracket with protrusions, 4 mounting holes type: Related images

STEP 4 Tighten the hex bolt.
Finally, tighten the hex bolt by twisting it.

As you can see, care must be taken when attaching the washer.
In cases where it is difficult to pre-tighten one side, we recommend using the following product.

<Alternative> HBLFSSW8-45-SET,
which changes the bolts without changing the bracket (changes the bolt and nut set that is suitable for additional processing)

Similar Products of 90 degree Brackets

■ 90 degree Brackets with protrusion

There is a protrusion on the mounting surface to prevent rotation.

Product name	Bracket with protrusions (2x the number of holes)	Inverted bracket with protrusion	Bracket with protrusion on one side	Bracket with cover	Triangle Bracket
Product Photos			No protrusions on one side, can be connected to plate
Material	ADC12	ADC12	ADC12	ADC12	A6N01SS?T
Features	This large-size type uses twice as many bolts, allowing for a stronger connection to the frame.	The mounting surface has a protrusion, making it easy to position when mounting. This is the most conventional type.	The protrusion is on one side only and is useful when connecting frames/plates.	This type is equipped with a dustproof cover. Dust does not accumulate inside, making it hygienic.	This bracket has two mounting holes on one side, allowing for a more solid connection to the frame.
Representative Model	This product	HBLFSN8-45	HBLFSNK8-45	HBLFSNT8-45	HBLDSWT8-45

Related Items of 90 degree Brackets

■ 8-45 Series of 90 degree Brackets

Product name	Aluminum frame	Blind Joint	Frame cap	Groove cover	nut
photograph
Product page	Here	Here	Here	Here	Here

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
HBLFSSW8-45-SEC

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Applicable Frame Width (mm)	Mounting Hole Alteration for Covers	Accessory
	₹ 515.00	1 Piece(s)	Available	Same day	10	-	Not Provided	SEC (Screws with Captured Washers and Nuts Set)

Product TOP

Basic Information

Bracket Tape	Tabbed Brackets	Additional Functions (Tabbed Bracket)	Standard	Tab Position	Tabbed at Both Sides
Number of the Applicable Slots	1 Slot	Perpendicularity	No Standard	Series	MISUMI Brackets for 8-45 Series (Extrusion Slot Width 10mm)
Material	ADC12	Extrusion Series	HFS	Extrusion No.	8
Extrusion Size	For 45, 90, 100	Bracket Type	Tabbed Reversal Brackets	Applicable Screws	M8 Screws
Number of Extrusion Connection Holes	4

Please check the type/dimensions/specifications of the part HBLFSSW8-45-SEC in the 8-45 Series (Groove Width 10 mm) - For 1-Row Groove - Reversing Bracket With Protrusion, 4-Mounting Hole Type series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Product variants

Part Number
HBLFSSW8-45-C-SEP
HBLFSSW8-45-C-SET
HBLFSSW8-45-C-SEU
HBLFSSW8-45-SEP
HBLFSSW8-45-SET
HBLFSSW8-45-SEU

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Applicable Frame Width (mm)	Mounting Hole Alteration for Covers	Accessory
₹ 444.29	1 Piece(s)	Available	7 Day(s) or more	-	-	C (Tap for Cover Mounting)	SEP (Screws, Post-Assembly Insertion Spring Nuts Set)
₹ 407.15	1 Piece(s)	Available	7 Day(s) or more	-	-	C (Tap for Cover Mounting)	SET (Screws, Nuts Set)
₹ 444.29	1 Piece(s)	Available	7 Day(s) or more	-	-	C (Tap for Cover Mounting)	SEU (Screws, Pre-Assembly Insertion Spring Nuts Set)
₹ 415.72	1 Piece(s)	Available	7 Day(s) or more	-	-	Not Provided	SEP (Screws, Post-Assembly Insertion Spring Nuts Set)
₹ 379.00	1 Piece(s)	Available	Same day Stock	-	45 ～ 200	Not Provided	SET (Screws, Nuts Set)
₹ 415.72	1 Piece(s)	Available	7 Day(s) or more	-	-	Not Provided	SEU (Screws, Pre-Assembly Insertion Spring Nuts Set)

Search by Category / Brand

Search by Category

How can we improve?